1 [2] 3 >>> Archiv / MLD 3.x / Development / Soundprobleme
 

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #15 on: July 02, 2011, 17:44:33 »
Code: [Select]
MLD> modinfo snd_via82xx-modem
filename:       snd_via82xx-modem
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Soundprobleme
« Reply #16 on: July 02, 2011, 18:08:54 »
hmm das würde aussagen das es keine parameter hat da bin cih mit meinem geringen linux wissen überfragt

greetz
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #17 on: July 03, 2011, 21:46:48 »
Um es mal zu verallgemeinern: snd-via82xx muss geladen werden, ansonsten kann man keine Ausgabegeräte einstellen. Es ist dann egal ob ich snd_hda_intel, snd_hda_codec, snd_hda_codec_via lade, sobald eine Option wie index=-2 angegeben wird, erscheint der Fehler not found in modules.dep (im webif).
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Soundprobleme
« Reply #18 on: July 03, 2011, 23:35:58 »
und manuel ein modprobe mit index=-2 geht?
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #19 on: July 05, 2011, 17:59:30 »
Das modinfo nichts ausspuckt, liegt mal wieder an nem Busybox Problem. Nen "modinfo snd_via82xx_modem" (also "_" anstatt "-" genommen) ist auskunftsfreudiger...
Demnach gibt's schon nen Parameter "index", und ich kann das Modul auch mit Parameter laden.

Nachdem ich das nun ein wenig weiter untersucht habe, muss ich feststellen, das da nen Fehler im Modul lade Script ist. Es funktioniert derzeit nicht mit Modul Parametern. Morgen wird's ne neue initramfs geben bei der Das behoben ist.

Claus
« Last Edit: July 05, 2011, 18:00:02 by clausmuus »
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #20 on: July 15, 2011, 21:49:55 »
Ich hab noch ne Idee,... Deine Soundkarte ist nicht rein zufällig ne onbord USB Karte? Ich habe nämlich so nen Teil in meinem PC und das ist ganz und gar nicht einfach die zum laufen zu bekommen. Meine braucht nen PCI und auch USB Treiber. Einfach ekelig so nen teil.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #21 on: July 16, 2011, 00:42:19 »
Leider nicht, sieht jedenfalls nicht so aus, dachte ich zuerst.

http://www.datasheetsite.com/datasheet/AD1888

Ich hab mir mal die Windows Treiber gezogen, in der inf steht das device als PCI drin  :computertod
« Last Edit: July 16, 2011, 02:34:44 by niesen »
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #22 on: July 19, 2011, 00:35:39 »
OK, ich hab noch nen Vorschlag. Zum einen hab ich das alsa-Addon überarbeitet und einige bisher fehlende Treiber hinzugefügt. Eventuell ist ja was dabei was bei Dir benötigt wird.
Außerdem könntest Du mal die /var/log/messages danach durchsuchen ob ne Firmware geladen werden soll, aber nicht gefunden wurde.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #23 on: July 20, 2011, 19:55:16 »
Wahrscheinlich hast du bis hierher 100 anderen Leuten geholfen :D

Ich hab ne Soundkarte raufgesteckt mit CMI8738 Chip, eine Creative SB Live 5.1. hab ich auch noch da, die funktionieren, aber mit AD1888 immernoch dasselbe Problem.

Im Bios hab ich den Onboard Sound deaktiviert, der AD1888 wird aber noch erkannt..


Message.log mit funktionierender CMI Karte und aktiviertem Onboard Sound:

EDIT: Die CMI8738 wird nicht immer erkannt. Wenn sie erkannt wird, läuft sie. Der AD1888 wird dagegen sogar erkannt wenn er im Bios ausgeschaltet ist und läuft    nicht.

