[kalli]

Hallo,

Folgender Testbericht zur MLD-1.9.0_default-259_38.iso
DVB-S Karte:  Hauppauge WinTV-NOVA-SE2

Nach der sonst erfolgreichen Installation erhalte ich folgendes
nach dem boot:


/var/log/messages
==============
Nov 21 13:18:01 (none) user.warn kernel: saa7146: register extension 'budget_ci
Nov 21 13:18:01 (none) user.warn kernel: saa7146: register extension 'budget_pat
Nov 21 13:18:01 (none) user.info kernel: bttv: driver version 0.9.17 loaded
Nov 21 13:18:01 (none) user.info kernel: bttv: using 8 buffers with 2080k (520 p
Nov 21 13:18:02 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: Hauppauge model 92500,
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: MAC address is 00-0D-F
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: tuner model is Conexan
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: TV standards ATSC/DVB
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: audio processor is CX8
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: decoder processor is C
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: has no radio, has no I
Nov 21 13:18:02 (none) user.warn kernel: cx88[0]: warning: unknown hauppauge mod
Nov 21 13:18:02 (none) user.info kernel: cx88[0]: hauppauge eeprom: model=92500
Nov 21 13:18:02 (none) user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Nov 21 13:18:02 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.
Nov 21 13:18:02 (none) user.info kernel: cx88/2: registering cx8802 driver, type
Nov 21 13:18:02 (none) user.info kernel: cx88[0]/2: subsystem: 0070:9200, board:
Nov 21 13:18:02 (none) user.warn kernel: cx24123_readreg: reg=0x0 (error=-121)
Nov 21 13:18:02 (none) user.warn kernel: Version != d1 or e1
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: frontend initialization faile
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: dvb_register failed (err = -1
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: cx8802 probe failed, err = -1


lsmod
====
Module                  Size  Used by    Not tainted
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
videobuf_dvb            5380  0
dvb_bt8xx              12548  0
bt878                   8552  1 dvb_bt8xx
bttv                  143572  2 dvb_bt8xx,bt878
compat_ioctl32          1664  1 bttv
i2c_algo_bit            5124  3 cx88_vp3054_i2c,cx88xx,bttv
btcx_risc               3720  3 cx8802,cx88xx,bttv
tveeprom               13072  2 cx88xx,bttv
b2c2_flexcop_pci        6168  0
b2c2_flexcop           17164  1 b2c2_flexcop_pci
budget_patch            7936  0
budget_av              14720  0
budget_ci              14724  0
ir_common              24708  3 cx88xx,bttv,budget_ci
budget                  9604  0
budget_core             7684  4 budget_patch,budget_av,budget_ci,budget
dvb_ttpci              78024  0
dvb_core               53404  9 videobuf_dvb,dvb_bt8xx,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci
firmware_class          7168  6 dvb_bt8xx,bttv,b2c2_flexcop,budget_av,budget_ci,dvb_ttpci
saa7146_vv             37504  2 budget_av,dvb_ttpci
saa7146                13320  7 budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
videobuf_dma_sg         8580  5 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv
videobuf_core          11012  6 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv,videobuf_dma_sg
videodev               23552  3 cx88xx,bttv,saa7146_vv
v4l2_common            12416  4 cx88xx,bttv,saa7146_vv,videodev
v4l1_compat            12292  3 bttv,saa7146_vv,videodev
ttpci_eeprom            2688  2 budget_core,dvb_ttpci
i2c_core               14336  16 cx24123,cx88_vp3054_i2c,cx88xx,dvb_bt8xx,bttv,i2c_algo_bit,tveeprom,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,v4l2_common,ttpci_eeprom




dmesg
=====
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_patch dvb'.
b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92500, rev B1B1, serial# 567043
tveeprom 0-0050: MAC address is 00-0D-FE-08-A7-03
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input2
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0c.2 to 64
cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]
cx88[0]/2: cx2388x based DVB/ATSC card
cx24123_readreg: reg=0x0 (error=-121)
Version != d1 or e1
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -1)
cx88[0]/2: cx8802 probe failed, err = -1


