1 [2] 3 >>> Archiv / MLD 2.x / Bugs & Test Berichte / Softdevice Mit Nvidia Karte
 

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #15 on: October 02, 2008, 16:07:43 »
Easy question - easy answer..
Seg fault usually means your grafic card is not supported by vidix - sorry
Get an ATI9250 AGP

Ciao
Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline sartana

  • Newbie
  • *
  • Posts: 23
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #16 on: October 02, 2008, 17:24:19 »
Hi Matthias

Thanks for the reply i've tried now one ATI 9250 128mb and ATI 9600 128 mb with the same result
'segmentation fault'...I wanted to ask you for view with client without ffcard what it is the simply solution?
I've different video card(ati9250;ati9600;nvidiaGeforce4;Mmillenium2)but the only solution for me now
is fb with a lot of cpu use.There is a mode for combinate one of these video cards for increase a speed with softdevice?

Thanks
Sartana
Logged
Pc server intel celeron 567mhz , 256 MB ram xp sp2
1x 300 GB 1x 500 GB maxtor 7200 rpm for Samba client
cardserver for MLD 0.6.0-10
Internal Lan:
1- MLD 0.6.0.10  on Abit vp6 intel PIII 1100 mhz
    1x300GB  maxtor 7200 rpm 1GB sdram
    Dual card FF nexus 2.3 - HVR hauppauge 1100
2-MLD0.6.0.10 on Amd 450 mhz 256 MB sdram
   1x8 GB western digital-1 FF nexus 2.3
3-Testing...Mld 1.9.0 on QDI board AMD 900 mhz
   1x300GB maxtor 7200 rpm 512 MB sdram
   FF nexus 2.3 - Wintv-nova-s

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #17 on: October 02, 2008, 17:33:31 »
Quote
Hi Matthias

Thanks for the reply i've tried now one ATI 9250 128mb and ATI 9600 128 mb with the same result
'segmentation fault'...I wanted to ask you for view with client without ffcard what it is the simply solution?
I've different video card(ati9250;ati9600;nvidiaGeforce4;Mmillenium2)but the only solution for me now
is fb with a lot of cpu use.There is a mode for combinate one of these video cards for increase a speed with softdevice?

Thanks
Sartana
Once I had this seg fault with a Matrox G550 and after some time I found out that it seems to be a problem with mainboard and VGA card (or maybe memory...?). So I´ve tried another board and everything was fine (with Vidix).
Do you have the chance to use a different mainboard?
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline sartana

  • Newbie
  • *
  • Posts: 23
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #18 on: October 02, 2008, 17:43:06 »
Yes i've used 3-4 mainboard (micro atx )with integrated vga and each with these video card but for me the only mode for not VDR exits is FrameBuffer .I wanted to ask you DFB is only for matrox card?
Does thing recommend me to do?

Ciao matthias

Sartana
Logged
Pc server intel celeron 567mhz , 256 MB ram xp sp2
1x 300 GB 1x 500 GB maxtor 7200 rpm for Samba client
cardserver for MLD 0.6.0-10
Internal Lan:
1- MLD 0.6.0.10  on Abit vp6 intel PIII 1100 mhz
    1x300GB  maxtor 7200 rpm 1GB sdram
    Dual card FF nexus 2.3 - HVR hauppauge 1100
2-MLD0.6.0.10 on Amd 450 mhz 256 MB sdram
   1x8 GB western digital-1 FF nexus 2.3
3-Testing...Mld 1.9.0 on QDI board AMD 900 mhz
   1x300GB maxtor 7200 rpm 512 MB sdram
   FF nexus 2.3 - Wintv-nova-s

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #19 on: October 02, 2008, 18:01:16 »
Quote
Yes i've used 3-4 mainboard (micro atx )with integrated vga and each with these video card but for me the only mode for not VDR exits is FrameBuffer .I wanted to ask you DFB is only for matrox card?
Does thing recommend me to do?

Ciao matthias

Sartana
With the beta MLD DFB is not ready yet. DFB will take some more time.
With the 0.6.0 DFB only works with the Matrox card.

