1 ... 12 13 [14] 15 16 ... 19 >>> Archiv / MLD 4.x / Development / Test MLD-4.0.1-64 ISO
 

Offline dodger

  • Newbie
  • *
  • Posts: 32
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #195 on: July 15, 2014, 22:41:38 »
Thank you Claus! After latest packages update and installing skincurses i don't have any errors.
I remove the module in /etc/modules too...

cheers
Asrok A330 (ION 1), 2GB, Sat Tuner TBS QBOXS3, TV Panasonic TX-P50ST50, MLD 4.0.1-64

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #196 on: July 15, 2014, 23:47:16 »
Hallo,

da ich zwischendurch das suspend am RPI getestet habe, war dieses System ausgeschaltet.

Nach einem Kaltstart hängt wieder die Anzeige "Webif IP" auf dem GLCD. FB: Keine Reaktion.

In der Sysinit:
Code: [Select]
vdr-plugin-opkg seems to hang! continue now...
webserver seems to hang! continue now...

In der messages:
Code: [Select]
/var/log/messages

Jul 16 03:11:15 (MLD) daemon.info kernel: systemd-udevd[322]: starting version 204
Jul 16 03:11:15 (MLD) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jul 16 03:11:15 (MLD) user.warn kernel: r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
Jul 16 03:11:15 (MLD) user.debug kernel: r8169 0000:01:00.0: irq 40 for MSI/MSI-X
Jul 16 03:11:15 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: RTL8102e at 0xffffc90000012000, 20:cf:30:e9:5b:f2, XID 04c00000 IRQ 40
Jul 16 03:11:16 (MLD) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jul 16 03:11:16 (MLD) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Jul 16 03:11:16 (MLD) user.err kernel: enough quality for its usage in production.
Jul 16 03:11:16 (MLD) user.err kernel: Use it with care.
Jul 16 03:11:16 (MLD) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jul 16 03:11:16 (MLD) user.err kernel: 5ea878796f0a1d9649fe43a6a09df53d3915c0ef [media] V4L2: soc_camera: Add run-time dependencies to sh_mobile drivers
Jul 16 03:11:16 (MLD) user.err kernel: 52e1473a58b6ea5d9b4ea3d4a0af8b59166aab42 [media] media: mx2_camera: Change Kconfig dependency
Jul 16 03:11:16 (MLD) user.err kernel: 58be734f53089525224abc2e8ef75d1e9574a423 [media] media: mx1_camera: Remove driver
Jul 16 03:11:16 (MLD) user.err kernel: experimental: 6b80c09034037d2c380775dadf6b84152f8e3d72 experimental: Revert: Add patch for broken 'make menuconfig' - fix is upstream now.
Jul 16 03:11:16 (MLD) user.err kernel: v4l-dvb-saa716x: 432762831b67a456254fd291f4921e8ed75ae43b saa716x_ff: Optimize access to FIFO.
Jul 16 03:11:17 (MLD) user.info kernel: SAA716x FF FPGA version 1.10
Jul 16 03:11:17 (MLD) user.info kernel: SAA716x FF loader version 1.03
Jul 16 03:11:17 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:18 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:18 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte01.glcd' loaded.
Jul 16 03:11:18 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Jul 16 03:11:18 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Jul 16 03:11:18 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
Jul 16 03:11:18 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Jul 16 03:11:18 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Jul 16 03:11:18 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
Jul 16 03:11:19 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:19 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:19 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte03.glcd' loaded.
Jul 16 03:11:19 (MLD) user.info kernel: SAA716x FF firmware version 0.4.1
Jul 16 03:11:19 (MLD) user.info kernel: input: TT6400 DVB IR receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/input/input3
Jul 16 03:11:20 (MLD) user.info kernel: fuse init (API version 7.23)
Jul 16 03:11:20 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:20 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:20 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte05.glcd' loaded.
Jul 16 03:11:21 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:21 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:21 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte05.glcd' loaded.
Jul 16 03:11:22 (MLD) user.notice kernel: XFS (sda2): Mounting V4 Filesystem
Jul 16 03:11:22 (MLD) user.info kernel: XFS (sda2): Ending clean mount
Jul 16 03:11:23 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:23 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:23 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte07.glcd' loaded.
Jul 16 03:11:24 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:24 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:24 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte07.glcd' loaded.
Jul 16 03:11:25 (MLD) user.info vdr: [774] VDR version 2.1.6 started
Jul 16 03:11:25 (MLD) user.info vdr: [774] switched to user 'root'
Jul 16 03:11:25 (MLD) user.info vdr: [774] codeset is 'UTF-8' - known
Jul 16 03:11:25 (MLD) user.debug vdr: [774] found 28 locales in /usr/share/locale
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-clock.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-devstatus.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-dvbhddevice.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-extrecmenu.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-femon.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-graphlcd.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-opkg.so.2.1.6
Jul 16 03:11:25 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-osdpip.so.2.1.6
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-remote.so.2.1.6
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-setup.so.2.1.6
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-streamdev-server.so.2.1.6
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading plugin: /usr/lib/vdr/libvdr-tvguide.so.2.1.6
Jul 16 03:11:26 (MLD) user.err vdr: [774] tvguide: Logo Path set to /var/cache/vdr/channellogos/
