[clausmuus]

1920*1080 ist HD-TV Auflösung

[MarMic]

hi claus,

ich glaube ich habe was gefunden muss das aber noch durchtesten. habe nun nen monitor dran der auflösungen jenseit 3000*3000 schafft :-P und der hat auch das problem das die karte net will allerdings hilft da etwas und das muss ich jetzt noch mit dem alten monitor testen, denn dann liegt die schuld EINDEUTIG BEI DIR :-P *nur spaß*

ich meld mich wenn ich den 50kg monitor zur siete gewälzt habe und den alten wieder dran habe :-P

greetz

[MarMic]

hi claus,

alsooooo folgendes szenario

ich boote den rechner hoch:

Code: [Select]

Mounting default filesystems:
===done===
Preparing read-only system directory:
Turn on DMA for /dev/hda:
===done===
Turn on DMA for /dev/hdc:
===done===
===done===
Setting up netware:
===done===
Setting timezone:
===done===
Importing addon: config
===done===
Linux filesystem found on /dev/hda1
  Mounting to /mnt/hda1:
===done===
Importing addon: keymap-de
===done===
Importing addon: locales
===done===
Linux filesystem found on /dev/hda2
  Mounting to /mnt/hda2:
===done===
Importing addon: install
===done===
Importing addon: dvb
===done===
Importing addon: dvb-usb
===done===
Importing addon: network
===done===
Importing addon: ssh
===done===
Importing addon: alsa
===done===
Importing addon: xorg
===done===
Importing addon: xorg-ati
===done===
Importing addon: xorg-nvidia
===done===
Importing addon: vdr
===done===
Importing addon: addons
===done===
Importing addon: message
===done===
Importing addon: setup
===done===
Importing addon: xinelib
===done===
Importing addon: xineliboutput
===done===
Installing addon: config
===done===
Installing addon: keymap-de
===done===
Installing addon: locales
===done===
Installing addon: install
===done===
Installing addon: dvb
Add freq_shift parameter
===done===
Installing addon: dvb-usb
===done===
Installing addon: network
===done===
Installing addon: ssh
Creating ssh rsa key:
===done===
Creating ssh dss key:
===done===
===done===
Installing addon: alsa
===done===
Installing addon: xorg
===done===
Installing addon: xorg-ati
===done===
Installing addon: xorg-nvidia
===done===
Installing addon: vdr
===done===
Installing addon: addons
===done===
Installing addon: message
===done===
Installing addon: setup
===done===
Installing addon: xinelib
===done===
Installing addon: xineliboutput
===done===
Load german keymap:
===done===
Loading sound driver:
===done===
Found hardware: "ICH" "Analog Devices AD1885" "AC97a:41445360" "0x1028" "0x010e"
Hardware is initialized using a generic method
Loading dvb driver
===done===
Loading usb dvb driver
===done===
Starting VDR
===done===
Found hardware: "ICH" "Analog Devices AD1885" "AC97a:41445360" "0x1028" "0x010e"
Hardware is initialized using a generic method

Starting sshd:
Listen on IP: ===done===

Starting xorg
===done===


X.Org X Server 1.9.0
Release Date: 2010-08-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux MLD.localdom 2.6.35.9 #6 SMP Mon Dec 20 16:21:10 CET 2010 i686
Kernel command line: initrd=/boot/initrd id=MLD-3.0.0 dir= vga=0x314 splash=verbose apm=off BOOT_IMAGE=/boot/kernel
Build Date: 16 September 2010  05:39:22PM
xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 21 18:07:18 2010
(==) Using config file: "/etc/X11/xorg.conf"
(II) [KMS] Kernel modesetting enabled.
Loading ati driver
===done===
Loading network driver
===done===
Connecting to network
===done===
Starting DHCP-client
===done===
Loading nvidia driver
===failed===
Setting up setup menu:
===done===
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.
220 MLD.localdom SVDRP VideoDiskRecorder 1.7.16; Tue Dec 21 18:07:41 2010; UTF-8
250 Message queued
221 MLD.localdom closing connection

monitor geht in standby! (orangenes licht kein signal)

Code: [Select]