I know I had this seg fault issue in the past, but after some tries, inkl. new installation the issue didn´t apear again.
So it´s hard for me to say what exactly was the problem. But I as far as I remember i had the issue when using a Matriox card with a mainboard with On Board VGA.

With the beta MLD I´ve tested 3 different mainboards (incl. Onboard VGA) and 4 different VGA cards with the Vidix Addon without one issue.

After all a Segmentation Fault is similiar to the Windows Blue Screen. Which can be a software or a hardware issue, e.g. memory problem.

So the only thing I can advise is trying different hardware and memory combinations - sorry...

Matthias


 
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline Marcus

  • Profi Member
  • ****
  • Posts: 425
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #20 on: October 02, 2008, 18:09:53 »
Do you use MLD 0.6.0 or 1.9.0?
With 0.6.0 I had same Problem!

@All:
Ich habs grad nochmal durchgespielt, 6800gt mit vidix unter 1.9.0! Meine Logfiles sehen genauso aus wie die von Sebastian. Alles wunderbar, aber alle Videosettings stehen auf 0. Daher kein Bild mit vidix...  :wand  
« Last Edit: October 02, 2008, 18:12:35 by Marcus »
Logged
Hardware (show / hide)

Offline sartana

  • Newbie
  • *
  • Posts: 23
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #21 on: October 02, 2008, 18:32:37 »
Hi Marcus i've this problem with mld 6.0.10 ,I have not tried with mld 1.9.0 I have immediately abdicated because is to too much slow for my hardware respect 6.0.10 ,the scroll of menu is much slow and i can't work on(i don't know becuse there is this difference between the two versions in softdevice use ... (probally there is a problem with my hardware)

Hi and goodwork to everybody
Logged
Pc server intel celeron 567mhz , 256 MB ram xp sp2
1x 300 GB 1x 500 GB maxtor 7200 rpm for Samba client
cardserver for MLD 0.6.0-10
Internal Lan:
1- MLD 0.6.0.10  on Abit vp6 intel PIII 1100 mhz
    1x300GB  maxtor 7200 rpm 1GB sdram
    Dual card FF nexus 2.3 - HVR hauppauge 1100
2-MLD0.6.0.10 on Amd 450 mhz 256 MB sdram
   1x8 GB western digital-1 FF nexus 2.3
3-Testing...Mld 1.9.0 on QDI board AMD 900 mhz
   1x300GB maxtor 7200 rpm 512 MB sdram
   FF nexus 2.3 - Wintv-nova-s

Offline Marcus

  • Profi Member
  • ****
  • Posts: 425
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #22 on: October 02, 2008, 19:01:08 »
No, it´s not a Problem with your Hardware.

But with MLD 0.6.0 Vidix is not working with Nvidia.
With MLD 1.9.0 it should work, but some users (mee to) had some Problems with Nvidia in 1.9.0 too. I hope this will be fixed soon.

@Claus, Matthias:
Quote
aber alle Videosettings stehen auf 0. Daher kein Bild mit vidix...

Um das nochmal zu verdeutlichen, im OSD stehen die Werte auf 50, wurde auch korrekt gespeichert. Aber im Logfile steht dort überall 0...
« Last Edit: October 02, 2008, 19:03:32 by Marcus »
Logged
Hardware (show / hide)

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #23 on: October 02, 2008, 19:41:30 »
@ bastir und markus.

Habe eben noch mal mein Logs geprüft (ATI9250 + Vidix).

Bei mir habe ich auch diese kuriose Ausgabe:

19:33:39.0176 I [6007] [cVidixVideoOut]  brightness (0)
19:33:39.0176 I [6007] [cVidixVideoOut]  contrast (0)
19:33:39.0176 I [6007] [cVidixVideoOut]  saturation (0)
19:33:39.0176 I [6007] [cVidixVideoOut]  hue (0)

Weiter oben in der sysinit steht es dann aber richtig:
[setup-softdevice] vidBrightness: 50
[setup-softdevice] vidContrast: 50
[setup-softdevice] vidHue: 50
[setup-softdevice] vidSaturation: 65
[setup-softdevice] startup aspect set to (4:3 Normalbild)
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20422
    • View Profile
    • ClausMuus.de
Softdevice Mit Nvidia Karte
« Reply #24 on: October 02, 2008, 19:51:50 »
Hi,

first, I think the segmentation fault comes because the versions of some Addons are not compatible. Also it can be a hardware problem. The mld-0.6 only works with a Matrox card, and only with vidix, not with dfb.
On my (slow) system the MLD-1.9 runs faster than the MLD-0.6. Vidix works on some different cards and dfb is in work and runs good on a i810 card (smt-7020s).

