[1] 2 3 4 >>> MLD-6.x / General / MLD 6.5 x86 Installation auf eMMC
 

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« on: March 28, 2025, 18:35:36 »
Hallo!

Lange ist es her, ich weiß nichtmal mehr wie lange. Die MLD funktioniert einfach so gut, dass man normalerweise keinen Support braucht. Aber nun ist es mal wieder so weit. Schön, dass hier immernoch so fleißig entwickelt wird. Ich habe die letzten Jahre mit der 5.4 verbracht, die mir immer treue Dienste geleistet hat. Aber man hat ja Ideen...

Ich habe mir einen Dell Wyse 3040 gekauft. Im Prinzip habe ich schon mehrere davon. Einer werkelt z.B. als 3D-Druck-Server. Und irgendwann kam die Idee. Darauf geht bestimmt auch die MLD!? Jap, tut sie. Zumindest live vom USB-Stick. Denn der interne eMMC Speicher wird von der MLD nicht erkannt und somit kann ich nicht darauf installieren.

Zum 3040:
Größe: 10x10x3cm, also echt klein das Gerätchen.
CPU: Intel Atom x5 z8350, also ein Tablet-Prozessor.
RAM: 2GB, nicht aufrüstbar, da fest verlötet. Für die MLD mehr als ausreichend.
Speicher: 8GB eMMC, per SDIO an die CPU angebunden, nicht aufrüstbar, da fest verlötet. Für die MLD mehr als ausreichend.
GPU: Intel Cherryview, Gen 8, läuft mit dem i965 und softhddevice. Es gibt 2x DP, kein HDMI. Man braucht einen Adapter. Nicht jeder funktioniert, es muss wohl ein "aktiver" Adapter sein.
Leistungsaufnahme: Es gibt ihn mit 5V 3A oder 12V 2A Netzteil. Die 12V Version läuft auch mit dem 5V Netzteil, andersherum knallt es! Die 5V Version läuft auch mit einem 10W USB Netzteil, ich schätze er braucht so um die 5 Watt. Die restlichen Reserven des Netzteils sind wohl für USB-Geräte vorgesehen, die man an den 3040 anschließen kann.
USB: 3x 2.0 und 1x 3.0 (3.1, 3.2 Gen wasweißich, ist jedenfalls eine blaue Buchse). Der 3040 lässt sich per USB (FLIRC) einschalten. Er reagiert dabei auf jede beliebige Taste. Muss im UEFI eingeschaltet sein.

Der eMMC Speicher ist (genau wie das interne WLAN und Bluetooth) per SDIO angebunden. WLAN und BT werden erkannt, der eMMC Speicher leider nicht. Ich kann nicht sagen was hier fehlt, vielleicht seht ihr das?
Der analoge Audioausgang funktioniert auch nicht, es fehlt wohl die Firmware? Audio via HDMI funktioniert aber.

https://www.parkytowers.me.uk/thin/wyse/3040/ <- Vorstellung mit vielen Infos bei Parkytowers.
https://github.com/carlansell94/wyse-3040-kernel-config <- Kernelkonfiguration und Hinweise, welche Firmwares verwendet werden, u.A. auch die die für den analogen Audioausgang benötigt werden.

Mein Debug-Log ist: VXzQCS, erstellt mit dem Live-USB-Stick.

Ich hoffe, ihr könnt mir insbesondere mit dem eMMC weiterhelfen. Der analoge Audioausgang ist nicht lebenswichtig. Ich brauche ihn eigentlich nicht, mir ist nur beim Testen aufgefallen, dass er nicht funktioniert.

Viele Grüße und ein fettes DANKESCHÖN für die vielen Jahre MLD. Ich benutze sie seit der 0.6.0!
Marcus
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #1 on: March 28, 2025, 19:05:14 »
Hi Marcus,

was gibt denn ein dmesg  aus.

Gruß,
  Roland
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #2 on: March 28, 2025, 20:00:17 »
Leider nicht viel, zumindest nichts was auf den eMMC Speicher schließen lässt.

