[1] Archiv / MLD 3.x / General / TeVii S660 USB läuft nicht
 

Offline Jarny

  • Newbie
  • *
  • Posts: 32
    • View Profile
TeVii S660 USB läuft nicht
« on: May 22, 2014, 20:05:49 »
Hi

Ich habe vor ca. einem halben Jahr eine gebrauchte TeVii S660 bei Ebay ersteigert. Jetzt wollte ich das Teil mal in Betrieb nehmen und habe einen alten Rechner (Pentium 4) rausgekramt und dort die MLD 3.0.1.1 Server installiert und ausserdem Astra FTA als Senderliste eingestellt. SatKabel von einem funktionierenden MLD-Server umgesteckt auf den neu installierten und geschaut ob ich mit VDR Live ein EPG sehe.
Leider sehe ich kein EPG (habe ca 15 Minuten gewartet), deshalb gehe ich davon aus, dass die TeVii noch nicht richtig läuft. Ich finde aber leider den Fehler nicht. Im Logfile erkenne ich keinen offensichtlichen Fehler:
Code: [Select]
/var/log/messages
May 22 17:53:23 (none) syslog.info syslogd started: BusyBox v1.21.1
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2320]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2333]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2346]: uid/gid/perm /var/spool/apm.mnt/install 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2359]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2372]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2385]: uid/gid/perm /var/spool/apm.mnt/nfs-server 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2398]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2411]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2428]: uid/gid/perm /var/spool/apm.mnt/lib-curl 0/0/0777, 0/0/0775
May 22 17:53:24 (none) user.warn kernel: aufs test_add:264:mount[2445]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2462]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2479]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2496]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2513]: uid/gid/perm /var/spool/apm.mnt/dummydevice 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2530]: uid/gid/perm /var/spool/apm.mnt/skincurses 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2547]: uid/gid/perm /var/spool/apm.mnt/streamdev-server 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2564]: uid/gid/perm /var/spool/apm.mnt/svdrposd 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2581]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2598]: uid/gid/perm /var/spool/apm.mnt/live 0/0/0777, 0/0/0775
May 22 17:53:25 (none) user.warn kernel: aufs test_add:264:mount[2615]: uid/gid/perm /var/spool/apm.mnt/devstatus 0/0/0777, 0/0/0775
May 22 17:53:27 (none) user.notice kernel: XFS (hda2): Mounting Filesystem
May 22 17:53:27 (none) user.info kernel: XFS (hda2): Ending clean mount
May 22 17:53:30 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
May 22 17:53:30 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
May 22 17:53:30 (none) user.err kernel: enough quality for its usage in production.
May 22 17:53:30 (none) user.err kernel: Use it with care.
May 22 17:53:30 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May 22 17:53:30 (none) user.err kernel: dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
May 22 17:53:30 (none) user.err kernel: 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
May 22 17:53:30 (none) user.err kernel: 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
May 22 17:53:30 (none) user.err kernel: experimental: 7631b6e10c42669d290362c13fee7da3be35a8da experimental: Basic support for parallel build ('make -jN')
May 22 17:53:30 (none) user.err kernel: ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
May 22 17:53:30 (none) user.err kernel: v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
May 22 17:53:30 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
May 22 17:53:30 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
May 22 17:53:30 (none) user.err kernel: enough quality for its usage in production.
May 22 17:53:30 (none) user.err kernel: Use it with care.
May 22 17:53:30 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May 22 17:53:30 (none) user.err kernel: dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
May 22 17:53:30 (none) user.err kernel: 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
May 22 17:53:30 (none) user.err kernel: 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
