[1] Archiv / MLD 2.x / General / Wird Diese Karte Unter Mld2 Unterstützt?
 

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« on: June 07, 2009, 09:36:57 »
Kann mir jemand sagen ob diese Karte von MLD unterstütz wird, und wenn ja wie sie eingerichtet werden muß ?!



Die technischen Daten:
Creatix TV-Tuner 7134 Phillips
CTX918_V.2 DVB-T/TV

Zu erhalten bei ebay
hier

Der Analog und DVB-T Teil der Karte funktioniert unter Windows problemlos.

Gruß Marcus
« Last Edit: June 07, 2009, 09:52:59 by boomer »
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #1 on: June 07, 2009, 10:06:05 »
Quote
Kann mir jemand sagen ob diese Karte von MLD unterstütz wird, und wenn ja wie sie eingerichtet werden muß ?!



Die technischen Daten:
Creatix TV-Tuner 7134 Phillips
CTX918_V.2 DVB-T/TV

Zu erhalten bei ebay
hier

Der Analog und DVB-T Teil der Karte funktioniert unter Windows problemlos.

Gruß Marcus
Hi,

schau mal hier: Linux TV Wiki

Schaut gut aus.
Ansonsten musst Du erstmal nix einstellen.

Matthias

PS
Berichte mal wie die Karte sich so macht
« Last Edit: June 07, 2009, 10:13:13 by Matthias »
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #2 on: June 07, 2009, 15:06:01 »
Habe jetzt mal getestet auf einem Asus Pundit-R

und wie mein 3 jahre alter sohn sagt, gehte nit.

Karte wird nicht erkannt, und setzt im rc.config den Treiber auf all

lsmod sagt:


