[gkd-berlin]

Hallo,

Test: MLD-4.0.0-rpi_rpi_2014.05.30-57.tar  vom 31.5.  12:08h

nach dem 1. Booten vom Stick steht in der sysinit:

Code: [Select]

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for libglib2.0-0:
* libffi5 (>= 3.0.10-1) *
* opkg_install_cmd: Cannot install package libglib2.0-0.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package sensors.
* check_data_file_clashes: Package vc wants to install file /etc/ld.so.conf.d/vc.conf
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libGLESv2.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_vc_client.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_core.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvcos.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libOpenVG.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_util.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libEGL.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvchiq_arm.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libdebug_sym.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libbcm_host.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libopenmaxil.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcdbg
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/mmal_vc_diag
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/edidparser
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcgencmd
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vchiq_test
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspistill
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/tvservice
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspivid
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspiyuv
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/sbin/vcfiled
But that file is already provided by package  * libraspberrypi-bin
* opkg_install_cmd: Cannot install package vc.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package vdr-plugin-systeminfo.
failed
....
Starting ntp-client
ntpd: bad address 'de.pool.ntp.org'
failed
failed
Starting ntp client:
31 May 23:47:38 ntpdate[6237]: step time server 213.209.109.45 offset 1401572669.463006 sec
done
und in der messages:

Code: [Select]

Jan  1 01:02:40 (none) daemon.err udevd[5804]: failed to execute '/lib/udev/usb-db' 'usb-db /devices/platform/bcm2708_usb/usb1/1-1/1-1.1/1-1.1:1.0/net/eth0': No such file or directory
Jan  1 01:02:41 (none) daemon.err udevd[5813]: failed to execute '/lib/udev/net.agent' 'net.agent': No such file or directory
Jan  1 01:02:42 (none) daemon.err udevd[5868]: failed to execute '/lib/udev/net.agent' 'net.agent': No such file or directory
Jan  1 01:02:42 (none) daemon.err udevd[5870]: failed to execute '/lib/udev/edd_id' 'edd_id --export /dev/sda': No such file or directory
Jan  1 00:02:42 (none) user.warn kernel: [  163.511049] XFS (mmcblk0p1): unknown mount option [nls].

Trotzdem, Installation auf Festplatte über WebIf.  Keine Fehlermeldung.

reboot

Code: [Select]

Kernel panic - not syncing : VFS: Unable to mount root of fs on unknown - block(8,1)
Es folgen noch ca. 8-10 Fehlermeldungen.
Dann steht das System.

--------------------------------------------------------------

SD-Karte (Installiertes System auf Festplatte) der vorherigen Installation genommen.
In der Sysinit gibt es ein paar Fehlermeldungen:

Code: [Select]

Load preselected kernel modules:
modprobe: can't change directory to '3.13.11.49': No such file or directory
modprobe: can't change directory to '3.13.11.49': No such file or directory
modprobe: can't change directory to '3.13.11.49': No such file or directory
modprobe: can't change directory to '3.13.11.49': No such file or directory
failed
Checking filesystems:
Btrfs Btrfs v0.19
done
Mounting filesystems:
mount: mounting UUID=DC31-53AA on /boot failed: No such file or directory
failed
Move cache to data device:
done
Starting eventlircd
modprobe: can't change directory to '3.13.11.49': No such file or directory
Das vorherige System startet, obwohl bei der Installation des aktuellen Systems "Format System partition" angegeben war.
Ich kann fernsehen und die alten Aufzeichnungen können angesehen werden.

Für mich: Keine Ahnung was da los ist.

Gruß Gerhard

Es ist doch das neu installierte System. Die Kanalliste stimmt nicht und die Fernbedienung funktioniert auch nicht. Meine lircd.conf fehlt.
Beides ins neue System kopiert, Kanalliste stimmt FB läuft nicht.

