Archiv > Raspberry PI
Unterstützung Technotrend S2-4600
Garak:
oder besser, ihr baut aus den gesamten Quellen von https://bitbucket.org/CrazyCat/s2-liplianin-v39/src/c8bc2800443a ein alternatives dvb-usb-, oder media-build-experimental Packet.
clausmuus:
Das mit dem Patchen wird wohl eher nichts werden, das sich das mit zu vielen anderen Patches beißt.
Bleibt also wohl nur das liplianin als eigenes Paket zu bauen.
Claus
MegaX:
Hi
es gibt jetzt ein Paket namens dvb-liplianin das in ein paar Minuten für den PC auf dem Server verfügbar sein sollte.
Für den RPI baut Claus auch gerade das Paket, da dauert es länger, aber ich bin zuversichtlich das es heuet Abend verfügbar sein sollte.
Also dann testet mal bitte und gebt Bescheid obs geht oder immernoch irgendwo hakt.
clausmuus:
Jetzt ist der Treiber auch für den RPI fertig.
Claus
Garak:
Erster kurzer Test:
dmesg-Ausgabe etwas verwirrend:
--- Code: ---...
[ 3.549519] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 3.650421] usb 1-1.3: New USB device found, idVendor=0b48, idProduct=3011
[ 3.650452] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.650472] usb 1-1.3: Product: dvb-s2
[ 3.650489] usb 1-1.3: Manufacturer: geniatech
[ 3.650505] usb 1-1.3: SerialNumber: 000000000232
[ 4.844724] random: nonblocking pool is initialized
[ 5.801740] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 11.460908] i2c /dev entries driver
[ 12.317679] udevd[843]: starting version 175
[ 13.160647] bcm2708_i2c_init_pinmode(0,0)
[ 13.160681] bcm2708_i2c_init_pinmode(0,1)
[ 13.200471] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[ 13.200694] bcm2708_i2c_init_pinmode(1,2)
[ 13.200716] bcm2708_i2c_init_pinmode(1,3)
[ 13.203479] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 13.578303] WARNING: You are using an experimental version of the media stack.
[ 13.578303] As the driver is backported to an older kernel, it doesn't offer
[ 13.578303] enough quality for its usage in production.
[ 13.578303] Use it with care.
[ 13.578303] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 13.578303] 6bf7861fa2bb4be3cc70a6e9aed664ce65270027 [media] si476x: Fix some config dependencies and a compile warnings
[ 13.578303] b0efc3ed0530b08e9e1cba5f63e9c251ca3d7428 [media] m920x: Fix uninitialized variable warning
[ 13.578303] 46f85978687152c53a69fc06951e386f194e7f5d [media] em28xx: fix typo in scale_to_size()
[ 13.670392] WARNING: You are using an experimental version of the media stack.
[ 13.670392] As the driver is backported to an older kernel, it doesn't offer
[ 13.670392] enough quality for its usage in production.
[ 13.670392] Use it with care.
[ 13.670392] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 13.670392] 6bf7861fa2bb4be3cc70a6e9aed664ce65270027 [media] si476x: Fix some config dependencies and a compile warnings
[ 13.670392] b0efc3ed0530b08e9e1cba5f63e9c251ca3d7428 [media] m920x: Fix uninitialized variable warning
[ 13.670392] 46f85978687152c53a69fc06951e386f194e7f5d [media] em28xx: fix typo in scale_to_size()
[ 13.830701] dw2102: su3000_identify_state
[ 13.830701]
[ 13.830743] dvb-usb: found a 'TT Connect S2 4600' in warm state.
[ 13.830790] dw2102: su3000_power_ctrl: 1, initialized 0
[ 13.830790]
[ 13.840709] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.840954] DVB: registering new adapter (TT Connect S2 4600)
[ 13.850932] bc ea 2b 46 07 14
[ 13.850984] dvb-usb: MAC address: bc:ea:2b:46:07:14
[ 14.259602] Chip ID != [DS300X]! Not supported by this module
[ 14.318830] Chip ID = [DS3103]!
[ 14.318870] DS3103 chip version: 0.208 attached.
[ 14.391786] dw2102: Attached DS3103/TS2022!
[ 14.391786]
[ 14.391854] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Montage Technology DS3103/TS2022)...
[ 14.393790] input: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/input/input2
[ 14.394224] dvb-usb: schedule remote query interval to 250 msecs.
[ 14.394256] dw2102: su3000_power_ctrl: 0, initialized 1
[ 14.394256]
[ 14.394275] dvb-usb: TT Connect S2 4600 successfully initialized and connected.
[ 14.394623] usbcore: registered new interface driver dw2102
[ 15.339969] XFS (mmcblk0p1): unknown mount option [nls].
[ 15.353651] XFS (mmcblk0p3): Mounting V4 Filesystem
[ 15.725870] XFS (mmcblk0p3): Ending clean mount
[ 16.639560] dvb-usb: recv bulk message failed: -110
[ 16.639592] dw2102: i2c transfer failed.
[ 22.722567] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 24.311166] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 49.295016] dw2102: su3000_power_ctrl: 1, initialized 1
[ 49.295016]
[ 49.311035] ds3103_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[ 49.315901] ds3103_firmware_ondemand: Waiting for firmware upload(2)...
[ 66.389767] input: lircd as /devices/virtual/input/input3
[ 76.289856] rtc-test rtc-test.0: test_rtc_set_mmss, secs = 1410988188
[ 685.581521] dw2102: su3000_power_ctrl: 0, initialized 1
[ 685.581521]
[ 687.721907] dw2102: su3000_power_ctrl: 1, initialized 1
[ 687.721907]
[ 687.743693] ds3103_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[ 687.743932] ds3103_firmware_ondemand: Waiting for firmware upload(2)...
...
--- End code ---
--- Code: ---MLD_SERVER> lsmod
Module Size Used by Tainted: G
ts2022 5902 1
ds3103 12491 1
ds3000 11048 0
dvb_usb_dw2102 44048 15
dvb_usb 21568 1 dvb_usb_dw2102
dvb_core 91865 1 dvb_usb
rc_core 17148 1 dvb_usb
i2c_bcm2708 5248 0
i2c_dev 5306 0
snd_bcm2835 19438 0
snd_pcm 85354 1 snd_bcm2835
snd_timer 20369 1 snd_pcm
snd 58736 3 snd_bcm2835,snd_pcm,snd_timer
uinput 6735 1
--- End code ---
Alle vier Devices in /dev/dvb/adapter0/ sind angelegt. Channel-Scan funktioniert. Und über den Streamdev-Server bekomme ich auch ein einwandfreies Fernsehbild mit Ton. Soweit ich das beurteilen kann, ist das Packet erfolgreich gebaut. Morgen werde ich dann mal die Fernbedienung testen.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version