MLD> lsmod
Module                  Size  Used by    Not tainted
cx88_vp3054_i2c         3840  0
cx8802                 18180  0
cx88xx                 72744  1 cx8802
s5h1409                 9348  0
s5h1411                 9988  0
or51132                 8964  0
cx24116                15240  0
videobuf_dvb            9732  2 cx8802,cx88xx
stb6000                 4868  0
stv0288                 8328  0
cx22702                 6660  0
dvb_bt8xx              16132  0
nxt6000                 7684  1 dvb_bt8xx
sp887x                  7684  1 dvb_bt8xx
dst_ca                 13184  1 dvb_bt8xx
dst                    26120  2 dvb_bt8xx,dst_ca
bt878                  11368  2 dvb_bt8xx,dst
bttv                  194324  2 dvb_bt8xx,bt878
v4l2_compat_ioctl32     2176  1 bttv
v4l2_common            18816  1 bttv
btcx_risc               5512  3 cx8802,cx88xx,bttv
tveeprom               12292  2 cx88xx,bttv
or51211                 8452  1 dvb_bt8xx
zl10353                 8200  1 dvb_bt8xx
cx24110                 8324  1 dvb_bt8xx
b2c2_flexcop_pci        8984  0
b2c2_flexcop           26764  1 b2c2_flexcop_pci
mt352                   6916  2 dvb_bt8xx,b2c2_flexcop
itd1000                 6660  1 b2c2_flexcop
bcm3510                 9860  1 b2c2_flexcop
nxt200x                13060  1 b2c2_flexcop
isl6421                 3072  1 b2c2_flexcop
tuner_simple           13968  2 dvb_bt8xx,b2c2_flexcop
tuner_types            15232  1 tuner_simple
cx24113                 8580  1 b2c2_flexcop
mt312                   8708  1 b2c2_flexcop
cx24123                13960  1 b2c2_flexcop
lgdt330x                8964  2 dvb_bt8xx,b2c2_flexcop
budget_patch           10240  0
budget_av              24704  0
tua6100                 4096  1 budget_av
dvb_pll                 9992  2 b2c2_flexcop,budget_av
tda10021                6916  1 budget_av
tda8261                 4736  1 budget_av
budget_ci              24324  0
ir_common              46724  3 cx88xx,bttv,budget_ci
stb6100                 7812  1 budget_ci
tda10023                7556  2 budget_av,budget_ci
stb0899                30596  2 budget_av,budget_ci
tda827x                10628  1 budget_ci
budget                 14852  0
s5h1420                11908  2 b2c2_flexcop,budget
tda826x                 4484  1 budget
budget_core            11524  4 budget_patch,budget_av,budget_ci,budget
tda10086                9860  1 budget
tda1004x               14980  3 budget_av,budget_ci,budget
dvb_ttpci              89680  0
lnbp21                  3072  3 budget_ci,budget,dvb_ttpci
l64781                  7556  2 budget,dvb_ttpci
saa7146_vv             43520  2 budget_av,dvb_ttpci
saa7146                18696  7 budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
videobuf_dma_sg        13444  4 cx8802,cx88xx,bttv,saa7146_vv
videobuf_core          18308  6 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv,videobuf_dma_sg
videodev               36608  4 cx88xx,bttv,v4l2_common,saa7146_vv
v4l1_compat            13188  2 saa7146_vv,videodev
ves1820                 7044  2 budget,dvb_ttpci
tda8083                 6532  3 budget_patch,budget,dvb_ttpci
sp8870                  7436  1 dvb_ttpci
stv0297                 7936  3 b2c2_flexcop,budget_ci,dvb_ttpci
ves1x93                 7044  3 budget_patch,budget,dvb_ttpci
ttpci_eeprom            3328  2 budget_core,dvb_ttpci
stv0299                10504  6 b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,dvb_ttpci
dvb_core               81408  15 or51132,videobuf_dvb,dvb_bt8xx,dst_ca,dst,or51211,b2c2_flexcop,lgdt330x,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,stv0299
cdfs                   26920  0
thermal                19996  0
processor              40268  1 thermal
fan                     6532  0
button                  9104  0
smbfs                  58624  0
it87                   21008  0
hwmon_vid               3712  1 it87
hwmon                   4124  1 it87
i2c_piix4               9484  0
i2c_dev                 8072  0
sisfb                 204372  0
rivafb                 48004  0
nvidiafb               43904  0
savagefb               27520  0
vgastate                9088  3 rivafb,nvidiafb,savagefb
radeonfb               97344  0
fb_ddc                  3456  3 rivafb,savagefb,radeonfb
matroxfb_base          28640  0
matroxfb_DAC1064       11392  1 matroxfb_base
matroxfb_accel          5248  1 matroxfb_base
matroxfb_Ti3026         6656  1 matroxfb_base
matroxfb_g450           7552  1 matroxfb_base
g450_pll                6784  2 matroxfb_DAC1064,matroxfb_g450
matroxfb_misc          12644  6 matroxfb_base,matroxfb_DAC1064,matroxfb_accel,matroxfb_Ti3026,matroxfb_g450,g450_pll
intelfb                35108  0
atyfb                  36520  0
lirc_serial            14740  0
lirc_dev               14404  1 lirc_serial
3c59x                  40104  0
snd_atiixp             19340  0
snd_ac97_codec         90784  1 snd_atiixp
ac97_bus                2816  1 snd_ac97_codec
snd_seq_oss            29440  0
snd_seq_midi_event      7808  1 snd_seq_oss
snd_seq                46576  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          8460  2 snd_seq_oss,snd_seq
snd_pcm_oss            36384  0
snd_pcm                63108  3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer              21896  2 snd_seq,snd_pcm
snd_page_alloc         10888  2 snd_atiixp,snd_pcm
snd_mixer_oss          15744  1 snd_pcm_oss
snd                    49572  9 snd_atiixp,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
parport_pc             26660  0
parport                34668  1 parport_pc