Jul 16 03:11:26 (MLD) user.err vdr: [774] tvguide: EPG Image Path set to /var/cache/vdr/epgimages/
Jul 16 03:11:26 (MLD) user.err vdr: [774] tvguide: Icon Path set to /etc/vdr/plugins/tvguide/icons/
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/setup.conf
Jul 16 03:11:26 (MLD) user.err vdr: [774] ERROR: unknown config parameter: graphlcd.ReplayLogo = 1
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/sources.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/diseqc.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/scr.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/channels.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/timers.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/reccmds.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/svdrphosts.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/remote.conf
Jul 16 03:11:26 (MLD) user.info vdr: [774] loading /etc/vdr/keymacros.conf
Jul 16 03:11:26 (MLD) user.debug vdr: [791] video directory scanner thread started (pid=774, tid=791, prio=high)
Jul 16 03:11:26 (MLD) user.debug vdr: [774] registered source parameters for 'A - ATSC'
Jul 16 03:11:26 (MLD) user.debug vdr: [774] registered source parameters for 'C - DVB-C'
Jul 16 03:11:26 (MLD) user.debug vdr: [774] registered source parameters for 'S - DVB-S'
Jul 16 03:11:26 (MLD) user.debug vdr: [774] registered source parameters for 'T - DVB-T'
Jul 16 03:11:26 (MLD) user.debug vdr: [793] epg data reader thread started (pid=774, tid=793, prio=high)
Jul 16 03:11:26 (MLD) user.debug vdr: [774] probing /dev/dvb/adapter0/frontend0
Jul 16 03:11:26 (MLD) user.debug vdr: [793] reading EPG data from /var/cache/vdr/epg.data
Jul 16 03:11:26 (MLD) user.debug vdr: [792] video directory scanner thread started (pid=774, tid=792, prio=high)
Jul 16 03:11:26 (MLD) user.debug vdr: [774] creating cDvbHdFfDevice
Jul 16 03:11:26 (MLD) user.debug vdr: [774] new device number 1
Jul 16 03:11:26 (MLD) user.info vdr: [774] DVB API version is 0x050A (VDR was built with 0x050A)
Jul 16 03:11:26 (MLD) user.info vdr: [774] frontend 0/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jul 16 03:11:26 (MLD) user.debug vdr: [795] tuner on frontend 0/0 thread started (pid=774, tid=795, prio=high)
Jul 16 03:11:26 (MLD) user.debug vdr: [774] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Jul 16 03:11:26 (MLD) user.debug vdr: [795] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Jul 16 03:11:26 (MLD) user.debug vdr: [796] section handler thread started (pid=774, tid=796, prio=low)
Jul 16 03:11:26 (MLD) user.debug vdr: [774] probing /dev/dvb/adapter1/frontend0
Jul 16 03:11:26 (MLD) user.debug vdr: [774] creating cDvbDevice
Jul 16 03:11:26 (MLD) user.debug vdr: [774] new device number 2
Jul 16 03:11:26 (MLD) user.info vdr: [774] frontend 1/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jul 16 03:11:26 (MLD) user.debug vdr: [798] tuner on frontend 1/0 thread started (pid=774, tid=798, prio=high)
Jul 16 03:11:26 (MLD) user.info vdr: [774] found 2 DVB devices
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: clock (1.0.0): A Simple Clock
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: devstatus (0.4.1): DVB-Gerätestatus
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: dvbhddevice (2.1.6): HD Full Featured DVB device
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: extrecmenu (1.2.3-git): Erweitertes Aufzeichnungs-Menü
Jul 16 03:11:26 (MLD) user.debug vdr: [799] section handler thread started (pid=774, tid=799, prio=low)
Jul 16 03:11:26 (MLD) user.debug vdr: [792] video directory scanner thread ended (pid=774, tid=792)
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: femon (2.1.1-GIT-0-90-g5c539e6): DVB Signal Informationsanzeige (OSD)
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: graphlcd (0.3.0): Ausgabe auf einem Grafik-LCD
Jul 16 03:11:26 (MLD) user.info vdr: [774] graphlcd plugin: INFO: No config file specified, using default (/etc/graphlcd.conf).
Jul 16 03:11:26 (MLD) user.debug vdr: [774] graphlcd plugin: DEBUG: Init timeout waiting for display serdisp thread to get ready
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: opkg (0.1.0): Pakete verwalten
Jul 16 03:11:26 (MLD) user.debug vdr: [800] glcd_display thread started (pid=774, tid=800, prio=high)
Jul 16 03:11:26 (MLD) user.debug vdr: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 16 03:11:26 (MLD) user.info vdr: [774] initializing plugin: osdpip (0.1.2): OSD Bild-in-Bild
Jul 16 03:11:26 (MLD) user.info vdr: serdisp: SerDisp with sdcmegtron initialized.
Jul 16 03:11:27 (MLD) user.info vdr: [774] initializing plugin: remote (0.4.0): Fernbedienung
Jul 16 03:11:27 (MLD) user.info vdr: [774] initializing plugin: setup (0.3.1-zulu-edition): System Setup
Jul 16 03:11:27 (MLD) user.info vdr: [774] initializing plugin: streamdev-server (0.6.1-git): VDR Streaming Server
Jul 16 03:11:27 (MLD) user.info vdr: [774] initializing plugin: tvguide (1.2.2): A fancy 2d EPG Viewer
Jul 16 03:11:27 (MLD) user.info vdr: [774] loading /etc/vdr/themes/tvguide-blue.theme
Jul 16 03:11:27 (MLD) user.err vdr: [774] tvguide: set Theme to blue
Jul 16 03:11:27 (MLD) user.err vdr: [774] tvguide: set magick blending style
Jul 16 03:11:27 (MLD) user.err vdr: [774] tvguide: Set OSD to 1784 x 1004 px
Jul 16 03:11:27 (MLD) user.debug vdr: [791] video directory scanner thread ended (pid=774, tid=791)
Jul 16 03:11:27 (MLD) user.debug vdr: [793] epg data reader thread ended (pid=774, tid=793)
Jul 16 03:11:27 (MLD) user.err vdr: [774] tvguide: Set Font to VDRSymbols Sans:Book
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/symbols/empty.pbm' loaded.
Jul 16 03:11:27 (MLD) user.info vdr: [774] setting primary device to 1
Jul 16 03:11:27 (MLD) user.debug vdr: [774] assuming manual start of VDR
Jul 16 03:11:27 (MLD) user.info vdr: [774] SVDRP listening on port 6419