[    45.736]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    45.736] X Protocol Version 11, Revision 0
[    45.736] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[    45.736] Current Operating System: Linux MLD.localdom 2.6.35.9 #6 SMP Mon Dec 20 16:21:10 CET 2010 i686
[    45.736] Kernel command line: initrd=/boot/initrd id=MLD-3.0.0 dir= vga=0x314 splash=verbose apm=off BOOT_IMAGE=/boot/kernel
[    45.736] Build Date: 16 September 2010  05:39:22PM
[    45.736] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[    45.740] Current version of pixman: 0.18.4
[    45.740]  Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    45.740] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    45.741] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 21 18:07:18 2010
[    45.747] (==) Using config file: "/etc/X11/xorg.conf"
[    45.753] (==) ServerLayout "Layout"
[    45.753] (==) No screen section available. Using defaults.
[    45.753] (**) |-->Screen "Default Screen Section" (0)
[    45.753] (**) |   |-->Monitor "<default monitor>"
[    45.754] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    45.754] (**) |-->Input Device "event0"
[    45.754] (**) |-->Input Device "event1"
[    45.754] (==) Automatically adding devices
[    45.754] (==) Automatically enabling devices
[    45.787] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    45.787]  Entry deleted from font path.
[    45.787] (==) FontPath set to:
built-ins
[    45.787] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    45.787] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    45.787] (II) Loader magic: 0x81f8e00
[    45.787] (II) Module ABI versions:
[    45.788]  X.Org ANSI C Emulation: 0.4
[    45.788]  X.Org Video Driver: 8.0
[    45.788]  X.Org XInput driver : 11.0
[    45.788]  X.Org Server Extension : 4.0
[    45.789] (--) PCI:*(0:1:0:0) 1002:5964:148c:2073 rev 1, Mem @ 0xe0000000/268435456, 0xff8f0000/65536, I/O @ 0x0000ec00/256, BIOS @ 0x????????/131072
[    45.789] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    45.790] (II) LoadModule: "extmod"
[    45.797] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    47.469] (II) Module extmod: vendor="X.Org Foundation"
[    47.469]  compiled for 1.9.0, module version = 1.0.0
[    47.469]  Module class: X.Org Server Extension
[    47.469]  ABI class: X.Org Server Extension, version 4.0
[    47.469] (II) Loading extension MIT-SCREEN-SAVER
[    47.469] (II) Loading extension XFree86-VidModeExtension
[    47.469] (II) Loading extension XFree86-DGA
[    47.469] (II) Loading extension DPMS
[    47.469] (II) Loading extension XVideo
[    47.469] (II) Loading extension XVideo-MotionCompensation
[    47.470] (II) Loading extension X-Resource
[    47.470] (II) LoadModule: "dbe"
[    47.471] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    47.503] (II) Module dbe: vendor="X.Org Foundation"
[    47.503]  compiled for 1.9.0, module version = 1.0.0
[    47.503]  Module class: X.Org Server Extension
[    47.503]  ABI class: X.Org Server Extension, version 4.0
[    47.503] (II) Loading extension DOUBLE-BUFFER
[    47.503] (II) LoadModule: "glx"
[    47.505] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    47.549] (II) Module glx: vendor="X.Org Foundation"
[    47.550]  compiled for 1.9.0, module version = 1.0.0
[    47.550]  ABI class: X.Org Server Extension, version 4.0
[    47.554] (==) AIGLX enabled
[    47.554] (II) Loading extension GLX
[    47.554] (II) LoadModule: "record"
[    47.575] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    47.575] (II) Module record: vendor="X.Org Foundation"
[    47.575]  compiled for 1.9.0, module version = 1.13.0
[    47.576]  Module class: X.Org Server Extension
[    47.576]  ABI class: X.Org Server Extension, version 4.0
[    47.576] (II) Loading extension RECORD
[    47.576] (II) LoadModule: "dri"
[    47.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    47.586] (II) Module dri: vendor="X.Org Foundation"
[    47.586]  compiled for 1.9.0, module version = 1.0.0
[    47.586]  ABI class: X.Org Server Extension, version 4.0
[    47.586] (II) Loading extension XFree86-DRI
[    47.586] (II) LoadModule: "dri2"
[    47.598] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    47.599] (II) Module dri2: vendor="X.Org Foundation"
[    47.599]  compiled for 1.9.0, module version = 1.2.0
[    47.599]  ABI class: X.Org Server Extension, version 4.0
[    47.599] (II) Loading extension DRI2
[    47.599] (==) Matched ati as autoconfigured driver 0
[    47.599] (==) Matched vesa as autoconfigured driver 1
[    47.599] (==) Matched fbdev as autoconfigured driver 2
[    47.599] (==) Assigned the driver to the xf86ConfigLayout
[    47.599] (II) LoadModule: "ati"
[    47.600] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    47.635] (II) Module ati: vendor="X.Org Foundation"
[    47.635]  compiled for 1.9.0, module version = 6.13.1
[    47.635]  Module class: X.Org Video Driver
[    47.635]  ABI class: X.Org Video Driver, version 8.0
[    47.635] (II) LoadModule: "radeon"
[    47.636] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    47.739] (II) Module radeon: vendor="X.Org Foundation"
[    47.739]  compiled for 1.9.0, module version = 6.13.1
[    47.739]  Module class: X.Org Video Driver
[    47.739]  ABI class: X.Org Video Driver, version 8.0
[    47.865] (II) LoadModule: "vesa"
[    47.867] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    47.892] (II) Module vesa: vendor="X.Org Foundation"
[    47.892]  compiled for 1.8.99.905, module version = 2.3.0
[    47.892]  Module class: X.Org Video Driver
[    47.892]  ABI class: X.Org Video Driver, version 8.0
[    47.892] (II) LoadModule: "fbdev"
[    47.893] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    47.894] (II) Module fbdev: vendor="X.Org Foundation"
[    47.894]  compiled for 1.8.99.905, module version = 0.4.2
[    47.894]  ABI class: X.Org Video Driver, version 8.0
[    47.894] (II) LoadModule: "evdev"
[    47.911] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.975] (II) Module evdev: vendor="X.Org Foundation"
[    47.975]  compiled for 1.9.0, module version = 2.3.2
[    47.975]  Module class: X.Org XInput Driver
[    47.975]  ABI class: X.Org XInput driver, version 11.0
[    47.975] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
....
....
       ATI Radeon HD 5450,
CEDAR
[    47.978] (II) VESA: driver for VESA chipsets: vesa
[    47.978] (II) FBDEV: driver for framebuffer: fbdev
[    47.978] (--) using VT number 2

