[wayne]

Hallihallo,

leider bleibt das Backup an der folgenden Stelle stehen und wird nicht fertig:

Code: [Select]

Installation startet
Partitioniere Laufwerk sdb
Formatiere Laufwerk sdb1
Formatiere Laufwerk sdb2
Formatiere Laufwerk sdb3
Installiere System auf sdb2

Code: [Select]

Nov 30 19:19:51 MLD user.info kernel: [  222.530468] usb 1-2: new high-speed USB device number 4 using xhci_hcd
Nov 30 19:19:51 MLD user.info kernel: [  222.658304] usb 1-2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
Nov 30 19:19:51 MLD user.info kernel: [  222.658323] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 30 19:19:51 MLD user.info kernel: [  222.658330] usb 1-2: Product: USB DISK
Nov 30 19:19:51 MLD user.info kernel: [  222.658336] usb 1-2: Manufacturer: SMI Corporation
Nov 30 19:19:51 MLD user.info kernel: [  222.658342] usb 1-2: SerialNumber: AA00000000011253
Nov 30 19:19:51 MLD user.info kernel: [  222.659366] usb-storage 1-2:1.0: USB Mass Storage device detected
Nov 30 19:19:51 MLD user.info kernel: [  222.661062] scsi host2: usb-storage 1-2:1.0
Nov 30 19:19:53 MLD user.notice kernel: [  224.078853] scsi 2:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 4
Nov 30 19:19:53 MLD user.notice kernel: [  224.080992] sd 2:0:0:0: Attached scsi generic sg1 type 0
Nov 30 19:19:53 MLD user.notice kernel: [  224.081246] sd 2:0:0:0: [sdb] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB)
Nov 30 19:19:53 MLD user.notice kernel: [  224.081934] sd 2:0:0:0: [sdb] Write Protect is off
Nov 30 19:19:53 MLD user.debug kernel: [  224.081938] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
Nov 30 19:19:53 MLD user.err kernel: [  224.083325] sd 2:0:0:0: [sdb] No Caching mode page found
Nov 30 19:19:53 MLD user.err kernel: [  224.083334] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Nov 30 19:19:53 MLD user.info kernel: [  224.087337]  sdb: sdb1 sdb2 sdb3
Nov 30 19:19:53 MLD user.notice kernel: [  224.089663] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Nov 30 19:19:53 MLD user.info kernel: [  224.750339] BTRFS: device fsid 886f88f4-111b-4dc8-b093-75996611e198 devid 1 transid 1343 /dev/sdb2 scanned by udevd (8384)
Nov 30 19:19:53 MLD user.warn kernel: [  224.772412] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Nov 30 19:19:54 MLD user.info kernel: [  224.883645] BTRFS info (device sdb2): disk space caching is enabled
Nov 30 19:19:54 MLD user.info kernel: [  224.883655] BTRFS info (device sdb2): has skinny extents
Nov 30 19:19:54 MLD user.notice kernel: [  224.887187] XFS (sdb3): Mounting V5 Filesystem
Nov 30 19:19:54 MLD user.info kernel: [  225.101129] XFS (sdb3): Ending clean mount
Nov 30 19:19:54 MLD user.warn kernel: [  225.109594] xfs filesystem being mounted at /media/usb-sdb3 supports timestamps until 2038 (0x7fffffff)
Nov 30 19:20:34 MLD daemon.err kernel: [  265.549445] udevd[736]: Specified group 'render' unknown
Nov 30 19:20:34 MLD daemon.err kernel: [  265.550062] udevd[736]: Specified group 'kvm' unknown
Nov 30 19:20:34 MLD user.notice kernel: [  265.559909] XFS (sdb3): Unmounting Filesystem
Nov 30 19:20:37 MLD user.info kernel: [  267.933912]  sdb: sdb1 sdb2 sdb3
Nov 30 19:20:37 MLD user.info kernel: [  267.947329]  sdb: sdb1 sdb2 sdb3
Nov 30 19:20:56 MLD user.info kernel: [  286.966249] BTRFS: device fsid a9b1f9b1-73e1-49e1-9319-206126114288 devid 1 transid 5 /dev/sdb2 scanned by mkfs.btrfs (9492)
Nov 30 19:21:08 MLD user.err kernel: [  298.878765] fuseblk: Unknown parameter 'subvol'
Nov 30 19:21:08 MLD user.err kernel: [  298.887751] UDF-fs: bad mount option "subvol=/" or missing value
Nov 30 19:21:08 MLD user.err kernel: [  298.888136] xfs: Unknown parameter 'subvol'
Nov 30 19:21:08 MLD user.info kernel: [  298.919910] BTRFS info (device sdb2): disk space caching is enabled
Nov 30 19:21:08 MLD user.info kernel: [  298.919922] BTRFS info (device sdb2): has skinny extents
Nov 30 19:21:08 MLD user.info kernel: [  298.919924] BTRFS info (device sdb2): flagging fs with big metadata feature
Nov 30 19:21:08 MLD user.info kernel: [  298.932895] BTRFS info (device sdb2): checking UUID tree
Nov 30 19:21:12 MLD user.info kernel: [  303.290331] BTRFS info (device sdb2): setting incompat feature flag for DEFAULT_SUBVOL (0x2)

[clausmuus]

Je nach Geschwindigkeit des USB Sticks, und des Umfangs des installierten Systems kann der Schritt einige Sekunden, oder auch Stunden dauern.

[wayne]

Nach knapp eine Stunde war's dann fertig. 

[clausmuus]

Bei einem durchschnittlich umfangreichen System, auf einen durchschnittlichen USB Stick dauert das Backup erstellen eine Minute. Bei mehr als 10 Minuten Dauer, hat man einen sehr langsamen USB Stick erwischt