[clausmuus]

Hi,

es gab nen Problem mit dem neuen Kernel. Daher die Kernel Panik nach der Installation. Das sollte mit dem Update das gleich fertig ist behoben sein.

Um das Problem mit dem sensors Paket kümmere ich mich später.

Claus

[gkd-berlin]

Hallo,

Test: MLD-4.0.0-rpi_rpi_2014.06.01-60.tar  vom 2.6.  0:07h

Nach Installation auf Festplatte: Kein Booten.
Nach 6 Zeilen Plattenerkennung mit "sda ist Ruhe.

Mir ist aufgefallen, beim Herunterfahren nach reboot kommen Fehlermeldungen. 4 oder 5 Zeilen /etc/init.d/xxx zeile xxx ...
Ist sehr schnell vom Bildschirm verschwunden.

Gruß Gerhard

[clausmuus]

Hi,

die Fehlermeldungen sollten weg sein (wenn Du die selben gesehen hast wie ich). Auch das Installierte System bootet bei mir inzwischen wieder. Bei der Installation treten gelegentlich Fehler auf, bei denen ich noch nicht herausgefunden habe woher die kommen. Ein erneutes aufrufen der Installation klappt dann aber immer.
Bei den aktuellen Images gibt's noch nen Problem mit dem holen der Zeit aus dem Internet. Das wird aber bei den nächsten Images (in ner halben Stunde) behoben sein.

Claus

[gkd-berlin]

Hallo,

Test: MLD-4.0.0-rpi_rpi_2014.06.02-61.tar  vom 2.6.  11:58h

Nach 1. Booten von SD-Karte:

Code: [Select]

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for libglib2.0-0:
* libffi5 (>= 3.0.10-1) *
* opkg_install_cmd: Cannot install package libglib2.0-0.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package sensors.
* check_data_file_clashes: Package vc wants to install file /etc/ld.so.conf.d/vc.conf
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libGLESv2.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_vc_client.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_core.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvcos.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libOpenVG.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_util.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libEGL.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvchiq_arm.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libdebug_sym.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libbcm_host.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libopenmaxil.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcdbg
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/mmal_vc_diag
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/edidparser
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcgencmd
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vchiq_test
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspistill
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/tvservice
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspivid
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspiyuv
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/sbin/vcfiled
But that file is already provided by package  * libraspberrypi-bin
* opkg_install_cmd: Cannot install package vc.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package vdr-plugin-systeminfo.
failed
Nach Installation auf Festplatte:

Aufruf über Putty:

Code: [Select]

MLD> mc
/bin/mc: line 7: /usr/bin/mc: Input/output errorStart WebIf:

Code: [Select]

File not found: index.sh
Über Putty in Sysinit:

Code: [Select]

Activate rtc:                                                        failed
ntp taucht in der Sysinit nicht auf.

Gruß Gerhard

[clausmuus]

Hi,

ich bin ziehmlich sicher, dass Du nen altes Image erwischt hast, bzw. die Installation fehl geschlagen ist und Du ne alte Installation gebootet hast. Vielleicht gibt's ja auch nur Probleme mit der sd-karte, oder Du hast ne individuelle Installation gemacht, und vergessen auszuwählen das die System Partition formartiert werden soll,...

Claus

[gkd-berlin]

Hallo,

die vorherige Installation war ein angepasstes Image von heute 11:58.

Code: [Select]

start installation
format disk sda1
install system on sda1
write boot files on mmcblk0p1
Installation completed
Test: MLD-4.0.0-rpi_rpi_2014.06.02-61.tar  vom 2.6.  13:37h

Nach 1. Booten von SD-Karte:

Code: [Select]