[    48.004] (II) [KMS] Kernel modesetting enabled.
[    48.005] (WW) Falling back to old probe method for vesa
[    48.005] (WW) Falling back to old probe method for fbdev
[    48.005] (II) Loading sub module "fbdevhw"
[    48.005] (II) LoadModule: "fbdevhw"
[    48.017] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    48.026] (II) Module fbdevhw: vendor="X.Org Foundation"
[    48.026]  compiled for 1.9.0, module version = 0.0.2
[    48.026]  ABI class: X.Org Video Driver, version 8.0
[    48.026] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    48.026] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    48.026] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    48.026] (==) RADEON(0): Default visual is TrueColor
[    48.026] (==) RADEON(0): RGB weight 888
[    48.026] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    48.026] (--) RADEON(0): Chipset: "ATI Radeon 9200SE 5964 (AGP)" (ChipID = 0x5964)
[    48.027] (II) RADEON(0): AGP card detected
[    48.027] (II) RADEON(0): KMS Color Tiling: disabled
[    48.027] drmOpenDevice: node name is /dev/dri/card0
[    48.027] drmOpenDevice: open result is 10, (OK)
[    48.027] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    48.027] drmOpenDevice: node name is /dev/dri/card0
[    48.027] drmOpenDevice: open result is 10, (OK)
[    48.027] drmOpenByBusid: drmOpenMinor returns 10
[    48.027] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    48.043] (WW) RADEON(0): No outputs definitely connected, trying again...
[    48.043] (WW) RADEON(0): Unable to find connected outputs - setting 1024x768 initial framebuffer

so nun sieht man in top das X gar nicht läuft also:

startx

und siehe da ICH HABE BILD UND TON!

Code: [Select]

