[1] Archiv / MLD 3.x / General / Mld Mit Technisat Skystar S2 Rev. 3.3
 

Offline Kazool

  • Adv. Member
  • ***
  • Posts: 132
    • View Profile
Mld Mit Technisat Skystar S2 Rev. 3.3
« on: July 16, 2012, 09:31:46 »
Hallo zusammen,

ich versuche seit gestern auf meinem HTPC MiniDVBLinux zu installieren. Leider scheitert es wie bei jeder Linux Distri an meiner TV-Karte. Da MLD "modular aufgebaut ist, hoffe ich das Ihr mir vielleicht helfen könnt. Hier mal die System Messages

Jul 16 07:13:39 (none) syslog.info syslogd started: BusyBox v1.19.4
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2492]: uid/gid/perm /var/spool/apm.mnt/acpi 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2505]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2518]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2531]: uid/gid/perm /var/spool/apm.mnt/powersave 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2544]: uid/gid/perm /var/spool/apm.mnt/xorg 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2557]: uid/gid/perm /var/spool/apm.mnt/xorg-autodetect 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2570]: uid/gid/perm /var/spool/apm.mnt/xorg-nvidia 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2583]: uid/gid/perm /var/spool/apm.mnt/lib-pango 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2600]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2617]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2634]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2651]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 0/0/0775
Jul 16 07:13:39 (none) user.warn kernel: aufs test_add:261:mount[2668]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 0/0/0775
Jul 16 07:13:40 (none) user.warn kernel: aufs test_add:261:mount[2685]: uid/gid/perm /var/spool/apm.mnt/lib-xine 0/0/0777, 0/0/0775
Jul 16 07:13:40 (none) user.warn kernel: aufs test_add:261:mount[2702]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Jul 16 07:13:40 (none) user.warn kernel: aufs test_add:261:mount[2719]: uid/gid/perm /var/spool/apm.mnt/xineliboutput 0/0/0777, 0/0/0775
Jul 16 07:13:40 (none) user.warn kernel: aufs test_add:261:mount[2736]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Jul 16 07:13:40 (none) user.warn kernel: aufs test_add:261:mount[2753]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Jul 16 07:13:42 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jul 16 07:13:42 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jul 16 07:13:42 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
Jul 16 07:13:42 (none) user.info kernel: XFS (sda2): Ending clean mount
Jul 16 07:13:44 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jul 16 07:13:44 (none) user.info kernel: r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xf8018000, 00:19:66:f1:74:10, XID 083000c0 IRQ 17
Jul 16 07:13:44 (none) user.info kernel: r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Jul 16 07:13:44 (none) user.info kernel: r8169 0000:01:00.0: eth0: link down
Jul 16 07:13:44 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 16 07:13:46 (none) user.info kernel: r8169 0000:01:00.0: eth0: link up
Jul 16 07:13:46 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 16 07:13:50 (none) user.info kernel: Linux agpgart interface v0.103
Jul 16 07:13:51 (none) user.info kernel: hda_intel: Disabling MSI
Jul 16 07:13:51 (none) user.info kernel: HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
Jul 16 07:13:51 (none) user.info kernel: HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
Jul 16 07:13:51 (none) user.info kernel: input: Xonar DS Headphone as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/sound/card1/input2
Jul 16 07:13:54 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jul 16 07:13:54 (none) user.err kernel:    As the driver is backported to an older kernel, it doesn't offer
Jul 16 07:13:54 (none) user.err kernel:    enough quality for its usage in production.
Jul 16 07:13:54 (none) user.err kernel:    Use it with care.
Jul 16 07:13:54 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jul 16 07:13:54 (none) user.err kernel:    931efdf58bd83af8d0578a6cc53421675daf6d41 Merge branch 'v4l_for_linus' into staging/for_v3.6
Jul 16 07:13:54 (none) user.err kernel:    2cefabc00ffdc1f22f960df946ae41b163081d5e v4l: Export v4l2-common.h in include/linux/Kbuild
Jul 16 07:13:54 (none) user.err kernel:    b7e386360922a15f943b2fbe8d77a19bb86f2e6f media: Revert [media] Terratec Cinergy S2 USB HD Rev.2
Jul 16 07:13:54 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:13:54 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:13:54 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:13:54 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:13:54 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:13:54 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:13:54 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:13:54 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:13:54 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:13:54 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:13:54 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:13:54 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:13:54 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:13:54 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:13:55 (none) user.err vdr: [4183] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:13:55 (none) user.err vdr: [4183] ERROR: invalid primary device number: 1
Jul 16 09:13:55 (none) user.err vdr: [4183] ERROR: no primary device found - using first device!
Jul 16 09:13:55 (none) user.err vdr: [4183] ERROR: invalid primary device number: 1
Jul 16 07:13:57 (none) user.debug kernel: eth0: no IPv6 routers present
Jul 16 07:14:05 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Jul 16 07:14:05 (none) user.info kernel: ACPI: Power Button [PWRB]
Jul 16 07:14:05 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Jul 16 07:14:05 (none) user.info kernel: ACPI: Power Button [PWRF]
Jul 16 09:14:05 (none) daemon.info acpid: starting up with proc fs
Jul 16 09:14:05 (none) daemon.info acpid: 1 rule loaded
Jul 16 09:14:05 (none) daemon.info acpid: waiting for events: event logging is off
Jul 16 07:14:05 (none) user.info kernel: powernow: This module only works with AMD K7 CPUs
Jul 16 07:14:05 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Jul 16 07:14:06 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:14:06 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:14:06 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:14:06 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:14:06 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:14:06 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:14:06 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:14:06 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:14:06 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:14:06 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:14:06 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:14:06 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:14:06 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:14:06 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:14:09 (none) user.err vdr: [6797] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:09 (none) user.err vdr: [6797] ERROR: invalid primary device number: 1
