[1] Archiv / MLD 3.x / General / Neuinstalltion ==> Kein Bild
 

Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1461
    • View Profile
Neuinstalltion ==> Kein Bild
« on: March 26, 2013, 11:01:35 »
Hi,

ich habe einen Freund von der MLD überzeugt, nachdem er meine gesehen hat. Und wollte ich seine andere Distri von der Platte nehmen. Also alles wichtige an Aufnahmen gesichert und eine aktuelle 3.0.2 eingespielt.

Boot und Installation läuft normal durch, auch mit dem neuen Kernel. Wiedermal perfekte Arbeit...  :applaus

Aber nach dem die MLD nun die richtige Channels.conf erhalten hat und ein Reboot erlebte, habe ich bisher immer bereits ein Bild am Fernseher gehabt. Dann ging es weiter zur Toneinstellung, usw.... (alles nur Kleinigkeiten).

Leider bekommen wir hier kein Bild angezeigt, der VDR läuft im VDRAdmin sind bereits EPG-Informationen enthalten und im /var/log/messages kommt auch keine ERROR-Meldung (z.b. von einem Restart).

Im Log /var/log/vdr-sxfe erscheint allerdings folgendes:
Quote
process 4254: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[4254] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 5491: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[5491] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 7150: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[7150] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 9326: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[9326] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 10894: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[10894] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 12627: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[12627] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 13933: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[13933] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 14072: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[14072] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 14210: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[14210] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 14348: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[14348] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 14486: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[14486] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 15337: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[15337] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 15475: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[15475] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 15613: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[15613] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 15751: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[15751] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error
process 15889: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
[15889] [scrnsaver] Failed to open connection to bus: //bin/dbus-launch terminated abnormally without any error message
Bus error

Ok, die Meldung kommt auch bei meiner funktionierenden MLD, aber nur einmal, danach wird das VDPAU gestartet.

Oder kann es am ZOTAC Board liegen, weil nur ein ATOM mit 1.6 GHz Prozessor (was macht die andere Distri dann besser?)

Habt ihr eine Idee?

Hintergrundinformationen. Es handelt sich um eine PCI TBS 6920 S2-Karte, sie wird aber scheinbar korrekt identifiziert:
Code: [Select]
MLD> dmesg | grep dvb
aufs test_add:264:mount[382]: uid/gid/perm /var/spool/apm.mnt/dvbapi 0/0/0777, 0/0/0775
aufs test_add:264:mount[923]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
aufs test_add:264:mount[935]: uid/gid/perm /var/spool/apm.mnt/dvb-remote 0/0/0777, 0/0/0775
aufs test_add:264:mount[947]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 0/0/0775
        v4l-dvb-saa716x: cfa4b4faab67367b8012bcd49156e977fe235edc saa716x: remove __devinit and friends
        v4l-dvb-saa716x: cfa4b4faab67367b8012bcd49156e977fe235edc saa716x: remove __devinit and friends
        v4l-dvb-saa716x: cfa4b4faab67367b8012bcd49156e977fe235edc saa716x: remove __devinit and friends
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...

Folgende Addons habe ich installiert. Fehlt da etwas?
Code: [Select]
acpi  5  2.0.10  26-Mar-2013
addons  44  0.4.0  26-Mar-2013
alsa  97  1.0.25  26-Mar-2013
arghdirector  11  0.2.7  26-Mar-2013
at  7  3.1.13  26-Mar-2013
backup  48  2.1  26-Mar-2013
bash  3  4.2.24  26-Mar-2013
channellogos  4  0.1  26-Mar-2013
duplicates  1  0.0.3  26-Mar-2013
dvb  176  2013.03.18  26-Mar-2013
dvbapi  4  2013.02.18  26-Mar-2013
dvb-remote  25  2013.03.18  26-Mar-2013
dvb-usb  63  2013.03.18  26-Mar-2013
epgsearch  9  2013.03.24  26-Mar-2013
eventlircd  10  0.0.1  26-Mar-2013
evtest  2  1.29  26-Mar-2013
extrecmenu  7  2012.12.21  26-Mar-2013
favorites  1  0.0.2  26-Mar-2013
femon  5  1.7.19  26-Mar-2013
fritzbox  8  1.5.2  26-Mar-2013
imonlcd  5  2013.03.23  26-Mar-2013
initramfs  405  1.20.2  --
irkeytable  11  0.8.6  26-Mar-2013
kernel  163  3.8.4.163  26-Mar-2013
lib-av  12  53  26-Mar-2013
lib-curl  3  4.2.0  26-Mar-2013
lib-pango  2  1.6.0  26-Mar-2013
lib-x  16  0  26-Mar-2013
lib-xine  7  2013.03.25  26-Mar-2013
lib-xine-drivers  2  2013.03.25  26-Mar-2013
lirc  98  2013.03.25  26-Mar-2013
locales  49  0  26-Mar-2013
markad  9  2013.01.02  26-Mar-2013
mplayer  12  4.6  26-Mar-2013
mplayerplugin  5  2010.12.12  26-Mar-2013
network  83  0  26-Mar-2013
network-drivers  2  0  26-Mar-2013
ntp-client  1  0  26-Mar-2013
openjava  5  1.6.0.27  26-Mar-2013
osdteletext  11  2013.03.10  26-Mar-2013
pam  2  1.1.3  26-Mar-2013
perl  8  5.14.2  26-Mar-2013
ripit  8  2012.12.29  26-Mar-2013
rssreader  2  1.7.3  26-Mar-2013
setup  52  0.3.1  26-Mar-2013
ssh  16  2011.54  26-Mar-2013
text2skin  19  2012.06.04  26-Mar-2013
text2skin-anthra-skins  18  1.1  26-Mar-2013
undelete  6  2012.10.09  26-Mar-2013
usbutils  1  005  26-Mar-2013
vch  12  1.1.0  26-Mar-2013
vdr  412  1.7.42.412  26-Mar-2013
vdradmin-am  29  3.6.9  26-Mar-2013
wakeup  13  1.1  26-Mar-2013
webserver  194  0  26-Mar-2013
xineliboutput  106  2013.02.09  26-Mar-2013
xorg  162  1.11.3  26-Mar-2013
xorg-autodetect  21  1.11.3  26-Mar-2013
xorg-nvidia  84  310.40  26-Mar-2013
yaepghd  12  0.0.3.ce  26-Mar-2013