[   455.176]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[   455.176] X Protocol Version 11, Revision 0
[   455.176] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[   455.176] Current Operating System: Linux MLD.localdom 2.6.35.9 #6 SMP Mon Dec 20 16:21:10 CET 2010 i686
[   455.176] Kernel command line: initrd=/boot/initrd id=MLD-3.0.0 dir= vga=0x314 splash=verbose apm=off BOOT_IMAGE=/boot/kernel
[   455.176] Build Date: 16 September 2010  05:39:22PM
[   455.176] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[   455.176] Current version of pixman: 0.18.4
[   455.176]  Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[   455.176] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   455.177] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 21 18:14:07 2010
[   455.178] (==) Using config file: "/etc/X11/xorg.conf"
[   455.178] (==) ServerLayout "Layout"
[   455.178] (==) No screen section available. Using defaults.
[   455.178] (**) |-->Screen "Default Screen Section" (0)
[   455.178] (**) |   |-->Monitor "<default monitor>"
[   455.179] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[   455.179] (**) |-->Input Device "event0"
[   455.179] (**) |-->Input Device "event1"
[   455.179] (==) Automatically adding devices
[   455.179] (==) Automatically enabling devices
[   455.180] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   455.180]  Entry deleted from font path.
[   455.180] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   455.180]  Entry deleted from font path.
[   455.181] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   455.181]  Entry deleted from font path.
[   455.181] (==) FontPath set to:
built-ins
[   455.181] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   455.181] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[   455.181] (II) Loader magic: 0x81f8e00
[   455.181] (II) Module ABI versions:
[   455.181]  X.Org ANSI C Emulation: 0.4
[   455.181]  X.Org Video Driver: 8.0
[   455.181]  X.Org XInput driver : 11.0
[   455.181]  X.Org Server Extension : 4.0
[   455.182] (--) PCI:*(0:1:0:0) 1002:5964:148c:2073 rev 1, Mem @ 0xe0000000/268435456, 0xff8f0000/65536, I/O @ 0x0000ec00/256, BIOS @ 0x????????/131072
[   455.183] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   455.183] (II) LoadModule: "extmod"
[   455.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   455.186] (II) Module extmod: vendor="X.Org Foundation"
[   455.186]  compiled for 1.9.0, module version = 1.0.0
[   455.186]  Module class: X.Org Server Extension
[   455.186]  ABI class: X.Org Server Extension, version 4.0
[   455.186] (II) Loading extension MIT-SCREEN-SAVER
[   455.186] (II) Loading extension XFree86-VidModeExtension
[   455.186] (II) Loading extension XFree86-DGA
[   455.186] (II) Loading extension DPMS
[   455.186] (II) Loading extension XVideo
[   455.186] (II) Loading extension XVideo-MotionCompensation
[   455.186] (II) Loading extension X-Resource
[   455.186] (II) LoadModule: "dbe"
[   455.188] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   455.188] (II) Module dbe: vendor="X.Org Foundation"
[   455.188]  compiled for 1.9.0, module version = 1.0.0
[   455.188]  Module class: X.Org Server Extension
[   455.188]  ABI class: X.Org Server Extension, version 4.0
[   455.188] (II) Loading extension DOUBLE-BUFFER
[   455.188] (II) LoadModule: "glx"
[   455.190] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   455.191] (II) Module glx: vendor="X.Org Foundation"
[   455.191]  compiled for 1.9.0, module version = 1.0.0
[   455.191]  ABI class: X.Org Server Extension, version 4.0
[   455.191] (==) AIGLX enabled
[   455.191] (II) Loading extension GLX
[   455.191] (II) LoadModule: "record"
[   455.192] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   455.193] (II) Module record: vendor="X.Org Foundation"
[   455.193]  compiled for 1.9.0, module version = 1.13.0
[   455.193]  Module class: X.Org Server Extension
[   455.193]  ABI class: X.Org Server Extension, version 4.0
[   455.193] (II) Loading extension RECORD
[   455.193] (II) LoadModule: "dri"
[   455.195] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   455.195] (II) Module dri: vendor="X.Org Foundation"
[   455.195]  compiled for 1.9.0, module version = 1.0.0
[   455.196]  ABI class: X.Org Server Extension, version 4.0
[   455.196] (II) Loading extension XFree86-DRI
[   455.196] (II) LoadModule: "dri2"
[   455.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   455.197] (II) Module dri2: vendor="X.Org Foundation"
[   455.198]  compiled for 1.9.0, module version = 1.2.0
[   455.198]  ABI class: X.Org Server Extension, version 4.0
[   455.198] (II) Loading extension DRI2
[   455.198] (==) Matched ati as autoconfigured driver 0
[   455.198] (==) Matched vesa as autoconfigured driver 1
[   455.198] (==) Matched fbdev as autoconfigured driver 2
[   455.198] (==) Assigned the driver to the xf86ConfigLayout
[   455.198] (II) LoadModule: "ati"
[   455.198] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   455.199] (II) Module ati: vendor="X.Org Foundation"
[   455.199]  compiled for 1.9.0, module version = 6.13.1
[   455.199]  Module class: X.Org Video Driver
[   455.199]  ABI class: X.Org Video Driver, version 8.0
[   455.199] (II) LoadModule: "radeon"
[   455.200] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   455.202] (II) Module radeon: vendor="X.Org Foundation"
[   455.202]  compiled for 1.9.0, module version = 6.13.1
[   455.202]  Module class: X.Org Video Driver
[   455.202]  ABI class: X.Org Video Driver, version 8.0
[   455.202] (II) LoadModule: "vesa"
[   455.203] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   455.203] (II) Module vesa: vendor="X.Org Foundation"
[   455.203]  compiled for 1.8.99.905, module version = 2.3.0
[   455.203]  Module class: X.Org Video Driver
[   455.203]  ABI class: X.Org Video Driver, version 8.0
[   455.203] (II) LoadModule: "fbdev"
[   455.204] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   455.205] (II) Module fbdev: vendor="X.Org Foundation"
[   455.205]  compiled for 1.8.99.905, module version = 0.4.2
[   455.205]  ABI class: X.Org Video Driver, version 8.0
[   455.205] (II) LoadModule: "evdev"
[   455.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   455.208] (II) Module evdev: vendor="X.Org Foundation"
[   455.208]  compiled for 1.9.0, module version = 2.3.2
[   455.208]  Module class: X.Org XInput Driver
[   455.208]  ABI class: X.Org XInput driver, version 11.0
[   455.208] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
....
.....
ATI Radeon HD 5450,
CEDAR
[   455.211] (II) VESA: driver for VESA chipsets: vesa
[   455.211] (II) FBDEV: driver for framebuffer: fbdev
[   455.211] (--) using VT number 5

