[1] Archiv / MLD 4.x / General / ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
 

Online Wanninger

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 560
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« on: March 09, 2015, 17:54:18 »
Hallo Zusammen,

ich wollte am WE meine vorhandene VDR-Server Installation von ..VDR nach MLD wechseln.
Soweit ja kein Problem, nur dass meine vorhandene cineS2 DVB-S2 Twin Tuner Karte nicht
mehr geladen wird.

Die Installation meines bisherigen ..VDR läuft und die Karte wird auch richtig geladen, nur leider
eben unter MLD nicht

Das Ganze läuft in einer VM mit PCI-Passthrough unter ESXi 5.1

dmesg zeigt mir das:

Code: [Select]
MLD> dmesg |grep -i ngene
ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
ngene: Device version 1
ngene: Loading firmware file ngene_18.fw.
ngene: Command timeout cmd=01 prev=00
host_to_ngene (c000): 01 00 00 00 00 00 00 00
ngene_to_host (c100): 00 00 00 00 00 00 00 00
dev->hosttongene (dcda1000): 01 00 00 00 00 00 00 00
dev->ngenetohost (dcda1100): 00 00 00 00 00 00 00 00
ngene: Command timeout cmd=02 prev=00
host_to_ngene (c000): 02 04 00 d0 00 04 00 00
ngene_to_host (c100): 00 00 00 00 00 00 00 00
dev->hosttongene (dcda1000): 02 04 00 d0 00 04 00 00
dev->ngenetohost (dcda1100): 00 00 00 00 00 00 00 00
ngene: probe of 0000:03:00.0 failed with error -1

Vielleicht hat jemand 'ne Idee...

Danke und Gruß Wanninger
Logged
Meine Spielwiese
Spoiler (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #1 on: March 09, 2015, 18:29:34 »
Hi Wanninger

war da nicht irgendwas mit ner .conf die angelegt werden muss das das Modul mit den richtigen Optionen geladen wird?
Logged
Gruß MegaX

Hardware (show / hide)

Online Wanninger

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 560
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #2 on: March 09, 2015, 18:41:43 »
...hab' ich ehrlich gesagt bei dieser Karte bisher noch nicht gehabt.
Diese Karten liefen bei mir bisher immer mit den orignialnen dvb
Treibern out-of-the-box.

Was aber nicht heißen soll, dass es nicht irgendwo so ist.

Wo wäre diese .conf typischerweise zu suchen, dann würde ich im
..VDR mal nachsehen ob da was drin steht.

-Wanninger
Logged
Meine Spielwiese
Spoiler (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #3 on: March 09, 2015, 18:49:52 »
welche Module werden eignedlich geladen und was spricht das Log dazu?
Logged
Gruß MegaX

Hardware (show / hide)

Online Wanninger

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 560
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #4 on: March 09, 2015, 20:19:23 »
so schaut's beim ..VDR aus:

Code: [Select]
root@vdr-148:~# lsmod |fgrep -i ngene
ngene                  28760  14
dvb_core              110061  1 ngene
cxd2099                13320  1 ngene

und so bei MLD:

Code: [Select]
MLD_SERVER> lsmod |grep -i ngene
ngene                  24398  0
cxd2099                 5433  1 ngene
dvb_core               74871  1 ngene

Hier noch ein Ausschnitt aus der messages:

Code: [Select]
Mar  9 20:01:17 (MLD) user.info kernel: TCP: cubic registered
Mar  9 20:01:17 (MLD) user.info kernel: NET: Registered protocol family 10
Mar  9 20:01:17 (MLD) user.notice kernel: sd 2:0:0:0: [sda] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
Mar  9 20:01:17 (MLD) user.notice kernel: sd 2:0:0:0: [sda] Write Protect is off
Mar  9 20:01:17 (MLD) user.debug kernel: sd 2:0:0:0: [sda] Mode Sense: 61 00 00 00
Mar  9 20:01:17 (MLD) user.notice kernel: sd 2:0:0:0: [sda] Cache data unavailable
Mar  9 20:01:17 (MLD) user.err kernel: sd 2:0:0:0: [sda] Assuming drive cache: write through
Mar  9 20:01:17 (MLD) user.info kernel: sit: IPv6 over IPv4 tunneling driver
Mar  9 20:01:17 (MLD) user.info kernel: NET: Registered protocol family 17
Mar  9 20:01:17 (MLD) user.notice kernel: Key type dns_resolver registered
Mar  9 20:01:17 (MLD) user.info kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Mar  9 20:01:17 (MLD) user.info kernel: registered taskstats version 1
Mar  9 20:01:17 (MLD) user.info kernel: Btrfs loaded
Mar  9 20:01:17 (MLD) user.info kernel:  sda: sda1
Mar  9 20:01:17 (MLD) user.notice kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Mar  9 20:01:17 (MLD) user.info kernel:   Magic number: 7:633:40
Mar  9 20:01:17 (MLD) user.info kernel: bdi 7:5: hash matches
Mar  9 20:01:17 (MLD) user.info kernel: rtc_cmos 00:01: setting system clock to 2015-03-09 19:01:16 UTC (1425927676)
Mar  9 20:01:17 (MLD) user.debug kernel: PM: Hibernation image not present or could not be loaded.
Mar  9 20:01:17 (MLD) user.info kernel: ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
Mar  9 20:01:17 (MLD) user.info kernel: ata2.00: configured for UDMA/33
Mar  9 20:01:17 (MLD) user.notice kernel: scsi 1:0:0:0: CD-ROM            NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
Mar  9 20:01:17 (MLD) user.warn kernel: sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
Mar  9 20:01:17 (MLD) user.info kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Mar  9 20:01:17 (MLD) user.debug kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  9 20:01:17 (MLD) user.notice kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  9 20:01:17 (MLD) user.info kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Mar  9 20:01:17 (MLD) user.info kernel: md: Waiting for all devices to be available before autodetect
Mar  9 20:01:17 (MLD) user.info kernel: md: If you don't use raid, use raid=noautodetect
Mar  9 20:01:17 (MLD) user.info kernel: md: Autodetecting RAID arrays.
Mar  9 20:01:17 (MLD) user.info kernel: md: Scanned 0 and added 0 devices.
Mar  9 20:01:17 (MLD) user.info kernel: md: autorun ...
Mar  9 20:01:17 (MLD) user.info kernel: md: ... autorun DONE.
Mar  9 20:01:17 (MLD) user.info kernel: BTRFS: device fsid f0ac79aa-41aa-481c-9dc2-efb8cb39a272 devid 1 transid 12 /dev/root
Mar  9 20:01:17 (MLD) user.info kernel: BTRFS info (device sda1): disk space caching is enabled
Mar  9 20:01:17 (MLD) user.info kernel: VFS: Mounted root (btrfs filesystem) readonly on device 0:12.
Mar  9 20:01:17 (MLD) user.info kernel: Freeing unused kernel memory: 776K (ffffffff817ac000 - ffffffff8186e000)
Mar  9 20:01:17 (MLD) user.info kernel: BTRFS info (device sda1): disk space caching is enabled
Mar  9 20:01:18 (MLD) daemon.info kernel: systemd-udevd[311]: starting version 204