Jul 16 03:11:27 (MLD) user.info vdr: [774] setting current skin to "sttng"
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/logos/channels/_l.glcd' loaded.
Jul 16 03:11:27 (MLD) user.info vdr: [774] loading /etc/vdr/themes/sttng-default.theme
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: clock
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: devstatus
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: dvbhddevice
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: extrecmenu
Jul 16 03:11:27 (MLD) user.debug vdr: [803] extrecmenu worker thread thread started (pid=774, tid=803, prio=high)
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: femon
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: graphlcd
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: opkg
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: osdpip
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: remote
Jul 16 03:11:27 (MLD) user.debug vdr: [774] remote: using '/dev/input/ir'
Jul 16 03:11:27 (MLD) user.debug vdr: [774] remote-ir: autorepeat supported
Jul 16 03:11:27 (MLD) user.debug vdr: [774] remote-ir: exclusive access granted
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: setup
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: streamdev-server
Jul 16 03:11:27 (MLD) user.info vdr: [774] loading /etc/vdr/plugins/streamdev-server/streamdevhosts.conf
Jul 16 03:11:27 (MLD) user.info vdr: [774] starting plugin: tvguide
Jul 16 03:11:27 (MLD) user.debug vdr: [805] streamdev server thread started (pid=774, tid=805, prio=high)
Jul 16 03:11:27 (MLD) user.info vdr: [805] Streamdev: Listening (VTP) on port 2004
Jul 16 03:11:27 (MLD) user.debug vdr: [774] remote control remote-ir - keys known
Jul 16 03:11:27 (MLD) user.debug vdr: [774] remote control KBD - keys known
Jul 16 03:11:27 (MLD) user.info vdr: [805] Streamdev: Listening (HTTP) on port 3000
Jul 16 03:11:27 (MLD) user.info vdr: [774] switching to channel 4
Jul 16 03:11:27 (MLD) user.debug vdr: [806] KBD remote control thread started (pid=774, tid=806, prio=high)
Jul 16 03:11:27 (MLD) user.debug vdr: [774] setting watchdog timer to 60 seconds
Jul 16 03:11:27 (MLD) user.debug vdr: [774] OSD size changed to 1920x1080 @ 1
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/logos/channels/SAT.1_l.glcd' loaded.
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/symbols/teletext.pbm' loaded.
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/symbols/dolby.pbm' loaded.
Jul 16 03:11:27 (MLD) user.info vdr: [774] timer 1 (6 0255-0340 'RTL Nachtjournal') set to event Mit 16.07.2014 03:05-03:30 'RTL Nachtjournal'
Jul 16 03:11:27 (MLD) user.debug vdr: [774] switching device 2 to channel 6
Jul 16 03:11:27 (MLD) user.info vdr: [774] timer 1 (6 0255-0340 'RTL Nachtjournal') start
Jul 16 03:11:27 (MLD) user.debug vdr: [774] Title: 'RTL Nachtjournal' Subtitle: '(null)'
Jul 16 03:11:27 (MLD) user.info vdr: [774] executing '/etc/vdr/recording.d/rc.action before "/data/tv/RTL_Nachtjournal/2014-07-16.02.55.6-0.rec"'
Jul 16 03:11:27 (MLD) user.info vdr: [774] record /data/tv/RTL_Nachtjournal/2014-07-16.02.55.6-0.rec
Jul 16 03:11:27 (MLD) user.debug vdr: [774] cFileName::SetOffset: removing zero-sized file /data/tv/RTL_Nachtjournal/2014-07-16.02.55.6-0.rec/00001.ts
Jul 16 03:11:27 (MLD) user.debug vdr: [774] recording to '/data/tv/RTL_Nachtjournal/2014-07-16.02.55.6-0.rec/00001.ts'
Jul 16 03:11:27 (MLD) user.debug vdr: [816] recording thread started (pid=774, tid=816, prio=high)
Jul 16 03:11:27 (MLD) user.debug vdr: [817] receiver on device 2 thread started (pid=774, tid=817, prio=high)
Jul 16 03:11:27 (MLD) user.debug vdr: [818] TS buffer on device 2 thread started (pid=774, tid=818, prio=high)
Jul 16 03:11:27 (MLD) user.debug vdr: [774] graphlcd plugin: DEBUG: Display thread for serdisp is ready
Jul 16 03:11:27 (MLD) user.debug vdr: [774] max. latency time 1 seconds
Jul 16 03:11:27 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/symbols/recording.pbm' loaded.
Jul 16 03:11:28 (MLD) user.info vdr: [816] executing '/etc/vdr/recording.d/rc.action started "/data/tv/RTL_Nachtjournal/2014-07-16.02.55.6-0.rec"'
Jul 16 03:11:29 (MLD) user.info vdr: [774] retuning due to modification of channel 4
Jul 16 03:11:29 (MLD) user.info vdr: [774] switching to channel 4
Jul 16 03:11:29 (MLD) user.info vdr: [774] connect from 127.0.0.1, port 40620 - accepted
Jul 16 03:11:29 (MLD) user.info vdr: [774] closing SVDRP connection
Jul 16 03:11:29 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link down
Jul 16 03:11:29 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 16 03:11:29 (MLD) user.info vdr: [799] channel 6 (RTL Television) event Die 15.07.2014 23:10-00:00 '(null)' status 4
Jul 16 03:11:31 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link up
Jul 16 03:11:31 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 16 03:11:33 (MLD) user.debug vdr: [1254] video directory scanner thread started (pid=774, tid=1254, prio=high)
Jul 16 03:11:33 (MLD) user.debug vdr: [1254] video directory scanner thread ended (pid=774, tid=1254)
Jul 16 03:11:33 (MLD) user.debug vdr: [1253] video directory scanner thread started (pid=774, tid=1253, prio=high)
Jul 16 03:11:33 (MLD) user.debug vdr: [1253] video directory scanner thread ended (pid=774, tid=1253)
Jul 16 03:11:34 (MLD) user.info vdr: [774] connect from 127.0.0.1, port 40623 - accepted
Jul 16 03:11:34 (MLD) user.info vdr: [774] confirm: Das Webinterface ist über http://192.168.2.100 erreichbar.
Jul 16 03:11:34 (MLD) user.info vdr: [774] warning: Das Webinterface ist über http://192.168.2.100 erreichbar.
Jul 16 03:11:34 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/images/message.pbm' loaded.
Jul 15 23:34:04 (MLD) user.err vdr: [774] PANIC: watchdog timer expired - exiting!
Jul 15 23:34:04 (MLD) user.debug vdr: [806] KBD remote control thread ended (pid=774, tid=806)

