Und hier noch die Ausgabe von dmesg:
MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0.147 (devel@mld-nb4-rpi2) (gcc version 4.6.3 (Debian 4.6.3-14+rpi1) ) #1 SMP PREEMPT Sun Mar 1 05:32:46 CET 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: BCM2709
[ 0.000000] cma: Reserved 8 MiB at 0x36800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 225280
[ 0.000000] free_area_init_node: node 0, pgdat 80a42f40, node_mem_map b6036000
[ 0.000000] Normal zone: 1980 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 225280 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 11 pages/cpu @b6005000 s13184 r8192 d23680 u45056
[ 0.000000] pcpu-alloc: s13184 r8192 d23680 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223300
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa01041 bcm2709.serial=0x79083655 smsc95xx.macaddr=B8:27:EB:08:36:55 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p2 rootwait splash=silent quiet nodialog smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 872672K/901120K available (7552K kernel code, 421K rwdata, 2076K rodata, 456K init, 780K bss, 20256K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xb7800000 - 0xff000000 (1144 MB)
[ 0.000000] lowmem : 0x80000000 - 0xb7000000 ( 880 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x8096f430 (9630 kB)
[ 0.000000] .init : 0x80970000 - 0x809e2000 ( 456 kB)
[ 0.000000] .data : 0x809e2000 - 0x80a4b73c ( 422 kB)
[ 0.000000] .bss : 0x80a4b73c - 0x80b0eadc ( 781 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:480
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000037] Switching to timer-based delay loop, resolution 52ns
[ 0.000327] Console: colour dummy device 80x30
[ 0.000551] console [tty0] enabled
[ 0.000581] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000605] pid_max: default: 32768 minimum: 301
[ 0.001005] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001029] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002349] Initializing cgroup subsys memory
[ 0.002396] Initializing cgroup subsys devices
[ 0.002423] Initializing cgroup subsys freezer
[ 0.002464] Initializing cgroup subsys net_cls
[ 0.002487] Initializing cgroup subsys blkio
[ 0.002572] CPU: Testing write buffer coherency: ok
[ 0.002659] ftrace: allocating 23400 entries in 69 pages
[ 0.062491] missing device node for CPU 0
[ 0.062559] missing device node for CPU 1
[ 0.062585] missing device node for CPU 2
[ 0.062612] missing device node for CPU 3
[ 0.062649] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.062665] [bcm2709_smp_prepare_cpus] enter
[ 0.062805] Setting up static identity map for 0x6dcb80 - 0x6dcbd8
[ 0.122532] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.122837] [bcm2709_secondary_init] enter cpu:1
[ 0.122894] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.142496] [bcm2709_boot_secondary] cpu:2 started (0) 17
[ 0.142755] [bcm2709_secondary_init] enter cpu:2
[ 0.142791] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.162571] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.162809] [bcm2709_secondary_init] enter cpu:3
[ 0.162843] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.162940] Brought up 4 CPUs
[ 0.162966] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.162978] CPU: All CPU(s) started in SVC mode.
[ 0.164019] devtmpfs: initialized
[ 0.182696] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.184165] xor: measuring software checksum speed
[ 0.282327] arm4regs : 829.200 MB/sec
[ 0.382432] 8regs : 542.400 MB/sec
[ 0.482536] 32regs : 511.200 MB/sec
[ 0.582649] neon : 594.400 MB/sec
[ 0.582664] xor: using function: arm4regs (829.200 MB/sec)
[ 0.582708] pinctrl core: initialized pinctrl subsystem
[ 0.583501] NET: Registered protocol family 16
[ 0.589115] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.612753] cpuidle: using governor ladder
[ 0.642784] cpuidle: using governor menu
[ 0.643151] bcm2709.uart_clock = 3000000
[ 0.646800] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.646818] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.646856] mailbox: Broadcom VideoCore Mailbox driver
[ 0.646966] bcm2708_vcio: mailbox at f300b880
[ 0.647392] bcm_power: Broadcom power driver
[ 0.647411] bcm_power_open() -> 0
[ 0.647423] bcm_power_request(0, 8)
[ 1.148093] bcm_mailbox_read -> 00000080, 0
[ 1.148107] bcm_power_request -> 0
[ 1.148249] Serial: AMBA PL011 UART driver
[ 1.148390] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 1.383632] raid6: int32x1 87 MB/s
[ 1.553854] raid6: int32x2 103 MB/s
[ 1.724440] raid6: int32x4 101 MB/s
[ 1.894846] raid6: int32x8 79 MB/s
[ 2.064651] raid6: neonx1 287 MB/s
[ 2.234799] raid6: neonx2 384 MB/s
[ 2.405041] raid6: neonx4 424 MB/s
[ 2.575177] raid6: neonx8 266 MB/s
[ 2.575190] raid6: using algorithm neonx4 (424 MB/s)
[ 2.575202] raid6: using intx1 recovery algorithm
[ 2.575812] SCSI subsystem initialized
[ 2.576066] usbcore: registered new interface driver usbfs
[ 2.576185] usbcore: registered new interface driver hub
[ 2.576351] usbcore: registered new device driver usb
[ 2.578258] Switched to clocksource arch_sys_counter
[ 2.633114] FS-Cache: Loaded
[ 2.633520] CacheFiles: Loaded
[ 2.649595] NET: Registered protocol family 2
[ 2.651018] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 2.651145] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.651339] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.651454] TCP: reno registered
[ 2.651475] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.651538] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.651884] NET: Registered protocol family 1
[ 2.652396] RPC: Registered named UNIX socket transport module.