 
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #3 on: June 07, 2009, 15:07:28 »
noch den messages
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #4 on: June 07, 2009, 15:12:41 »
Jun  7 16:47:33 (none) syslog.info syslogd started: BusyBox v1.9.2
Jun  7 16:47:33 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-03-18 03:15:33 CET)
Jun  7 16:47:33 (none) user.info kernel: hda: UDMA/33 mode selected
Jun  7 16:47:33 (none) user.info kernel: hdc: UDMA/100 mode selected
Jun  7 16:47:34 (none) user.info kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Jun  7 16:48:34 (none) user.info kernel: ide-cd: cmd 0x28 timed out
Jun  7 16:48:34 (none) user.warn kernel: hda: DMA timeout retry
Jun  7 16:48:34 (none) user.err kernel: hda: timeout waiting for DMA
Jun  7 16:48:34 (none) user.warn kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jun  7 16:48:34 (none) user.warn kernel: ide: failed opcode was: unknown
Jun  7 16:48:34 (none) user.err kernel: hda: drive not ready for command
Jun  7 16:49:34 (none) user.info kernel: ide-cd: cmd 0x28 timed out
Jun  7 16:49:34 (none) user.warn kernel: hda: DMA timeout retry
Jun  7 16:49:34 (none) user.err kernel: hda: timeout waiting for DMA
Jun  7 16:49:34 (none) user.warn kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jun  7 16:49:34 (none) user.warn kernel: ide: failed opcode was: unknown
Jun  7 16:49:34 (none) user.err kernel: hda: drive not ready for command
Jun  7 16:50:34 (none) user.info kernel: ide-cd: cmd 0x28 timed out
Jun  7 16:50:34 (none) user.warn kernel: hda: DMA timeout retry
Jun  7 16:50:34 (none) user.err kernel: hda: timeout waiting for DMA
Jun  7 16:50:34 (none) user.warn kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jun  7 16:50:34 (none) user.warn kernel: ide: failed opcode was: unknown
Jun  7 16:50:34 (none) user.err kernel: hda: drive not ready for command
Jun  7 16:51:34 (none) user.info kernel: ide-cd: cmd 0x28 timed out
Jun  7 16:51:34 (none) user.warn kernel: hda: DMA timeout retry
Jun  7 16:51:34 (none) user.err kernel: hda: timeout waiting for DMA
Jun  7 16:51:34 (none) user.warn kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jun  7 16:51:34 (none) user.warn kernel: ide: failed opcode was: unknown
Jun  7 16:51:34 (none) user.err kernel: hda: drive not ready for command
Jun  7 16:51:34 (none) user.debug kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Jun  7 16:51:34 (none) user.debug kernel: ISO 9660 Extensions: RRIP_1991A
Jun  7 16:51:34 (none) user.info kernel: NTFS volume version 3.1.
Jun  7 16:51:34 (none) user.info kernel: NTFS volume version 3.1.
Jun  7 16:51:34 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-03-18 03:15:33 CET)
Jun  7 16:51:35 (none) user.info kernel: parport_pc 00:05: reported by Plug and Play ACPI
Jun  7 16:51:35 (none) user.info kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jun  7 16:51:35 (none) user.info kernel: ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun  7 16:51:35 (none) user.debug kernel: PCI parallel port detected: 14d2:8001, I/O at 0xeff0(0xefe0)
Jun  7 16:51:35 (none) user.info kernel: parport1: PC-style at 0xeff0 (0xefe0) [PCSPP,TRISTATE]
Jun  7 16:51:35 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:35 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:35 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:35 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:35 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:35 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte06.glcd loaded.
Jun  7 16:51:35 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:35 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:35 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:35 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:35 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:35 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte07.glcd loaded.
Jun  7 16:51:37 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:37 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:37 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:37 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:37 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:37 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte07.glcd loaded.
Jun  7 16:51:37 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:37 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:37 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:37 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:37 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:37 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte08.glcd loaded.
Jun  7 16:51:42 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:14.5 -> GSI 17 (level, low) -> IRQ 17
Jun  7 16:51:42 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:42 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:42 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:42 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:42 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:42 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte08.glcd loaded.
Jun  7 16:51:42 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:42 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:42 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:42 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:42 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:42 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte09.glcd loaded.
Jun  7 16:51:42 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte09.glcd loaded.
Jun  7 16:51:43 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte10.glcd loaded.
Jun  7 16:51:44 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:44 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:44 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:44 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:44 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:44 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte10.glcd loaded.
Jun  7 16:51:55 (none) user.info kernel: bootsplash: status on console 0 changed to on
Jun  7 16:51:56 (none) user.info kernel: Linux video capture interface: v2.00
Jun  7 16:51:56 (none) user.warn kernel: saa7146: register extension 'dvb'.
Jun  7 16:51:56 (none) user.warn kernel: saa7146: register extension 'budget dvb'.
Jun  7 16:51:56 (none) user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Jun  7 16:51:56 (none) user.warn kernel: saa7146: register extension 'budget_av'.
Jun  7 16:51:56 (none) user.warn kernel: saa7146: register extension 'budget_patch dvb'.
Jun  7 16:51:56 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Jun  7 16:51:56 (none) user.info kernel: bttv: driver version 0.9.17 loaded
Jun  7 16:51:56 (none) user.info kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Jun  7 16:51:56 (none) user.info kernel: bt878: AUDIO driver version 0.0.0 loaded
Jun  7 16:51:56 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
Jun  7 16:51:57 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Jun  7 16:51:57 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Jun  7 16:51:57 (none) user.info kernel: ivtv: Start initialization, version 1.4.0
Jun  7 16:51:57 (none) user.info kernel: ivtv: End initialization
Jun  7 16:51:57 (none) user.err vdr: [5644] cTimeMs: using monotonic clock (resolution is 999848 ns)
Jun  7 16:51:57 (none) user.err vdr: [5644] ERROR: invalid primary device number: 1
Jun  7 16:51:57 (none) user.err vdr: [5644] ERROR: no primary device found - using first device!
Jun  7 16:51:57 (none) user.err vdr: [5644] ERROR: invalid primary device number: 1
Jun  7 16:51:58 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:58 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:58 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:58 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:58 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:58 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte11.glcd loaded.
Jun  7 16:51:59 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:59 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte12.glcd loaded.
