[dodger]

Hi,
MarMic you have some kind STB - dreambox for example...
This box work non stop you just turnoff TV - but the dreambox still work. (this way MLD work too)
I want to have option to put MLD in suspend (without channel to play on screen). I dreambox you have option suspend in menu. Whats happend when you press it? --> that's what I want, my system still work but just tunner is stoped and when i want with remote to turn it on again..

I hope you understand me  

[MarMic]

hmmm try the suspend addon?!

but it could be that some modules will nto work correctly after a start from hibernation.

i have a kathrein ufs 910 with neutrino/e2 and vdr -> it will stop JUST the decoder chip -> i measured it -> it is the same power used ON/and OFF -> so i only use HARDOFF :-P

greetz MarMic

[clausmuus]

All addons that need e.g. an un- and reload of drivers must have a "halt" and "resume" section in the /etc/init.d/ADDONNAME that handle this.

Claus

[dodger]

ok ill try to find some solution.. thanks for replays

@MarMic after checking my log/messages i found this error about rotorng plugin(i remove totally my version and install from addons section)

Mar 27 17:37:59 (none) user.err vdr: [3851] ERROR: unknown config parameter: rotorng.DVB-Karte = 1

Karte? is this on german?

I have other question again if I have working vdr but without frontend, what packages/libs i need to have this frontend. One is vdr-plugin-xineliboutput xineliboutput-sxfe libxine-dev libxine2 what other i need.. this is for pure linux for compiling from source(no apt-get)

thanks

[orgel]

There is an Step-by-Step Howto build for MLD3.x oneiric in german
http://www.vdr-wiki.de/wiki/index.php/Step..._MLD3.x_oneiric

i hope this helps

best regards
orgel

[MarMic]

please add a hardware signature.

Karte means card -> that is your dvbcard device. rotorng is using the first card and i think thats a problem because the first device ist normally xineliboutput -> maybe change it to 2

greetz MarMic