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #197 on: July 16, 2014, 00:11:01 »
Hallo,

Nach Ausschalten mit der Powertaste am Rechner und Kaltstart, sind mal wieder alle Kanäle weg. Kein Bild + Ton.

Code: [Select]
/var/log/sysinit

Starting graphlcd-base
done
Setting up localhost:
done
Initialisation wakeup:
done
Setting timezone:
done
Load keymap: de-latin1
done

Starting udev Daemon
done
Turn on DMA:
Load preselected kernel modules:
done
Checking filesystems:
done
Mounting filesystems:
done
Move cache to data device:
done




Starting VDR
done
Starting acpid
done




Setting up storage devices
done
Starting devmon
done

Starting nmbd:
done
Starting smbd:
done
Init networking
Starting DHCP-client
done
Starting ntp-client
done
Starting ssh:
Listen on IP: 192.168.2.100
done

Starting webserver:
done

Code: [Select]
/var/log/messages

Jul 15 23:55:32 (MLD) user.info kernel: SAA716x FF FPGA version 1.10
Jul 15 23:55:32 (MLD) user.info kernel: SAA716x FF loader version 1.03
Jul 15 23:55:33 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Jul 15 23:55:33 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:33 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Jul 15 23:55:33 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
Jul 15 23:55:33 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Jul 15 23:55:33 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Jul 15 23:55:33 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
Jul 15 23:55:33 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:33 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte01.glcd' loaded.
Jul 15 23:55:34 (MLD) user.info kernel: SAA716x FF firmware version 0.4.1
Jul 15 23:55:34 (MLD) user.info kernel: input: TT6400 DVB IR receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/input/input3
Jul 15 23:55:34 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:35 (MLD) user.info kernel: fuse init (API version 7.23)
Jul 15 23:55:35 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:35 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte04.glcd' loaded.
Jul 15 23:55:36 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:36 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:36 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte05.glcd' loaded.
Jul 15 23:55:37 (MLD) user.notice kernel: XFS (sda2): Mounting V4 Filesystem
Jul 15 23:55:37 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:37 (MLD) user.notice kernel: XFS (sda2): Starting recovery (logdev: internal)
Jul 15 23:55:37 (MLD) user.notice kernel: XFS (sda2): Ending recovery (logdev: internal)
Jul 15 23:55:37 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:37 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte05.glcd' loaded.
Jul 15 23:55:38 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:38 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:38 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte07.glcd' loaded.
Jul 15 23:55:40 (MLD) user.debug showpic: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:40 (MLD) user.info showpic: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:40 (MLD) user.debug showpic: glcdgraphics: image '/etc/graphlcd/240x128/starte07.glcd' loaded.
Jul 15 23:55:40 (MLD) user.info vdr: [780] VDR version 2.1.6 started
Jul 15 23:55:40 (MLD) user.info vdr: [780] switched to user 'root'
Jul 15 23:55:40 (MLD) user.info vdr: [780] codeset is 'UTF-8' - known
Jul 15 23:55:40 (MLD) user.debug vdr: [780] found 28 locales in /usr/share/locale
Jul 15 23:55:40 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-clock.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-devstatus.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-dvbhddevice.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-extrecmenu.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-femon.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-graphlcd.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-opkg.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-osdpip.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-remote.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-setup.so.2.1.6
Jul 15 23:55:41 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-streamdev-server.so.2.1.6
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading plugin: /usr/lib/vdr/libvdr-tvguide.so.2.1.6
Jul 15 23:55:42 (MLD) user.err vdr: [780] tvguide: Logo Path set to /var/cache/vdr/channellogos/
Jul 15 23:55:42 (MLD) user.err vdr: [780] tvguide: EPG Image Path set to /var/cache/vdr/epgimages/
Jul 15 23:55:42 (MLD) user.err vdr: [780] tvguide: Icon Path set to /etc/vdr/plugins/tvguide/icons/
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/setup.conf
Jul 15 23:55:42 (MLD) user.err vdr: [780] ERROR: unknown config parameter: graphlcd.ReplayLogo = 1
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/sources.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/diseqc.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/scr.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/channels.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/timers.conf