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for libglib2.0-0:
* libffi5 (>= 3.0.10-1) *
* opkg_install_cmd: Cannot install package libglib2.0-0.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package sensors.
* check_data_file_clashes: Package vc wants to install file /etc/ld.so.conf.d/vc.conf
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libGLESv2.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_vc_client.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_core.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvcos.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libOpenVG.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_util.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libEGL.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvchiq_arm.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libdebug_sym.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libbcm_host.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libopenmaxil.so
But that file is already provided by package  * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcdbg
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/mmal_vc_diag
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/edidparser
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcgencmd
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vchiq_test
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspistill
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/tvservice
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspivid
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspiyuv
But that file is already provided by package  * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/sbin/vcfiled
But that file is already provided by package  * libraspberrypi-bin
* opkg_install_cmd: Cannot install package vc.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package  * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package  * rpi-rtc
* opkg_install_cmd: Cannot install package vdr-plugin-systeminfo.
nach 1. reboot

Code: [Select]

Sysinit:
cat: can't open '/proc/5508/cmdline': No such file or directory
Starting vdradmin server:
done

setup seems to hang! continue now...
Setting up setup menu:
doneMehr stand nicht drin.

nach 2. reboot

Code: [Select]

Activate rtc:      failed
....
Das System läuft.

Gruß Gerhard

[clausmuus]

OK, ein Teil der Fehlermeldungen kommt, weil Du noch das vc Paket in Deinem individuellem Image drin hast, das eigendlich schon gar nicht mehr hätte auf dem Server sein sollen. Hab's nun entfernt, da das umbenannt wurde.

Claus

[gkd-berlin]

Hallo,

inzwischen habe ich die Hardware für mein "WakeUp-Modul" aufgebaut. Hier sind nun die ersten Ergebnisse.

Getestet mit Raspian:

Code: [Select]

root@raspberrypi:~# date
Mi 4. Jun 22:04:40 CEST 2014
root@raspberrypi:~# hwclock
Mo 10 Okt 2005 00:12:45 CEST  -0.948208 secondsDie RTC war vorher mit meiner Testhardware auf 10.10.2005 eingestellt.

Code: [Select]

root@raspberrypi:~# i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


Code: [Select]

root@raspberrypi:~# hwclock -w
root@raspberrypi:~# date
Mo 10. Okt 00:16:30 CEST 2005
root@raspberrypi:~# hwclock
Mo 10 Okt 2005 00:16:39 CEST  -0.411536 seconds
Uhr abgesteckt:

Code: [Select]

root@raspberrypi:~# i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --Daraus folgt: RTC einmal erkannt, immer da. Es wird nicht noch einmal auf die HW zugegriffen.

Code: [Select]

root@raspberrypi:~# hwclock
hwclock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Eingabe-/AusgabefehlerHier wird die HW abgefragt.


Getestet mit MLD-4.0.0-rpi_rpi_2014.06.02-61.tar  vom 2.6.  13:37h nach Installation auf Festplatte:

In der Sysinit finde ich:

Code: [Select]

Activate rtc:              failedIn der Sysinit ist kein Hinweis auf eine ntp-Abfrage.

Das steht in der Messages zu rtc und ds1307:

Code: [Select]

....
Jan  1 01:00:06 (none) user.info kernel: [    2.570127] rtc-test rtc-test.0: rtc core: registered test as rtc0
Jan  1 01:00:06 (none) user.info kernel: [    2.571242] rtc-test rtc-test.1: rtc core: registered test as rtc1
....
Jan  1 01:00:06 (none) user.info kernel: [    2.645797] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
....
Jan  1 01:00:16 (none) user.info kernel: [   16.574202] i2c /dev entries driverEinträge zur DS1307 fehlen komplett.

Date und Hwclock:

Code: [Select]

MLD> date
Do Jan  1 01:14:45 CET 1970
MLD> hwclock
Do 01 Jan 1970 00:14:51 CET  0.000000 seconds
In der RTC steht noch immer Datum und Zeit vom Raspian-Test.

i2cdetect bringt:

Code: [Select]

MLD> i2cdetect -y 1
Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory

Für mich sieht es so aus: Es kann auf die RTC nicht zugegriffen werden.
hwclock --set --date=".............." gibt es leider in der MLD nicht.

