Archiv > Development

lirc

<< < (4/8) > >>

Markus23:
Hi !

@P3f

Es sieht so aus, als ob erstmal alle Tasten richtig funktionierlen und das Prellen ist auch weg

@MegaX

k.A. ich kann nur sagen, welche Meldungen beim manuellen Start von eventlircd gekommen sind, und nachdem ich die o.g. evmaps angelegt hatte, lief es per manuellen Start von eventlircd UND dann auch beim normalen Start als service.
Deswegen meinte ich ja, da ist wohl das Abfangen bzw. ein Fallback nicht richtig aktiv.

P3f:
Hi,

Kannst Du mal bitte posten was nach Deinen Einstellungen beim "ir-keytable -r" ausgegeben wird?

Gruß,

Pit

Markus23:

Klar...


--- Code: ---scancode 0x800f0400 = KEY_0 (0x0b)
scancode 0x800f0401 = KEY_1 (0x02)
scancode 0x800f0402 = KEY_2 (0x03)
scancode 0x800f0403 = KEY_3 (0x04)
scancode 0x800f0404 = KEY_4 (0x05)
scancode 0x800f0405 = KEY_5 (0x06)
scancode 0x800f0406 = KEY_6 (0x07)
scancode 0x800f0407 = KEY_7 (0x08)
scancode 0x800f0408 = KEY_8 (0x09)
scancode 0x800f0409 = KEY_9 (0x0a)
scancode 0x800f040a = KEY_PROG1 (0x94)
scancode 0x800f040b = KEY_PROG2 (0x95)
scancode 0x800f040c = KEY_POWER2 (0x164)
scancode 0x800f040d = KEY_MENU (0x8b)
scancode 0x800f040e = KEY_MUTE (0x71)
scancode 0x800f040f = KEY_INFO (0x166)
scancode 0x800f0410 = KEY_VOLUMEUP (0x73)
scancode 0x800f0411 = KEY_VOLUMEDOWN (0x72)
scancode 0x800f0412 = KEY_CHANNELUP (0x192)
scancode 0x800f0413 = KEY_CHANNELDOWN (0x193)
scancode 0x800f0414 = KEY_FASTFORWARD (0xd0)
scancode 0x800f0415 = KEY_REWIND (0xa8)
scancode 0x800f0416 = KEY_PLAY (0xcf)
scancode 0x800f0417 = KEY_RECORD (0xa7)
scancode 0x800f0418 = KEY_PAUSE (0x77)
scancode 0x800f0419 = KEY_STOP (0x80)
scancode 0x800f041a = KEY_NEXT (0x197)
scancode 0x800f041b = KEY_PREVIOUS (0x19c)
scancode 0x800f041c = KEY_FAVORITES (0x16c)
scancode 0x800f041d = KEY_MODE (0x175)
scancode 0x800f041e = KEY_UP (0x67)
scancode 0x800f041f = KEY_DOWN (0x6c)
scancode 0x800f0420 = KEY_LEFT (0x69)
scancode 0x800f0421 = KEY_RIGHT (0x6a)
scancode 0x800f0422 = KEY_OK (0x160)
scancode 0x800f0423 = KEY_BACK (0x9e)
scancode 0x800f0424 = KEY_CHANNEL (0x16b)
scancode 0x800f0425 = KEY_SUBTITLE (0x172)
scancode 0x800f0426 = KEY_EPG (0x16d)
scancode 0x800f0446 = KEY_PROG3 (0xca)
scancode 0x800f0447 = KEY_AUDIO (0x188)
scancode 0x800f0448 = KEY_PVR (0x16e)
scancode 0x800f0449 = KEY_IMAGES (0x1ba)
scancode 0x800f044a = KEY_PVR (0x16e)
scancode 0x800f045a = KEY_TEXT (0x184)
scancode 0x800f045b = KEY_RED (0x18e)
scancode 0x800f045c = KEY_GREEN (0x18f)
scancode 0x800f045d = KEY_YELLOW (0x190)
scancode 0x800f045e = KEY_BLUE (0x191)
scancode 0x8011120d = KEY_MUTE (0x71)
scancode 0x80111210 = KEY_VOLUMEUP (0x73)
scancode 0x80111211 = KEY_VOLUMEDOWN (0x72)
scancode 0x80115200 = KEY_0 (0x0b)
scancode 0x80115201 = KEY_1 (0x02)
scancode 0x80115202 = KEY_2 (0x03)
scancode 0x80115203 = KEY_3 (0x04)
scancode 0x80115204 = KEY_4 (0x05)
scancode 0x80115205 = KEY_5 (0x06)
scancode 0x80115206 = KEY_6 (0x07)
scancode 0x80115207 = KEY_7 (0x08)
scancode 0x80115208 = KEY_8 (0x09)
scancode 0x80115209 = KEY_9 (0x0a)
scancode 0x8011520a = KEY_PREVIOUS (0x19c)
scancode 0x8011520b = KEY_CHANNEL (0x16b)
scancode 0x8011520c = KEY_POWER2 (0x164)
scancode 0x8011521e = KEY_CHANNELUP (0x192)
scancode 0x8011521f = KEY_CHANNELDOWN (0x193)
scancode 0x80115220 = KEY_NEXT (0x197)
scancode 0x80115221 = KEY_PREVIOUS (0x19c)
scancode 0x80115228 = KEY_FASTFORWARD (0xd0)
scancode 0x80115229 = KEY_REWIND (0xa8)
scancode 0x8011522c = KEY_PLAY (0xcf)
scancode 0x80115230 = KEY_PAUSE (0x77)
scancode 0x80115231 = KEY_STOP (0x80)
scancode 0x80115237 = KEY_RECORD (0xa7)
scancode 0x80115254 = KEY_SETUP (0x8d)
scancode 0x80115255 = KEY_BACK (0x9e)
scancode 0x80115256 = KEY_PROG1 (0x94)
scancode 0x80115258 = KEY_UP (0x67)
scancode 0x80115259 = KEY_DOWN (0x6c)
scancode 0x8011525a = KEY_LEFT (0x69)
scancode 0x8011525b = KEY_RIGHT (0x6a)
scancode 0x8011525c = KEY_OK (0x160)
scancode 0x80115281 = KEY_INFO (0x166)
scancode 0x8011528b = KEY_MODE (0x175)
scancode 0x80115292 = KEY_SUBTITLE (0x172)
scancode 0x80115293 = KEY_TIME (0x167)
scancode 0x801152a0 = KEY_PVR (0x16e)
scancode 0x801152a1 = KEY_MENU (0x8b)
scancode 0x801152a2 = KEY_PROG4 (0xcb)
scancode 0x801152ab = KEY_FAVORITES (0x16c)
scancode 0x801152ac = KEY_PROG3 (0xca)
scancode 0x801152cc = KEY_EPG (0x16d)
scancode 0x801152d5 = KEY_TEXT (0x184)
scancode 0x801152e1 = KEY_PROG2 (0x95)
scancode 0x801152e4 = KEY_RED (0x18e)
scancode 0x801152e5 = KEY_GREEN (0x18f)
scancode 0x801152e6 = KEY_YELLOW (0x190)
scancode 0x801152e7 = KEY_BLUE (0x191)

--- End code ---

P3f:
Und ohne Parameter?

Markus23:
Hier...


--- Code: ---MLD> ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event2) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO other
Enabled protocols: RC-6
Repeat delay = 500 ms, repeat period = 125 ms

--- End code ---

Navigation

[0] Message Index

[#] Next page

[*] Previous page