Jun  7 16:51:59 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:59 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte12.glcd loaded.
Jun  7 16:51:59 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:51:59 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:51:59 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:51:59 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte13.glcd loaded.
Jun  7 16:52:08 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:08 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:08 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:08 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:08 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:08 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte13.glcd loaded.
Jun  7 16:52:09 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:09 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:09 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:09 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:09 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:09 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:09 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:09 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:09 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:09 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:09 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:09 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:21 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:21 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:21 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:21 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:21 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:21 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:22 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:22 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:22 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:22 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:22 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:22 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:22 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:22 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:41 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:41 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:41 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:41 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:41 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:41 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:41 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:41 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:41 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:41 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:41 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:41 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:42 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:42 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:42 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:42 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:42 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:42 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:43 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:43 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:43 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:43 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:43 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:43 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:43 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:44 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:44 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:44 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:44 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:44 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:44 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:44 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:44 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:44 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:44 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:44 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:44 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:45 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:45 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:45 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:45 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:45 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:45 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:46 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:46 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:46 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:46 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:46 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:46 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:46 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:46 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:46 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:46 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:46 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:46 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:49 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:49 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:49 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:49 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:49 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:49 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:49 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:49 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:49 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:49 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:49 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:49 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:50 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:50 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:50 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:50 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:50 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:50 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:50 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:50 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:50 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:50 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:51 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:51 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:51 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:51 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:51 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:51 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:51 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:51 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:51 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:51 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:51 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:51 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:52 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:52 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:52 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:52 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:52 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:52 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:52 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:52 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:52 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:52 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:52 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:52 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:55 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:55 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:55 