May 22 17:53:30 (none) user.err kernel: experimental: 7631b6e10c42669d290362c13fee7da3be35a8da experimental: Basic support for parallel build ('make -jN')
May 22 17:53:30 (none) user.err kernel: ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
May 22 17:53:30 (none) user.err kernel: v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
May 22 17:53:30 (none) user.info kernel: dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
May 22 17:53:30 (none) user.info kernel: dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
May 22 17:53:30 (none) user.info kernel: dw2102: start downloading DW210X firmware
May 22 17:53:30 (none) user.info kernel: dvb-usb: found a 'TeVii S660 USB' in warm state.
May 22 17:53:30 (none) user.info kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
May 22 17:53:30 (none) user.info kernel: DVB: registering new adapter (TeVii S660 USB)
May 22 17:53:31 (none) user.info kernel: dvb-usb: MAC address: 00:18:bd:5b:1e:21
May 22 17:53:31 (none) user.info kernel: DS3000 chip version: 0.192 attached.
May 22 17:53:31 (none) user.info kernel: ts2020_attach: Find tuner TS2020!
May 22 17:53:31 (none) user.info kernel: dw2102: Attached ds3000+ds2020!
May 22 17:53:31 (none) user.info kernel: usb 1-2: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
May 22 17:53:31 (none) user.info kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input1
May 22 17:53:31 (none) user.info kernel: dvb-usb: schedule remote query interval to 150 msecs.
May 22 17:53:31 (none) user.info kernel: dvb-usb: TeVii S660 USB successfully initialized and connected.
May 22 17:53:31 (none) user.info kernel: usbcore: registered new interface driver dw2102
May 22 19:53:32 (none) user.err vdr: [3113] [live] INFO: validating server ip '0.0.0.0'
May 22 17:53:32 (none) user.info kernel: ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
May 22 17:53:32 (none) user.info kernel: ds3000_firmware_ondemand: Waiting for firmware upload(2)...
May 22 19:53:32 (none) user.err vdr: [3130] [live] INFO: attempt to listen on ip = '0.0.0.0'
May 22 17:53:36 (none) user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
May 22 17:53:36 (none) user.info kernel: e100: Copyright(c) 1999-2006 Intel Corporation
May 22 17:53:36 (none) user.info kernel: e100 0000:02:08.0: eth0: addr 0xd0100000, irq 20, MAC addr 00:30:05:2e:be:9f
May 22 17:53:37 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
May 22 17:53:37 (none) user.info kernel: e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
May 22 17:53:37 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
May 22 17:53:44 (none) user.info kernel: RPC: Registered named UNIX socket transport module.
May 22 17:53:44 (none) user.info kernel: RPC: Registered udp transport module.
May 22 17:53:44 (none) user.info kernel: RPC: Registered tcp transport module.
May 22 17:53:44 (none) user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
May 22 17:53:44 (none) user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
May 22 19:53:45 (none) daemon.notice rpc.mountd[4567]: Version 1.2.6 starting
May 22 17:53:48 (none) user.debug kernel: eth0: no IPv6 routers present
May 22 17:53:56 (none) user.info kernel: bootsplash: status on console 0 changed to on
May 22 19:53:56 (none) auth.info login[5082]: root login on 'tty1'
May 22 19:53:56 (none) auth.info login[5084]: root login on 'tty2'
May 22 19:53:56 (none) auth.info login[5088]: root login on 'tty3'
May 22 19:53:56 (none) auth.info login[5096]: root login on 'tty4'

Noch ne Info:
An der TeVii USBbox leuchtet eine rote LED. Eine blaue LED ist mal kurz aufgeblitzt als ich die Box an den Strom gesteckt habe.

Hat jemand eine Idee wie ich den Fehler eingrenzen kann? Hoffentlich hat man mir bei Ebay keine defekte Karte angedreht. Beim Vorbesitzer hat sie jedenfalls angeblich funktioniert.

Gruß
Jarny

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20445
    • View Profile
    • ClausMuus.de
TeVii S660 USB läuft nicht
« Reply #1 on: May 23, 2014, 11:04:53 »
Hi,

für mich sieht das soweit gut aus. Der DVB-USB-Stick wurde jedenfalls erkannt. Ich würd einfach mal das Standard ISO nehmen und schauen ob's dann nen Bild gibt. Da kannst Du dann auch gleich sehen wie die Signalstärke ist.
Du verwendest aber nicht zufällig Unicable?

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

[1] Archiv / MLD 3.x / General / TeVii S660 USB läuft nicht
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.