[1] 2 >>> MLD-5.x / Systems / x86 Systeme (PC) / Volle Schneidequeue führt zu Problemen
 

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« on: December 13, 2016, 09:53:36 »
Ich habe nun angefangen meine Aufnahmen zu schneiden.
Die Aufnahmen liegen auf einem Nas und sind per fstab
"nfs rw nfsver=3 soft rsize=8192 wsize=8192 0 0"
eingebunden.
Wenn ich nun mehrere nacheinander zum schneiden fertig mache und ich die Queue packe, hängt sich das System auf - ich habe kein Bild mehr.
 Alle Aufnahmen werden mit 0 Minuten angezeigt.
Leider habe ich das Log nicht zu  Hand - sind die Logs bei jedem Reboot weg?
Könnt ihr hiermit schon was anfangen?
Logged

Offline mafe68

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 2389
  • Immer auf der Suche nach was neuem!
    • View Profile
    • Mediastreambox
Volle Schneidequeue führt zu Problemen
« Reply #1 on: December 13, 2016, 12:59:53 »
Du kannst dich mit einem anderen PC per SSH mit der MLD verbinden und dort über die Konsole die Log ansehen mit dem Befehl z.B.
Code: [Select]
tail -f /var/log/massagesDa hast du einen Live Log und wenn dein System abstürzt siehst du im Log gleich was los ist.
Logged
Gruß Mario
Meine Hardware (show / hide)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20359
    • View Profile
    • ClausMuus.de
Volle Schneidequeue führt zu Problemen
« Reply #2 on: December 13, 2016, 16:30:21 »
Wenn Du im Setup den Loglevel größer stellst, bleiben die Logs auch beim einem Reboot erhalten.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #3 on: December 13, 2016, 16:39:09 »
Steht auf 2 und log size ist leer. Was sollte ich wo einstellen?
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20359
    • View Profile
    • ClausMuus.de
Volle Schneidequeue führt zu Problemen
« Reply #4 on: December 13, 2016, 17:38:21 »
Das reicht aus damit die Logs den Reboot überleben.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #5 on: December 13, 2016, 17:42:22 »
konnte ich so nicht feststellen.
ABer nun back2topic:
Code: [Select]
...
Dec 13 17:00:53 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:00:53 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:00:53 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:00:53 (MLD) user.err vdr: [1551] ERROR: 'toIndex' during editing process
...
Dec 13 17:03:39 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:39 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:03:46 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:53 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:53 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:03:54 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:54 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:03:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:03:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:03:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:03:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:00 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:01 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:02 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:02 (MLD) user.err vdr: [softhddev] empty video packet 139 bytes
Dec 13 17:04:04 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:06 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:07 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:15 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:20 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:25 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:29 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:38 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:38 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:38 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:38 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:39 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:39 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:39 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:40 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:40 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:40 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:42 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:42 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:43 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:44 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:45 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:46 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:49 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:51 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:52 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:53 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:55 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:58 (MLD) user.err vdr: video: decoder buffer empty, duping frame (33880/6) 0 v-buf
Dec 13 17:04:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:04:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:01 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:02 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:02 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:05 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:07 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:09 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:16 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:17 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:36 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:38 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:48 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:48 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:05:50 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:50 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:05:55 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:55 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:05:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:05:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:06:04 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:04 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:05 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:05 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:06 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:07 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:09 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:14 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:14 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:06:16 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:16 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:06:17 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:17 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:18 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:18 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:19 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:19 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:20 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:21 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:22 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:26 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:27 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:29 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:31 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:06:31 (MLD) user.err vdr: [softhddev] empty video packet 139 bytes
Dec 13 17:06:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:08 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:12 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:15 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:17 (MLD) user.err vdr: video: decoder buffer empty, duping frame (34352/6) 0 v-buf
Dec 13 17:07:18 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:21 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:25 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:28 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:31 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:34 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:37 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:41 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:41 (MLD) user.err vdr: [softhddev] empty video packet 115 bytes
Dec 13 17:07:46 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:52 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:52 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:54 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:54 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:55 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:55 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:55 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:55 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:55 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:55 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:56 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:56 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:57 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:57 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:58 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:58 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:58 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:58 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:58 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:59 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:59 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:59 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:07:59 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:07:59 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:00 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:00 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:00 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:00 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:00 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:00 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:00 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:00 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:01 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:01 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:01 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:01 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:01 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:01 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:02 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:02 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:02 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:02 (MLD) user.err vdr: video: get hwaccel context, not supported
Dec 13 17:08:05 (MLD) user.err vdr: audio: can't set channels 2 sample-rate 0Hz
Dec 13 17:08:27 (MLD) user.info vdr: [1526] loading /data/tv/_alte_Aufnahmen_/_Tim_/Ein_Monster_in_Paris/2014-05-16.20.13.30-0.rec//marks
Dec 13 17:08:27 (MLD) user.info vdr: [1526] info: Aufzeichnung der Schnitt-Warteschlange hinzugefügt
Dec 13 17:08:28 (MLD) user.info vdr: [1551] loading /data/tv/_alte_Aufnahmen_/_Tim_/Ein_Monster_in_Paris/2014-05-16.20.13.30-0.rec//marks
Dec 13 17:08:28 (MLD) user.info vdr: [1551] loading /data/tv/_alte_Aufnahmen_/_Tim_/Ein_Monster_in_Paris/2014-05-16.20.13.30-0.rec//marks
Dec 13 17:08:28 (MLD) user.info vdr: [1551] loading /data/tv/_alte_Aufnahmen_/_Tim_/Ein_Monster_in_Paris/2014-05-16.20.13.30-0.rec//marks
Dec 13 17:08:28 (MLD) user.err vdr: [1551] ERROR (recording.c,2510): /data/tv/_alte_Aufnahmen_/_Tim_/Ein_Monster_in_Paris/2014-05-16.20.13.30-0.rec/index: Too many open files
Dec 13 17:08:28 (MLD) user.err vdr: [1551] ERROR (recording.c,2530): /data/tv/_alte_Aufnahmen_/_Tim_/%Ein_Monster_in_Paris/2014-05-16.20.15.30-0.rec/index: Too many open files
Dec 13 17:08:28 (MLD) user.err vdr: [12133] ERROR (recording.c,2904): /data/tv/_alte_Aufnahmen_/_Tim_/%Ein_Monster_in_Paris/2014-05-16.20.15.30-0.rec/00001.ts: Bad file descriptor
Dec 13 17:08:28 (MLD) user.err vdr: [12133] ERROR (recording.c,2904): /data/tv/_alte_Aufnahmen_/_Tim_/%Ein_Monster_in_Paris/2014-05-16.20.15.30-0.rec/00001.ts: Bad file descriptor
Dec 13 17:08:28 (MLD) user.err vdr: [12133] ERROR (recording.c,2530): /data/tv/_alte_Aufnahmen_/_Tim_/%Ein_Monster_in_Paris/2014-05-16.20.15.30-0.rec/index: Too many open files
Dec 13 17:08:28 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:29 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:30 (MLD) user.err vdr: [1526] ERROR: Kann Schneidevorgang nicht starten!
Dec 13 17:08:30 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:31 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:32 (MLD) user.info vdr: [1526] info: Index-Datei wird regeneriert
Dec 13 17:08:32 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:33 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:34 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:35 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:36 (MLD) user.err vdr: [1526] ERROR (svdrp.c,125): Too many open files
Dec 13 17:08:37 (MLD) user.err vdr: [1526] ERROR: Regenerierung der Index-Datei fehlgeschlagen!
btw messages.0 hat nur 200kb
wie kann ich das auf 20mb oder so stellen?
so ist das in 5 sekunden voll
Logged