und laut Systeminfo werden folgende Module gefunden:

Code: [Select]
Module                  Size  Used by    Tainted: P  
thermal                 6525  0
fan                     1833  0
snd_seq_oss            19139  0
snd_seq_midi_event      3632  1 snd_seq_oss
snd_seq                32213  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          3528  2 snd_seq_oss,snd_seq
snd_pcm_oss            25644  0
snd_mixer_oss           9814  1 snd_pcm_oss
imon                   15919  0
uinput                  5246  0
cx24116                10769  1
snd_hda_codec_hdmi     20832  1
snd_hda_codec_realtek    41722  1
cx23885               113211 14
videobuf_dma_sg         5600  1 cx23885
rc_core                 9864  2 imon,cx23885
altera_ci               6010  1 cx23885
cx2341x                11665  1 cx23885
v4l2_common             5337  2 cx23885,cx2341x
videodev               67398  3 cx23885,cx2341x,v4l2_common
media                   6873  1 videodev
tveeprom                9781  1 cx23885
videobuf_dvb            3354  1 cx23885
videobuf_core          10763  3 cx23885,videobuf_dma_sg,videobuf_dvb
dvb_core               60433  3 cx23885,altera_ci,videobuf_dvb
btcx_risc               2383  1 cx23885
tda18271               28592  1 cx23885
altera_stapl           17764  1 cx23885
nvidia               8527506 28
snd_hda_intel          21769  0
snd_hda_codec          59458  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               3843  1 snd_hda_codec
snd_pcm                45833  5 snd_pcm_oss,snd_hda_codec_hdmi,cx23885,snd_hda_intel,snd_hda_codec
snd_timer              11977  2 snd_seq,snd_pcm
snd                    34781 13 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,cx23885,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc          4898  2 snd_hda_intel,snd_pcm
button                  3421  0
processor              22967  0
forcedeth              41211  0

Gruß,

Pit
----------------------------------------------------------------------
VDR 1:(MLD 6.5-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD 5.4-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Neuinstalltion ==> Kein Bild
« Reply #1 on: March 26, 2013, 11:20:14 »
nimm mal nen reines standard iso und boote verbose dann siehste ja ob die tbs karte funzt nachdem du dann astra 19.2 presorted ausgewählt hast.

sicher das die karten treiber im dvb addon drin sind und nicht dvb-tbs brauchst?

was heisst kein bild? kein xorg? also nur konsole? oder nur kein vdr frontend

viel zu viele addons! erst einmal basic zum laufen bringen und dann addons nachladen!

greetz MarMic
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4


Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1461
    • View Profile
Neuinstalltion ==> Kein Bild
« Reply #2 on: March 27, 2013, 18:49:33 »
Hi,

Ich hab den Fehler replizierbar gefunden, und es war wiedermal 50 cm vor dem Bildschirm... Mein Kumpel hatte den Rechner vorher noch mit einem BIOS Update versehen und dabei wurde auch der Mainboard Grafikspiecher nur auch Default (64MB) RAM gestellt. Das habe ich erst vorhin gesehen, aber vielleicht hilft ja irgendwann mal dieser Post anderen schneller darauf zu kommen.  :wand

Ich konnte mir auch nicht vorstellen, die MLD mehr Resourcen benötigt als andere, das ist doch eher anders herum..

Also, Entschuldigung für den Fehlalarm.

Gruß,

Pit

P.S.: wieder einer mehr der die MLD gerne testet und auch anwendet...
 
----------------------------------------------------------------------
VDR 1:(MLD 6.5-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD 5.4-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

[1] Archiv / MLD 3.x / General / Neuinstalltion ==> Kein Bild
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.