[1] Archiv / MLD 3.x / Development / Kleinigkeiten In Letzter Zeit
 

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« on: February 08, 2012, 10:49:56 »
hi claus,

es gibt paar kleinigkeiten die NEU sind und mich doch ein wenig stören :-)

Code: [Select]
Loading sound driver:
done
sh: -0: unknown operand
alsactl: load_state:1586: Cannot open /etc/asound.state for reading: No such file or directory
Found hardware: "HDA-Intel" "Realtek ALC888" "HDA:10ec0888,1458a002,00100001" "0x1458" "0xa002"
Hardware is initialized using a generic method
Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100100" "0x10b0" "0x1401"

seitdem du glaube ich sound laden NACH xorg gemacht hast (oder sowas) -> taucht das in den logs auf und ich habe NIE sound bevor ich ihn entmute (früher musste ich meinen sound nie entmuten :-(  -> optical)

2. manuelle installation über OSD funktioniert nicht:
man muss alles mit ENTER bestätigen und vllt bricht man damit irgendeinen vorgang im hintergrund ab
eisntellungen:
sda 320gb
10gb
auto
auto
format
format
copysystemdisk
bootblockdisk: auto

über webif keine probleme -> osd ganze vdr bedienung ist weg und schwrazes bild.

alt f1 und vi /var/log/install.log geben keine anzeichen?!

3. ab und an startet xorg nicht. das kann 1 /100 auftretten ist dann aber trotzdem sehr nervig vorallem wenn die freundin davor hockt und nicht weiss das ein startx ihr hilft :-)
-> watchdog?

mehr fällt mir erstmal nicht ein :-) bin grade am aufsetzen des nagelneuen isos und die 3 puntke sind mir grade alle aufeinmal passiert :-) glückstag heute :-)

4. gab es einen grund wieso die einstellung der kanallsite (wenn man beim ersten start verbose -> auswahl -> install) nicht übernommen wird bei ner install und man nochmal verbose starten muss?
« Last Edit: February 08, 2012, 10:56:14 by MarMic »
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #1 on: February 08, 2012, 11:00:48 »
Quote
2. manuelle installation über OSD funktioniert nicht:
man muss alles mit ENTER bestätigen und vllt bricht man damit irgendeinen vorgang im hintergrund ab
eisntellungen:
sda 320gb
10gb
auto
auto
format
format
copysystemdisk
bootblockdisk: auto


Hi

Also bei mir hat das ganze gerade mit nem 1 GB Stick und den Einstellungen über das OSD funktioniert(ISO über VM gebootet):

sda 1gb
1gb
sda 1gb
sda 1gb
format
format
copysystemdisk
bootblockdisk: sda 1gb

Gruß
MegaX
Gruß MegaX

Hardware (show / hide)

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #2 on: February 08, 2012, 11:06:04 »
hi megax,

ich denke es wird einfach ein timing problem sein -> man drückt zur falschen zeit enter oder sowas...

na mal schauen ob claus ne idee hat :-)

p.s. danke für diene rückmeldung!

greetz MarMic
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #3 on: February 08, 2012, 11:43:25 »
so neuer thread weil nicht mehr so klein :-)

Code: [Select]
# Count of DVB adapters
VDR_DVB_ADAPTER_COUNT="1"

hmm claus, es kommt zwar neues dvb gerät gefundne vdr neu starten?

ich mache da nichts weil grade ne aufnahme läuft (testzwecke)

naher reboot UND weiterhin count=1?!

das wird irgendwie nicht zuverlässig eingetragen :-(

das ist mir schon beim ersten mal aufgefallen aber nach nem reboot war es dann da. diesmal habe ich aber schon 10 reboot hinter mit?!

greetz MarMic

edit://
poweroff
poweron
mit glück waren beide adapter da und vdr startet -> beide da
ABER WEITERHIN: # Count of DVB adapters
VDR_DVB_ADAPTER_COUNT="1"

grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
« Last Edit: February 08, 2012, 11:48:24 by MarMic »
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Kleinigkeiten In Letzter Zeit
« Reply #4 on: February 08, 2012, 20:43:51 »
Der Count wird nur hoch gesetzt wenn die Karten beim booten bereits alle dabei waren, oder Du die Frage mit OK bestätigst. Sollte das nicht der Fall sein, läuft da was schief. Gesetzt wird das in der runvdr direkt vor dem Starten des VDR.
Was liefert denn bei Dir nen
ls -d /dev/dvb/adapter? 2>/dev/null | wc -l