Gruß Gerhard

[clausmuus]

Hi,

es gibt nun neue Images und Pakete. Funktionell sollten die sich nicht von den bisherigen unterscheiden. Ich habe nur alles (mit aktuellen Sourcen) neu bauen lassen.
Selber bin ich noch nicht zum Testen gekommen.
Ein paar VDR Plugins fehlen noch. Die sind noch in Arbeit.

Claus

[gkd-berlin]

Hallo,

Test: MLD-4.0.0-rpi_rpi_2014.06.08-64.tar  vom 8.6.  14:26h

Beim 1. booten von der SD-Karte kommen die bekannten Fehlermeldungen für rpi-rtc und sysinfo.
Beim Herunterfahren nach 1. booten von der SD-Karte kommen keine Fehlermeldungen mehr.

Nach Installation auf Festplatte und 1. reboot

Code: [Select]

sysinit
Activate rtc:                failed


Code: [Select]

messages
Jan  1 00:02:31 (none) user.info kernel: [  152.125575] rtc-ds1307 1-0068: rtc core: registered ds1307 as rtc2
Jan  1 00:02:31 (none) user.info kernel: [  152.125652] rtc-ds1307 1-0068: 56 bytes nvram
Jan  1 00:02:31 (none) user.info kernel: [  152.125819] i2c i2c-1: new_device: Instantiated device ds1307 at 0x68
...
Jan  1 00:02:33 (none) daemon.err udevd[5266]: failed to execute '/lib/udev/usb-db' 'usb-db /devices/platform/bcm2708_usb/usb1/1-1/1-1.1/1-1.1:1.0/net/eth0': No such file or directory
Jan  1 00:02:33 (none) daemon.err udevd[5272]: failed to execute '/lib/udev/net.agent' 'net.agent': No such file or directory
Jan  1 00:02:34 (none) daemon.err udevd[5319]: failed to execute '/lib/udev/edd_id' 'edd_id --export /dev/sda': No such file or directory
Jan  1 00:02:34 (none) daemon.err udevd[5321]: failed to execute '/lib/udev/net.agent' 'net.agent': No such file or directoryDS1307 ist wieder da. udevd-Fehler, k.A. ob das wichtig ist.

Nach kopieren meiner .conf-Dateien, 2. reboot

Code: [Select]

sysinit
Activate rtc:           failed
....
Starting lirc daemon
ciniparser: cannot open /etc/lirc/lirc_options.conf
(ignored)
....
setup seems to hang! continue now...
Setting up setup menu:          done

Code: [Select]

messages
....
Jan  1 01:00:07 (none) user.info kernel: [    2.696653] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
....
Jun  9 16:26:26 (none) user.info kernel: [  434.821853] rtc-test rtc-test.0: test_rtc_set_mmss, secs = 1402323986
....Auch hier, k.A. ob das wichtig ist.

Putty:

Code: [Select]

MLD> date
Mo Jun  9 16:37:46 CEST 2014
MLD> hwclock
Mo 09 Jun 2014 14:37:54 CEST  0.000000 seconds
MLD> i2cdetect -y 1
Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory
MLD>
Fernsehen, Aufnahme, Wiedergabe und Fernbedienung funktionieren.

Gruß Gerhard

[gkd-berlin]

Hallo,

weitere Tests:

Der Raspi kann mit der FB in den Suspend-Mode geschickt werden. Nach Aufwachen mit der FB funktioniert die FB nicht mehr.

Vor Suspend

Code: [Select]

messages
....
Jan  1 01:00:07 (none) user.info kernel: [    1.938663] bcm2708_gpio: bcm2708_gpio_probe c076ded0
....
Jun 10 01:45:02 (none) user.info kernel: [   40.809840] lirc_dev: IR Remote Control driver registered, major 251
Jun 10 01:45:02 (none) user.info kernel: [   40.886922] lirc_dev: lirc_register_driver: sample_rate: 0
Jun 10 01:45:02 (none) user.info kernel: [   40.887902] lirc_rpi: driver registered!
Jun 10 01:45:03 (none) user.info kernel: [   41.843869] lirc_rpi: auto-detected active low receiver on GPIO pin 18
....