Code: [Select]
Linux version 6.6.21-yocto-standard (oe-user@oe-host) (x86_64-mld-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240716) #1 SMP PREEMPT_DYNAMIC Tue Mar 19 16:42:51 UTC 2024
Command line: initrd=\initrd LABEL=normal net.ifnames=0
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007a6e9fff] usable
BIOS-e820: [mem 0x000000007a6ea000-0x000000007a719fff] reserved
BIOS-e820: [mem 0x000000007a71a000-0x000000007a746fff] ACPI data
BIOS-e820: [mem 0x000000007a747000-0x000000007a80efff] ACPI NVS
BIOS-e820: [mem 0x000000007a80f000-0x000000007abdbfff] reserved
BIOS-e820: [mem 0x000000007abdc000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
efi: EFI v2.4 by American Megatrends
efi: ACPI=0x7a723000 ACPI 2.0=0x7a723000 SMBIOS=0x7a9f7000 ESRT=0x7a9e7598 SMBIOS 3.0=0x7a9f6000 INITRD=0x7686b598
efi: Remove mem26: MMIO range=[0xfea00000-0xfeafffff] (1MB) from e820 map
e820: remove [mem 0xfea00000-0xfeafffff] reserved
efi: Not removing mem27: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem28: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
efi: Not removing mem29: MMIO range=[0xfed03000-0xfed03fff] (4KB) from e820 map
efi: Not removing mem30: MMIO range=[0xfed06000-0xfed06fff] (4KB) from e820 map
efi: Not removing mem31: MMIO range=[0xfed08000-0xfed09fff] (8KB) from e820 map
efi: Not removing mem32: MMIO range=[0xfed1c000-0xfed1cfff] (4KB) from e820 map
efi: Remove mem33: MMIO range=[0xfed80000-0xfedbffff] (0MB) from e820 map
e820: remove [mem 0xfed80000-0xfedbffff] reserved
efi: Not removing mem34: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem35: MMIO range=[0xffa00000-0xffffffff] (6MB) from e820 map
e820: remove [mem 0xffa00000-0xffffffff] reserved
SMBIOS 3.0.0 present.
DMI: Dell Inc. Wyse 3040 Thin Client/05MW5F, BIOS 1.2.5 08/20/2018
tsc: Detected 1440.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR map: 4 entries (2 fixed + 2 variable; max 18), built from 8 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
esrt: Reserving ESRT space from 0x000000007a9e7598 to 0x000000007a9e75d0.
Secure boot disabled
RAMDISK: [mem 0x752d5000-0x75893fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A723000 000024 (v02 DELL  )
ACPI: XSDT 0x000000007A7230A0 0000C4 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FACP 0x000000007A740728 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
ACPI: DSDT 0x000000007A7231F8 01D52A (v02 DELL   CBX3     01072009 INTL 20120913)
ACPI: FACS 0x000000007A80EF80 000040
ACPI: APIC 0x000000007A740838 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
ACPI: FPDT 0x000000007A7408C0 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FIDT 0x000000007A740908 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: MCFG 0x000000007A7409A8 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
ACPI: SSDT 0x000000007A7409E8 0041C5 (v01 DptfTb DptfTab  00001000 INTL 20120913)
ACPI: SSDT 0x000000007A744BB0 000654 (v01 CpuDpf CpuDptf  00001000 INTL 20120913)
ACPI: SSDT 0x000000007A745208 000058 (v01 LowPM  LowPwrM  00001000 INTL 20120913)
ACPI: UEFI 0x000000007A745260 000042 (v01 DELL   CBX3     00000000      00000000)
ACPI: SSDT 0x000000007A7452A8 000269 (v01 UsbCTb UsbCTab  00001000 INTL 20120913)
ACPI: HPET 0x000000007A745518 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
ACPI: SSDT 0x000000007A745550 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745CB8 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745F48 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
ACPI: LPIT 0x000000007A7460C8 000104 (v01 DELL   CBX3     00000005 MSFT 0100000D)
ACPI: BCFG 0x000000007A7461D0 000139 (v01 INTEL  BATTCONF 00000001 INTL 00000000)
ACPI: PRAM 0x000000007A746310 000030 (v01                 00000001      00000000)
ACPI: BGRT 0x000000007A746340 000038 (v00                 01072009 AMI  00010013)
ACPI: CSRT 0x000000007A746378 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
ACPI: WDAT 0x000000007A7464C8 000104 (v01                 00000000      00000000)
ACPI: Reserving FACP table memory at [mem 0x7a740728-0x7a740833]
ACPI: Reserving DSDT table memory at [mem 0x7a7231f8-0x7a740721]
ACPI: Reserving FACS table memory at [mem 0x7a80ef80-0x7a80efbf]
ACPI: Reserving APIC table memory at [mem 0x7a740838-0x7a7408bb]
ACPI: Reserving FPDT table memory at [mem 0x7a7408c0-0x7a740903]
ACPI: Reserving FIDT table memory at [mem 0x7a740908-0x7a7409a3]
ACPI: Reserving MCFG table memory at [mem 0x7a7409a8-0x7a7409e3]
ACPI: Reserving SSDT table memory at [mem 0x7a7409e8-0x7a744bac]
ACPI: Reserving SSDT table memory at [mem 0x7a744bb0-0x7a745203]
ACPI: Reserving SSDT table memory at [mem 0x7a745208-0x7a74525f]
ACPI: Reserving UEFI table memory at [mem 0x7a745260-0x7a7452a1]
ACPI: Reserving SSDT table memory at [mem 0x7a7452a8-0x7a745510]
ACPI: Reserving HPET table memory at [mem 0x7a745518-0x7a74554f]
ACPI: Reserving SSDT table memory at [mem 0x7a745550-0x7a745cb2]