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:55 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:55 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:55 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:55 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:55 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:55 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:55 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:55 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:55 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:57 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:57 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:57 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:57 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:57 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:57 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:58 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:58 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:58 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:58 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:58 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:58 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:52:58 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:52:58 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:52:58 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:52:58 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:00 (none) user.notice kernel: klogd: exiting
Jun  7 16:53:00 (none) user.notice kernel: klogd: exiting
Jun  7 16:53:00 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-03-18 03:15:33 CET)
Jun  7 16:53:01 (none) user.info kernel: usbcore: registered new interface driver dm9601
Jun  7 16:53:01 (none) user.info kernel: usbcore: deregistering interface driver dm9601
Jun  7 16:53:01 (none) user.info kernel: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
Jun  7 16:53:01 (none) user.info kernel: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
Jun  7 16:53:01 (none) user.info kernel: natsemi dp8381x driver, version 2.1, Sept 11, 2006
Jun  7 16:53:01 (none) user.info kernel:   originally by Donald Becker <becker@scyld.com>
Jun  7 16:53:01 (none) user.info kernel:   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Jun  7 16:53:01 (none) user.info kernel: sis900.c: v1.08.10 Apr. 2 2006
Jun  7 16:53:01 (none) user.info kernel: Intel® PRO/1000 Network Driver - version 7.3.20-k2
Jun  7 16:53:01 (none) user.info kernel: Copyright © 1999-2006 Intel Corporation.
Jun  7 16:53:01 (none) user.info kernel: Intel® PRO/1000 Network Driver - version 7.3.20-k2
Jun  7 16:53:01 (none) user.info kernel: Copyright © 1999-2006 Intel Corporation.
Jun  7 16:53:02 (none) user.info kernel: 8139too Fast Ethernet driver 0.9.28
Jun  7 16:53:02 (none) user.info kernel: via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Jun  7 16:53:02 (none) user.info kernel: e100: Intel® PRO/100 Network Driver, 3.5.23-k4-NAPI
Jun  7 16:53:02 (none) user.info kernel: e100: Copyright© 1999-2006 Intel Corporation
Jun  7 16:53:02 (none) user.warn kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
Jun  7 16:53:02 (none) user.warn kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Jun  7 16:53:02 (none) user.info kernel: pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de
Jun  7 16:53:02 (none) user.info kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Jun  7 16:53:03 (none) user.info kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun  7 16:53:03 (none) user.warn kernel: 3c59x: Donald Becker and others.
Jun  7 16:53:03 (none) user.info kernel: 0000:02:08.0: 3Com PCI 3c920B-EMB-WNM (ATI Radeon 9100 IGP) at dcf3a000.
Jun  7 16:53:03 (none) user.info kernel: eth0:  setting half-duplex.
Jun  7 16:53:03 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:03 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:03 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:03 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:03 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:03 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:04 (none) user.notice kernel: klogd: exiting
Jun  7 16:53:04 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-03-18 03:15:33 CET)
Jun  7 16:53:04 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:04 (none) user.info kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
Jun  7 16:53:04 (none) user.info kernel: ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jun  7 16:53:04 (none) user.info kernel: ipw2200: Intel® PRO/Wireless 2200/2915 Network Driver, 1.2.2k
Jun  7 16:53:04 (none) user.info kernel: ipw2200: Copyright© 2003-2006 Intel Corporation
Jun  7 16:53:04 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:05 (none) user.debug kernel: orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun  7 16:53:05 (none) user.debug kernel: orinoco_tmd 0.15 (Joerg Dorchain <joerg@dorchain.net>)
Jun  7 16:53:05 (none) user.info kernel: usbcore: registered new interface driver zd1211rw
Jun  7 16:53:05 (none) user.info kernel: usbcore: deregistering interface driver zd1211rw
Jun  7 16:53:06 (none) user.info kernel: usbcore: registered new interface driver zd1211rw
Jun  7 16:53:06 (none) user.info kernel: usbcore: deregistering interface driver zd1211rw
Jun  7 16:53:06 (none) user.debug kernel: orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun  7 16:53:06 (none) user.info kernel: usbcore: registered new interface driver rtl8187
Jun  7 16:53:06 (none) user.info kernel: usbcore: deregistering interface driver rtl8187
Jun  7 16:53:06 (none) user.info kernel: usbcore: registered new interface driver prism54usb
Jun  7 16:53:06 (none) user.info kernel: usbcore: deregistering interface driver prism54usb
Jun  7 16:53:06 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:06 (none) user.info kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
Jun  7 16:53:06 (none) user.info kernel: ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jun  7 16:53:06 (none) user.info kernel: ipw2100: Intel® PRO/Wireless 2100 Network Driver, git-1.2.2
Jun  7 16:53:06 (none) user.info kernel: ipw2100: Copyright© 2003-2006 Intel Corporation
Jun  7 16:53:06 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:06 (none) user.info kernel: usbcore: registered new interface driver cdc_ether
Jun  7 16:53:06 (none) user.info kernel: usbcore: registered new interface driver rndis_host
Jun  7 16:53:07 (none) user.info kernel: usbcore: registered new interface driver rndis_wlan
Jun  7 16:53:07 (none) user.info kernel: usbcore: deregistering interface driver rndis_wlan
Jun  7 16:53:07 (none) user.info kernel: usbcore: deregistering interface driver rndis_host
Jun  7 16:53:07 (none) user.info kernel: usbcore: deregistering interface driver cdc_ether
Jun  7 16:53:07 (none) user.debug kernel: orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun  7 16:53:07 (none) user.debug kernel: orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
Jun  7 16:53:07 (none) user.debug kernel: orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun  7 16:53:07 (none) user.debug kernel: orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)
Jun  7 16:53:07 (none) user.info kernel: airo(): Probing for PCI adapters
Jun  7 16:53:07 (none) user.info kernel: airo(): Finished probing for PCI adapters
Jun  7 16:53:08 (none) user.debug kernel: orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun  7 16:53:08 (none) user.debug kernel: orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
Jun  7 16:53:08 (none) user.info kernel: Loaded prism54 driver, version 1.2
Jun  7 16:53:08 (none) user.info kernel: Unloaded prism54 driver
Jun  7 16:53:08 (none) user.info kernel: Loaded prism54 driver, version 1.2
Jun  7 16:53:08 (none) user.info kernel: Unloaded prism54 driver
Jun  7 16:53:10 (none) user.info kernel: usbcore: registered new interface driver rt2500usb
Jun  7 16:53:10 (none) user.info kernel: usbcore: deregistering interface driver rt2500usb
Jun  7 16:53:10 (none) user.info kernel: usbcore: registered new interface driver rt73usb