Jul 16 09:14:09 (none) user.err vdr: [6797] ERROR: no primary device found - using first device!
Jul 16 09:14:09 (none) user.err vdr: [6797] ERROR: invalid primary device number: 1
Jul 16 09:14:10 (none) user.err vdr: [8023] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:10 (none) user.err vdr: [8027] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:10 (none) user.err vdr: [8030] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:10 (none) user.err vdr: [8034] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 07:14:18 (none) user.info kernel: bootsplash: status on console 0 changed to on
Jul 16 09:14:18 (none) auth.info login[12301]: root login on 'tty1'
Jul 16 09:14:18 (none) auth.info login[12302]: root login on 'tty2'
Jul 16 09:14:18 (none) auth.info login[12306]: root login on 'tty3'
Jul 16 09:14:18 (none) auth.info login[12310]: root login on 'tty4'
Jul 16 07:14:19 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Jul 16 07:14:19 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:14:19 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:14:19 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:14:19 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:14:19 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:14:19 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:14:20 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:14:20 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:14:20 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:14:20 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:14:20 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:14:20 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:14:20 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:14:20 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:14:20 (none) user.err vdr: [13159] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:20 (none) user.err vdr: [13159] ERROR: invalid primary device number: 1
Jul 16 09:14:20 (none) user.err vdr: [13159] ERROR: no primary device found - using first device!
Jul 16 09:14:20 (none) user.err vdr: [13159] ERROR: invalid primary device number: 1
Jul 16 07:14:30 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Jul 16 07:14:31 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:14:31 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:14:31 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:14:31 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:14:31 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:14:31 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:14:31 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:14:31 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:14:31 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:14:31 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:14:31 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:14:31 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:14:31 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:14:31 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:14:31 (none) user.err vdr: [14458] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:31 (none) user.err vdr: [14458] ERROR: invalid primary device number: 1
Jul 16 09:14:31 (none) user.err vdr: [14458] ERROR: no primary device found - using first device!
Jul 16 09:14:31 (none) user.err vdr: [14458] ERROR: invalid primary device number: 1
Jul 16 07:14:42 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Jul 16 07:14:42 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:14:42 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:14:42 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:14:42 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:14:42 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:14:42 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:14:42 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:14:42 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:14:42 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:14:42 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:14:42 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:14:42 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:14:42 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:14:42 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:14:43 (none) user.err vdr: [16836] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:43 (none) user.err vdr: [16836] ERROR: invalid primary device number: 1
Jul 16 09:14:43 (none) user.err vdr: [16836] ERROR: no primary device found - using first device!
Jul 16 09:14:43 (none) user.err vdr: [16836] ERROR: invalid primary device number: 1
Jul 16 07:14:53 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Jul 16 07:14:53 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jul 16 07:14:53 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Jul 16 07:14:53 (none) user.info kernel: flexcop-pci: card revision 2
Jul 16 07:14:53 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Jul 16 07:14:53 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e1:1b:29
Jul 16 07:14:53 (none) user.err kernel: CX24123: wrong demod revision: 7
Jul 16 07:14:53 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jul 16 07:14:53 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jul 16 07:14:53 (none) user.warn kernel: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jul 16 07:14:53 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jul 16 07:14:53 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Jul 16 07:14:53 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jul 16 07:14:53 (none) user.debug kernel: mt312_read: ret == -121
Jul 16 07:14:53 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jul 16 09:14:54 (none) user.err vdr: [18780] ERROR: libbz2.so.1.0: cannot open shared object file: No such file or directory
Jul 16 09:14:54 (none) user.err vdr: [18780] ERROR: invalid primary device number: 1
Jul 16 09:14:54 (none) user.err vdr: [18780] ERROR: no primary device found - using first device!
Jul 16 09:14:54 (none) user.err vdr: [18780] ERROR: invalid primary device number: 1

Wie Ihr seht wird die Karte nicht richtig installiert. Und das ist bei jeder Distri so. Habt Ihr eventuell die Möglichkeit einen Treiber zu basteln, den man dann über das WEBif auswählen kann? Ich bin nämlich absoluter Linux Laie. Auch bei jeder neuen Kernel Version ist der Treiber wieder weg.