[code]@Home
Services

    Online

System

    Addons
    Commands
    Install
    Logfiles
    Setup

Show logfiles of your system

    System Messages
    System Startup
    VDR frontend
    X start
    XOrg

/var/log/messages

Jul 20 18:57:47 (none) syslog.info syslogd started: BusyBox v1.18.5
Jul 20 18:57:47 (none) user.notice kernel: klogd started: BusyBox v1.18.5 (2011-07-20 03:40:50 CEST)
Jul 20 18:57:47 (none) user.notice kernel: Linux version 3.0.0-rc3.59 (nightbuild@mld-devel) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #1 SMP Wed Jul 20 03:37:36 CEST 2011
Jul 20 18:57:47 (none) user.info kernel: BIOS-provided physical RAM map:
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 0000000000100000 - 000000000ffb0000 (usable)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 000000000ffb0000 - 000000000ffc0000 (ACPI data)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 000000000ffc0000 - 000000000fff0000 (ACPI NVS)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 000000000fff0000 - 0000000010000000 (reserved)
Jul 20 18:57:47 (none) user.info kernel:  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Jul 20 18:57:47 (none) user.notice kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
Jul 20 18:57:47 (none) user.info kernel: DMI 2.3 present.
Jul 20 18:57:47 (none) user.debug kernel: DMI: System manufacturer System Product Name/K8V-X SE, BIOS 1015.001 04/20/2006
Jul 20 18:57:47 (none) user.debug kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jul 20 18:57:47 (none) user.debug kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Jul 20 18:57:47 (none) user.info kernel: last_pfn = 0xffb0 max_arch_pfn = 0x100000
Jul 20 18:57:47 (none) user.debug kernel: MTRR default type: uncachable
Jul 20 18:57:47 (none) user.debug kernel: MTRR fixed ranges enabled:
Jul 20 18:57:47 (none) user.debug kernel:   00000-9FFFF write-back
Jul 20 18:57:47 (none) user.debug kernel:   A0000-EFFFF uncachable
Jul 20 18:57:47 (none) user.debug kernel:   F0000-FFFFF write-protect
Jul 20 18:57:47 (none) user.debug kernel: MTRR variable ranges enabled:
Jul 20 18:57:47 (none) user.debug kernel:   0 base 0000000000 mask FFF0000000 write-back
Jul 20 18:57:47 (none) user.debug kernel:   1 disabled
Jul 20 18:57:47 (none) user.debug kernel:   2 disabled
Jul 20 18:57:47 (none) user.debug kernel:   3 disabled
Jul 20 18:57:47 (none) user.debug kernel:   4 disabled
Jul 20 18:57:47 (none) user.debug kernel:   5 disabled
Jul 20 18:57:47 (none) user.debug kernel:   6 disabled
Jul 20 18:57:47 (none) user.debug kernel:   7 disabled
Jul 20 18:57:47 (none) user.info kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jul 20 18:57:47 (none) user.info kernel: found SMP MP-table at [c00ff780] ff780
Jul 20 18:57:47 (none) user.debug kernel: initial memory mapped : 0 - 01c00000
Jul 20 18:57:47 (none) user.debug kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Jul 20 18:57:47 (none) user.info kernel: init_memory_mapping: 0000000000000000-000000000ffb0000
Jul 20 18:57:47 (none) user.debug kernel:  0000000000 - 0000400000 page 4k
Jul 20 18:57:47 (none) user.debug kernel:  0000400000 - 000fc00000 page 2M
Jul 20 18:57:47 (none) user.debug kernel:  000fc00000 - 000ffb0000 page 4k
Jul 20 18:57:47 (none) user.debug kernel: kernel direct mapping tables up to ffb0000 @ 1bfb000-1c00000
Jul 20 18:57:47 (none) user.info kernel: RAMDISK: 0fca0000 - 0ff8f000
Jul 20 18:57:47 (none) user.warn kernel: ACPI: RSDP 000fab00 00014 (v00 ACPIAM)
Jul 20 18:57:47 (none) user.warn kernel: ACPI: RSDT 0ffb0000 00030 (v01 A M I  OEMRSDT  04000620 MSFT 00000097)
Jul 20 18:57:47 (none) user.warn kernel: ACPI: FACP 0ffb0200 00081 (v01 A M I  OEMFACP  04000620 MSFT 00000097)
Jul 20 18:57:47 (none) user.warn kernel: ACPI: DSDT 0ffb03e0 03641 (v01  A0232 A0232008 00000008 MSFT 0100000D)
Jul 20 18:57:47 (none) user.warn kernel: ACPI: FACS 0ffc0000 00040
Jul 20 18:57:47 (none) user.warn kernel: ACPI: APIC 0ffb0390 0004A (v01 A M I  OEMAPIC  04000620 MSFT 00000097)
Jul 20 18:57:47 (none) user.warn kernel: ACPI: OEMB 0ffc0040 0003F (v01 A M I  OEMBIOS  04000620 MSFT 00000097)
Jul 20 18:57:47 (none) user.debug kernel: ACPI: Local APIC address 0xfee00000
Jul 20 18:57:47 (none) user.notice kernel: 0MB HIGHMEM available.
Jul 20 18:57:47 (none) user.notice kernel: 255MB LOWMEM available.
Jul 20 18:57:47 (none) user.info kernel:   mapped low ram: 0 - 0ffb0000
Jul 20 18:57:47 (none) user.info kernel:   low ram: 0 - 0ffb0000
Jul 20 18:57:47 (none) user.warn kernel: Zone PFN ranges:
Jul 20 18:57:47 (none) user.warn kernel:   DMA      0x00000010 -> 0x00001000
Jul 20 18:57:47 (none) user.warn kernel:   Normal   0x00001000 -> 0x0000ffb0
Jul 20 18:57:47 (none) user.warn kernel:   HighMem  empty
Jul 20 18:57:47 (none) user.warn kernel: Movable zone start PFN for each node
Jul 20 18:57:47 (none) user.warn kernel: early_node_map[2] active PFN ranges
Jul 20 18:57:47 (none) user.warn kernel:     0: 0x00000010 -> 0x0000009f
Jul 20 18:57:47 (none) user.warn kernel:     0: 0x00000100 -> 0x0000ffb0
Jul 20 18:57:47 (none) user.debug kernel: On node 0 totalpages: 65343