ACPI: Reserving SSDT table memory at [mem 0x7a745cb8-0x7a745f47]
ACPI: Reserving SSDT table memory at [mem 0x7a745f48-0x7a7460c1]
ACPI: Reserving LPIT table memory at [mem 0x7a7460c8-0x7a7461cb]
ACPI: Reserving BCFG table memory at [mem 0x7a7461d0-0x7a746308]
ACPI: Reserving PRAM table memory at [mem 0x7a746310-0x7a74633f]
ACPI: Reserving BGRT table memory at [mem 0x7a746340-0x7a746377]
ACPI: Reserving CSRT table memory at [mem 0x7a746378-0x7a7464c3]
ACPI: Reserving WDAT table memory at [mem 0x7a7464c8-0x7a7465cb]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007bffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000008efff]
  node   0: [mem 0x0000000000090000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000001effffff]
  node   0: [mem 0x0000000020200000-0x000000007a6e9fff]
  node   0: [mem 0x000000007abdc000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 4608 pages in unavailable ranges
On node 0, zone DMA32: 1266 pages in unavailable ranges
On node 0, zone DMA32: 16384 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[mem 0x7ef00000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s190184 r8192 d31000 u524288
pcpu-alloc: s190184 r8192 d31000 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Kernel command line: initrd=\initrd LABEL=normal net.ifnames=0
Unknown kernel command line parameters "LABEL=normal", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 493838
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 1843952K/2007720K available (20480K kernel code, 2628K rwdata, 5652K rodata, 3572K init, 1808K bss, 163512K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 55939 entries in 219 pages
ftrace: allocated 219 pages with 6 groups
Dynamic Preempt: full
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
        Trampoline variant of Tasks RCU enabled.
        Rude variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=1440000)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 56K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,integrity
landlock: Up and running.
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350  CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
signal: max sigframe size: 1440
Estimated ratio of average max frequency by base frequency (times 1024): 1365
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 400.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (11520.00 BogoMIPS)
devtmpfs: initialized
ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x7a747000-0x7a80efff] (819200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
raid6: sse2x4   gen()  3544 MB/s
raid6: sse2x2   gen()  3461 MB/s
raid6: sse2x1   gen()  2636 MB/s
raid6: using algorithm sse2x4 gen() 3544 MB/s
raid6: .... xor() 1007 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8880016A9800 00059C (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8880019FD400 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88800164FA00 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88800162A000 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
ACPI: _OSC evaluated successfully for all CPUs
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: \_SB_.P12T: New power resource
ACPI: \_SB_.P12A: New power resource
ACPI: \_SB_.PCI0.ISP3.ID3C: New power resource
ACPI: \_SB_.USBC: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSCW.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC3.WWPR: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK3: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK4: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK2: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK1: New power resource
ACPI: \_SB_.P28X: New power resource
ACPI: \_SB_.P18X: New power resource
ACPI: \_SB_.P12X: New power resource
ACPI: \_SB_.P28P: New power resource
ACPI: \_SB_.P18P: New power resource
ACPI: \_SB_.P19X: New power resource
ACPI: \_SB_.P06X: New power resource
ACPI: \_SB_.P28T: New power resource
ACPI: \_SB_.P18D: New power resource
ACPI: \_SB_.P18T: New power resource
ACPI: \_SB_.P3P3: New power resource
ACPI: \_SB_.P28W: New power resource
ACPI: \_SB_.P18W: New power resource
ACPI: \_SB_.P12W: New power resource
ACPI: \_SB_.P33W: New power resource
ACPI: \_SB_.P33X: New power resource
ACPI: \_SB_.P4BW: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x9152c000-0x9152cfff 64bit]
pci 0000:00:11.0: [8086:2295] type 00 class 0x080501
pci 0000:00:11.0: reg 0x10: [mem 0x91529000-0x91529fff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0x91404000-0x91404fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x91400000-0x91403fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: on NUMA node 0
Low-power S0 idle used by default for system suspend
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKA disabled
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: \_SB_.PCI0.I2C4.CLK0: New power resource
Hardware (show / hide)