Hier noch ein paar Links zu dem Thema:

YaVDR Skystar S2
Support Technisat S2
Anleitung S2

Scheint wohl auch ein wichtiger Link zu sein, bin aber der russischen Sprache nicht mächtig:

Technisat Skystar S2

Solltet Ihr das hinbekommen wäre ich Euch mehr als dankbar

Gruß
Kazool
 

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Mld Mit Technisat Skystar S2 Rev. 3.3
« Reply #1 on: July 16, 2012, 12:09:18 »
hi kazool,

so wie ich das schnell überblicken konnte sind die treiber nicht upstream. der patch hilft auch nicht weiter, da sobald sich irgendwas upstream ändert -> crashts

da die develumgebung immer versucht den neusten stand zu bauen will ich nicht riskieren das ein patch für eine unsupported card rein kommt, bzw weiss ich noch nicht mal ob der verlinkte patch auch gegen treiber > 3.4 baut, oder welche sideeffects auftretten (mit powarman und ufos repos)

d.h. entweder du baust dir die treiber selbst (wiki -> develumgebung aufsetzen), oder du hollst dir ne karte die upstream supported ist.

sorry, aber da können wir nicht viel machen...

greetz MarMic
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline Kazool

  • Adv. Member
  • ***
  • Posts: 132
    • View Profile
Mld Mit Technisat Skystar S2 Rev. 3.3
« Reply #2 on: July 16, 2012, 12:37:41 »
Ok...dann danke ich Dir für deine Mühen. Ich finde es nur sehr komisch, das eine DVB-S2 Karte eines renommierten Herstellers seit Ewigkeiten von Linux allgemein nicht unterstützt wird. Die Karte ist ja auch nicht eine die es sehr selten zu kaufen gibt. Nun ja...

Kann mir einer von Euch dann eventuell einen Tip für eine DVB-S2 Karte im Low Profile Format geben, die "out-of-box" unter Linux funktioniert? Wichtig ist vor allen Dingen, das Sie Unicable, zumindest unter VDR, unterstützt. Oder sollte das mit jeder Karte gehen?

Gruß
Kazool

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Mld Mit Technisat Skystar S2 Rev. 3.3
« Reply #3 on: July 16, 2012, 13:29:17 »
hi kazool,

renomiert sei mal dahin gestellt :-P

und die karte wird ja auch unterstützt nur halt nicht in der ausführung 3.3 (da scheinen sich bauteile geändert zu haben)

ich selbst nutze die

technisat skystar HD 2 (welche rev -> kA)

zudem nutze ich die tevii s480 (problematische karte ABER mld fängt das ganz gut ab -> d.h. läuft ansich immer oob)

vllt kann ja noch jemand einen tipp geben

greetz MarMic
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline orgel

  • Profi Member
  • ****
  • Posts: 298
    • View Profile
    • http://www.ewuflor.de
Mld Mit Technisat Skystar S2 Rev. 3.3
« Reply #4 on: July 16, 2012, 13:59:12 »
Zum Thema Unicable, dass muss meines Wissens nach nur der LNB unterstützen und nicht die Karte. Einen guten Anhaltspunkt für DVB Karten die unter Linux gehen, liefert  Linux TV.


Gruß
Orgel
Server mit Client 1: M4N68T Pro, 245e, 4GB, NVIDIA GT 520, 1TB HDD, 4 x TT S2-3200, X10, MLD 3.0.3 Developer Edition
Client 2: MSI MD5000, P4 2.98, 2GB, ATI 9800 Pro, 80GB HD, X10, MLD 3.0.3 Developer Edition

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20447
    • View Profile
    • ClausMuus.de
Mld Mit Technisat Skystar S2 Rev. 3.3
« Reply #5 on: July 16, 2012, 15:23:54 »
Hi,

soweit ich das in erinnerung muss auch noch der DVB-Treiber das Unicable unterstützen. Mir ist aber nicht bekannt, das eine der von uns unterstützten DVB-S2 Karten kein Unicalbe kann.
Ich selber setzte die MP-S2 mit Unicable ein. Die ist Low-Profile und hat zwei Tuner. Ich glaube die tevii s480 ist aber deutlich günstiger.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

[1] Archiv / MLD 3.x / General / Mld Mit Technisat Skystar S2 Rev. 3.3
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.