[   455.219] (II) [KMS] Kernel modesetting enabled.
[   455.219] (WW) Falling back to old probe method for vesa
[   455.219] (WW) Falling back to old probe method for fbdev
[   455.219] (II) Loading sub module "fbdevhw"
[   455.219] (II) LoadModule: "fbdevhw"
[   455.221] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   455.222] (II) Module fbdevhw: vendor="X.Org Foundation"
[   455.222]  compiled for 1.9.0, module version = 0.0.2
[   455.222]  ABI class: X.Org Video Driver, version 8.0
[   455.222] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[   455.222] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   455.222] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   455.222] (==) RADEON(0): Default visual is TrueColor
[   455.222] (==) RADEON(0): RGB weight 888
[   455.222] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   455.222] (--) RADEON(0): Chipset: "ATI Radeon 9200SE 5964 (AGP)" (ChipID = 0x5964)
[   455.223] (II) RADEON(0): AGP card detected
[   455.223] (II) RADEON(0): KMS Color Tiling: disabled
[   455.223] drmOpenDevice: node name is /dev/dri/card0
[   455.223] drmOpenDevice: open result is 11, (OK)
[   455.223] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   455.223] drmOpenDevice: node name is /dev/dri/card0
[   455.223] drmOpenDevice: open result is 11, (OK)
[   455.223] drmOpenByBusid: drmOpenMinor returns 11
[   455.223] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   455.282] (II) RADEON(0): Output VGA-0 has no monitor section
[   455.307] (II) RADEON(0): Output DVI-0 has no monitor section
[   455.313] (II) RADEON(0): Output S-video has no monitor section
[   455.372] (II) RADEON(0): EDID for output VGA-0
[   455.372] (II) RADEON(0): Manufacturer: IVM  Model: 2140  Serial#: 10088587
[   455.373] (II) RADEON(0): Year: 2000  Week: 48
[   455.373] (II) RADEON(0): EDID Version: 1.1
[   455.373] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   455.373] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreen
[   455.373] (II) RADEON(0): Max Image Size [cm]: horiz.: 40  vert.: 30
[   455.373] (II) RADEON(0): Gamma: 2.54
[   455.373] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   455.373] (II) RADEON(0): redX: 0.625 redY: 0.340   greenX: 0.292 greenY: 0.604
[   455.373] (II) RADEON(0): blueX: 0.150 blueY: 0.070   whiteX: 0.283 whiteY: 0.297
[   455.373] (II) RADEON(0): Supported established timings:
[   455.373] (II) RADEON(0): 640x480@60Hz
[   455.373] (II) RADEON(0): 640x480@67Hz
[   455.373] (II) RADEON(0): 640x480@72Hz
[   455.373] (II) RADEON(0): 640x480@75Hz
[   455.373] (II) RADEON(0): 800x600@56Hz
[   455.373] (II) RADEON(0): 800x600@60Hz
[   455.373] (II) RADEON(0): 800x600@72Hz
[   455.373] (II) RADEON(0): 800x600@75Hz
[   455.373] (II) RADEON(0): 832x624@75Hz
[   455.373] (II) RADEON(0): 1024x768@60Hz
[   455.373] (II) RADEON(0): 1024x768@70Hz
[   455.373] (II) RADEON(0): 1024x768@75Hz
[   455.373] (II) RADEON(0): 1280x1024@75Hz
[   455.373] (II) RADEON(0): 1152x864@75Hz
[   455.373] (II) RADEON(0): Manufacturer's mask: 0
[   455.373] (II) RADEON(0): Supported standard timings:
[   455.373] (II) RADEON(0): #0: hsize: 1600  vsize 1200  refresh: 97  vid: 26025
[   455.373] (II) RADEON(0): #1: hsize: 1792  vsize 1344  refresh: 75  vid: 20417
[   455.373] (II) RADEON(0): #2: hsize: 1856  vsize 1392  refresh: 75  vid: 20425
[   455.373] (II) RADEON(0): #3: hsize: 2048  vsize 1536  refresh: 80  vid: 21729
[   455.373] (II) RADEON(0):  
[   455.373] (II) RADEON(0):  
[   455.373] (II) RADEON(0):  
[   455.373] (II) RADEON(0):  
[   455.373] (II) RADEON(0): EDID (in hex):
[   455.373] (II) RADEON(0):  00ffffffffffff0026cd40218bf09900
[   455.373] (II) RADEON(0):  300a01010e281e9ae80e88a0574a9a26
[   455.373] (II) RADEON(0):  12484c3fef80a965c14fc94fe1540101
[   455.373] (II) RADEON(0):  010101010101000000fe000000000000
[   455.373] (II) RADEON(0):  0000000000000000000000fe00000000
[   455.373] (II) RADEON(0):  00000000000000000000000000fe0000
[   455.373] (II) RADEON(0):  000000000000000000000000000000fe
[   455.373] (II) RADEON(0):  00000000000000000000000000000036
[   455.373] (II) RADEON(0): EDID vendor "IVM", prod id 8512
[   455.373] (II) RADEON(0): Printing DDC gathered Modelines:
[   455.373] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   455.373] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   455.373] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   455.373] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   455.373] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   455.373] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   455.373] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   455.374] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   455.374] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   455.374] (II) RADEON(0): Modeline "1792x1344"x0.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
[   455.374] (II) RADEON(0): Modeline "1856x1392"x0.0  288.00  1856 1984 2208 2560  1392 1393 1396 1500 -hsync +vsync (112.5 kHz)
[   455.374] (II) RADEON(0): Printing probed modes for output VGA-0
[   455.374] (II) RADEON(0): Modeline "1856x1392"x75.0  288.00  1856 1984 2208 2560  1392 1395 1399 1500 -hsync +vsync (112.5 kHz)
[   455.374] (II) RADEON(0): Modeline "1792x1344"x75.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