Jul 15 23:55:42 (MLD) user.err vdr: [780] ERROR: channel S19.2E-1-1089-12003 not defined
Jul 15 23:55:42 (MLD) user.err vdr: [780] ERROR: error in /etc/vdr/timers.conf, line 1
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/reccmds.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/svdrphosts.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/remote.conf
Jul 15 23:55:42 (MLD) user.info vdr: [780] loading /etc/vdr/keymacros.conf
Jul 15 23:55:42 (MLD) user.debug vdr: [794] video directory scanner thread started (pid=780, tid=794, prio=high)
Jul 15 23:55:42 (MLD) user.debug vdr: [793] video directory scanner thread started (pid=780, tid=793, prio=high)
Jul 15 23:55:42 (MLD) user.debug vdr: [795] epg data reader thread started (pid=780, tid=795, prio=high)
Jul 15 23:55:42 (MLD) user.debug vdr: [780] registered source parameters for 'A - ATSC'
Jul 15 23:55:42 (MLD) user.debug vdr: [780] registered source parameters for 'C - DVB-C'
Jul 15 23:55:42 (MLD) user.debug vdr: [780] registered source parameters for 'S - DVB-S'
Jul 15 23:55:42 (MLD) user.debug vdr: [795] reading EPG data from /var/cache/vdr/epg.data
Jul 15 23:55:42 (MLD) user.debug vdr: [780] registered source parameters for 'T - DVB-T'
Jul 15 23:55:42 (MLD) user.debug vdr: [780] probing /dev/dvb/adapter0/frontend0
Jul 15 23:55:42 (MLD) user.debug vdr: [780] creating cDvbHdFfDevice
Jul 15 23:55:42 (MLD) user.debug vdr: [780] new device number 1
Jul 15 23:55:42 (MLD) user.info vdr: [780] DVB API version is 0x050A (VDR was built with 0x050A)
Jul 15 23:55:42 (MLD) user.info vdr: [780] frontend 0/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jul 15 23:55:42 (MLD) user.debug vdr: [797] tuner on frontend 0/0 thread started (pid=780, tid=797, prio=high)
Jul 15 23:55:42 (MLD) user.debug vdr: [780] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Jul 15 23:55:42 (MLD) user.debug vdr: [797] cTimeMs: using monotonic clock (resolution is 1000000 ns)
Jul 15 23:55:42 (MLD) user.debug vdr: [798] section handler thread started (pid=780, tid=798, prio=low)
Jul 15 23:55:42 (MLD) user.debug vdr: [780] probing /dev/dvb/adapter1/frontend0
Jul 15 23:55:42 (MLD) user.debug vdr: [780] creating cDvbDevice
Jul 15 23:55:42 (MLD) user.debug vdr: [780] new device number 2
Jul 15 23:55:42 (MLD) user.info vdr: [780] frontend 1/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Jul 15 23:55:42 (MLD) user.debug vdr: [804] tuner on frontend 1/0 thread started (pid=780, tid=804, prio=high)
Jul 15 23:55:42 (MLD) user.info vdr: [780] found 2 DVB devices
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: clock (1.0.0): A Simple Clock
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: devstatus (0.4.1): DVB-Gerätestatus
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: dvbhddevice (2.1.6): HD Full Featured DVB device
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: extrecmenu (1.2.3-git): Erweitertes Aufzeichnungs-Menü
Jul 15 23:55:42 (MLD) user.debug vdr: [805] section handler thread started (pid=780, tid=805, prio=low)
Jul 15 23:55:42 (MLD) user.debug vdr: [794] video directory scanner thread ended (pid=780, tid=794)
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: femon (2.1.1-GIT-0-90-g5c539e6): DVB Signal Informationsanzeige (OSD)
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: graphlcd (0.3.0): Ausgabe auf einem Grafik-LCD
Jul 15 23:55:42 (MLD) user.info vdr: [780] graphlcd plugin: INFO: No config file specified, using default (/etc/graphlcd.conf).
Jul 15 23:55:42 (MLD) user.debug vdr: [806] glcd_display thread started (pid=780, tid=806, prio=high)
Jul 15 23:55:42 (MLD) user.debug vdr: [780] graphlcd plugin: DEBUG: Init timeout waiting for display serdisp thread to get ready
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: opkg (0.1.0): Pakete verwalten
Jul 15 23:55:42 (MLD) user.debug vdr: serdisp: INFO: detected serdisplib version 2.0 (cDriver::Init)
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: osdpip (0.1.2): OSD Bild-in-Bild
Jul 15 23:55:42 (MLD) user.info vdr: serdisp: SerDisp with sdcmegtron initialized.
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: remote (0.4.0): Fernbedienung
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: setup (0.3.1-zulu-edition): System Setup
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: streamdev-server (0.6.1-git): VDR Streaming Server
Jul 15 23:55:42 (MLD) user.info vdr: [780] initializing plugin: tvguide (1.2.2): A fancy 2d EPG Viewer
Jul 15 23:55:42 (MLD) user.debug vdr: [793] video directory scanner thread ended (pid=780, tid=793)
Jul 15 23:55:43 (MLD) user.debug vdr: [795] epg data reader thread ended (pid=780, tid=795)
Jul 15 23:55:43 (MLD) user.info vdr: [780] loading /etc/vdr/themes/tvguide-blue.theme
Jul 15 23:55:43 (MLD) user.err vdr: [780] tvguide: set Theme to blue
Jul 15 23:55:43 (MLD) user.err vdr: [780] tvguide: set magick blending style