Jun  7 16:53:10 (none) user.info kernel: usbcore: deregistering interface driver rt73usb
Jun  7 16:53:10 (none) user.info kernel: usbcore: registered new interface driver zd1201
Jun  7 16:53:10 (none) user.info kernel: usbcore: deregistering interface driver zd1201
Jun  7 16:53:10 (none) user.info kernel: STRIP: Version 1.3A-STUART.CHESHIRE-MODULAR (unlimited channels)
Jun  7 16:53:11 (none) user.info kernel: STRIP: Module Unloaded
Jun  7 16:53:11 (none) user.info kernel: iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
Jun  7 16:53:11 (none) user.info kernel: iwl3945: Copyright© 2003-2007 Intel Corporation
Jun  7 16:53:11 (none) user.info kernel: iwl4965: Intel® Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
Jun  7 16:53:11 (none) user.info kernel: iwl4965: Copyright© 2003-2007 Intel Corporation
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:11 (none) user.info kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
Jun  7 16:53:11 (none) user.info kernel: ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:11 (none) user.info kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
Jun  7 16:53:11 (none) user.info kernel: ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun  7 16:53:11 (none) user.info kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
Jun  7 16:53:11 (none) user.info kernel: ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jun  7 16:53:11 (none) user.info kernel: usbcore: registered new interface driver usb8xxx
Jun  7 16:53:11 (none) user.info kernel: usbcore: deregistering interface driver usb8xxx
Jun  7 16:53:11 (none) user.debug kernel: ieee80211_crypt: unregistered algorithm 'NULL'
Jun  7 16:53:12 (none) user.info kernel: Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
Jun  7 16:53:12 (none) user.info kernel: Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
Jun  7 16:53:12 (none) user.info kernel: Broadcom 43xx-legacy driver loaded [ Features: PID, Firmware-ID: FW10 ]
Jun  7 16:53:12 (none) user.info kernel: Broadcom 43xx-legacy driver loaded [ Features: PID, Firmware-ID: FW10 ]
Jun  7 16:53:13 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:13 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:13 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:13 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:13 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:13 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:15 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:15 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:15 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:15 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:16 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:16 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:17 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:17 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:17 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:17 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:17 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:17 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:18 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:18 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:18 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:18 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:18 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:18 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:18 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:18 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:18 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:18 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:18 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:18 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:19 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:19 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:19 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:19 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:19 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:19 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:19 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:19 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:20 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:20 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:20 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:20 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:20 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:20 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:20 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:20 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:20 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:20 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:20 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:20 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:22 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:22 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:22 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:22 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:22 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:22 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:23 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:23 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:23 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:23 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:23 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:23 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:23 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:23 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:25 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:25 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:25 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:25 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:25 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:25 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:25 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:25 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:25 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:25 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:26 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Jun  7 16:53:26 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Jun  7 16:53:27 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:27 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:27 (none) user.warn kernel: 3c59x: Donald Becker and others.
Jun  7 16:53:27 (none) user.info kernel: 0000:02:08.0: 3Com PCI 3c920B-EMB-WNM (ATI Radeon 9100 IGP) at dcf3a000.
Jun  7 16:53:27 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:27 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:27 (none) user.info kernel: eth0:  setting half-duplex.
Jun  7 16:53:27 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:27 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:27 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:27 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.
Jun  7 16:53:27 (none) user.info showpic: framebuffer: Framebuffer initialized.
Jun  7 16:53:27 (none) user.debug showpic: glcdgraphics: image /etc/graphlcd/120x64/starte14.glcd loaded.
Jun  7 16:53:27 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 61
Jun  7 16:53:28 (none) user.info kernel: lirc_serial: auto-detected active high receiver
Jun  7 16:53:28 (none) user.info kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Jun  7 16:53:28 (none) user.info showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jun  7 16:53:28 (none) user.info showpic: framebuffer: The framebuffer device was opened successfully.
Jun  7 16:53:28 (none) user.info showpic: framebuffer: V01: xres: 800, yres 600, vyres: 600, bpp: 16, linelenght: 1600
Jun  7 16:53:28 (none) user.info showpic: framebuffer: The framebuffer device was mapped to memory successfully.[br
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #5 on: June 08, 2009, 12:41:14 »
Kann das sein das der treiber (modul) für den saa7134 nicht im dvb addon mit eingebunden ist?

