MLD> cat /var/log/install.log
==start installation==
==partitioning disk mmcblk0==
1024+0 records in
1024+0 records out
sh: missing ]
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
The number of cylinders for this disk is set to 7600.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-7600, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-7600, default 7600):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (97-7600, default 97): Using default value 97
Last cylinder or +size or +sizeM or +sizeK (97-7600, default 7600): Using default value 7600
Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32)
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table
Disk /dev/mmcblk0: 7969 MB, 7969177600 bytes
64 heads, 32 sectors/track, 7600 cylinders, total 15564800 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 32 196607 98288 b Win95 FAT32
/dev/mmcblk0p2 196608 15564799 7684096 83 Linux
------ done ------
==format disk mmcblk0p1==
mkfs.fat 3.0.26 (2014-03-07)
------ done ------
==format disk mmcblk0p2==
Turning ON incompat feature 'extref': increased hardlink limit per file to 65536
Detected a SSD, turning off metadata duplication. Mkfs with -m dup if you want to force metadata duplication.
WARNING! - Btrfs v3.12 IS EXPERIMENTAL
WARNING! - see
http://btrfs.wiki.kernel.org before using
fs created label (null) on /dev/mmcblk0p2
nodesize 16384 leafsize 16384 sectorsize 4096 size 7.33GiB
Btrfs v3.12
------ done ------
==install system on mmcblk0p2==
mount: mounting /dev/mmcblk0p2 on /mnt/mmcblk0p2 failed: Invalid argument
ERROR: cannot create subvolume - Inappropriate ioctl for device
Create subvolume '/mnt/mmcblk0p2/@cache'
ERROR: cannot create subvolume - Inappropriate ioctl for device
Create subvolume '/mnt/mmcblk0p2/@data'
ERROR: cannot create subvolume - Inappropriate ioctl for device
Create subvolume '/mnt/mmcblk0p2/@root____________________'
ERROR: can't perform the search -Inappropriate ioctl for device
ERROR: can't get rootid for '/mnt/mmcblk0p2/'
btrfs subvolume set-default: too few arguments
usage: btrfs subvolume set-default <subvolid> <path>
Set the default subvolume of a filesystem
/usr/sbin/install.sh: cd: line 499: can't cd to /mnt/mmcblk0p2/@root*
cp: recursion detected, omitting directory '/var/www/var'
Removing package install from root...
mount: mounting /dev/mmcblk0p2 on var/cache failed: Device or resource busy
umount: can't umount var/cache: Invalid argument
mount: mounting /dev/mmcblk0p2 on mnt/data failed: Invalid argument
umount: can't umount mnt/data: Invalid argument
umount: can't umount /mnt/mmcblk0p2: Invalid argument
====== failed ======
MLD>
Users Online