Mar  9 20:01:18 (MLD) user.err kernel: piix4_smbus 0000:00:07.3: SMBus Host Controller not enabled!
Mar  9 20:01:18 (MLD) user.info kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Mar  9 20:01:18 (MLD) user.info kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Mar  9 20:01:18 (MLD) user.err kernel: WARNING: You are using an experimental version of the media stack.
Mar  9 20:01:18 (MLD) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Mar  9 20:01:18 (MLD) user.err kernel:  enough quality for its usage in production.
Mar  9 20:01:18 (MLD) user.err kernel:  Use it with care.
Mar  9 20:01:18 (MLD) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Mar  9 20:01:18 (MLD) user.err kernel:  dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Mar  9 20:01:18 (MLD) user.err kernel:  b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Mar  9 20:01:18 (MLD) user.err kernel:  c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Mar  9 20:01:18 (MLD) user.err kernel:  experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Mar  9 20:01:18 (MLD) user.err kernel:  v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Mar  9 20:01:18 (MLD) user.info kernel: nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
Mar  9 20:01:18 (MLD) user.info kernel: ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
Mar  9 20:01:18 (MLD) user.info kernel: ngene: Device version 1
Mar  9 20:01:18 (MLD) user.info kernel: ngene: Loading firmware file ngene_18.fw.
Mar  9 20:01:18 (MLD) user.info kernel: e1000 0000:02:00.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:df:85:82
Mar  9 20:01:18 (MLD) user.info kernel: e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
Mar  9 20:01:20 (MLD) user.err kernel: ngene: Command timeout cmd=01 prev=00
Mar  9 20:01:20 (MLD) user.err kernel: host_to_ngene (c000): 01 00 00 00 00 00 00 00
Mar  9 20:01:20 (MLD) user.err kernel: ngene_to_host (c100): 00 00 00 00 00 00 00 00
Mar  9 20:01:20 (MLD) user.err kernel: dev->hosttongene (ffff88001decd000): 01 00 00 00 00 00 00 00
Mar  9 20:01:20 (MLD) user.err kernel: dev->ngenetohost (ffff88001decd100): 00 00 00 00 00 00 00 00
Mar  9 20:01:22 (MLD) user.err kernel: ngene: Command timeout cmd=02 prev=00
Mar  9 20:01:22 (MLD) user.err kernel: host_to_ngene (c000): 02 04 00 d0 00 04 00 00
Mar  9 20:01:22 (MLD) user.err kernel: ngene_to_host (c100): 00 00 00 00 00 00 00 00
Mar  9 20:01:22 (MLD) user.err kernel: dev->hosttongene (ffff88001decd000): 02 04 00 d0 00 04 00 00
Mar  9 20:01:22 (MLD) user.err kernel: dev->ngenetohost (ffff88001decd100): 00 00 00 00 00 00 00 00
Mar  9 20:01:22 (MLD) user.warn kernel: ngene: probe of 0000:03:00.0 failed with error -1
Mar  9 20:01:26 (MLD) user.info kernel: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Mar  9 20:01:57 (MLD) user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar  9 20:01:57 (MLD) user.warn kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Mar  9 20:01:57 (MLD) user.info kernel: NFSD: starting 90-second grace period (net ffffffff81797340)
Mar  9 20:01:57 (MLD) daemon.notice rpc.mountd[1243]: Version 1.2.8 starting
Mar  9 20:02:03 (MLD) user.err vdr: [932] ERROR (svdrp.c,428): Broken pipe
Mar  9 20:02:06 (MLD) user.err vdr: [932] ERROR (svdrp.c,428): Broken pipe