Jul 20 18:57:47 (none) user.debug kernel: free_area_init_node: node 0, pgdat c157f240, node_mem_map cfaa0200
Jul 20 18:57:47 (none) user.debug kernel:   DMA zone: 32 pages used for memmap
Jul 20 18:57:47 (none) user.debug kernel:   DMA zone: 0 pages reserved
Jul 20 18:57:47 (none) user.debug kernel:   DMA zone: 3951 pages, LIFO batch:0
Jul 20 18:57:47 (none) user.debug kernel:   Normal zone: 480 pages used for memmap
Jul 20 18:57:47 (none) user.debug kernel:   Normal zone: 60880 pages, LIFO batch:15
Jul 20 18:57:47 (none) user.info kernel: Using APIC driver default
Jul 20 18:57:47 (none) user.info kernel: Detected use of extended apic ids on hypertransport bus
Jul 20 18:57:47 (none) user.info kernel: ACPI: PM-Timer IO Port: 0x808
Jul 20 18:57:47 (none) user.debug kernel: ACPI: Local APIC address 0xfee00000
Jul 20 18:57:47 (none) user.info kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jul 20 18:57:47 (none) user.info kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jul 20 18:57:47 (none) user.info kernel: IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
Jul 20 18:57:47 (none) user.info kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 20 18:57:47 (none) user.debug kernel: ACPI: IRQ0 used by override.
Jul 20 18:57:47 (none) user.debug kernel: ACPI: IRQ2 used by override.
Jul 20 18:57:47 (none) user.debug kernel: ACPI: IRQ9 used by override.
Jul 20 18:57:47 (none) user.info kernel: Using ACPI (MADT) for SMP configuration information
Jul 20 18:57:47 (none) user.info kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs
Jul 20 18:57:47 (none) user.debug kernel: nr_irqs_gsi: 40
Jul 20 18:57:47 (none) user.info kernel: Allocating PCI resources starting at 10000000 (gap: 10000000:ef780000)
Jul 20 18:57:47 (none) user.info kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Jul 20 18:57:47 (none) user.info kernel: PERCPU: Embedded 11 pages/cpu @cf400000 s22272 r0 d22784 u4194304
Jul 20 18:57:47 (none) user.debug kernel: pcpu-alloc: s22272 r0 d22784 u4194304 alloc=1*4194304
Jul 20 18:57:47 (none) user.debug kernel: pcpu-alloc: [0] 0
Jul 20 18:57:47 (none) user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64831
Jul 20 18:57:47 (none) user.notice kernel: Kernel command line: initrd=/boot/initrd dev=LABEL=MLD-3.0.0 vga=0x314 splash=silent quiet apm=off QUIET=1 BOOT_IMAGE=/boot/kernel
Jul 20 18:57:47 (none) user.info kernel: bootsplash: silent mode.
Jul 20 18:57:47 (none) user.info kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jul 20 18:57:47 (none) user.info kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 20 18:57:47 (none) user.info kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 20 18:57:47 (none) user.info kernel: Initializing CPU#0
Jul 20 18:57:47 (none) user.info kernel: Initializing HighMem for node 0 (00000000:00000000)
Jul 20 18:57:47 (none) user.info kernel: Memory: 249364k/261824k available (3923k kernel code, 12008k reserved, 1737k data, 368k init, 0k highmem)
Jul 20 18:57:47 (none) user.info kernel: virtual kernel memory layout:
Jul 20 18:57:47 (none) user.info kernel:     fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
Jul 20 18:57:47 (none) user.info kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jul 20 18:57:47 (none) user.info kernel:     vmalloc : 0xd07b0000 - 0xff7fe000   ( 752 MB)
Jul 20 18:57:47 (none) user.info kernel:     lowmem  : 0xc0000000 - 0xcffb0000   ( 255 MB)
Jul 20 18:57:47 (none) user.info kernel:       .init : 0xc1588000 - 0xc15e4000   ( 368 kB)
Jul 20 18:57:47 (none) user.info kernel:       .data : 0xc13d4cf6 - 0xc1587300   (1737 kB)
Jul 20 18:57:47 (none) user.info kernel:       .text : 0xc1000000 - 0xc13d4cf6   (3923 kB)
Jul 20 18:57:47 (none) user.info kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 20 18:57:47 (none) user.info kernel: Hierarchical RCU implementation.
Jul 20 18:57:47 (none) user.info kernel: NR_IRQS:512
Jul 20 18:57:47 (none) user.debug kernel: CPU 0 irqstacks, hard=cf00a000 soft=cf00c000
Jul 20 18:57:47 (none) user.info kernel: Console: colour dummy device 80x25
Jul 20 18:57:47 (none) user.info kernel: console [tty0] enabled
Jul 20 18:57:47 (none) user.warn kernel: Fast TSC calibration using PIT
Jul 20 18:57:47 (none) user.warn kernel: Detected 1599.825 MHz processor.
Jul 20 18:57:47 (none) user.info kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.65 BogoMIPS (lpj=1599825)
Jul 20 18:57:47 (none) user.info kernel: pid_max: default: 32768 minimum: 301
Jul 20 18:57:47 (none) user.info kernel: Mount-cache hash table entries: 512
Jul 20 18:57:47 (none) user.info kernel: SMP alternatives: switching to UP code
Jul 20 18:57:47 (none) user.info kernel: Freeing SMP alternatives: 20k freed
Jul 20 18:57:47 (none) user.info kernel: ACPI: Core revision 20110413
Jul 20 18:57:47 (none) user.info kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jul 20 18:57:47 (none) user.info kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Jul 20 18:57:47 (none) user.info kernel: CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
Jul 20 18:57:47 (none) user.info kernel: Performance Events: AMD PMU driver.