Jul 15 23:55:43 (MLD) user.err vdr: [780] tvguide: Set OSD to 1784 x 1004 px
Jul 15 23:55:43 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/symbols/empty.pbm' loaded.
Jul 15 23:55:43 (MLD) user.err vdr: [780] tvguide: Set Font to VDRSymbols Sans:Book
Jul 15 23:55:43 (MLD) user.info vdr: [780] setting primary device to 1
Jul 15 23:55:43 (MLD) user.debug vdr: [780] assuming manual start of VDR
Jul 15 23:55:43 (MLD) user.info vdr: [780] SVDRP listening on port 6419
Jul 15 23:55:43 (MLD) user.info vdr: [780] setting current skin to "sttng"
Jul 15 23:55:43 (MLD) user.info vdr: [780] loading /etc/vdr/themes/sttng-default.theme
Jul 15 23:55:43 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/logos/channels/_l.glcd' loaded.
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: clock
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: devstatus
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: dvbhddevice
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: extrecmenu
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: femon
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: graphlcd
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: opkg
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: osdpip
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: remote
Jul 15 23:55:43 (MLD) user.debug vdr: [780] remote: using '/dev/input/ir'
Jul 15 23:55:43 (MLD) user.debug vdr: [780] remote-ir: autorepeat supported
Jul 15 23:55:43 (MLD) user.debug vdr: [780] remote-ir: exclusive access granted
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: setup
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: streamdev-server
Jul 15 23:55:43 (MLD) user.info vdr: [780] loading /etc/vdr/plugins/streamdev-server/streamdevhosts.conf
Jul 15 23:55:43 (MLD) user.debug vdr: [809] extrecmenu worker thread thread started (pid=780, tid=809, prio=high)
Jul 15 23:55:43 (MLD) user.info vdr: [780] starting plugin: tvguide
Jul 15 23:55:43 (MLD) user.debug vdr: [780] remote control remote-ir - keys known
Jul 15 23:55:43 (MLD) user.debug vdr: [780] remote control KBD - keys known
Jul 15 23:55:43 (MLD) user.debug vdr: [780] setting watchdog timer to 60 seconds
Jul 15 23:55:43 (MLD) user.debug vdr: [811] streamdev server thread started (pid=780, tid=811, prio=high)
Jul 15 23:55:43 (MLD) user.info vdr: [811] Streamdev: Listening (VTP) on port 2004
Jul 15 23:55:43 (MLD) user.info vdr: [811] Streamdev: Listening (HTTP) on port 3000
Jul 15 23:55:43 (MLD) user.debug vdr: [812] KBD remote control thread started (pid=780, tid=812, prio=high)
Jul 15 23:55:43 (MLD) user.debug vdr: [780] OSD size changed to 1920x1080 @ 1
Jul 15 23:55:43 (MLD) user.debug vdr: [780] graphlcd plugin: DEBUG: Display thread for serdisp is ready
Jul 15 23:55:44 (MLD) user.debug vdr: [780] max. latency time 1 seconds
Jul 15 23:55:44 (MLD) user.info vdr: [780] connect from 127.0.0.1, port 41678 - accepted
Jul 15 23:55:44 (MLD) user.info vdr: [780] closing SVDRP connection
Jul 15 23:55:45 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link down
Jul 15 23:55:45 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link down
Jul 15 23:55:45 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 15 23:55:46 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link up
Jul 15 23:55:46 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 15 23:55:48 (MLD) user.debug vdr: [1166] video directory scanner thread started (pid=780, tid=1166, prio=high)
Jul 15 23:55:48 (MLD) user.debug vdr: [1167] video directory scanner thread started (pid=780, tid=1167, prio=high)
Jul 15 23:55:48 (MLD) user.debug vdr: [1166] video directory scanner thread ended (pid=780, tid=1166)
Jul 15 23:55:48 (MLD) user.debug vdr: [1167] video directory scanner thread ended (pid=780, tid=1167)
Jul 15 23:55:54 (MLD) user.info vdr: [780] connect from 127.0.0.1, port 41680 - accepted
Jul 15 23:55:54 (MLD) user.info vdr: [780] confirm: Das Webinterface ist über http://192.168.2.100 erreichbar.
Jul 15 23:55:54 (MLD) user.info vdr: [780] warning: Das Webinterface ist über http://192.168.2.100 erreichbar.
Jul 15 23:55:54 (MLD) user.debug vdr: glcdgraphics: image '/etc/vdr/plugins/graphlcd/skins/default/images/message.pbm' loaded.
Jul 15 23:56:05 (MLD) user.info vdr: [780] not confirmed
Jul 15 23:56:05 (MLD) user.info vdr: [780] closing SVDRP connection
Jul 15 23:56:05 (MLD) user.debug vdr: [780] max. latency time 10 seconds
Jul 15 23:56:05 (MLD) user.info vdr: [780] connect from 127.0.0.1, port 41682 - accepted
Jul 15 23:56:05 (MLD) user.info vdr: [780] SVDRP message: 'New updates available'
Jul 15 23:56:05 (MLD) user.info vdr: [780] closing SVDRP connection
Jul 15 23:56:05 (MLD) user.info vdr: [780] info: New updates available
Jul 15 23:56:05 (MLD) auth.info login[1435]: root login on 'tty1'
Jul 15 23:56:05 (MLD) auth.info login[1436]: root login on 'tty2'
Jul 15 23:56:05 (MLD) auth.info login[1437]: root login on 'tty3'
Jul 15 23:56:05 (MLD) auth.info login[1442]: root login on 'tty4'