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Kleinigkeiten In Letzter Zeit
« Reply #5 on: February 08, 2012, 20:51:00 »
Ich hab den Fehler im alsa Init Script gefunden. Da war nen Tippfehler drinn. Eine 0 anstelle eines o.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #6 on: February 08, 2012, 20:52:04 »
@claus, ja das macht ja dann keinen sinn

das count sollte 1minute nach dem vdr up ist neu berechnet werden udn eingetragen werden. nach einer minute ist spätestens der empfänger da (es gibt auch akrten die brauchen 30sec bis die fw drüben ist usw usw

greetz MarMic
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Kleinigkeiten In Letzter Zeit
« Reply #7 on: February 08, 2012, 20:57:03 »
Xorg hat bereits nen "watchdog". OK, nicht ganz, aber es wird immer wieder neu gestartet wenn es abstürzen sollte.
Hast Du nen Vorschlag wo drauf nen echter Watchdog prüfen soll? Gibt's da eventuell bereits ne Lösung für? Fehlt z.B. der X Prozess wenn xorg nicht gestartet wurde, der startx prozess ist jedoch vorhanden? Also irgendwas in der Prozessliste wo dran dieser Fehlstart erkannt werden kann? Ich hatte so was bisher noch nicht.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Kleinigkeiten In Letzter Zeit
« Reply #8 on: February 08, 2012, 20:59:04 »
Beim OSD Installieren könnte man die einzelnen Nachfragen weg lassen, und nur am Anfang der Installation einmalig nachfragen. Was haltet Ihr davon?

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #9 on: February 08, 2012, 21:05:00 »
wegen watchdog: ka ich schau nächstes mal wenn das passiert was ps ausgibt

wegen osd: ja nur einmal abfragen und dann schau ma mal weiter
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #10 on: February 08, 2012, 21:22:39 »
@claus,

hier grade in der vm funktioniert auch kein reboot nach der install

reboot? -> ENTER

passiert gar nichts
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Kleinigkeiten In Letzter Zeit
« Reply #11 on: February 08, 2012, 22:38:30 »
Es kommt vor, dass sich vdr-sxfe nicht beendet und dadurch nen reboot verhindert. Nach nem drücken von ESC im vdr Fenster sollte der reboot fortgesetzt werden.
Hast Du mal getestet ob nen poweoff besser geht?

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #12 on: February 08, 2012, 22:46:51 »
ne poweroff habe ich da nicht getestet aber nen reboot in tty1 tut 1a!
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #13 on: February 09, 2012, 10:22:45 »
hi claus,

wegen xorg:

Code: [Select]
MLD> ps
  PID USER       VSZ STAT COMMAND
    1 root      2556 S    init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW   [kworker/u:0]
    6 root         0 SW   [migration/0]
    7 root         0 SW   [migration/1]
    8 root         0 SW   [kworker/1:0]
    9 root         0 SW   [ksoftirqd/1]
   10 root         0 SW   [kworker/0:1]
   11 root         0 SW<  [khelper]
   12 root         0 SW   [kworker/u:1]
  209 root         0 SW   [sync_supers]
  211 root         0 SW   [bdi-default]
  212 root         0 SW<  [kblockd]
  319 root         0 SW<  [ata_sff]
  327 root         0 SW   [khubd]
  486 root         0 SW   [kswapd0]
  487 root         0 SW   [fsnotify_mark]
  489 root         0 SW<  [xfs_mru_cache]
  491 root         0 SW<  [xfslogd]
  492 root         0 SW<  [xfsdatad]
  493 root         0 SW<  [xfsconvertd]
 1105 root         0 SW   [kworker/1:1]
 1796 root         0 SW   [scsi_eh_0]
 1801 root         0 SW   [scsi_eh_1]
 1806 root         0 SW   [kworker/u:2]
 1809 root         0 SW   [kworker/u:3]
 1937 root         0 SW   [kworker/1:2]
 2032 root         0 SW<  [kpsmoused]
 2034 root         0 SW   [kworker/0:2]
 2038 root         0 SW<  [exec-osm]
 2422 root      2556 S    klogd -c 1
 2453 root         0 SW   [scsi_eh_2]
 2455 root         0 SW   [usb-storage]
 2585 root         0 SW   [jbd2/sda1-8]
 2586 root         0 SW<  [ext4-dio-unwrit]
 2619 root      2556 S    syslogd -m 0
 2656 root         0 SW<  [loop0]
 2687 root         0 SW<  [loop1]
 2700 root         0 SW<  [loop2]
 2728 root         0 SW<  [loop3]
 2742 root         0 SW<  [loop4]
 2755 root         0 SW<  [loop5]
 2770 root         0 SW<  [loop6]
 2787 root         0 SW<  [loop7]
 2804 root         0 SW<  [loop8]
 2820 root         0 SW<  [loop9]
 2837 root         0 SW<  [loop10]
 2855 root         0 SW<  [loop11]
 2872 root         0 SW<  [loop12]
 2889 root         0 SW<  [loop13]
 2905 root         0 SW<  [loop14]
 2923 root         0 SW<  [loop15]
 2939 root         0 SW<  [loop16]
 2956 root         0 SW<  [loop17]
 2973 root         0 SW<  [loop18]
 2990 root         0 SW<  [loop19]
 3008 root         0 SW<  [loop20]
 3025 root         0 SW<  [loop21]
 3042 root         0 SW<  [loop22]
 3058 root         0 SW<  [loop23]
 3075 root         0 SW<  [loop24]
 3093 root         0 SW<  [loop25]
 3110 root         0 SW<  [loop26]
 3127 root         0 SW<  [loop27]
 3143 root         0 SW<  [loop28]
 3161 root         0 SW<  [loop29]
 3178 root         0 SW<  [loop30]
 3195 root         0 SW<  [loop31]
 3212 root         0 SW<  [loop32]
 3229 root         0 SW<  [loop33]
 3245 root         0 SW<  [loop34]
 3262 root         0 SW<  [loop35]
 3280 root         0 SW<  [loop36]
 3296 root         0 SW<  [loop37]
 3313 root         0 SW<  [loop38]
 3331 root         0 SW<  [loop39]
 3347 root         0 SW<  [loop40]
 3364 root         0 SW<  [loop41]
 3382 root         0 SW<  [loop42]
 3399 root         0 SW   [flush-8:0]
 3421 root         0 SW   [xfsbufd/sda2]
 3422 root         0 SW   [xfsaild/sda2]
 4244 root      3528 S    lircd
 4542 nobody    2336 S    LCDd
 4660 root      3992 S    udhcpc -b -H MLD -p /var/run/udhcpc.pid
 4719 root      3992 S    udhcpc -b -H MLD -p /var/run/udhcpc.pid
 5121 root         0 SW<  [hd-audio0]
 5150 root         0 SW<  [hd-audio1]
 5228 root      4124 S    {runvdr} /bin/sh /usr/bin/runvdr
 5853 root      332m S    /usr/bin/vdr -s /etc/vdr/shutdown.d/rc.action -r /et
 5862 root         0 SW   [kdvb-ad-0-fe-0]
 5865 root         0 SW   [kdvb-ad-1-fe-0]
 6118 root      2428 S    sshd -E
 6125 root      2048 S    tcpsvd -l0 0 80 /bin/sh /usr/bin/webserver.sh show
 6126 root      3996 S    logger -t tcpsvd
 6136 root     11692 S    nmbd -D
 6141 root      1980 S    acpid
 6230 root     19492 S    smbd -D
 6242 root     19492 S    smbd -D
14888 root      4128 S    -sh
14890 root      4128 S    -sh
14894 root      4128 S    -sh
14903 root      4128 S    -sh
14921 root      2788 R    sshd -E
14922 root      4128 S    -sh
14931 root      4032 R    ps

nach nem update_all hatte ich das eben schon wieder! dahcte jetzt grr busybox crasht -> aber start xorg TUT!