Jul 20 18:57:47 (none) user.info kernel: ... version:                0
Jul 20 18:57:47 (none) user.info kernel: ... bit width:              48
Jul 20 18:57:47 (none) user.info kernel: ... generic registers:      4
Jul 20 18:57:47 (none) user.info kernel: ... value mask:             0000ffffffffffff
Jul 20 18:57:47 (none) user.info kernel: ... max period:             00007fffffffffff
Jul 20 18:57:47 (none) user.info kernel: ... fixed-purpose events:   0
Jul 20 18:57:47 (none) user.info kernel: ... event mask:             000000000000000f
Jul 20 18:57:47 (none) user.info kernel: Brought up 1 CPUs
Jul 20 18:57:47 (none) user.info kernel: Total of 1 processors activated (3199.65 BogoMIPS).
Jul 20 18:57:47 (none) user.info kernel: NET: Registered protocol family 16
Jul 20 18:57:47 (none) user.debug kernel: node 0 link 0: io port [1000, ffffff]
Jul 20 18:57:47 (none) user.info kernel: TOM: 0000000010000000 aka 256M
Jul 20 18:57:47 (none) user.debug kernel: node 0 link 0: mmio [a0000, bffff]
Jul 20 18:57:47 (none) user.debug kernel: node 0 link 0: mmio [10000000, ffffffff]
Jul 20 18:57:47 (none) user.debug kernel: bus: [00, ff] on node 0 link 0
Jul 20 18:57:47 (none) user.debug kernel: bus: 00 index 0 [io  0x0000-0xffff]
Jul 20 18:57:47 (none) user.debug kernel: bus: 00 index 1 [mem 0x000a0000-0x000bffff]
Jul 20 18:57:47 (none) user.debug kernel: bus: 00 index 2 [mem 0x10000000-0xffffffff]
Jul 20 18:57:47 (none) user.info kernel: ACPI: bus type pci registered
Jul 20 18:57:47 (none) user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
Jul 20 18:57:47 (none) user.info kernel: PCI: Using configuration type 1 for base access
Jul 20 18:57:47 (none) user.info kernel: bio: create slab  at 0
Jul 20 18:57:47 (none) user.debug kernel: ACPI: EC: Look up EC in DSDT
Jul 20 18:57:47 (none) user.warn kernel: ACPI: Executed 1 blocks of module-level executable AML code
Jul 20 18:57:47 (none) user.info kernel: ACPI: Interpreter enabled
Jul 20 18:57:47 (none) user.info kernel: ACPI: (supports S0 S1 S3 S5)
Jul 20 18:57:47 (none) user.info kernel: ACPI: Using IOAPIC for interrupt routing
Jul 20 18:57:47 (none) user.info kernel: ACPI: No dock devices found.
Jul 20 18:57:47 (none) user.info kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jul 20 18:57:47 (none) user.debug kernel: pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
Jul 20 18:57:47 (none) user.debug kernel: pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
Jul 20 18:57:47 (none) user.debug kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Jul 20 18:57:47 (none) user.debug kernel: pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffffffff] (ignored)
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.0: [1106:0282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.0: reg 10: [mem 0xdc000000-0xdfffffff pref]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.1: [1106:1282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.2: [1106:2282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.3: [1106:3282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.4: [1106:4282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:00.7: [1106:7282] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0: supports D1
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0c.0: [13f6:0111] type 0 class 0x000401
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0c.0: reg 10: [io  0xe800-0xe8ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0c.0: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0e.0: [1131:7146] type 0 class 0x000480
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0e.0: reg 10: [mem 0xf9e00000-0xf9e001ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 10: [io  0xe400-0xe407]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 14: [io  0xe000-0xe003]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 18: [io  0xd800-0xd807]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 1c: [io  0xd400-0xd403]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 20: [io  0xd000-0xd00f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.0: reg 24: [io  0xc800-0xc8ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.0: reg 20: [io  0xb400-0xb41f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.0: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.0: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.1: reg 20: [io  0xb800-0xb81f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.1: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.1: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.2: reg 20: [io  0xc000-0xc01f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.2: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.2: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.3: reg 20: [io  0xc400-0xc41f]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.3: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.3: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.4: reg 10: [mem 0xf9c00000-0xf9c000ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.4: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:10.4: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