Nun ist endgültig alles im Eimer.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #198 on: July 16, 2014, 12:16:27 »
Hallo,

Test: MLD-4.0.1-64_ff-hd_2014.07.15-71.iso  vom 16.7.  2:32h

es bleibt dabei, Webif-Anzeige hängt auf dem GLCD. Sporadisch keine Anzeige nach Kanalwechsel. FB und Konsole tot.

Zu den Fonts: Ich glaube f12bn wäre der Richtige. Mir ist aufgefallen, die Anzeige erfolgt invertiert. D.h. heller Hintergrund und dunkler Vordergrund. Bei kleineren Schriftarten sieht das dann wie Kauderwelch aus. 17bn ist deshalb lesbar, aber viel zu groß.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #199 on: July 16, 2014, 21:23:34 »
Hallp Claus,

ich habe etwas mit dem showtext gespielt. Das Ergebnis ist grauenvoll.

Code: [Select]
MLD> showtext -c /etc/graphlcd.conf -i -f fnt:/etc/vdr/plugins/graphlcd/fonts/f12b.fnt "line 1    " " L i n e 2     " "Line 3" "Line 4" "line 5 " "line 6"
WARNING: No display specified, using first one.
WARNING: No encoding specified, using default (iso8859-1).

MLD> showtext -c /etc/graphlcd.conf -f fnt:/etc/vdr/plugins/graphlcd/fonts/f12b.fnt "line 1    " " L i n e 2     " "Line 3" "Line 4" "line 5 " "line 6"
WARNING: No display specified, using first one.
WARNING: No encoding specified, using default (iso8859-1).
MLD>

Der invertierte und normale Text ist sehr schwer lesbar.
Vielleicht greift hier noch die vorherige Formatierung des GLCD und muß neu definiert werden.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20409
    • View Profile
    • ClausMuus.de
Test MLD-4.0.1-64 ISO
« Reply #200 on: July 16, 2014, 23:33:18 »
Hi,

macht die Option "-i" einen Unterschieb? Bei meinen Versuchen blieb der Hintergrund weiß.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20409
    • View Profile
    • ClausMuus.de
Test MLD-4.0.1-64 ISO
« Reply #201 on: July 17, 2014, 00:50:40 »
Hi,

ich hab die Display Hintergrundfarbe auf Schwarz geändert, wenn Text angezeigt wird.
Magst Du nun noch mal ausprobieren welcher Font (Schriftgröße) Dir gefällt.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #202 on: July 17, 2014, 01:02:49 »
Hallo Claus,

und wie bekomme ich Deine Änderung in mein System?