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #3 on: March 28, 2025, 20:00:54 »
Musste es splitten:

Code: [Select]
ACPI: \_SB_.PCI0.I2C4.CLK1: New power resource
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
efivars: Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x7a6ea000-0x7bffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x0400-0x047f] has been reserved
system 00:00: [io  0x0500-0x05fe] has been reserved
system 00:02: [mem 0x9152a000-0x9152afff] has been reserved
system 00:02: [mem 0x9151c000-0x9151cfff] has been reserved
system 00:02: [mem 0x9151a000-0x9151afff] has been reserved
system 00:02: [mem 0x91518000-0x91518fff] has been reserved
system 00:02: [mem 0x91527000-0x91527fff] has been reserved
system 00:02: [mem 0x91525000-0x91525fff] has been reserved
system 00:02: [mem 0x91523000-0x91523fff] has been reserved
system 00:02: [mem 0x91521000-0x91521fff] has been reserved
system 00:02: [mem 0x9151f000-0x9151ffff] has been reserved
system 00:02: [mem 0x9151d000-0x9151dfff] has been reserved
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: resource 9 [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: resource 10 [mem 0x7cf00001-0x7ef00000 window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
clocksource: Switched to clocksource tsc
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Key type cifs.idmap registered
SGI XFS with security attributes, no debug enabled
xor: measuring software checksum speed
   prefetch64-sse  :  5878 MB/sec
   generic_sse     :  5204 MB/sec
xor: using function: prefetch64-sse (5878 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 115
ACPI: AC: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ00] (0 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
brd: module loaded
loop: module loaded
e100: Intel(R) PRO/100 Network Driver
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2025-03-28T18:21:43 UTC (1743186103)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-pci 0000:00:11.0: SDHCI controller found [8086:2295] (rev 36)
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
u32 classifier
    input device check on
    Actions configured
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
NET: Registered PF_VSOCK protocol family
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (833002879, 3149613)->(903190600, -67038108)
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=no, fsverity=no
mmc0: new ultra high speed SDR104 SDIO card at address 0001
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usb 1-2: new full-speed USB device number 3 using xhci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input2
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input4
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input5
hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
Freeing initrd memory: 5884K
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
clk: Disabling unused clocks
ALSA device list:
  No soundcards found.
Freeing unused kernel image (initmem) memory: 3572K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (rodata/data gap) memory: 492K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    LABEL=normal
scsi 0:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
/dev/sda1: Can't open blockdev
ext3: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext2: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext4: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
squashfs: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
xfs: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
/dev/sda1: Can't open blockdev
ext3: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext2: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext4: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
squashfs: Unknown parameter 'umask'
xfs: Unknown parameter 'umask'
loop0: detected capacity change from 0 to 423880
loop1: detected capacity change from 0 to 423880
systemd[1]: systemd 255.4^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <MLD>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Starting Journal Service...
systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
fuse: init (API version 7.39)
systemd[1]: Starting Generate network units from Kernel command line...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Coldplug All udev Devices...
systemd-journald[578]: Collecting audit messages is disabled.
systemd[1]: Starting Virtual Console Setup...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Generate network units from Kernel command line.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Reached target Preparation for Network.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
systemd[1]: Started Journal Service.
systemd-journald[578]: Received client request to flush runtime journal.
wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000
intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000
intel_sst_acpi 808622A8:00: DRAM base: 0x91100000
intel_sst_acpi 808622A8:00: SHIM base: 0x91140000
intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000
intel_sst_acpi 808622A8:00: DDR base: 0x20000000
cfg80211: Loading compiled-in X.509 certificates for regulatory database
intel_sst_acpi 808622A8:00: Got drv data max stream 25
intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
intel_sst_acpi 808622A8:00: Falling back to sysfs fallback for: intel/fw_sst_22a8.bin
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
btmrvl_sdio mmc0:0001:2: Direct firmware load for mrvl/sd8897_uapsta.bin failed with error -2
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
btmrvl_sdio mmc0:0001:2: Falling back to sysfs fallback for: mrvl/sd8897_uapsta.bin
platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
r8169 0000:01:00.0 eth0: RTL8168h/8111h, e4:54:e8:31:05:8c, XID 541, IRQ 117
r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8168: loading out-of-tree module taints kernel.
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input9
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input10
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input11
r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
input: keyd virtual keyboard as /devices/virtual/input/input12
input: keyd virtual pointer as /devices/virtual/input/input13
platform regulatory.0: Direct firmware load for regulatory.db.p7s failed with error -2
platform regulatory.0: Falling back to sysfs fallback for: regulatory.db.p7s
Xorg[2436]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
usb 1-2: USB disconnect, device number 3
Bluetooth: request_firmware(firmware) failed, error code = -110
Bluetooth: Failed to download firmware!
Bluetooth: Downloading firmware failed!
mwifiex_sdio mmc0:0001:1: Direct firmware load for mrvl/sd8897_uapsta.bin failed with error -2
mwifiex_sdio mmc0:0001:1: Falling back to sysfs fallback for: mrvl/sd8897_uapsta.bin
mwifiex_sdio mmc0:0001:1: info: FW download over, size 717068 bytes
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p54)
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.19.p54)
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #4 on: March 28, 2025, 20:31:22 »
Hi Marcus,

das scheint noch nicht im Kernel zu sein,
ich baue das bei mir mal ein, wenn es fertig ist gebe ich bescheid,
und du könntest mal mit meinen Quelle testen.

