Hallo zusammen,
ich habe mein System mal wieder auf den neuesten Stand gebracht und dabei scheint leider etwas schief gegangen zu sein: der VDR startet nicht mehr, weil er /dev/input/ir nicht mehr findet.
Ich nutze eine alte FF 1.6 mit AVBoard und dem remote-Plugin. Die Zweitkarte ist eine Technisat Skystar.
Durch Deinstallieren des Remote-Plugins konnte ich schonmal einen Notbetrieb initiieren, mit Fernbedienung via Webinterface.
Ich bin ehrlich gesagt ratlos, was ich noch untersuchen kann.
Das Input-Device fehlt einfach:
vdr> cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
Im Dmesg-Log sehe ich eine Fehlermeldung im Umfeld von CX24120, das ist aber IMHO ja die Technisat Skystar und nicht die FF1.6.
Ich vermisse eine Meldung a la "input: DVB on-card IR receiver as /class/input/inputX"
dmesg
---schnipp---
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
1ef24960ab78554fe7e8e77d8fc86524fbd60d3c Merge tag 'v3.18-rc1' into patchwork
f114040e3ea6e07372334ade75d1ee0775c355e1 Linux 3.18-rc1
4d3639ac3c11afc8fdcb28f95916ef4b21c3fa36 Merge tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
experimental: 35b8a1ba114932ad7af411d9baec3b801cca9ee8 experimental: Fix 'make menuconfig' for older kernels: Accept help text with smaller indentation. 2nd try.
v4l-dvb-saa716x: dfd91ae70d2d6350c04162f8ac32074be14947e1 saa716x_ff: Align block data on 32 bytes for firmware 0.5.0 and up
ssb: Found chip with id 0x4401, rev 0x01 and package 0x00
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:00:0f.0
b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0e:a6:16:cd:17
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
media: Linux media interface: v0.10
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:0b:6a:5b
Linux video capture interface: v2.00
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
1ef24960ab78554fe7e8e77d8fc86524fbd60d3c Merge tag 'v3.18-rc1' into patchwork
f114040e3ea6e07372334ade75d1ee0775c355e1 Linux 3.18-rc1
4d3639ac3c11afc8fdcb28f95916ef4b21c3fa36 Merge tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
experimental: 35b8a1ba114932ad7af411d9baec3b801cca9ee8 experimental: Fix 'make menuconfig' for older kernels: Accept help text with smaller indentation. 2nd try.
v4l-dvb-saa716x: dfd91ae70d2d6350c04162f8ac32074be14947e1 saa716x_ff: Align block data on 32 bytes for firmware 0.5.0 and up
saa7146: register extension 'av7110'
CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
CX24120: cx24120_attach: -> Driver version: 'SVT - 0.0.4a 03.04.2012'
CX24120: cx24120_readreg: ### ERROR: Read error: reg=0xff, ret=0xffffff87)
CX24120: cx24120_attach: ### ERROR: ### Unsupported demod revision: 0xffffff87 detected. Exit.
CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
CX24123: wrong demod revision: 87
b2c2-flexcop: found 'ST STV0299 DVB-S' .
b2c2_flexcop_pci 0000:00:0e.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
saa7146: found saa7146 @ mem cecec000 (revision 1, irq 18) (0x13c2,0x0000)
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
adapter has MAC addr = 00:d0:5c:01:e9:80
dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80fb2624
dvb-ttpci: firmware @ card 1 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 1 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
av7110 0000:00:13.0: DVB: registering adapter 1 frontend 0 (Philips TDA8083 DVB-S)...
dvb-ttpci: found av7110-0.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
---schnapp---
Habt Ihr Ideen? Danke im Voraus!
Olaf