[ 2.652414] RPC: Registered udp transport module.
[ 2.652425] RPC: Registered tcp transport module.
[ 2.652435] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.653401] bcm2708_dma: DMA manager at f3007000
[ 2.653545] bcm2708_gpio: bcm2708_gpio_probe 80a071a8
[ 2.654301] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 2.656329] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.656569] audit: initializing netlink subsys (disabled)
[ 2.656637] audit: type=2000 audit(2.619:1): initialized
[ 2.677334] FS-Cache: Netfs 'nfs' registered for caching
[ 2.678442] NFS: Registering the id_resolver key type
[ 2.678516] Key type id_resolver registered
[ 2.678529] Key type id_legacy registered
[ 2.678955] SGI XFS with security attributes, no debug enabled
[ 2.684568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.684760] io scheduler noop registered
[ 2.684785] io scheduler deadline registered
[ 2.684855] io scheduler cfq registered (default)
[ 2.686574] BCM2708FB: allocated DMA memory f6c00000
[ 2.686625] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 2.716843] Console: switching to colour frame buffer device 240x61
[ 2.736608] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 2.736959] uart-pl011 dev:f1: no DMA platform data
[ 2.737554] vc-cma: Videocore CMA driver
[ 2.737569] vc-cma: vc_cma_base = 0x00000000
[ 2.737581] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 2.737593] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 2.751450] brd: module loaded
[ 2.758381] loop: module loaded
[ 2.758805] vchiq: vchiq_init_state: slot_zero = 0xb6800000, is_master = 0
[ 2.759609] Loading iSCSI transport class v2.0-870.
[ 2.760506] usbcore: registered new interface driver smsc95xx
[ 2.760584] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.960964] Core Release: 2.80a
[ 2.960985] Setting default values for core params
[ 2.961038] Finished setting default values for core params
[ 3.161484] Using Buffer DMA mode
[ 3.161501] Periodic Transfer Interrupt Enhancement - disabled
[ 3.161511] Multiprocessor Interrupt Enhancement - disabled
[ 3.161524] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.161542] Dedicated Tx FIFOs mode
[ 3.161934] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c14000 dma = 0xf6c14000 len=9024
[ 3.161974] FIQ FSM acceleration enabled for :
[ 3.161974] Non-periodic Split Transactions
[ 3.161974] Periodic Split Transactions
[ 3.161974] High-Speed Isochronous Endpoints
[ 3.162000] dwc_otg: Microframe scheduler enabled
[ 3.162071] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80581ac0
[ 3.162091] WARN::hcd_init_fiq:413: FIQ ASM at 0x80581e0c length 36
[ 3.162112] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb7806000
[ 3.162139] dwc_otg bcm2708_usb: DWC OTG Controller
[ 3.162192] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 3.162244] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 3.162303] Init: Port Power? op_state=1
[ 3.162314] Init: Power Port (0)
[ 3.162648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.162669] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.162686] usb usb1: Product: DWC OTG Controller
[ 3.162702] usb usb1: Manufacturer: Linux 3.19.0.147 dwc_otg_hcd
[ 3.162718] usb usb1: SerialNumber: bcm2708_usb
[ 3.163864] hub 1-0:1.0: USB hub found
[ 3.163935] hub 1-0:1.0: 1 port detected
[ 3.164685] dwc_otg: FIQ enabled
[ 3.164702] dwc_otg: NAK holdoff enabled
[ 3.164713] dwc_otg: FIQ split-transaction FSM enabled
[ 3.164756] Module dwc_common_port init
[ 3.165189] usbcore: registered new interface driver usb-storage
[ 3.165516] mousedev: PS/2 mouse device common for all mice
[ 3.166228] bcm2835-cpufreq: min=600000 max=900000
[ 3.166534] Driver 'mmcblk' needs updating - please use bus_type methods
[ 3.166615] sdhci: Secure Digital Host Controller Interface driver
[ 3.166627] sdhci: Copyright(c) Pierre Ossman
[ 3.166808] DMA channels allocated for the MMC driver
[ 3.198424] Load BCM2835 MMC driver
[ 3.198616] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.199137] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.200481] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.202889] usbcore: registered new interface driver usbhid
[ 3.202902] usbhid: USB HID core driver
[ 3.203295] TCP: cubic registered
[ 3.204398] Initializing XFRM netlink socket
[ 3.204446] NET: Registered protocol family 17
[ 3.204633] Key type dns_resolver registered
[ 3.207193] Registering SWP/SWPB emulation handler
[ 3.213870] registered taskstats version 1
[ 3.217807] Btrfs loaded
[ 3.218027] vc-sm: Videocore shared memory driver
[ 3.218047] [vc_sm_connected_init]: start
[ 3.218900] [vc_sm_connected_init]: end - returning 0
[ 3.219961] Waiting for root device /dev/mmcblk0p2...
