Archiv > Development

lirc

<< < (2/8) > >>

Markus23:
@Pit:

Habe gerade mal ne aktuelle 4.0.0 custom Devel-CD gezogen und von gebootet.
FB geht immer noch nicht, bzw. nur hoch/runter mit massig Prellen drin.

Hier mal die gewünschten Ausgaben/Logs:


--- Code: ---MLD> lsusb
Bus 001 Device 002: ID 8087:0024
Bus 002 Device 002: ID 8087:0024
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 001 Device 003: ID 147a:e042
Bus 002 Device 003: ID 058f:6387
Bus 002 Device 004: ID 04f3:0103

MLD> dmesg | grep -i formosa
hid-generic 0003:147A:E042.0001: hiddev0: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-0000:00:1a.0-1.1/input1
mceusb 1-1.1:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 2

MLD> modinfo mceusb
filename:       kernel/drivers/media/rc/mceusb.ko
license:        GPL
author:         Jarod Wilson <jarod@redhat.com>
description:    Windows Media Center Ed. eHome Infrared Transceiver device driver
alias:          usb:v2040pB130d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2596p8016d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0572p58A5d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v105Ap2000d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v185Bp3082d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0FB8p0002d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2304p0225d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1934p0602d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE042d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE03Cd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE018d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE016d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v045Ep00A0d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1509p9242d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v179Dp0010d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p000Ad*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p0007d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p0001d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v107Bp3009d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1308pC001d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p0353d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p0334d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p031Dd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p2093d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p206Cd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p0613d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p060Dd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p0608d*dc*dsc*dp*ic*isc*ip*in*
depends:        rc-core
vermagic:       3.13.5.35 SMP mod_unload modversions 686

MLD> cat /proc/bus/input/devices

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0003 Vendor=04f3 Product=0103 Version=0110
N: Name="HID 04f3:0103"
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=04f3 Product=0103 Version=0110
N: Name="HID 04f3:0103"
P: Phys=usb-0000:00:1d.0-1.2/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input6
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=1f
B: KEY=4837fff 72ff32d bf544446 0 0 1 20c10 b17c000 267bfa d941dfed 9e1680 4400 0 10000002
B: REL=40
B: ABS=1 0
B: MSC=10

I: Bus=0003 Vendor=147a Product=e042 Version=1101
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (147a:e042)"
P: Phys=usb-0000:00:1a.0-1.1
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0/input7
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=100013
B: KEY=4000000 108fc110 2478d1 0 0 0 0 18c00 180 40302801 8e1680 0 0 ffc
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (mceusb)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input8
U: Uniq=
H: Handlers=kbd mouse0 event5
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10

MLD> ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event4) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-6
Repeat delay = 500 ms, repeat period = 125 ms

--- End code ---


Ich hoffe es hilft was ....

bernd-1856:
Bei mir auch keine Änderung nach dem Update heute Abend!


--- Code: ---MLD> lsusb
Bus 001 Device 002: ID 14f7:0500
Bus 001 Device 003: ID 14f7:0500
Bus 001 Device 007: ID 13fe:4100
Bus 003 Device 002: ID 1908:0102
Bus 003 Device 003: ID 0471:060d
Bus 004 Device 002: ID 1d57:ac01
Bus 005 Device 002: ID 1241:1603
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
MLD>

MLD> dmesg | grep -i formosa
MLD>

MLD> modinfo mceusb
filename:       kernel/drivers/media/rc/mceusb.ko
license:        GPL
author:         Jarod Wilson <jarod@redhat.com>
description:    Windows Media Center Ed. eHome Infrared Transceiver device driver
alias:          usb:v2040pB130d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2596p8016d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0572p58A5d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v105Ap2000d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v185Bp3082d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0FB8p0002d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2304p0225d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1934p0602d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE042d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE03Cd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE018d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v147ApE016d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v045Ep00A0d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1509p9242d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v179Dp0010d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p000Ad*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p0007d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1784p0001d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v107Bp3009d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1308pC001d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p0353d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p0334d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0609p031Dd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p2093d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p206Cd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p0613d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p060Dd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0471p0608d*dc*dsc*dp*ic*isc*ip*in*
depends:        rc-core
vermagic:       3.13.5.35 SMP mod_unload modversions 686
MLD>

