Hallo,
die TerraTec Cinergy S2 USB wird nicht erkannt. Ich benutze das MLD-4.0.0-rpi_server_2014.03.29-51 Image und habe eine TerraTec Cinergy S2 USB angeschlossen. Das Problem liegt allerdings schon am USB, ich habe folgende Dinge bereits ausprobiert:
Netzteil am RasPi 5 Volt 1200mA kein USB Hub --> geht nicht
Netzteil am RasPi 5 Volt 1200mA mit aktivem USB Hub --> geht nicht
Netzteil am RasPi I-TEC 5 Volt 2100mA kein USB Hub --> geht nicht
Netzteil am RasPi I-TEC 5 Volt 2100mA mit aktivem USB Hub --> geht nicht
Mit I-Tec Netzteil ohne Hub sagt dmesg
MLD> dmesg | grep usb
[ 1.607052] usbcore: registered new interface driver usbfs
[ 1.607462] usbcore: registered new interface driver hub
[ 1.607986] usbcore: registered new device driver usb
[ 1.918158] usbcore: registered new interface driver ax88179_178a
[ 1.918652] usbcore: registered new interface driver smsc95xx
[ 1.919250] usbcore: registered new interface driver cdc_ncm
[ 2.320020] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.320071] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.320139] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.320489] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.320513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.320529] usb usb1: Product: DWC OTG Controller
[ 2.320544] usb usb1: Manufacturer: Linux 3.13.2.37 dwc_otg_hcd
[ 2.320558] usb usb1: SerialNumber: bcm2708_usb
[ 2.323894] usbcore: registered new interface driver usb-storage
[ 2.393650] usbcore: registered new interface driver usbhid
[ 2.393676] usbhid: USB HID core driver
[ 2.692853] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.913504] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.913537] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.193145] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.293690] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.293721] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.358285] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2c:c0:30
[ 3.453053] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 18.532982] usb 1-1.2: device descriptor read/64, error -110
[ 33.723249] usb 1-1.2: device descriptor read/64, error -110
[ 33.913111] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[ 48.993006] usb 1-1.2: device descriptor read/64, error -110
[ 64.182959] usb 1-1.2: device descriptor read/64, error -110
[ 64.372967] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 69.392839] usb 1-1.2: device descriptor read/8, error -110
[ 74.522832] usb 1-1.2: device descriptor read/8, error -110
[ 74.712993] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 79.732832] usb 1-1.2: device descriptor read/8, error -110
[ 84.862832] usb 1-1.2: device descriptor read/8, error -110
Mit I-Tec Netzteil und Hub
MLD> dmesg | grep usb
[ 1.607055] usbcore: registered new interface driver usbfs
[ 1.607470] usbcore: registered new interface driver hub
[ 1.607996] usbcore: registered new device driver usb
[ 1.918228] usbcore: registered new interface driver ax88179_178a
[ 1.918724] usbcore: registered new interface driver smsc95xx
[ 1.919320] usbcore: registered new interface driver cdc_ncm
[ 2.320042] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.320094] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.320163] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.320511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.320534] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.320551] usb usb1: Product: DWC OTG Controller
[ 2.320565] usb usb1: Manufacturer: Linux 3.13.2.37 dwc_otg_hcd
[ 2.320578] usb usb1: SerialNumber: bcm2708_usb
[ 2.323908] usbcore: registered new interface driver usb-storage
[ 2.393683] usbcore: registered new interface driver usbhid
[ 2.393709] usbhid: USB HID core driver
[ 2.692891] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.913986] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.914018] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.193165] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.293664] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.293697] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.371899] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2c:c0:30
[ 3.462912] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 3.563943] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
[ 3.563972] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.563989] usb 1-1.3: Product: USB 2.0 Hub [MTT]
[ 3.842961] usb 1-1.3.4: new high-speed USB device number 5 using dwc_otg
[ 18.923024] usb 1-1.3.4: device descriptor read/64, error -110
[ 34.112957] usb 1-1.3.4: device descriptor read/64, error -110
[ 34.302977] usb 1-1.3.4: new high-speed USB device number 6 using dwc_otg
[ 49.383034] usb 1-1.3.4: device descriptor read/64, error -110
[ 64.572969] usb 1-1.3.4: device descriptor read/64, error -110
[ 64.763007] usb 1-1.3.4: new high-speed USB device number 7 using dwc_otg
[ 69.782847] usb 1-1.3.4: device descriptor read/8, error -110
[ 74.912883] usb 1-1.3.4: device descriptor read/8, error -110
[ 75.103030] usb 1-1.3.4: new high-speed USB device number 8 using dwc_otg
[ 80.122852] usb 1-1.3.4: device descriptor read/8, error -110
[ 85.252863] usb 1-1.3.4: device descriptor read/8, error -110
Am selben RasPi funktioniert eine TECHNOTREND TT-connect S2-3600 USB HDTV mit beiden Netzteilen sowohl mit, als auch ohne USB-Hub. Kann also eigentlich nicht am Netzteil oder Hub liegen.
Hat jemand eine Idee oder sogar eine mit der 4er Version laufen?
Gruß headless