Archiv > General
Tevii S482 Treiber Problem
dopex:
leider ist trotzdem kein tuner im vdr verfügbar :/
beide werden anscheinend richtig erkannt:
Jun 30 16:42:05 (MLD) user.info kernel: dvb-usb: TeVii S482.1 USB successfully initialized and connected.
Jun 30 16:42:06 (MLD) user.info kernel: dvb-usb: TeVii S482.2 USB successfully initialized and connected.
Ein Restart des VDR bringt auch keinen Zugriff auf die Tuner.
det:
hi
die dvb-fe-ds3103.fw hast du aber auf deinen System ?
Leider ist die besagte Firmware noch nicht auf der TeVii-Seite verfügbar, aber Google hilft bei der Suche nach einer Download-Quelle
mfg det
dopex:
Hallo det,
ja in /lib/firmware ist die Datei vorhanden.
Habe jetzt mal die Dateien:
dvb-fe-ds3000.fw
dvb-fe-ds3103.fw
dvb-usb-s660.fw
mit denen aus dem Tevii Paket ersetzt. Leider kein Erfolg.
alle 3 Dateien waren schon vorhanden mit der selben Grösse, alle 8.192 B.
dopex:
das laden der firmware taucht auch nirgends in der log auf?
--- Code: ---MLD> dmesg | grep -i dvb
v4l-dvb-saa716x: 432762831b67a456254fd291f4921e8ed75ae43b saa716x_ff: Optimize access to FIFO.
v4l-dvb-saa716x: 432762831b67a456254fd291f4921e8ed75ae43b saa716x_ff: Optimize access to FIFO.
dvb-usb: found a 'TeVii S482.1 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S482.1 USB)
dvb-usb: MAC address: 00:18:bd:5b:bf:f8
dvb-usb: no frontend was attached by 'TeVii S482.1 USB'
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/usb3/3-1/rc/rc0/input5
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/usb3/3-1/rc/rc0
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S482.1 USB successfully initialized and connected.
dvb-usb: found a 'TeVii S482.2 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S482.2 USB)
dvb-usb: MAC address: 00:18:bd:5b:bf:f7
dvb-usb: no frontend was attached by 'TeVii S482.2 USB'
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.3/usb4/4-1/rc/rc1/input6
rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.3/usb4/4-1/rc/rc1
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S482.2 USB successfully initialized and connected.
--- End code ---
--- Code: ---MLD> dmesg | grep -i firmware
MLD>
--- End code ---
--- Code: ---MLD> dmesg | grep -i usb
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
ehci-pci 0000:02:00.1: new USB bus registered, assigned bus number 3
ehci-pci 0000:02:00.1: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
ehci-pci 0000:02:00.3: new USB bus registered, assigned bus number 4
ehci-pci 0000:02:00.3: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
ehci-pci 0000:02:00.5: new USB bus registered, assigned bus number 5
ehci-pci 0000:02:00.5: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
ehci-pci 0000:02:00.7: new USB bus registered, assigned bus number 6
ehci-pci 0000:02:00.7: USB 2.0 started, EHCI 1.00
hub 6-0:1.0: USB hub found
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
hub 7-0:1.0: USB hub found
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 8
hub 8-0:1.0: USB hub found
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
hub 9-0:1.0: USB hub found
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 10
hub 10-0:1.0: USB hub found
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
hub 11-0:1.0: USB hub found
ohci-pci 0000:02:00.0: new USB bus registered, assigned bus number 12
usb 3-1: new high-speed USB device number 2 using ehci-pci
hub 12-0:1.0: USB hub found
ohci-pci 0000:02:00.2: new USB bus registered, assigned bus number 13
hub 13-0:1.0: USB hub found
ohci-pci 0000:02:00.4: new USB bus registered, assigned bus number 14
hub 14-0:1.0: USB hub found
ohci-pci 0000:02:00.6: new USB bus registered, assigned bus number 15
hub 15-0:1.0: USB hub found
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-1: new high-speed USB device number 2 using ehci-pci
dvb-usb: found a 'TeVii S482.1 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S482.1 USB)
dvb-usb: MAC address: 00:18:bd:5b:bf:f8
dvb-usb: no frontend was attached by 'TeVii S482.1 USB'
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/usb3/3-1/rc/rc0/input5
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/usb3/3-1/rc/rc0
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S482.1 USB successfully initialized and connected.
dvb-usb: found a 'TeVii S482.2 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S482.2 USB)
dvb-usb: MAC address: 00:18:bd:5b:bf:f7
dvb-usb: no frontend was attached by 'TeVii S482.2 USB'
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.3/usb4/4-1/rc/rc1/input6
rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.3/usb4/4-1/rc/rc1
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S482.2 USB successfully initialized and connected.
usbcore: registered new interface driver dw2102
--- End code ---
MegaX:
Danke für die Rückmeldung.
Wenigstens klappt das schon mal das die Karte erkannt wird. Na mal sehen wo es noch hängt.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version