[eyeamok]

I got raspberry working real good now, but I can't figure out how to make it full Screen on SD channels, on PC version Xineliboutput has option to Autocrop, but not in Raspberry. Is there a way to fix this??? HD channels are Full Screen.

2. I also use Parex Media Remote and have map, which I used to put in eventlircd on PC version, and rule to put in modprobe.d, but not on raspberry, tried Train Remote but it did not recognize a lot of buttons. Have tried a few things to no avail, what addons should I install to use this remote.

Thanks for all your help.

[t-bird.de]

Hello eyeamok,

first of all: Welcome aboard!

You should think about using rpihddevice instead xineliboutput. Afaik xineliboutput won't be developed anymore for the RPI.

You can easily try rpihddevice by installing the rpi-image to an SD-card. Just download the image and unrar it to the freshly formatted SD-card, put it into the RPI, start the RPI and enjoy.

You can easily setup your remote using the webif.

Kind regards

t-bird

[clausmuus]

Hi eyeamok,

if you already use the rphddevice (the rpi image), the fullscreen problem is maybe only for channels in your language? I never have had this problem (in my tests) for German channels. If this true, please inform the rphddevice developer on the vdr-portal http://www.vdr-portal.de/board18-vdr-hardware/board98-arm-co/p1163154-prototyp-rpi-ausgabeplugin/#post1163154 about this problem.

What kind of remote does it is? Does it have an USB reciver? Does I understand it right, that you can use/train some keys, and some other keys not?
Some USB remote control recivers don't work well on the RPI. Also most USB devices need a powerd USB hub. Du you use one? Does your RPI power supply is have enough? Does it have sourly more than 700mA?

Claus

[eyeamok]

power is good 1.2 amps,, usb remote "Parex 9708" media remote. I have ev.map for it and was no problem on PC version with dvb-remopte installed, MLD even had conf file for Parex Remote, and I have key map, but nowhere to put map on RPI, as for Rpihddevice, I looked at it in web menu and wasn't sure of what settings to use, will play with it tonight.

Thanks for all the help.

[t-bird.de]

Hi eyeamok,

keymapping is usually done in file /etc/vdr/remote.conf. Have a look for this file.

Kind regards

t-bird