Gruß
Kalli
 

[kalli]

2. Versuch
==========
Nun probiere ich weiter:

1. /etc/init.d/dvb stop


Ergebnis:

/var/log/messages
=============
Nov 21 13:46:38 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Nov 21 13:46:38 (none) user.warn kernel: saa7146: unregister extension 'budget_av'.
Nov 21 13:46:39 (none) user.warn kernel: saa7146: unregister extension 'budget dvb'.

lsmod
=====
Module                  Size  Used by    Not tainted
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
i2c_core               14336  1 cx24123

dmesg
=====
b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_patch dvb'.
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.

=========================================

2. modpobe cx88-dvb

Ergebnis:

Ausgabe
======
insmod: cannot insert '/lib/modules/2.6.22.6/kernel/drivers/media/video/cx88/cx88-dvb.ko': No such device (-1): No such device
modprobe: failed to load module cx88_dvb



/var/log/messages
=============
Nov 21 13:51:37 (none) user.info kernel: Linux video capture interface: v2.00
Nov 21 13:51:37 (none) user.info kernel: cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
Nov 21 13:51:37 (none) user.info kernel: cx88[0]: TV tuner type 4, Radio tuner type -1
Nov 21 13:51:37 (none) user.info kernel: input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input3
Nov 21 13:51:37 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 21 13:51:37 (none) user.info kernel: cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
Nov 21 13:51:37 (none) user.info kernel: cx88[0]/2: cx2388x based DVB/ATSC card


lsmod
=====
Module                  Size  Used by    Not tainted
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
ir_common              24708  1 cx88xx
i2c_algo_bit            5124  2 cx88_vp3054_i2c,cx88xx
tveeprom               13072  1 cx88xx
videodev               23552  1 cx88xx
v4l2_common            12416  2 cx88xx,videodev
v4l1_compat            12292  1 videodev
btcx_risc               3720  2 cx8802,cx88xx
videobuf_dvb            5380  0
dvb_core               53404  1 videobuf_dvb
videobuf_dma_sg         8580  3 cx8802,cx88xx,videobuf_dvb
videobuf_core          11012  4 cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
i2c_core               14336  6 cx88_vp3054_i2c,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,cx24123



dmesg
=====
Linux video capture interface: v2.00
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92500, rev B1B1, serial# 567043
tveeprom 0-0050: MAC address is 00-0D-FE-08-A7-03
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input3
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]
cx88[0]/2: cx2388x based DVB/ATSC card
cx24123_readreg: reg=0x0 (error=-121)
Version != d1 or e1
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -1)
cx88[0]/2: cx8802 probe failed, err = -1



Der 2. Versuch kommt dem Ziel schon näher. Reicht aber noch nicht.
So sollte es aussehen: http://www.linuxtv.org/wiki/index.php/Haup..._WinTV-NOVA-SE2


Gruß
Kalli


 

[kalli]

Hi,

ich habe mir die Karte mal genauer angeschaut.
Der auf dem Frontend Chip steht CX24123-112.

Von daher wird der richtige Treiber aufgerufen.

Gruß
Kalli

[clausmuus]

villeicht wird die Karte ja falsch erkannt. In dem Fall müsstest Du beim laden des Modules mit angeben um welche Karte es sich handelt, z.B.:
modprobe cx88-dvb card=38

Welche nummer hinter card= stehen muss weiß ich aber nicht. Es könnte sein, das die Karte in dem System wo sie läuft als ne andere erkannt wurde, oder nen älterer Treiber hat, der noch keine Probleme mit der Erkennung hatte, oder es liegt wirklich am smt Patch, da der ja auch diesen Treiber verändert, allerdings die card 58 hinzufügt.

Claus