Gruß,
  Roland
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #5 on: March 28, 2025, 20:39:09 »
Das klingt super, ich danke dir! Oben im ersten Post ist ein Link zur Kernelconfig für den 3040. Denke damit sollte ein Vergleich zur Kernelconfig der MLD möglich sein?
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #6 on: March 28, 2025, 20:56:07 »
Hi Marcus,

ich habe dir eine Link geschickt, wo das Image runter laden kannst.

Mal sehen ob damit die eMMC erkannt wird.

Gruß,
  Roland
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #7 on: March 28, 2025, 20:59:40 »
Krass, das war schnell!  ;D
Ich lad es gerade runter und teste umgehend.

EDIT: Leider nein. Habe die Ausgabe von dmesg gerade mit der alten verglichen. Fast exakt identisch. Bluetooth scheint jetzt die Firmware geladen bekommen zu haben. Das ist vorher gescheitert. Von eMMC keine Spur.

EDIT#2: Ich habe mld-image-netinstall-x86-64.iso heruntergeladen und getestet. War das das richtige ISO?
« Last Edit: March 28, 2025, 21:16:51 by Marcus »
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #8 on: March 28, 2025, 21:16:46 »
Kannst du nochmal ein dmesg machen
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #9 on: March 28, 2025, 21:17:47 »
Code: [Select]
Linux version 6.6.21-yocto-standard (oe-user@oe-host) (x86_64-mld-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240716) #1 SMP PREEMPT_DYNAMIC Tue Mar 19 16:42:51 UTC 2024
Command line: initrd=\initrd LABEL=normal net.ifnames=0
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007a6e9fff] usable
BIOS-e820: [mem 0x000000007a6ea000-0x000000007a719fff] reserved
BIOS-e820: [mem 0x000000007a71a000-0x000000007a746fff] ACPI data
BIOS-e820: [mem 0x000000007a747000-0x000000007a80efff] ACPI NVS
BIOS-e820: [mem 0x000000007a80f000-0x000000007abdbfff] reserved
BIOS-e820: [mem 0x000000007abdc000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
efi: EFI v2.4 by American Megatrends
efi: ACPI=0x7a723000 ACPI 2.0=0x7a723000 SMBIOS=0x7a9f7000 ESRT=0x7a9e7598 SMBIOS 3.0=0x7a9f6000 INITRD=0x7686b598
efi: Remove mem26: MMIO range=[0xfea00000-0xfeafffff] (1MB) from e820 map
e820: remove [mem 0xfea00000-0xfeafffff] reserved
efi: Not removing mem27: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem28: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
efi: Not removing mem29: MMIO range=[0xfed03000-0xfed03fff] (4KB) from e820 map
efi: Not removing mem30: MMIO range=[0xfed06000-0xfed06fff] (4KB) from e820 map
efi: Not removing mem31: MMIO range=[0xfed08000-0xfed09fff] (8KB) from e820 map
efi: Not removing mem32: MMIO range=[0xfed1c000-0xfed1cfff] (4KB) from e820 map
efi: Remove mem33: MMIO range=[0xfed80000-0xfedbffff] (0MB) from e820 map
e820: remove [mem 0xfed80000-0xfedbffff] reserved
efi: Not removing mem34: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem35: MMIO range=[0xffa00000-0xffffffff] (6MB) from e820 map
e820: remove [mem 0xffa00000-0xffffffff] reserved
SMBIOS 3.0.0 present.
DMI: Dell Inc. Wyse 3040 Thin Client/05MW5F, BIOS 1.2.5 08/20/2018
tsc: Detected 1440.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR map: 4 entries (2 fixed + 2 variable; max 18), built from 8 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
esrt: Reserving ESRT space from 0x000000007a9e7598 to 0x000000007a9e75d0.
Secure boot disabled
RAMDISK: [mem 0x752d0000-0x7588efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A723000 000024 (v02 DELL  )
ACPI: XSDT 0x000000007A7230A0 0000C4 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FACP 0x000000007A740728 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
ACPI: DSDT 0x000000007A7231F8 01D52A (v02 DELL   CBX3     01072009 INTL 20120913)
ACPI: FACS 0x000000007A80EF80 000040
ACPI: APIC 0x000000007A740838 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
ACPI: FPDT 0x000000007A7408C0 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FIDT 0x000000007A740908 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: MCFG 0x000000007A7409A8 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
ACPI: SSDT 0x000000007A7409E8 0041C5 (v01 DptfTb DptfTab  00001000 INTL 20120913)
ACPI: SSDT 0x000000007A744BB0 000654 (v01 CpuDpf CpuDptf  00001000 INTL 20120913)
ACPI: SSDT 0x000000007A745208 000058 (v01 LowPM  LowPwrM  00001000 INTL 20120913)
ACPI: UEFI 0x000000007A745260 000042 (v01 DELL   CBX3     00000000      00000000)
ACPI: SSDT 0x000000007A7452A8 000269 (v01 UsbCTb UsbCTab  00001000 INTL 20120913)
ACPI: HPET 0x000000007A745518 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
ACPI: SSDT 0x000000007A745550 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745CB8 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745F48 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
ACPI: LPIT 0x000000007A7460C8 000104 (v01 DELL   CBX3     00000005 MSFT 0100000D)
ACPI: BCFG 0x000000007A7461D0 000139 (v01 INTEL  BATTCONF 00000001 INTL 00000000)
ACPI: PRAM 0x000000007A746310 000030 (v01                 00000001      00000000)
ACPI: BGRT 0x000000007A746340 000038 (v00                 01072009 AMI  00010013)
ACPI: CSRT 0x000000007A746378 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
ACPI: WDAT 0x000000007A7464C8 000104 (v01                 00000000      00000000)
ACPI: Reserving FACP table memory at [mem 0x7a740728-0x7a740833]
ACPI: Reserving DSDT table memory at [mem 0x7a7231f8-0x7a740721]
ACPI: Reserving FACS table memory at [mem 0x7a80ef80-0x7a80efbf]
ACPI: Reserving APIC table memory at [mem 0x7a740838-0x7a7408bb]
ACPI: Reserving FPDT table memory at [mem 0x7a7408c0-0x7a740903]