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #203 on: July 17, 2014, 13:57:44 »
Hallo,

Test: MLD-4.0.1-64_ff-hd_2014.07.16-71.iso  vom 17.7.  2:31h

Nach Installation in der Sysinit:
Code: [Select]
Setting up localhost:
hostname: can't open '/etc/hostname': No such file or directory     failed
.....
Starting graphlcd-base                                              failed
Setting up localhost:
hostname: can't open '/etc/hostname': No such file or directory     failed

Start mc:
Code: [Select]
BusyBox v1.22.1 (2014-07-13 03:04:37 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

cat: can't open '/etc/hostname': No such file or directory
>
>
>
> :q
-sh: :q: not found
>
> q
-sh: q: not found
> MLD
-sh: MLD: not found
>
^C und ^Z hilft nicht.

Auf der Konsole:
Code: [Select]
BusyBox v1.22.1 (2014-07-13 03:04:37 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

cat: can't open '/etc/hostname': No such file or directory
>

Ich kann meine .conf-Dateien nicht ins System kopieren.

2 Timer angelegt. Ausschalten mit F12.

Auf dem Konsolenmonitor, über framebuffer, ist der Pinguin und der Fortschrittsbalken zu sehen.
Timer werden nicht angezeigt.

Ich bin wieder einmal ratlos.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20409
    • View Profile
    • ClausMuus.de
Test MLD-4.0.1-64 ISO
« Reply #204 on: July 17, 2014, 16:31:10 »
Hi Gerhard,

die "/etc/hostname" Fehler sind wieder behoben.
Mein glcd Update bekommst Du indem Du das glcd-base Paket aktualisierst.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #205 on: July 17, 2014, 19:06:55 »
Hallo,

Test: MLD-4.0.1-64_ff-hd_2014.07.17-71.iso  vom 17.7.  16:27h

Installation und Einstellungen ok.

Die Anzeige "Webif.....IP" bleibt auf dem GLCD oft, nicht immer, hängen. Manchmal ist die FB und die Konsole wirkungslos.

Der 1. anstehende Timer wird bei "Poweroff" angezeit.
Ein gutes Bild habe ich erst, wenn ich "-i" einsetze.
Als Font würde ich f12bn auswählen.

Benutze ich "stop graphlcd" bleibt auf dem GLCD, nach einem Kaltstart, das "Webif...." stehen. Auch ein Kanalwechsel hilft nicht.
Das GLCD ist eingefroren.

Die Timeranzeige ist viel zu kurz. Maximal 1,5-2 Sek.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20409
    • View Profile
    • ClausMuus.de
Test MLD-4.0.1-64 ISO
« Reply #206 on: July 18, 2014, 00:08:38 »
Hi,

so, das nächste Update ist fertig. Die Schrift ist auf f12bn eingestellt und beim shutdown sollte der Fortschrittsbalken nicht angezeigt werden, dafür aber die Zeit der nächsten Aufnahme etwas länger.
Außerdem habe ich das Setup ein wenig aufgeräumt. Bei ner bestehenden Installation müsstest Du das also noch mal neu vornehmen.
Ich hoffe mir sind keine Fehler unterlaufen.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline gkd-berlin

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 1378
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #207 on: July 18, 2014, 02:55:03 »
Hallo Claus,

das mit einem Update All war nichts.

In ...... /etc/rc.config Line 4 ...unexpected "("
Danach pausenlos:
can´t.... TTy1 +2 +3 +4.
Das wars dann.

Gruß Gerhard
Meine VDR:
Spoiler (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Test MLD-4.0.1-64 ISO
« Reply #208 on: July 18, 2014, 08:22:25 »
Moin Gerhard

ich glaub bei dir handelt es sich um das gleiche Problem wie bei Markus23. Probier mal folgendes aus was Claus dazu geschrieben hatte:

OK, hab's gefunden. Da war mir vorhin beim Aufräumen nen Tippfehler unterlaufen.
Um das zu fixen, musst Du z.B. von CD booten und die Root Partition mounten. In der Gemounteten root Partition muss in der Datei etc/profile in Zeile 4 vor der Klammer ein $ eingefügt werden. Das sieht dann so aus:
Code: [Select]
USER=$(id -un)Danach sollte wieder alles funktionieren.

Claus
Gruß MegaX

Hardware (show / hide)

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20409
    • View Profile
    • ClausMuus.de
Test MLD-4.0.1-64 ISO
« Reply #209 on: July 18, 2014, 11:11:50 »
Hi Gerhard,

da warst Du ausnahmsweise mal zu schnell. Hättest Du 10 Minuten später das Upgrade all gemacht, wäre der Fehler nicht mehr aufgetreten ;)

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

1 ... 12 13 [14] 15 16 ... 19 >>> Archiv / MLD 4.x / Development / Test MLD-4.0.1-64 ISO
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.