Jul 20 18:57:47 (none) user.info kernel: HPET not enabled in BIOS. You might try hpet=force boot option
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.5: reg 10: [io  0x1000-0x10ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.5: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:11.6: reg 10: [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: reg 10: [io  0xb000-0xb0ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: reg 14: [mem 0xf9b00000-0xf9b000ff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: supports D1 D2
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:12.0: PME# disabled
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
Jul 20 18:57:47 (none) user.debug kernel: PCI: peer root bus 00 res updated from pci conf
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: [10de:00f1] type 0 class 0x000300
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: reg 18: [mem 0xfa000000-0xfaffffff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0xf9f00000-0xf9f1ffff pref]
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:00: on NUMA node 0
Jul 20 18:57:47 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Jul 20 18:57:47 (none) user.info kernel:  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e)
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15)
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Jul 20 18:57:47 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Jul 20 18:57:47 (none) user.info kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jul 20 18:57:47 (none) user.info kernel: vgaarb: loaded
Jul 20 18:57:47 (none) user.info kernel: vgaarb: bridge control possible 0000:01:00.0
Jul 20 18:57:47 (none) user.notice kernel: SCSI subsystem initialized
Jul 20 18:57:47 (none) user.debug kernel: libata version 3.00 loaded.
Jul 20 18:57:47 (none) user.info kernel: usbcore: registered new interface driver usbfs
Jul 20 18:57:47 (none) user.info kernel: usbcore: registered new interface driver hub
Jul 20 18:57:47 (none) user.info kernel: usbcore: registered new device driver usb
Jul 20 18:57:47 (none) user.info kernel: PCI: Using ACPI for IRQ routing
Jul 20 18:57:47 (none) user.debug kernel: PCI: pci_cache_line_size set to 64 bytes
Jul 20 18:57:47 (none) user.debug kernel: reserve RAM buffer: 000000000009fc00 - 000000000009ffff
Jul 20 18:57:47 (none) user.debug kernel: reserve RAM buffer: 000000000ffb0000 - 000000000fffffff
Jul 20 18:57:47 (none) user.info kernel: pnp: PnP ACPI init
Jul 20 18:57:47 (none) user.info kernel: ACPI: bus type pnp registered
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [bus 00-ff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [io  0x0cf8-0x0cff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [io  0x0000-0x0cf7 window]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [io  0x0d00-0xffff window]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [mem 0x00000000 window]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: [mem 0x10000000-0xffffffff window]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [dma 4]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x0000-0x000f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x0081-0x0083]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x0087]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x0089-0x008b]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x008f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: [io  0x00c0-0x00df]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:02: [io  0x0070-0x0071]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:02: [irq 8]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:03: [io  0x0060]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:03: [io  0x0064]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:03: [irq 1]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:04: [io  0x0061]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:05: [io  0x00f0-0x00ff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:05: [irq 13]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:06: [irq 6]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:06: [dma 2]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:06: [io  0x03f0-0x03f5]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:06: [io  0x03f7]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:07: [io  0x0378-0x037f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:07: [io  0x0778-0x077b]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:07: [irq 7]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:07: [dma 3]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:08: [io  0x0000-0xffffffff disabled]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:08: [io  0x0000-0xffffffff disabled]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:08: [io  0x0290-0x0297]
Jul 20 18:57:47 (none) user.info kernel: system 00:08: [io  0x0290-0x0297] has been reserved
