Archiv > Banana PI
WLAN Banana Pi Pro
pbriesch:
Hallo,
um herauszufinden, wie man beim Banana Pi Pro das integrierte WLAN ans Laufen bekommt, habe ich Bananian (auf Debian Wheezy basierend) installiert.
Die Datei /etc/modules habe ich um den Eintrag ap6210 erweitert.
--- Code: ---Linux version 3.4.104+ (root@nico-desktop) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Thu Jan 8 15:40:40 CET 2015
--- End code ---
--- Code: ---root@bananapi ~ # dmesg | grep ap6210
[ 115.460546] [ap6210] --->The Drive has been modified for BananaPro by LeMaker team<---
[ 115.471695] [ap6210] select wifi ap6210
[ 115.479080] [ap6210] Initializing ap6210.
[ 115.488621] [ap6210] Succeed to set the gpio ap6210_wl_vdd_en to 0
[ 115.500543] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 115.840620] [ap6210] WLAN placed in POWER ON
[ 116.159294] [ap6210] Linux Kernel SDIO/MMC Driver
[ 116.219264] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 116.246072] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 116.296998] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 116.327062] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 116.595848] [ap6210] WLAN placed in RESET
[ 116.776568] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 116.801153] [ap6210] Compiled in drivers/net/wireless/ap6210 on Jan 8 2015 at 15:39:08.
[ 116.825783] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 117.126017] [ap6210] WLAN going back to live
[ 117.564385] [ap6210] dhd_bus_devreset: WLAN ON
[ 117.582272] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 117.602053] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 117.622631] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 117.911170] [ap6210] Dongle ready, protocol version 4
[ 117.928289] [ap6210] Dongle ready, protocol version 4
[ 117.950690] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 117.984141] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 118.003969] [ap6210] Chip: a962 Rev 1 Pkg 9
[ 708.676762] [ap6210] Reason 3
[ 708.718827] [ap6210] Link down Reason : WLC_E_LINK
[ 708.768394] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
[ 708.790450] [ap6210] bcmsdh_set_irq Flag = 0
[ 708.810631] [ap6210] dhd_bus_devreset: WLAN OFF DONE
[ 708.832801] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 709.174178] [ap6210] WLAN placed in RESET
[ 725.353486] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 725.378175] [ap6210] Compiled in drivers/net/wireless/ap6210 on Jan 8 2015 at 15:39:08.
[ 725.402998] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 725.743922] [ap6210] WLAN going back to live
[ 726.225738] [ap6210] dhd_bus_devreset: WLAN ON
[ 726.246795] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 726.266428] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 726.286836] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 726.567489] [ap6210] bcmsdh_set_irq Flag = 1
[ 726.582701] [ap6210] dhd_bus_devreset: WLAN ON DONE
[ 726.598951] [ap6210] Dongle ready, protocol version 4
[ 726.615536] [ap6210] Dongle ready, protocol version 4
[ 726.636790] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 726.670071] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 726.689532] [ap6210] Chip: a962 Rev 1 Pkg 9
root@bananapi ~ #
--- End code ---
--- Code: ---root@bananapi /lib/firmware/ap6210 # ls -All
total 668
-rw-r--r-- 1 root root 26621 Jan 8 15:44 bcm20710a1.hcd
-rw-r--r-- 1 root root 206163 Jan 8 15:44 fw_bcm40181a2_apsta.bin
-rw-r--r-- 1 root root 219557 Jan 8 15:44 fw_bcm40181a2.bin
-rw-r--r-- 1 root root 219557 Jan 8 15:44 fw_bcm40181a2_p2p.bin
-rw-r--r-- 1 root root 1178 Jan 8 15:44 nvram_ap6210.txt
root@bananapi /lib/firmware/ap6210 #
--- End code ---
--- Code: ---root@bananapi /lib/firmware/ap6210 # lsmod
Module Size Used by
ap6210 624553 0
cfg80211 172231 1 ap6210
cpufreq_stats 5908 0
cpufreq_userspace 3524 0
cpufreq_conservative 5712 0
cpufreq_powersave 1242 0
8021q 18593 0
garp 6072 1 8021q
stp 2032 1 garp
llc 5365 2 stp,garp
root@bananapi /lib/firmware/ap6210 #
--- End code ---
Ich hoffe, dass der geneigte MLD-Entwickler damit etwas anfangen kann um in Zukunft den integrierten WLAN-Chip des Banana Pi Pro zu unterstützen.
Schöne Grüße, Paul
MegaX:
Hi
ich schau mir das an. Danke für die ausführliche Info :)
clausmuus:
Funktioniert denn nun das wlan oder funktioniert es nicht?
Claus
mafe68:
Bei dem Banana Pro gibt es bei jedem OS Probleme mit dem Wlan. So wirklich was ich gelesen habe, hat es noch bei keinem richtig funktioniert.
pbriesch:
Mit Bananian https://www.bananian.org funktioniert es.
Navigation
[0] Message Index
[#] Next page
Go to full version