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #6 on: December 13, 2016, 18:29:11 »
Bei log size gibts du einfach 20000 ein und speicherst es.

Danach am besten nen reboot machen damit die Einstellung auch wirksam wird.
Logged
Gruß MegaX

Hardware (show / hide)

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #7 on: December 14, 2016, 16:12:00 »
Quote from: MegaX on December 13, 2016, 18:29:11
Bei log size gibts du einfach 20000 ein und speicherst es.

Danach am besten nen reboot machen damit die Einstellung auch wirksam wird.
Danke das hat geholfen


wer kann was zu dem wirklichen Problem Beitragen?
Logged

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #8 on: December 18, 2016, 18:38:10 »
sooo
eine lange google Suche brachte mir : http://serverfault.com/questions/610130/how-to-set-ulimit-value-permanently
wie seht ihr das?
 Ist das machbar, das dauerhaft per distribution gesetzt zu bekommen?
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20359
    • View Profile
    • ClausMuus.de
Volle Schneidequeue führt zu Problemen
« Reply #9 on: December 18, 2016, 19:07:17 »
Hi,

wenn das anlegen der vorgeschalgenen Konfigurationsdatei nicht hilft, kannst Du Dir unter /etc/init.d/ ein Skript erstellen, welches den benötigten Befehl beim booten ausführt. Als Vorlage kannst Du die Datei "example" benutzen.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #10 on: December 19, 2016, 11:13:00 »
geht beides irgendwie nicht
hier meine ulimit datei in init.d
Code: [Select]
#!/bin/sh

. /etc/init.d/rc.functions

NAME=${0##*/}

case "$1" in
start)
echo "Starting $NAME:"
#
# add here your start actions
#
ulimit -n 4096
;;
stop)
echo "Stopping $NAME:"
#
# add here your stop actions
#
check_status
;;
restart)
$0 stop
$0 start
;;
resume)
echo "Resume $NAME:"
#
# add here your resume actions
#
check_status
;;
suspend)
echo "Suspend $NAME:"
#
# add here your suspend actions
#
check_status
;;
init)
start=1     # enable start section
#stop=1      # enable stop section
#resume=1    # enable resume section
#suspend=1   # enable suspend section
#after=""    # init scripts that must be started before this
#before=""   # init scripts that should be started after this
;;
*)
echo "Usage: $0 {start | stop | restart}" >&2
exit 1
esac
auch ein start ulimit geht nicht
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20359
    • View Profile
    • ClausMuus.de
Volle Schneidequeue führt zu Problemen
« Reply #11 on: December 19, 2016, 12:29:27 »
Das sieht soweit OK aus. Was gibt denn ein "start ulimit" aus?

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #12 on: December 19, 2016, 12:43:41 »
also habe mal weiter analysiert.
Es zählt wohl nur für die aktive Session.
habe es händisch eingegeben und dann neu putty gemacht. da war es wieder weg.
somit ist es schwierig. Müsste schauen, was die Antwort von ulimit -a beim vdr prozess ist
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20359
    • View Profile
    • ClausMuus.de
Volle Schneidequeue führt zu Problemen
« Reply #13 on: December 19, 2016, 12:55:49 »
Dann müsstest Du das zum testen in der /etc/init.d/vdr setzen.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline masterpete

  • Adv. Member
  • ***
  • Posts: 223
    • View Profile
Volle Schneidequeue führt zu Problemen
« Reply #14 on: December 20, 2016, 19:16:25 »
kann ich das irgendwie testen in der vdr session den befehl ulimit -a absetzen und das ergebnis "abfangen"
Logged

[1] 2 >>> MLD-5.x / Systems / x86 Systeme (PC) / Volle Schneidequeue führt zu Problemen
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.