Jul 20 18:57:47 (none) user.debug kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0010-0x001f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0022-0x003f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0044-0x005f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0062-0x0063]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0065-0x006f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0072-0x007f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0080]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0084-0x0086]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0088]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x008c-0x008e]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0090-0x009f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x00a2-0x00bf]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x00e0-0x00ef]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x03e1-0x03e7]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x04d0-0x04d1]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0800-0x087f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0400-0x041f]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:09: [io  0x0000-0xffffffff disabled]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0080] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0088] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.warn kernel: pnp 00:09: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
Jul 20 18:57:47 (none) user.info kernel: system 00:09: [io  0x03e1-0x03e7] has been reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:09: [io  0x04d0-0x04d1] has been reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:09: [io  0x0800-0x087f] has been reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:09: [io  0x0400-0x041f] has been reserved
Jul 20 18:57:47 (none) user.debug kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0a: [mem 0xfec00000-0xfec00fff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0a: [mem 0xfee00000-0xfee00fff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0a: [mem 0xfff80000-0xffffffff]
Jul 20 18:57:47 (none) user.info kernel: system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:0a: [mem 0xfff80000-0xffffffff] has been reserved
Jul 20 18:57:47 (none) user.debug kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0b: [io  0x03f8-0x03ff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0b: [irq 4]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0c: [mem 0x00000000-0x0009ffff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0c: [mem 0x000c0000-0x000dffff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0c: [mem 0x000e0000-0x000fffff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0c: [mem 0x00100000-0x0ffeffff]
Jul 20 18:57:47 (none) user.debug kernel: pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
Jul 20 18:57:47 (none) user.info kernel: system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
Jul 20 18:57:47 (none) user.info kernel: system 00:0c: [mem 0x00100000-0x0ffeffff] could not be reserved
Jul 20 18:57:47 (none) user.debug kernel: system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Jul 20 18:57:47 (none) user.info kernel: pnp: PnP ACPI: found 13 devices
Jul 20 18:57:47 (none) user.info kernel: ACPI: ACPI bus type pnp unregistered
Jul 20 18:57:47 (none) user.info kernel: Switching to clocksource acpi_pm
Jul 20 18:57:47 (none) user.debug kernel: PCI: max bus depth: 1 pci_try_num: 2
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:11.6: BAR 0: assigned [io  0x1400-0x14ff]
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:11.6: BAR 0: set to [io  0x1400-0x14ff] (PCI address [0x1400-0x14ff])
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0:   bridge window [io  disabled]
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:00:01.0: setting latency timer to 64
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:00: resource 6 [mem 0x10000000-0xffffffff]
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfbffffff]
Jul 20 18:57:47 (none) user.debug kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf8ffffff pref]
Jul 20 18:57:47 (none) user.info kernel: NET: Registered protocol family 2
Jul 20 18:57:47 (none) user.info kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 20 18:57:47 (none) user.info kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jul 20 18:57:47 (none) user.info kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jul 20 18:57:47 (none) user.info kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jul 20 18:57:47 (none) user.info kernel: TCP reno registered
Jul 20 18:57:47 (none) user.info kernel: UDP hash table entries: 128 (order: 0, 4096 bytes)
Jul 20 18:57:47 (none) user.info kernel: UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
Jul 20 18:57:47 (none) user.info kernel: NET: Registered protocol family 1
Jul 20 18:57:47 (none) user.info kernel: RPC: Registered named UNIX socket transport module.
Jul 20 18:57:47 (none) user.info kernel: RPC: Registered udp transport module.
Jul 20 18:57:47 (none) user.info kernel: RPC: Registered tcp transport module.
Jul 20 18:57:47 (none) user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Jul 20 18:57:47 (none) user.debug kernel: pci 0000:01:00.0: Boot video device