greetz MarMic
 so nach start xorg
Code: [Select]
MLD> ps
  PID USER       VSZ STAT COMMAND
    1 root      2556 S    init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    5 root         0 SW   [kworker/u:0]
    6 root         0 SW   [migration/0]
    7 root         0 SW   [migration/1]
    8 root         0 SW   [kworker/1:0]
    9 root         0 SW   [ksoftirqd/1]
   10 root         0 SW   [kworker/0:1]
   11 root         0 SW<  [khelper]
   12 root         0 SW   [kworker/u:1]
  209 root         0 SW   [sync_supers]
  211 root         0 SW   [bdi-default]
  212 root         0 SW<  [kblockd]
  319 root         0 SW<  [ata_sff]
  327 root         0 SW   [khubd]
  486 root         0 SW   [kswapd0]
  487 root         0 SW   [fsnotify_mark]
  489 root         0 SW<  [xfs_mru_cache]
  491 root         0 SW<  [xfslogd]
  492 root         0 SW<  [xfsdatad]
  493 root         0 SW<  [xfsconvertd]
 1105 root         0 SW   [kworker/1:1]
 1796 root         0 SW   [scsi_eh_0]
 1801 root         0 SW   [scsi_eh_1]
 1937 root         0 SW   [kworker/1:2]
 2032 root         0 SW<  [kpsmoused]
 2034 root         0 SW   [kworker/0:2]
 2038 root         0 SW<  [exec-osm]
 2422 root      2556 S    klogd -c 1
 2453 root         0 SW   [scsi_eh_2]
 2455 root         0 SW   [usb-storage]
 2585 root         0 SW   [jbd2/sda1-8]
 2586 root         0 SW<  [ext4-dio-unwrit]
 2619 root      2556 S    syslogd -m 0
 2656 root         0 SW<  [loop0]
 2687 root         0 SW<  [loop1]
 2700 root         0 SW<  [loop2]
 2728 root         0 SW<  [loop3]
 2742 root         0 SW<  [loop4]
 2755 root         0 SW<  [loop5]
 2770 root         0 SW<  [loop6]
 2787 root         0 SW<  [loop7]
 2804 root         0 SW<  [loop8]
 2820 root         0 SW<  [loop9]
 2837 root         0 SW<  [loop10]
 2855 root         0 SW<  [loop11]
 2872 root         0 SW<  [loop12]
 2889 root         0 SW<  [loop13]
 2905 root         0 SW<  [loop14]
 2923 root         0 SW<  [loop15]
 2939 root         0 SW<  [loop16]
 2956 root         0 SW<  [loop17]
 2973 root         0 SW<  [loop18]
 2990 root         0 SW<  [loop19]
 3008 root         0 SW<  [loop20]
 3025 root         0 SW<  [loop21]
 3042 root         0 SW<  [loop22]
 3058 root         0 SW<  [loop23]
 3075 root         0 SW<  [loop24]
 3093 root         0 SW<  [loop25]
 3110 root         0 SW<  [loop26]
 3127 root         0 SW<  [loop27]
 3143 root         0 SW<  [loop28]
 3161 root         0 SW<  [loop29]
 3178 root         0 SW<  [loop30]
 3195 root         0 SW<  [loop31]
 3212 root         0 SW<  [loop32]
 3229 root         0 SW<  [loop33]
 3245 root         0 SW<  [loop34]
 3262 root         0 SW<  [loop35]
 3280 root         0 SW<  [loop36]
 3296 root         0 SW<  [loop37]
 3313 root         0 SW<  [loop38]
 3331 root         0 SW<  [loop39]
 3347 root         0 SW<  [loop40]
 3364 root         0 SW<  [loop41]
 3382 root         0 SW<  [loop42]
 3399 root         0 SW   [flush-8:0]
 3421 root         0 SW   [xfsbufd/sda2]
 3422 root         0 SW   [xfsaild/sda2]
 4244 root      3528 S    lircd
 4542 nobody    2336 S    LCDd
 4660 root      3992 S    udhcpc -b -H MLD -p /var/run/udhcpc.pid
 4719 root      3992 S    udhcpc -b -H MLD -p /var/run/udhcpc.pid
 5121 root         0 SW<  [hd-audio0]
 5150 root         0 SW<  [hd-audio1]
 5228 root      4124 S    {runvdr} /bin/sh /usr/bin/runvdr
 5853 root      334m S    /usr/bin/vdr -s /etc/vdr/shutdown.d/rc.action -r /et
 5862 root         0 SW   [kdvb-ad-0-fe-0]
 5865 root         0 SW   [kdvb-ad-1-fe-0]
 6118 root      2428 S    sshd -E
 6125 root      2048 S    tcpsvd -l0 0 80 /bin/sh /usr/bin/webserver.sh show
 6126 root      3996 S    logger -t tcpsvd
 6136 root     11692 S    nmbd -D
 6141 root      1980 S    acpid
 6230 root     19492 S    smbd -D
 6242 root     19492 S    smbd -D
14888 root      4128 S    -sh
14890 root      4128 S    -sh
14894 root      4128 S    -sh
14903 root      4128 S    -sh
14921 root      2788 R    sshd -E
14922 root      4128 S    -sh
15201 root      4124 S    {runx} /bin/sh /usr/bin/runx
15223 root      4124 S    {startx} /bin/sh /usr/bin/startx
15233 root      3380 S    xinit /usr/bin/icewm-session-lite -- -ardelay 250 -a
15234 root     59380 S <  {Xorg} X :0 -ardelay 250 -arinterval 30 vt7
15236 root         0 SW   [kworker/1:3]
15259 root      7560 S    /usr/bin/icewm-session-lite
15260 root     10448 S N  icewmbg-lite
15261 root     12340 S    icewm-lite
15262 root     11660 S    icewmtray-lite
15278 root      4124 S    {poswindows} /bin/sh /usr/bin/poswindows
15285 root      3376 S    monitor
15286 root      4124 S    {poswindows} /bin/sh /usr/bin/poswindows
15310 root      4124 S    {startup} /bin/sh /etc/X11/icewm/startup
15314 root      4124 S    {runvdr-sxfe} /bin/sh /usr/bin/runvdr-sxfe -f
15332 root      161m S    /usr/bin/vdr-sxfe --fullscreen --lirc --reconnect xv
15462 root      4032 R    ps
« Last Edit: February 09, 2012, 10:26:25 by MarMic »
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Kleinigkeiten In Letzter Zeit
« Reply #14 on: February 09, 2012, 14:36:55 »
so bin heim gefahren an meienn vga2scart vdr:

manuelle install per osd:

sobald man format sda2 mit ENTER bestätigt KILL!
Code: [Select]
Feb  9 13:32:30 (none) user.info kernel:  sda: sda1 sda2
Feb  9 13:32:30 (none) user.info kernel:  sda: sda1 sda2
Feb  9 13:32:42 (none) user.info kernel: vdr[11367]: segfault at 0 ip 08113e85 sp bfaa49c0 error 4 in vdr[8048000+14c000]
Feb  9 13:33:08 (none) user.warn kernel: aufs test_add:261:mount[19574]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/01777

install:

Code: [Select]
==partitioning disk sda==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.


The number of cylinders for this disk is set to 476940.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-476940, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-476940, default 476940):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (2-476940, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-476940, default 476940):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (9540-476940, default 9540): Using default value 9540
Last cylinder or +size or +sizeM or +sizeK (9540-476940, default 476940): Using default value 476940

Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table

Disk /dev/sda: 500.1 GB, 500107862016 bytes
64 heads, 32 sectors/track, 476940 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sda1   *        2048    19535871     9766912  83 Linux
/dev/sda2        19535872   976773119   478618624  83 Linux
------ done ------

==format disk sda1==
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
610800 inodes, 2441728 blocks
122086 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2503999488
75 block groups
32768 blocks per group, 32768 fragments per group
8144 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Writing inode tables:  0/75 1/75 2/75 3/75 4/75 5/75 6/75 7/75 8/75 9/7510/7511/7512/7513/7514/7515/7516/7517/7518/7519/7520/7521/7522/7523/7524/7525/7526/7527/7528/7529/7530/7531/7532/7533/7534/7535/7536/7537/7538/7539/7540/7541/7542/7543/7544/7545/7546/7547/7548/7549/7550/7551/7552/7553/7554/7555/7556/7557/7558/7559/7560/7561/7562/7563/7564/7565/7566/7567/7568/7569/7570/7571/7572/7573/7574/75done                            
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
------ done ------

so vdr ist dann wegen segfault weg!

ps:

Code: [Select]
BusyBox v1.19.4 (2012-02-09 03:55:32 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