ACPI: Reserving FIDT table memory at [mem 0x7a740908-0x7a7409a3]
ACPI: Reserving MCFG table memory at [mem 0x7a7409a8-0x7a7409e3]
ACPI: Reserving SSDT table memory at [mem 0x7a7409e8-0x7a744bac]
ACPI: Reserving SSDT table memory at [mem 0x7a744bb0-0x7a745203]
ACPI: Reserving SSDT table memory at [mem 0x7a745208-0x7a74525f]
ACPI: Reserving UEFI table memory at [mem 0x7a745260-0x7a7452a1]
ACPI: Reserving SSDT table memory at [mem 0x7a7452a8-0x7a745510]
ACPI: Reserving HPET table memory at [mem 0x7a745518-0x7a74554f]
ACPI: Reserving SSDT table memory at [mem 0x7a745550-0x7a745cb2]
ACPI: Reserving SSDT table memory at [mem 0x7a745cb8-0x7a745f47]
ACPI: Reserving SSDT table memory at [mem 0x7a745f48-0x7a7460c1]
ACPI: Reserving LPIT table memory at [mem 0x7a7460c8-0x7a7461cb]
ACPI: Reserving BCFG table memory at [mem 0x7a7461d0-0x7a746308]
ACPI: Reserving PRAM table memory at [mem 0x7a746310-0x7a74633f]
ACPI: Reserving BGRT table memory at [mem 0x7a746340-0x7a746377]
ACPI: Reserving CSRT table memory at [mem 0x7a746378-0x7a7464c3]
ACPI: Reserving WDAT table memory at [mem 0x7a7464c8-0x7a7465cb]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007bffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000008efff]
  node   0: [mem 0x0000000000090000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000001effffff]
  node   0: [mem 0x0000000020200000-0x000000007a6e9fff]
  node   0: [mem 0x000000007abdc000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 4608 pages in unavailable ranges
On node 0, zone DMA32: 1266 pages in unavailable ranges
On node 0, zone DMA32: 16384 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[mem 0x7ef00000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s190184 r8192 d31000 u524288
pcpu-alloc: s190184 r8192 d31000 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Kernel command line: initrd=\initrd LABEL=normal net.ifnames=0
Unknown kernel command line parameters "LABEL=normal", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 493838
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 1843952K/2007720K available (20480K kernel code, 2628K rwdata, 5652K rodata, 3572K init, 1808K bss, 163512K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 55939 entries in 219 pages
ftrace: allocated 219 pages with 6 groups
Dynamic Preempt: full
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
        Trampoline variant of Tasks RCU enabled.
        Rude variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=1440000)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 56K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,integrity
landlock: Up and running.
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350  CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
signal: max sigframe size: 1440
Estimated ratio of average max frequency by base frequency (times 1024): 1365
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 400.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (11520.00 BogoMIPS)
devtmpfs: initialized
ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x7a747000-0x7a80efff] (819200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
raid6: sse2x4   gen()  3540 MB/s
raid6: sse2x2   gen()  3464 MB/s
raid6: sse2x1   gen()  2638 MB/s
raid6: using algorithm sse2x4 gen() 3540 MB/s
raid6: .... xor() 1007 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001AD9800 00059C (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001B29000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001AAD600 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001950F00 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
ACPI: _OSC evaluated successfully for all CPUs
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: \_SB_.P12T: New power resource
ACPI: \_SB_.P12A: New power resource
ACPI: \_SB_.PCI0.ISP3.ID3C: New power resource
ACPI: \_SB_.USBC: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSCW.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC3.WWPR: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK3: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK4: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK2: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK1: New power resource
ACPI: \_SB_.P28X: New power resource
ACPI: \_SB_.P18X: New power resource
ACPI: \_SB_.P12X: New power resource
ACPI: \_SB_.P28P: New power resource
ACPI: \_SB_.P18P: New power resource
ACPI: \_SB_.P19X: New power resource
ACPI: \_SB_.P06X: New power resource
ACPI: \_SB_.P28T: New power resource
ACPI: \_SB_.P18D: New power resource
ACPI: \_SB_.P18T: New power resource
ACPI: \_SB_.P3P3: New power resource
ACPI: \_SB_.P28W: New power resource
ACPI: \_SB_.P18W: New power resource
ACPI: \_SB_.P12W: New power resource
ACPI: \_SB_.P33W: New power resource
ACPI: \_SB_.P33X: New power resource
ACPI: \_SB_.P4BW: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x9152c000-0x9152cfff 64bit]
pci 0000:00:11.0: [8086:2295] type 00 class 0x080501
pci 0000:00:11.0: reg 0x10: [mem 0x91529000-0x91529fff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0x91404000-0x91404fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x91400000-0x91403fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: on NUMA node 0
Low-power S0 idle used by default for system suspend
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKA disabled
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: \_SB_.PCI0.I2C4.CLK0: New power resource
ACPI: \_SB_.PCI0.I2C4.CLK1: New power resource
iommu: Default domain type: Translated
Hardware (show / hide)