Jul 20 18:57:47 (none) user.debug kernel: PCI: CLS 64 bytes, default 64
Jul 20 18:57:47 (none) user.info kernel: Trying to unpack rootfs image as initramfs...
Jul 20 18:57:47 (none) user.info kernel: Freeing initrd memory: 3004k freed
Jul 20 18:57:47 (none) user.info kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jul 20 18:57:47 (none) user.notice kernel: VFS: Disk quotas dquot_6.5.2
Jul 20 18:57:47 (none) user.warn kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 20 18:57:47 (none) user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jul 20 18:57:47 (none) user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul 20 18:57:47 (none) user.info kernel: NTFS driver 2.1.30 [Flags: R/W].
Jul 20 18:57:47 (none) user.info kernel: SGI XFS with security attributes, large block/inode numbers, no debug enabled
Jul 20 18:57:47 (none) user.info kernel: aufs 2.1-standalone.tree-3.0-rcN-20110718
Jul 20 18:57:47 (none) user.info kernel: msgmni has been set to 492
Jul 20 18:57:47 (none) user.info kernel: io scheduler noop registered
Jul 20 18:57:47 (none) user.info kernel: io scheduler deadline registered
Jul 20 18:57:47 (none) user.info kernel: io scheduler cfq registered (default)
Jul 20 18:57:47 (none) user.info kernel: vesafb: mode is 800x600x16, linelength=1600, pages=2
Jul 20 18:57:47 (none) user.info kernel: vesafb: protected mode interface info at c000:d510
Jul 20 18:57:47 (none) user.info kernel: vesafb: pmi: set display start = c00cd546, set palette = c00cd5b0
Jul 20 18:57:47 (none) user.info kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Jul 20 18:57:47 (none) user.info kernel: vesafb: scrolling: redraw
Jul 20 18:57:47 (none) user.info kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jul 20 18:57:47 (none) user.info kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xd0800000, using 3750k, total 131072k
Jul 20 18:57:47 (none) user.info kernel: bootsplash 3.1.6-2004/03/31: looking for picture...
Jul 20 18:57:47 (none) user.info kernel:  silentjpeg size 11877 bytes,
Jul 20 18:57:47 (none) user.info kernel: ...found (800x600, 9190 bytes, v3).
Jul 20 18:57:47 (none) user.info kernel: Console: switching to colour frame buffer device 93x28
Jul 20 18:57:47 (none) user.info kernel: fb0: VESA VGA frame buffer device
Jul 20 18:57:47 (none) user.info kernel: Refined TSC clocksource calibration: 1600.056 MHz.
Jul 20 18:57:47 (none) user.info kernel: Switching to clocksource tsc
Jul 20 18:57:47 (none) user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jul 20 18:57:47 (none) user.info kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 20 18:57:47 (none) user.info kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 20 18:57:47 (none) user.warn kernel: Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Jul 20 18:57:47 (none) user.warn kernel: Hangcheck: Using getrawmonotonic().
Jul 20 18:57:47 (none) user.info kernel: Floppy drive(s): fd0 is 1.44M
Jul 20 18:57:47 (none) user.info kernel: FDC 0 is a post-1991 82077
Jul 20 18:57:47 (none) user.info kernel: brd: module loaded
Jul 20 18:57:47 (none) user.info kernel: loop: module loaded
Jul 20 18:57:47 (none) user.info kernel: Uniform Multi-Platform E-IDE driver
Jul 20 18:57:47 (none) user.info kernel: via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
Jul 20 18:57:47 (none) user.info kernel: via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
Jul 20 18:57:47 (none) user.info kernel: pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jul 20 18:57:47 (none) user.info kernel: via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
Jul 20 18:57:47 (none) user.info kernel:     ide0: BM-DMA at 0xfc00-0xfc07
Jul 20 18:57:47 (none) user.info kernel:     ide1: BM-DMA at 0xfc08-0xfc0f
Jul 20 18:57:47 (none) user.debug kernel: Probing IDE interface ide0...
Jul 20 18:57:47 (none) user.debug kernel: Probing IDE interface ide1...
Jul 20 18:57:47 (none) user.info kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 20 18:57:47 (none) user.info kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jul 20 18:57:47 (none) user.info kernel: ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Jul 20 18:57:47 (none) user.info kernel: ide-gd driver 1.18
Jul 20 18:57:47 (none) user.info kernel: ide-cd driver 5.00
Jul 20 18:57:47 (none) user.warn kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
Jul 20 18:57:47 (none) user.debug kernel: sata_via 0000:00:0f.0: version 2.6
Jul 20 18:57:47 (none) user.info kernel: sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Jul 20 18:57:47 (none) user.info kernel: sata_via 0000:00:0f.0: routed to hard irq line 10
Jul 20 18:57:47 (none) user.info kernel: scsi0 : sata_via
Jul 20 18:57:47 (none) user.info kernel: scsi1 : sata_via
Jul 20 18:57:47 (none) user.info kernel: ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
Jul 20 18:57:47 (none) user.info kernel: ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9c00000
Jul 20 18:57:47 (none) user.info kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