MLD> cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0003 Vendor=1d57 Product=ac01 Version=0110
N: Name="Mouse"
P: Phys=usb-0000:00:13.2-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=1d57 Product=ac01 Version=0110
N: Name="Mouse"
P: Phys=usb-0000:00:13.2-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.1/input/input5
U: Uniq=
H: Handlers=kbd mouse0 event4
B: PROP=0
B: EV=1f
B: KEY=4c37fff 72ff32d bf544446 0 0 1f0001 20c10 b17c000 267bfa d951dfed 9e1680 4400 0 10000002
B: REL=143
B: ABS=7f01 0
B: MSC=10

I: Bus=0003 Vendor=1241 Product=1603 Version=0110
N: Name="  USB Keyboard"
P: Phys=usb-0000:00:13.3-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2:1.0/input/input6
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=1241 Product=1603 Version=0110
N: Name="  USB Keyboard"
P: Phys=usb-0000:00:13.3-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2:1.1/input/input7
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=13
B: KEY=2000000 39fa d941d001 1e0000 0 0 0
B: MSC=10

I: Bus=0003 Vendor=0471 Product=060d Version=0101
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (0471:060d)"
P: Phys=usb-0000:00:13.1-2
S: Sysfs=/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/rc/rc0/input8
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=100013
B: KEY=4000000 108fc110 2478d1 0 0 0 0 18c00 180 40302801 8e1680 0 0 ffc
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (mceusb)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input9
U: Uniq=
H: Handlers=kbd mouse1 event8
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=14f7 Product=0500 Version=0001
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:13.5-1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:13.5/usb1/1-1/rc/rc1/input10
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=100013
B: KEY=fc210 2012441 0 0 0 0 0 2000 c01 1e0000 0 0 10000ffc
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (technisat-usb2)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input11
U: Uniq=
H: Handlers=kbd mouse2 event10
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=14f7 Product=0500 Version=0001
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:13.5-2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:13.5/usb1/1-2/rc/rc2/input12
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=100013
B: KEY=fc210 2012441 0 0 0 0 0 2000 c01 1e0000 0 0 10000ffc
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (technisat-usb2)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input13
U: Uniq=
H: Handlers=kbd mouse3 event12
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10


MLD> ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event7) with:
        Driver mceusb, table rc-rc6-mce
        Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO other
        Enabled protocols: RC-6
        Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc1/ (/dev/input/event9) with:
        Driver technisat-usb2, table rc-technisat-usb2
        Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO other
        Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO other
        Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc2/ (/dev/input/event11) with:
        Driver technisat-usb2, table rc-technisat-usb2
        Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO other
        Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO other
        Repeat delay = 500 ms, repeat period = 125 ms
MLD>

--- End code ---

Mein Empfänger der mit der 3.0.3 ohne etwas einzustellen funktioniert:
http://www.cohaus-berlin.de/shop/RC6-Infrarot-Empfaenger/Philips-RC6-Infrarot-Empfaenger-Modell-OVU411000::11.html

mfg. bernd

P3f:
Hi Bernd,

wir hatten heute die Möglichkeit auf der Maschine von Markus23 ein paar Erkenntnisse zu bekommen. Diese werden nun ins System eingearbeitet.

Bitte ein klein wenig Geduld, es wird wieder funktionieren.  ;D

Gruß,

Pit

bernd-1856:
Guten Abend zusammen,

vielen Dank für die Info und nur keine Eile - die 3.0.3 läuft ja ohne Probleme !

Bernd

Markus23:
Hi !

Habe gerade , wie am Mittwoch besprochen, einen FB-Test mit meinem MCE-Empfänger gemacht.

4.0.0 Standard-SHD gebootet -> wieder nur hoch/runter & rechts/links mit Prellen
Installiert auf HD -> weiterhin nur hoch/runter & rechts/links

per ssh gecheckt ob eventlircd läuft: JA
per evtest gecheckt ob FB-Tasten alle erkannt werden: JA
per ps | grep lirc gecheckt was läuft:  eventlircd läuft allerdings mit --socket=/var/run/lirc/lircd , da gibts aber kein Datei/Socket !

Woran kann das liegen, bzw. wie kann ich noch weiter vorgehen ?


Gruß,

Markus


PS: das lirc Paket ist auch installiert, wenn ich aber sage "start lirc" wird nur wieder eventlirc gestartet....

Navigation

[0] Message Index

[#] Next page

[*] Previous page