[   455.374] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   455.374] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   455.374] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   455.374] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   455.374] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   455.374] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[   455.374] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   455.374] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   455.374] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   455.399] (II) RADEON(0): EDID for output DVI-0
[   455.405] (II) RADEON(0): EDID for output S-video
[   455.405] (II) RADEON(0): Output VGA-0 connected
[   455.405] (II) RADEON(0): Output DVI-0 disconnected
[   455.405] (II) RADEON(0): Output S-video disconnected
[   455.405] (II) RADEON(0): Using exact sizes for initial modes
[   455.405] (II) RADEON(0): Output VGA-0 using initial mode 1856x1392
[   455.405] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   455.405] (II) RADEON(0): mem size init: gart size :1feff000 vram size: s:8000000 visible:75e5000
[   455.405] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[   455.414] (**) RADEON(0): Display dimensions: (400, 300) mm
[   455.414] (**) RADEON(0): DPI set to (117, 117)
[   455.414] (II) Loading sub module "fb"
[   455.414] (II) LoadModule: "fb"
[   455.416] (II) Loading /usr/lib/xorg/modules/libfb.so
[   455.476] (II) Module fb: vendor="X.Org Foundation"
[   455.476]  compiled for 1.9.0, module version = 1.0.0
[   455.476]  ABI class: X.Org ANSI C Emulation, version 0.4
[   455.476] (II) Loading sub module "ramdac"
[   455.476] (II) LoadModule: "ramdac"
[   455.476] (II) Module "ramdac" already built-in
[   455.476] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[   455.476] (II) Loading sub module "shadow"
[   455.476] (II) LoadModule: "shadow"
[   455.478] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   455.583] (II) Module shadow: vendor="X.Org Foundation"
[   455.583]  compiled for 1.9.0, module version = 1.1.0
[   455.583]  ABI class: X.Org ANSI C Emulation, version 0.4
[   455.583] (II) UnloadModule: "vesa"
[   455.583] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   455.583] (II) UnloadModule: "fbdev"
[   455.583] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   455.583] (II) UnloadModule: "fbdevhw"
[   455.583] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[   455.583] (--) Depth 24 pixmap format is 32 bpp
[   455.584] (II) RADEON(0): Front buffer size: 10092K
[   455.584] (II) RADEON(0): VRAM usage limit set to 99568K
[   455.594] (==) RADEON(0): Backing store disabled
[   455.594] (WW) RADEON(0): Direct rendering disabled
[   455.594] (II) RADEON(0): Acceleration disabled
[   455.594] (==) RADEON(0): DPMS enabled
[   455.594] (==) RADEON(0): Silken mouse enabled
[   455.594] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   455.595] (--) RandR disabled
[   455.595] (II) Initializing built-in extension Generic Event Extension
[   455.595] (II) Initializing built-in extension SHAPE
[   455.595] (II) Initializing built-in extension MIT-SHM
[   455.595] (II) Initializing built-in extension XInputExtension
[   455.595] (II) Initializing built-in extension XTEST
[   455.595] (II) Initializing built-in extension BIG-REQUESTS
[   455.595] (II) Initializing built-in extension SYNC
[   455.595] (II) Initializing built-in extension XKEYBOARD
[   455.595] (II) Initializing built-in extension XC-MISC
[   455.595] (II) Initializing built-in extension SECURITY
[   455.595] (II) Initializing built-in extension XINERAMA
[   455.595] (II) Initializing built-in extension XFIXES
[   455.595] (II) Initializing built-in extension RENDER
[   455.595] (II) Initializing built-in extension RANDR
[   455.595] (II) Initializing built-in extension COMPOSITE
[   455.595] (II) Initializing built-in extension DAMAGE
[   455.595] (II) Initializing built-in extension GESTURE
[   455.625] (II) AIGLX: Screen 0 is not DRI2 capable
[   455.625] (II) AIGLX: Screen 0 is not DRI capable
[   456.395] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[   456.395] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   456.448] (II) RADEON(0): Setting screen physical size to 491 x 368
[   456.623] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   457.174] (**) event0: always reports core events
[   457.174] (**) event0: Device: "/dev/input/event0"
[   457.174] (II) event0: Found keys
[   457.174] (II) event0: Configuring as keyboard
[   457.174] (II) XINPUT: Adding extended input device "event0" (type: KEYBOARD)
[   457.174] (**) Option "xkb_rules" "evdev"
[   457.174] (**) Option "xkb_model" "evdev"
[   457.174] (**) Option "xkb_layout" "us"
[   457.181] (II) XKB: generating xkmfile /tmp/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[   457.242] (**) event1: always reports core events
[   457.242] (**) event1: Device: "/dev/input/event1"
[   457.243] (II) event1: Found 3 mouse buttons
[   457.243] (II) event1: Found scroll wheel(s)
[   457.243] (II) event1: Found relative axes
[   457.243] (II) event1: Found x and y relative axes
[   457.243] (II) event1: Found absolute axes
[   457.243] (II) evdev-grail: failed to open grail, no gesture support
[   457.243] (II) event1: Configuring as mouse
[   457.243] (**) event1: YAxisMapping: buttons 4 and 5
[   457.243] (**) event1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   457.243] (II) XINPUT: Adding extended input device "event1" (type: MOUSE)
[   457.243] (II) event1: initialized for relative axes.
[   457.243] (WW) event1: ignoring absolute axes.
[   457.791] (II) XKB: generating xkmfile /tmp/server-1B5353734E7854C1F2B0553E65A16986C9AAC402.xkm