Wegen der Videosettings werde ich mal schauen ob ich da was heraus finde.
Ich meine das ich vidix bereits erfolgreich auf meiner nVidia GeForce 7300 SE getestet hatte.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20422
    • View Profile
    • ClausMuus.de
Softdevice Mit Nvidia Karte
« Reply #25 on: October 02, 2008, 19:53:47 »
Hat eigentlich schon mal einer von Euch im VDR-Portal geschaut ob dazu was zu finden ist (zu den Video Settings)?
« Last Edit: October 02, 2008, 21:18:36 by clausmuus »
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #26 on: October 02, 2008, 21:03:11 »
Quote
Hat eigentlich schon mal einer von Euch im VDR-Portal geschaut ob dazu was zu finden ist?
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline bastir

  • Newbie
  • *
  • Posts: 7
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #27 on: October 03, 2008, 12:21:47 »
Habe im vdr-portal viele Leute mit Problemen bei vidix (auch kein Bild nur OSD) bei nvidia Karten gefunden.

Jemand hat es bei einer matrox mit fb geschaft. Vielleicht hilft der nvidiafb, aber große Hoffnung habe ich da nicht mehr. Gibt es irgendwo eine Liste mit von vidix unterstüzten Karten?

Quote
- /boot/grub/menu.lst
vga=.... bzw. video=... -- komplett gelöscht (1)

- /etc/vdr/plugins/softdevice/plugin.conf
PARA="-vo vidix: ....... -- geändert (2)

- /etc/modules
matroxfb_base -- eingefügt (3)

- /etc/vdr/run.d/
init_framebuffer -- scrpt erstellt (3)

- /etc/vdr/run.d/init.framebuffer
/usr/sbin/fbset -fb /dev/fb0 1152x864-75-32 -- eingefügt (4)

Es ist sicherlich für eine Distribution, die komplett im RAM läuft kein sehr guter Vorschlag, aber mit X +nvidia_binary, libxineout und xvmc lief es bei meinem alten System super. Einzig das Booten des Debians hat etwas gedauert.

 
Logged

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #28 on: October 03, 2008, 13:16:23 »
Quote
Hi,

first, I think the segmentation fault comes because the versions of some Addons are not compatible.

 
@sartana
Have you tried to run the MLD with a minimum of addons?
Just include Vidix, delete the rest and try it again.

Ciao
Matteo :-)
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline Marcus

  • Profi Member
  • ****
  • Posts: 425
    • View Profile
Softdevice Mit Nvidia Karte
« Reply #29 on: October 03, 2008, 18:41:23 »
Was mich bloß wundert, ohne vidix, also sofdevice pur, habe ich auf einem XP3200+ mit der 6800GT eine Auslastung von ~100%!
Kommt jetzt vidix mit ins Spiel, sind es "bloß" noch ~70-80%, aber kein Video auf dem Monitor. Irgendwie ziemlich irreführend. Wenn ich sehe, das andere mit vidix nur ~20-30% Auslastung bei 800 oder 1000MHz haben, dafür aber sogar mit Bild. *NEID*

BTW: Welche Version von Vidix benutzen wir? Denke die letzte, also 1.0.0!? Darin sollten so ziemlich alle Nvidia´s unterstützt werden, auch 6200, 6800 usw.. Also liegts vermutlich nur an der Konfig. Und nvidiafb bräuchte man doch nur, wenn man andere als die standard Auflösung möchte?
« Last Edit: October 03, 2008, 20:26:43 by Marcus »
Logged
Hardware (show / hide)

1 [2] 3 >>> Archiv / MLD 2.x / Bugs & Test Berichte / Softdevice Mit Nvidia Karte
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.