[ 3.236824] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.240106] mmc0: new high speed SDHC card at address aaaa
[ 3.240772] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 3.242357] mmcblk0: p1 p2
[ 3.334602] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.334626] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 1th superblock
[ 3.335454] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.335472] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 2th superblock
[ 3.335644] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.335658] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 1th superblock
[ 3.335818] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.335832] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 2th superblock
[ 3.336764] BTRFS: device fsid c503670b-cfb8-4551-bc65-16eef5da1fe3 devid 1 transid 77 /dev/root
[ 3.338914] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 3.353387] BTRFS: detected SSD devices, enabling SSD mode
[ 3.357639] VFS: Mounted root (btrfs filesystem) on device 0:14.
[ 3.358496] Indeed it is in host mode hprt0 = 00021501
[ 3.369536] devtmpfs: mounted
[ 3.370325] Freeing unused kernel memory: 456K (80970000 - 809e2000)
[ 3.538461] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.538645] Indeed it is in host mode hprt0 = 00001101
[ 3.738777] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.738807] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.740042] hub 1-1:1.0: USB hub found
[ 3.740165] hub 1-1:1.0: 5 ports detected
[ 4.018436] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.118620] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.118641] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.121788] smsc95xx v1.0.4
[ 4.182130] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:08:36:55
[ 4.258370] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 4.359878] usb 1-1.3: New USB device found, idVendor=7392, idProduct=7822
[ 4.359899] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.359916] usb 1-1.3: Product: 802.11n WLAN Adapter
[ 4.359931] usb 1-1.3: Manufacturer: Realtek
[ 4.359947] usb 1-1.3: SerialNumber: 00e04c000001
[ 4.438382] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
[ 4.557876] usb 1-1.5: New USB device found, idVendor=0bc7, idProduct=0006
[ 4.557897] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.557914] usb 1-1.5: Product: USB Receiver
[ 4.557930] usb 1-1.5: Manufacturer: X10 Wireless Technology Inc
[ 5.080779] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 7.010940] i2c_dev: disagrees about version of symbol module_layout
[ 7.118329] uinput: disagrees about version of symbol module_layout
[ 7.228003] i2c_dev: disagrees about version of symbol module_layout
[ 8.099954] udevd[331]: starting version 175
[ 8.304840] snd: disagrees about version of symbol module_layout
[ 8.348736] i2c_bcm2708: disagrees about version of symbol module_layout
[ 8.521650] 8192cu: disagrees about version of symbol module_layout
[ 8.538646] lirc_dev: disagrees about version of symbol module_layout
[ 8.578782] rc_core: disagrees about version of symbol module_layout
[ 8.830490] XFS (mmcblk0p1): unknown mount option [nls].
[ 8.831645] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 8.831666] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
[ 8.832292] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
[ 8.832310] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
[ 8.832332] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 8.832346] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
[ 8.832361] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
[ 8.832374] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
[ 14.060946] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 14.061144] random: nonblocking pool is initialized
[ 15.568940] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1
[ 35.248051] i2c_bcm2708: disagrees about version of symbol module_layout
[ 35.443117] lirc_dev: disagrees about version of symbol module_layout
[ 35.444139] rc_core: disagrees about version of symbol module_layout
[ 35.565762] 8192cu: disagrees about version of symbol module_layout
[ 35.589959] snd: disagrees about version of symbol module_layout
[ 119.671789] i2c_bcm2708: disagrees about version of symbol module_layout
[ 119.684220] snd: disagrees about version of symbol module_layout
[ 119.837492] 8192cu: disagrees about version of symbol module_layout
[ 119.920441] lirc_dev: disagrees about version of symbol module_layout
[ 119.921220] rc_core: disagrees about version of symbol module_layout
[ 186.469915] i2c_bcm2708: disagrees about version of symbol module_layout
[ 186.475427] snd: disagrees about version of symbol module_layout
[ 186.745863] 8192cu: disagrees about version of symbol module_layout
[ 186.761799] lirc_dev: disagrees about version of symbol module_layout
[ 186.762635] rc_core: disagrees about version of symbol module_layout
MLD>