so achja 100% cpu last trotz graka treiber und xinelib.full denke das liegt an [   455.405] (II) RADEON(0): Output VGA-0 using initial mode 1856x1392. wenn vdr das bild auf die größe hochrechnet WOHA

so claus ne idee? wieso ich startx manuel eingeben muss und bei anderen rechnern nicht?

[MarMic]

hi claus,

wegen den fehlenden ttys bei mir, könnte es an dem hier liegen:

Activating KMS

First, make sure your kernel configuration has CONFIG_FRAMEBUFFER_CONSOLE enabled. Most sane configurations have it built into the kernel, but you can have it as a module (fbcon.ko), too. In that case make sure this module is loaded before or along with nouveau.ko. Otherwise your virtual console appears frozen.

With recent nouveau, KMS is on by default, unless you disable it with modeset=0 option.

hört sich für mich zumindest stark danach an. brauchen wir KMS eigentlich? habe das gefühl das macht mehr probleme als es effizienz bringt!?

quelle:nouveau kms

fuc* das ist ja sogar gesetzt in .config hmmmm ach man nun weiss ich net mehr weiter!

[clausmuus]

Deaktiviere doch einfach mal alle drei KMS einträge in der Kernel Config und teste ob's dann besser geht.

Claus

[MarMic]

hi claus,

habe grade etwas intressantes gefunden.

also ich teste rum mit der idee im hinterkopf: das wir die module nicht manuel in der init.d laden müssen, sondern xorg das mit den richtigen parametern macht wenns soweit ist.
So nun habe ich etwas entdeckt das mich sehr verwirrt:

Code: [Select]

MLD> ls /etc/addons/
active
MLD-3.0.0_config.devel-0_4.sfs
MLD-3.0.0_install-0_59.sfs
MLD-3.0.0_kernel-2.6.35.9_alsa-1.0.23_22.sfs
MLD-3.0.0_kernel-2.6.35.9_dvb-2010.12.20_28.sfs
MLD-3.0.0_kernel-2.6.35.9_dvb-usb-2010.12.20_5.sfs
MLD-3.0.0_kernel-2.6.35.9_network-0_16.sfs
MLD-3.0.0_keymap-de-0_10.sfs
MLD-3.0.0_locales-0_18.sfs
MLD-3.0.0_ssh-0.52_9.sfs
MLD-3.0.0_vdrapi-1.7.16_addons-0.4.0_11.sfs
MLD-3.0.0_vdrapi-1.7.16_message-0.0.1_1.sfs
MLD-3.0.0_vdrapi-1.7.16_setup-0.3.1_26.sfs
MLD-3.0.0_vdrapi-1.7.16_vdr-1.7.16_90.sfs
MLD-3.0.0_vdrapi-1.7.16_xineliboutput-2010.12.14_23.sfs
MLD-3.0.0_xinelib.full-1.29_2.sfs
MLD-3.0.0_xorg-1.9.0.902_12.sfs
MLD>

kein xorg-ati!

nun xorg.log trotz failed load module r128:

Code: [Select]

43.789] (II) R128(0): Memory manager initialized to (0,0) (1280,3276)
[    43.789] (II) R128(0): Reserved area from (0,960) to (1280,962)
[    43.789] (II) R128(0): Largest offscreen area available: 1280 x 2314
[    43.790] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)

mit lsmod findet kein r128! aber tv läuft im fullscreen mit 50%

ich habe nun noch ein testpacket in dem ich das manuelle laden der module in der init.d/xorg-ati gelöscht habe, denn meine idee ist ja das xorg das dann automatisch lädt, da er die karte erkennt und wir uns das zZ beißen

im nächsten post gehts weiter

[MarMic]

hi claus,

also so klappts bei mir auch mit der radeon (die ich normal immer manuel anstoßen musste)

xorg-ati abgeändert in:

Code: [Select]

MLD> cat /etc/init.d/xorg-ati
#!/bin/sh
#
# load or unload usb filesystem drivers

case "$1" in
        start)
                . /etc/init.d/rc.functions

                echo "NOT Loading ati driver"
              ;;
        stop)
                . /etc/init.d/rc.functions

                echo "NOT Unloading ati driver"
              ;;
        restart)
                $0 stop && $0 start
              ;;
        init)
                start=1
              ;;
        *)
                echo "Usage $0 {start | stop | restart}" >&2
                exit 1
esac
MLD>

also das load modules komplett entfernt. nun

bei laden von xorg checkt er wie gedacht seine *_drv in dem fall ati_drv.so und danach radeon_drv.so => das funzt wohl dann auch und erlädt mri dann die radeon module:

Code: [Select]

  79.352] (II) RADEON(0): #0: hsize: 800  vsize 600  refresh: 85  vid: 22853
[    79.352] (II) RADEON(0): #1: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[    79.352] (II) RADEON(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    79.352] (II) RADEON(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    79.352] (II) RADEON(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    79.352] (II) RADEON(0): EDID (in hex):
[    79.352] (II) RADEON(0):  00ffffffffffff0028aeb100ac0b0000
[    79.352] (II) RADEON(0):  220801011d2018a0e89d03a255479827
[    79.352] (II) RADEON(0):  10484ffffe0045596159714f81408180
[    79.352] (II) RADEON(0):  01010101010100000000000000000000
[    79.352] (II) RADEON(0):  00000000000000000000000000000000
[    79.352] (II) RADEON(0):  00000000000000000000000000000000
[    79.352] (II) RADEON(0):  00000000000000000000000000000000
[    79.352] (II) RADEON(0):  0000000000000000000000000000009e
[    79.352] (II) RADEON(0): EDID vendor "JEN", prod id 177
[    79.358] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[    79.358] Unhandled monitor type 0
[    79.358] (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
[    79.363] Changing OV0_BASE_ADDR from 0xe0000000 to 0xe0400000
[    79.470] (II) event0: Device reopened after 1 attempts.
[    79.470] (II) event1: Device reopened after 1 attempts.