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #10 on: March 28, 2025, 21:18:55 »
Code: [Select]
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
efivars: Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x7a6ea000-0x7bffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x0400-0x047f] has been reserved
system 00:00: [io  0x0500-0x05fe] has been reserved
system 00:02: [mem 0x9152a000-0x9152afff] has been reserved
system 00:02: [mem 0x9151c000-0x9151cfff] has been reserved
system 00:02: [mem 0x9151a000-0x9151afff] has been reserved
system 00:02: [mem 0x91518000-0x91518fff] has been reserved
system 00:02: [mem 0x91527000-0x91527fff] has been reserved
system 00:02: [mem 0x91525000-0x91525fff] has been reserved
system 00:02: [mem 0x91523000-0x91523fff] has been reserved
system 00:02: [mem 0x91521000-0x91521fff] has been reserved
system 00:02: [mem 0x9151f000-0x9151ffff] has been reserved
system 00:02: [mem 0x9151d000-0x9151dfff] has been reserved
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: resource 9 [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: resource 10 [mem 0x7cf00001-0x7ef00000 window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
clocksource: Switched to clocksource tsc
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Key type cifs.idmap registered
SGI XFS with security attributes, no debug enabled
xor: measuring software checksum speed
   prefetch64-sse  :  5878 MB/sec
   generic_sse     :  5204 MB/sec
xor: using function: prefetch64-sse (5878 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 115
ACPI: AC: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ00] (0 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
brd: module loaded
loop: module loaded
e100: Intel(R) PRO/100 Network Driver
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2025-03-28T20:02:52 UTC (1743192172)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-pci 0000:00:11.0: SDHCI controller found [8086:2295] (rev 36)
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
u32 classifier
    input device check on
    Actions configured
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
NET: Registered PF_VSOCK protocol family
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (845003028, 3120838)->(912310550, -64186684)
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=no, fsverity=no
mmc0: new ultra high speed SDR104 SDIO card at address 0001
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usb 1-2: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:20A0:0006.0001: hiddev96,hidraw0: USB HID v1.11 Device [flirc.tv flirc] on usb-0000:00:14.0-2/input0
input: flirc.tv flirc Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:20A0:0006.0002/input/input2
hid-generic 0003:20A0:0006.0002: input,hidraw1: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-0000:00:14.0-2/input1
hid-generic 0003:20A0:0006.0003: hiddev97,hidraw2: USB HID v1.11 Device [flirc.tv flirc] on usb-0000:00:14.0-2/input2
Freeing initrd memory: 5884K
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
clk: Disabling unused clocks
ALSA device list:
  No soundcards found.
Freeing unused kernel image (initmem) memory: 3572K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (rodata/data gap) memory: 492K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    LABEL=normal
scsi 0:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
/dev/sda1: Can't open blockdev
ext3: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext2: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext4: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
squashfs: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
xfs: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext3: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext2: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
ext4: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
squashfs: Unknown parameter 'umask'
/dev/sda1: Can't open blockdev
xfs: Unknown parameter 'umask'
loop0: detected capacity change from 0 to 419840
loop1: detected capacity change from 0 to 419840
systemd[1]: systemd 255.4^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <MLD>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Starting Journal Service...
systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
fuse: init (API version 7.39)