MLD> ps
  PID USER       VSZ STAT COMMAND
    1 root      2556 S    init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    6 root         0 SW   [migration/0]
    7 root         0 SW   [migration/1]
    9 root         0 SW   [ksoftirqd/1]
   10 root         0 SW   [kworker/0:1]
   11 root         0 SW<  [khelper]
  209 root         0 SW   [sync_supers]
  211 root         0 SW   [bdi-default]
  212 root         0 SW<  [kblockd]
  305 root         0 SW<  [ata_sff]
  313 root         0 SW   [khubd]
  469 root         0 SW   [kswapd0]
  470 root         0 SW   [fsnotify_mark]
  473 root         0 SW<  [xfs_mru_cache]
  474 root         0 SW<  [xfslogd]
  475 root         0 SW<  [xfsdatad]
  476 root         0 SW<  [xfsconvertd]
 1556 root         0 SW   [kworker/1:1]
 1787 root         0 SW   [scsi_eh_0]
 1792 root         0 SW   [scsi_eh_1]
 1797 root         0 SW   [scsi_eh_2]
 1802 root         0 SW   [scsi_eh_3]
 1810 root         0 SW   [kworker/u:3]
 1811 root         0 SW   [kworker/u:4]
 1979 root         0 SW<  [kpsmoused]
 1983 root         0 SW   [kworker/1:2]
 1985 root         0 SW<  [exec-osm]
 2274 root      2556 S    klogd -c 1
 2283 root         0 SW   [kworker/0:2]
 2350 root      2556 S    syslogd -m 0
 2387 root         0 SW<  [loop0]
 2400 root         0 SW<  [loop1]
 2413 root         0 SW<  [loop2]
 2426 root         0 SW<  [loop3]
 2439 root         0 SW<  [loop4]
 2452 root         0 SW<  [loop5]
 2465 root         0 SW<  [loop6]
 2478 root         0 SW<  [loop7]
 2494 root         0 SW<  [loop8]
 2511 root         0 SW<  [loop9]
 2528 root         0 SW<  [loop10]
 2545 root         0 SW<  [loop11]
 2563 root         0 SW<  [loop12]
 2580 root         0 SW<  [loop13]
 2597 root         0 SW<  [loop14]
 3896 root      2556 S    udhcpc -b -H MLD -p /var/run/udhcpc.pid
 4168 root         0 SW<  [loop15]
 4400 root         0 SW<  [loop16]
 7811 root      4124 S    {runx} /bin/sh /usr/bin/runx
 7972 root      4124 S    {startx} /bin/sh /usr/bin/startx
 8061 root      3380 S    xinit /usr/bin/icewm-session-lite -- -ardelay 250 -a
 8172 root         0 SW<  [hd-audio0]
 8210 root         0 SW<  [hd-audio1]
 8569 root     68576 S <  {Xorg} X :0 -ardelay 250 -arinterval 30 vt7
10937 root      4124 S    {runvdr} /bin/sh /usr/bin/runvdr
11380 root         0 SW   [kdvb-ad-0-fe-0]
11401 root      7560 S    /usr/bin/icewm-session-lite
11447 root     10448 S N  icewmbg-lite
11448 root     12340 S    icewm-lite
11449 root     11660 S    icewmtray-lite
11469 root      4124 S    {poswindows} /bin/sh /usr/bin/poswindows
11476 root      3376 S    monitor
11477 root      4124 S    {poswindows} /bin/sh /usr/bin/poswindows
11481 root      4124 S    {startup} /bin/sh /etc/X11/icewm/startup
11485 root      4124 S    {runvdr-sxfe} /bin/sh /usr/bin/runvdr-sxfe -f
11495 root      150m S    /usr/bin/vdr-sxfe --fullscreen --hud --reconnect xvd
11681 root      2048 S    tcpsvd -l0 0 80 /bin/sh /usr/bin/webserver.sh show
11682 root      2560 S    logger -t tcpsvd
18805 root      4128 S    -sh
18807 root      4128 S    -sh
18810 root      4128 S    -sh
18820 root      4128 S    -sh
18990 root      4124 S    {install.sh} /bin/sh /usr/sbin/install.sh manual vdr
19030 root         0 SW   [flush-8:0]
19313 root      4124 S    {svdrpsend.sh} /bin/sh /usr/bin/svdrpsend.sh PLUG ad
19323 root      4044 S    nc localhost 6419
19333 root      4124 S    {rc.action} /bin/sh /etc/vdr/run.d/rc.action restart
19337 root      4124 S    {R30dvb} /bin/sh /etc/vdr/run.d/action.d/R30dvb rest
19338 root      4124 S    {dvb} /bin/sh /etc/init.d/dvb restart
19339 root      4124 S    {dvb} /bin/sh /etc/init.d/dvb stop
19346 root      4120 D    modprobe -r mantis
19479 root         0 SW<  [loop17]
25527 root      2428 S    sshd -E
25546 root      2788 S    sshd -E
25547 root      4128 S    -sh
25564 root      2788 S    sshd -E
25565 root      4128 S    -sh
25570 root      4032 R    ps
MLD>
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


[1] Archiv / MLD 3.x / Development / Kleinigkeiten In Letzter Zeit
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.