edit: vergessen:

Code: [Select]

MLD> lsmod | grep radeon
radeon                681029  0
drm_kms_helper         23380  1 radeon
ttm                    45671  1 radeon
drm                   142211  3 radeon,drm_kms_helper,ttm
i2c_algo_bit            4172  1 radeon
MLD>


jetzt teste ich noch obs am manuellen vorher laden lag das ich kein bild hatte (oder obs daran liegt das ich neuere versionen habe: xorg)

greetz

[MarMic]

hi claus,

also hier gehts auch mit dem vorher laden, aber der lädt dann wirklich alles. r128, radeon, noveau usw usw und wenn man das weglässt lädt er nur das was er braucht.

das ich nun auch bild habe muss also an meinem xorg liegen (neuere version) bzw um wirklich den fehler zu finden muss ich weiter auf 10_10 bauen... also ich bau mir mal wieder die devel umgebung auf maverick up2date!

greetz

Code: [Select]

(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] This chipset requires a kernel module version of 1.8.0,
[dri] but the kernel reports a version of 2.5.0.[dri] If using legacy modesetting, upgrade your kernel.
[dri] If using kernel modesetting, make sure your module is
[dri] loaded prior to starting X, and that this driver was built
[dri] with support for KMS.
[dri] Disabling DRI.

also so wie ich das verstehe ist der chip auf der karte zu alt bzw kenrel modul 1.8.0 und wir bauen mit mit 2.5.0? kann ja sein die karte ist ja schließlich älter! ich versuchs noch mit meiner x1950xt wenn da auch sowas kommt, müssen wir doch die module vorher mitd er hand laden? dann habe ich aber wieder kein bild :-P

greetz

[Matthias]

Mit der neuen Methode von Marmic wird bei mir (Nvidia G210) der noveau Treiber automatisch geladen + TV Bild

Matthias

[clausmuus]

ok, ich werd das laden der Treiber rausnehmen und das xorg überlassen.
Außerdem bin ich grad dabei den Kram ein wenig auf zu räumen, sprich die einzelnen Addons für die unterschiedlichen Grafikkarten fliegen wieder raus. Die Kernel Module sind mit im xorg drin. Die xine Module mit im xinelib Addon. dri habe ich erst mal ausgelagert.
Den nvidia Treiber habe ich erst mal weg gelassen, noveau ist natürlich mit drin.

Das Update wird's nachher geben. Ich sag dann noch mal Bescheid.

Claus

[MarMic]

hi claus,

ich bin dabei rauszufidnen wieso nvidia nicht geht! denke ich habs bald! dann sollte auch nvidia gehen! du hattest zb ati_drv.so usw in den xorg-ati das wird nicht gebraucht das ist bei mri alles in xorg drin? denke das meinst du auch!?

greetz

edit:// doch nicht

modprobe: can't load module nvidia (kernel/drivers/video/nvidia.ko): Cannot allocate memory
(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA:     system's kernel log for additional error messages.
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) No drivers available.

immerhin kommt die meldung von xorg!

http://wiki.debian.org/NvidiaGraphicsDrive...s#config-manual

hat also leider net geholfen :-( nun bin ich ratlos. achja für was ist dieses dri überhaupt?

[clausmuus]

DRI = Direct Rendering Infrastructure
Soweit ich das verstanden habe ist damit ein performanter Zugriff auf die Grafikkarte möglich. Muss man halt mal ausprobieren ob das für uns relevant ist, ob mit dem Addon xorg-dri irgendwas besser läuft als ohne (das Addon wird's nachher geben)

Claus

[MarMic]

hi claus,

kk das kann ja matt und ich naher testen. ich mach grade wieder ne 10_10 umgebung tauglich! das hat keinen sinn mit dem xorg zeugs wenn ich andere module habe als du usw usw. also das mit nvidia.ko kann ich mir nur erklären das es für den flaschen kernel compiliert wird!

greetz

edit://

Die Direct Rendering Infrastructure (abgekürzt DRI) ist ein freies Softwarepaket, das zum X-Window-System gehört. Es stellt im X-Server eine Schnittstelle zur Verfügung über die Programme direkt auf die 3D-Hardware des Computers zugreifen können, um OpenGL-Beschleunigung zu verwenden. Der direkte Zugriff vermeidet, dass die Daten erst durch den verhältnismäßig langsamen X-Server verarbeitet werden müssen.

na da ist amn doch gleich viel schlauer 3d hardware accelartion für usn gleich absolut unintressant!
 

[clausmuus]

Und was ist mit openGL? ist das auch nur für 3D Kram, und nicht für Videos?

[MarMic]

hi claus,

laut wiki auch 2d!

OpenGL (Open Graphics Library) ist eine Spezifikation für eine plattform- und programmiersprachenunabhängige Programmierschnittstelle zur Entwicklung von 2D- und 3D-Computergrafik. Der OpenGL-Standard beschreibt etwa 250 Befehle, die die Darstellung komplexer 3D-Szenen in Echtzeit erlauben. Zudem können andere Organisationen (zumeist Hersteller von Grafikkarten) proprietäre Erweiterungen definieren.

greetz