gruß marcus
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #6 on: June 08, 2009, 12:45:35 »
Quote
Kann das sein das der treiber (modul) für den saa7134 nicht im dvb addon mit eingebunden ist?

gruß marcus
Weißt Du welches Modul der saa7134 benötigt?
Dann könntest Du mal nachschauen und ein "modprobe modulname" machen

Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #7 on: June 08, 2009, 12:49:29 »
Wenn ich modprobe saa7134 oder saa7134-dvb eingebe sagt der mir das modul kann nicht gefunden werden


benötigt wird glaube ich:
saa7134
saa7134-dvb
saa7134-alsa


marcus
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #8 on: June 08, 2009, 14:35:15 »
Quote
Wenn ich modprobe saa7134 oder saa7134-dvb eingebe sagt der mir das modul kann nicht gefunden werden


benötigt wird glaube ich:
saa7134
saa7134-dvb
saa7134-alsa


marcus
Habe mal nachgeschaut.
Im aktuellen DVB Addon (dvb-18.12.2008_107) sind diese Module nicht enthalten.
Mach bitte ein Ticket (Feature Request) im Mantis dazu auf.

Grüße
Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline boomer

  • Newbie
  • *
  • Posts: 33
    • View Profile
    • http://boomer45355.ath.cx
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #9 on: June 09, 2009, 08:49:31 »
Habe es hinbekommen.   :applaus  :applaus  :applaus




Müsste wenn ich es richtig gemacht habe, morgen ein update des dvb-addon online sein.  :unsure:

Nur mit dem Ton auf dem Asus Pundit habe ich noch Probleme, ist auch schon mal hier besprochen worden, aber es gab bis jetzt noch keine Lösung.

Gruß Marcus
Logged
MLD2.0.0,Softdevice/Vidix,Technisat Airstar2,AMD XP1800,80GB,ATI Radeon 9600, 256MB

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #10 on: June 09, 2009, 18:53:47 »
Quote
Habe es hinbekommen.   :applaus  :applaus  :applaus




Müsste wenn ich es richtig gemacht habe, morgen ein update des dvb-addon online sein.  :unsure:

Nur mit dem Ton auf dem Asus Pundit habe ich noch Probleme, ist auch schon mal hier besprochen worden, aber es gab bis jetzt noch keine Lösung.

Gruß Marcus
Super.

Hast Du mal Lust Dich damit zu beschäftigen?
--> http://www.minidvblinux.dyndns.org/bug/view.php?id=451
-->  Unterstützung für IMON VFD

Sollte kein großer Akt sein. Gibt´s nen Patch zu

Grüße
Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20527
    • View Profile
    • ClausMuus.de
Wird Diese Karte Unter Mld2 Unterstützt?
« Reply #11 on: June 09, 2009, 23:17:08 »
Hi boomer,

wenn's doch nicht hingehauen haben sollte, könnte es auch an meinem letzten dvb-update liegen. Seit dem macht das dvb-addon ja irgendwie ärger. Ich hab aber noch nicht genauer analysiert wo drann es liegt und welche Treiber überhaupt betroffen sind.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

[1] Archiv / MLD 2.x / General / Wird Diese Karte Unter Mld2 Unterstützt?
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.