-Wanninger
Logged
Meine Spielwiese
Spoiler (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #5 on: March 09, 2015, 22:34:03 »
Hi

versuch mal ob es hilft wenn du folgendes in deiner VM-Config hinzufügst:

Code: [Select]
...
pciPassthru0.msiEnabled = "FALSE"
...
Logged
Gruß MegaX

Hardware (show / hide)

Online Wanninger

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 560
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #6 on: March 09, 2015, 23:31:08 »
...leider auch nicht.

Code: [Select]
Mar  9 22:53:10 (MLD) daemon.info kernel: systemd-udevd[314]: starting version 204
Mar  9 22:53:10 (MLD) user.err kernel: piix4_smbus 0000:00:07.3: SMBus Host Controller not enabled!
Mar  9 22:53:10 (MLD) user.info kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Mar  9 22:53:10 (MLD) user.info kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Mar  9 22:53:10 (MLD) user.err kernel: WARNING: You are using an experimental version of the media stack.
Mar  9 22:53:10 (MLD) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Mar  9 22:53:10 (MLD) user.err kernel:  enough quality for its usage in production.
Mar  9 22:53:10 (MLD) user.err kernel:  Use it with care.
Mar  9 22:53:10 (MLD) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Mar  9 22:53:10 (MLD) user.err kernel:  dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Mar  9 22:53:10 (MLD) user.err kernel:  b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Mar  9 22:53:10 (MLD) user.err kernel:  c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Mar  9 22:53:10 (MLD) user.err kernel:  experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Mar  9 22:53:10 (MLD) user.err kernel:  v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Mar  9 22:53:10 (MLD) user.info kernel: nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
Mar  9 22:53:10 (MLD) user.info kernel: ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
Mar  9 22:53:10 (MLD) user.info kernel: ngene: Device version 1
Mar  9 22:53:10 (MLD) user.info kernel: e1000 0000:02:00.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:df:85:82
Mar  9 22:53:10 (MLD) user.info kernel: e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
Mar  9 22:53:10 (MLD) user.info kernel: ngene: Loading firmware file ngene_18.fw.
Mar  9 22:53:12 (MLD) user.err kernel: ngene: Command timeout cmd=01 prev=00
Mar  9 22:53:12 (MLD) user.err kernel: host_to_ngene (c000): 01 00 00 00 00 00 00 00
Mar  9 22:53:12 (MLD) user.err kernel: ngene_to_host (c100): 00 00 00 00 00 00 00 00
Mar  9 22:53:12 (MLD) user.err kernel: dev->hosttongene (ffff88001db2a000): 01 00 00 00 00 00 00 00
Mar  9 22:53:12 (MLD) user.err kernel: dev->ngenetohost (ffff88001db2a100): 00 00 00 00 00 00 00 00
Mar  9 22:53:14 (MLD) user.err kernel: ngene: Command timeout cmd=02 prev=00
Mar  9 22:53:14 (MLD) user.err kernel: host_to_ngene (c000): 02 04 00 d0 00 04 00 00
Mar  9 22:53:14 (MLD) user.err kernel: ngene_to_host (c100): 00 00 00 00 00 00 00 00
Mar  9 22:53:14 (MLD) user.err kernel: dev->hosttongene (ffff88001db2a000): 02 04 00 d0 00 04 00 00
Mar  9 22:53:14 (MLD) user.err kernel: dev->ngenetohost (ffff88001db2a100): 00 00 00 00 00 00 00 00
Mar  9 22:53:14 (MLD) user.warn kernel: ngene: probe of 0000:03:00.0 failed with error -1
Mar  9 22:53:18 (MLD) user.info kernel: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Mar  9 22:53:49 (MLD) user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar  9 22:53:49 (MLD) user.warn kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Mar  9 22:53:49 (MLD) user.info kernel: NFSD: starting 90-second grace period (net ffffffff81797340)
Mar  9 22:53:49 (MLD) daemon.notice rpc.mountd[1184]: Version 1.2.8 starting
Mar  9 22:54:00 (MLD) auth.info login[1402]: root login on 'tty1'
Mar  9 22:54:00 (MLD) auth.info login[1403]: root login on 'tty2'
Mar  9 22:54:00 (MLD) auth.info login[1404]: root login on 'tty3'
Mar  9 22:54:00 (MLD) auth.info login[1408]: root login on 'tty4'

Wäre es möglich, dass es ein Problem des Kernels/der Module ist?

Zum Test habe ich mal mit einer 7.2 Knoppix das Modul geladen, bringt
aber auch den selben Fehler.

Ich gehe mal davon aus, dass es "nur" sowas in der Art sein kann.
Ich spiele mich jetzt mal ein wenig mit den DVB Treibern.

Die "Kiste" unter der es läuft, setzt auf Ubuntu-12.04 mit Kernel 3.2.xxx auf.

-Wanninger
Logged
Meine Spielwiese
Spoiler (show / hide)

Online Wanninger

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 560
    • View Profile
ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
« Reply #7 on: March 10, 2015, 01:21:17 »
Ich habs noch mit Kubuntu-12.04.2 und Kubuntu-14.10 in der MLD VM probiert,
und beide OS'ses konnten die Karte in Betrieb nehmen.

-Wanninger
Logged
Meine Spielwiese
Spoiler (show / hide)

[1] Archiv / MLD 4.x / General / ESXi 5.1 - cineS2 DVB-S2 Twin Tuner (v5) wird nicht geladen
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.