systemd[1]: Starting Generate network units from Kernel command line...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd-journald[581]: Collecting audit messages is disabled.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Virtual Console Setup...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Started Journal Service.
systemd-journald[581]: Received client request to flush runtime journal.
wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000
intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000
intel_sst_acpi 808622A8:00: DRAM base: 0x91100000
intel_sst_acpi 808622A8:00: SHIM base: 0x91140000
intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000
intel_sst_acpi 808622A8:00: DDR base: 0x20000000
intel_sst_acpi 808622A8:00: Got drv data max stream 25
intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
intel_sst_acpi 808622A8:00: Falling back to sysfs fallback for: intel/fw_sst_22a8.bin
Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
mwifiex_sdio mmc0:0001:1: Direct firmware load for mrvl/sd8897_uapsta.bin failed with error -2
mwifiex_sdio mmc0:0001:1: Falling back to sysfs fallback for: mrvl/sd8897_uapsta.bin
r8169 0000:01:00.0 eth0: RTL8168h/8111h, e4:54:e8:31:05:8c, XID 541, IRQ 117
r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8168: loading out-of-tree module taints kernel.
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input4
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input5
input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input6
r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
input: keyd virtual keyboard as /devices/virtual/input/input7
input: keyd virtual pointer as /devices/virtual/input/input8
platform regulatory.0: Direct firmware load for regulatory.db.p7s failed with error -2
platform regulatory.0: Falling back to sysfs fallback for: regulatory.db.p7s
Xorg[2392]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
Bluetooth: FW download over, size 717068 bytes
btmrvl_sdio mmc0:0001:2: sdio device tree data not available
mwifiex_sdio mmc0:0001:1: WLAN is not the winner! Skip FW dnld
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p54)
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.19.p54)
usb 1-2: USB disconnect, device number 3
usb 1-2: new full-speed USB device number 4 using xhci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0004/input/input9
hid-generic 0003:046D:C534.0004: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input10
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input11
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input12
hid-generic 0003:046D:C534.0005: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
usb 1-2: USB disconnect, device number 4
usb 1-2: new full-speed USB device number 5 using xhci_hcd
hid-generic 0003:20A0:0006.0006: hiddev96,hidraw0: USB HID v1.11 Device [flirc.tv flirc] on usb-0000:00:14.0-2/input0
input: flirc.tv flirc Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:20A0:0006.0007/input/input15
hid-generic 0003:20A0:0006.0007: input,hidraw1: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-0000:00:14.0-2/input1
hid-generic 0003:20A0:0006.0008: hiddev97,hidraw2: USB HID v1.11 Device [flirc.tv flirc] on usb-0000:00:14.0-2/input2
warning: `lshw' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

EDIT: Nicht dass ich das falsche Image erwischt habe. Die Version mit "qemu" am Ende ist von der Uhrzeit her neuer.
« Last Edit: March 28, 2025, 21:23:47 by Marcus »
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #11 on: March 28, 2025, 21:29:45 »
nein nicht das qemu sondern das iso.

qemu ist für virtuelle Maschinen
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #12 on: March 28, 2025, 21:30:16 »
Okay, dann war es das richtige.
Hardware (show / hide)

Offline rfehr

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1552
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #13 on: March 28, 2025, 21:42:15 »
Kannst du mal ein Support Log erstellen
1x OctopusNet 4x DVB-C
1x Zotac ITX-A Atom 330
1x RPI2 als Client
1x BananaPi
1x Wetekplay
1x MCC 100
2x RPI3
2x RPi4
1x https://www.zotac.com/at/product/mini_pcs/pi335

Online Marcus

  • Profi Member
  • ****
  • Posts: 452
    • View Profile
MLD 6.5 x86 Installation auf eMMC
« Reply #14 on: March 28, 2025, 21:47:57 »
Support Log id ist: RGlHsl
Hardware (show / hide)

[1] 2 3 4 >>> MLD-6.x / General / MLD 6.5 x86 Installation auf eMMC
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.