Nach Wiederaufwachen

Code: [Select]

sysinit
....
Loading lirc rpi gpio driver         done
Starting lirc daemon
ciniparser: cannot open /etc/lirc/lirc_options.conf
(ignored)

messages
....
Jan  1 01:00:07 (none) user.info kernel: [    1.938663] bcm2708_gpio: bcm2708_gpio_probe c076ded0
....
Jun 10 01:45:02 (none) user.info kernel: [   40.809840] lirc_dev: IR Remote Control driver registered, major 251
Jun 10 01:45:02 (none) user.info kernel: [   40.886922] lirc_dev: lirc_register_driver: sample_rate: 0
Jun 10 01:45:02 (none) user.info kernel: [   40.887902] lirc_rpi: driver registered!
Jun 10 01:45:03 (none) user.info kernel: [   41.843869] lirc_rpi: auto-detected active low receiver on GPIO pin 18

Gruß Gerhard

[gkd-berlin]

Hallo,

Test: MLD-4.0.0-rpi_rpi_2014.06.15-64.tar  vom 15.6.  11:47h

überhaupt keine Änderung gegenüber der Version:  MLD-4.0.0-rpi_rpi_2014.06.08-64.tar  vom 8.6.  14:26h.

An gleicher Stelle die gleichen Fehlermeldungen.

rpi-rtc blockiert die Installation von systeminfo, rpi-rtc failed, DS1307 wird nicht angesprochen, i2cdetect bringt Fehlermeldung.
Nach Aufwachen aus dem Suspend-Mode: Keine Reaktion auf die FB.

Gruß Gerhard

Nach Poweroff oder Reboot funktioniert die FB nicht.

Code: [Select]

sysinit:
....
Starting lirc daemon
ciniparser: cannot open /etc/lirc/lirc_options.conf
(ignored)done
....

messages:
....
Jun 16 02:00:20 (none) user.info kernel: [   76.463733] lirc_dev: IR Remote Control driver registered, major 251
Jun 16 02:00:20 (none) user.info kernel: [   76.477477] lirc_dev: lirc_register_driver: sample_rate: 0
Jun 16 02:00:20 (none) user.info kernel: [   76.481244] lirc_rpi: driver registered!
Jun 16 02:00:21 (none) user.info kernel: [   77.433844] lirc_rpi: auto-detected active low receiver on GPIO pin 18
....

[clausmuus]

Ich hab mir jetzt eine RTC bestellt. In 2-3 Wochen werd ich dann schauen können warum das nicht will.

Claus

[gkd-berlin]

Hallo Claus,

Du hast am Raspi keinen RTC. D. h., Du mußtest "blind" programmieren.
Schade, daß ich das nicht schon vorher wußte. Ich hätte Dir gerne eine für den RPI präparierte Tiny RTC geschickt.
Danke, daß Du es trotzdem versucht hast.
Ich werde mich bis dahin in Geduld üben und vielen Dank für Dein unermüdliches arbeiten, auch für ausgefallene Wünsche.

Meine Testhardware für den WakeUp-Controller ist soweit fertig. Wenn Du soweit bist, kann die Testerei losgehen.
Nur zur Vorwarnung.
Ich habe inzwischen mein Konzept etwas abgeändert.
Die Aufwachdaten sollen nicht mehr an I²C-Adr: 0x50 sondern direkt in den DS1307 in den freien Speicherbereich. I²C- Adr.: 0x68, z.B. ab Adr.: 10.
Am Besten im gleichen Format wie Datum und Zeit im DS1307 gespeichert sind.

Gruß Gerhard