Jul 20 18:57:47 (none) user.info kernel: hub 1-0:1.0: USB hub found
Jul 20 18:57:47 (none) user.info kernel: hub 1-0:1.0: 8 ports detected
Jul 20 18:57:47 (none) user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
Jul 20 18:57:47 (none) user.info kernel: hub 2-0:1.0: USB hub found
Jul 20 18:57:47 (none) user.info kernel: hub 2-0:1.0: 2 ports detected
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
Jul 20 18:57:47 (none) user.info kernel: hub 3-0:1.0: USB hub found
Jul 20 18:57:47 (none) user.info kernel: hub 3-0:1.0: 2 ports detected
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
Jul 20 18:57:47 (none) user.info kernel: hub 4-0:1.0: USB hub found
Jul 20 18:57:47 (none) user.info kernel: hub 4-0:1.0: 2 ports detected
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jul 20 18:57:47 (none) user.info kernel: uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
Jul 20 18:57:47 (none) user.info kernel: hub 5-0:1.0: USB hub found
Jul 20 18:57:47 (none) user.info kernel: hub 5-0:1.0: 2 ports detected
Jul 20 18:57:47 (none) user.info kernel: Initializing USB Mass Storage driver...
Jul 20 18:57:47 (none) user.info kernel: usbcore: registered new interface driver usb-storage
Jul 20 18:57:47 (none) user.info kernel: USB Mass Storage support registered.
Jul 20 18:57:47 (none) user.info kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jul 20 18:57:47 (none) user.warn kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jul 20 18:57:47 (none) user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 20 18:57:47 (none) user.info kernel: mousedev: PS/2 mouse device common for all mice
Jul 20 18:57:47 (none) user.info kernel: I2O subsystem v1.325
Jul 20 18:57:47 (none) user.info kernel: i2o: max drivers = 8
Jul 20 18:57:47 (none) user.info kernel: rtc_cmos 00:02: RTC can wake from S4
Jul 20 18:57:47 (none) user.info kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jul 20 18:57:47 (none) user.info kernel: rtc0: alarms up to one year, y3k, 114 bytes nvram
Jul 20 18:57:47 (none) user.info kernel: cpuidle: using governor ladder
Jul 20 18:57:47 (none) user.info kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jul 20 18:57:47 (none) user.info kernel: usbcore: registered new interface driver usbhid
Jul 20 18:57:47 (none) user.info kernel: usbhid: USB HID core driver
Jul 20 18:57:47 (none) user.info kernel: TCP cubic registered
Jul 20 18:57:47 (none) user.info kernel: NET: Registered protocol family 10
Jul 20 18:57:47 (none) user.info kernel: IPv6 over IPv4 tunneling driver
Jul 20 18:57:47 (none) user.info kernel: NET: Registered protocol family 17
Jul 20 18:57:47 (none) user.info kernel: Using IPI No-Shortcut mode
Jul 20 18:57:47 (none) user.info kernel: rtc_cmos 00:02: setting system clock to 2011-07-20 18:57:45 UTC (1311188265)
Jul 20 18:57:47 (none) user.info kernel: ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jul 20 18:57:47 (none) user.info kernel: usb 1-2: new high speed USB device number 2 using ehci_hcd
Jul 20 18:57:47 (none) user.info kernel: ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jul 20 18:57:47 (none) user.info kernel: Freeing unused kernel memory: 368k freed
Jul 20 18:57:47 (none) user.info kernel: scsi2 : usb-storage 1-2:1.0
Jul 20 18:57:47 (none) user.info kernel: usb 3-1: new full speed USB device number 2 using uhci_hcd
Jul 20 18:57:
« Last Edit: July 20, 2011, 20:44:01 by niesen »
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #24 on: July 20, 2011, 23:26:46 »
Das Problem mit der CMI8738 kannst Du eventuell dadurch löschen, das Du den benötigten Treiber fest einstellst.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #25 on: July 21, 2011, 00:16:33 »
Ok, und Hoffnungen für den Onboard-Murks?
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #26 on: July 21, 2011, 10:30:58 »
Ne, bei der Onbordkarte habe ich keine Idee wo dran es harkt.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #27 on: July 26, 2011, 21:53:50 »
die var/log/sysinit

Found hardware: "VIA8237" "Analog Devices AD1888" "AC97a:41445368" "0x1043" "0x810d"
Hardware is initialized using a generic method
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!
amixer: Invalid command!

Vielleicht hilft das weiter.?
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20424
    • View Profile
    • ClausMuus.de
Soundprobleme
« Reply #28 on: July 27, 2011, 10:59:38 »
Ne, die "amixer: Invalid command!" sind normal. Das liegt an der Art wie ich die Mixer Regler initialisiere. Die werden bisher nur nicht unterdrückt, um nicht auch eventuell interessante Fehlermeldungen weg zu werfen.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline niesen

  • Adv. Member
  • ***
  • Posts: 141
    • View Profile
Soundprobleme
« Reply #29 on: July 27, 2011, 11:28:30 »
Wie kann ich den Sound deaktivieren, stop sound geht nicht, ich wil das mal probieren: http://wiki.sabayon.org/index.php?title=HO...tel_Sound_Cards
Logged
MLD 3 - T-Bred B Core Geode - 1GB - 1x 7134 DVB-S, 2x 7146 DVB-S (nicht im Einsatz)

1 [2] 3 >>> Archiv / MLD 3.x / Development / Soundprobleme
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.