Archiv > Banana PI
WLAN Banana Pi Pro
pbriesch:
--- Code: ---MLD> lsmod
Module Size Used by Not tainted
uinput 6485 0
MLD> modprobe -v ap6210
modprobe: can't load module ap6210 (kernel/drivers/net/wireless/ap6210/ap6210.ko): No such device
MLD> lsmod
Module Size Used by Not tainted
cfg80211 172231 0
uinput 6485 0
MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.103.158 (devel@nightbuild-bpi) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 SMP PREEMPT Mon Mar 16 09:19:27 CET 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
........
........
[ 66.034873] cfg80211: Calling CRDA to update world regulatory domain
[ 66.065613] [ap6210] --->The Drive has been modified for BananaPro by LeMaker team<---
[ 66.071144] [ap6210] parse sdio_wifi_pro_used failed in script.fex.
[ 66.076830] [ap6210] No wifi type selected, please check your config.
[ 66.220274] [ap6210] WLAN placed in POWER ON
[ 68.217329] [ap6210] failed to power up wifi chip, retry again (4 left) **
[ 68.217340]
[ 68.222837] [ap6210] No wifi type selected, please check your config.
[ 68.226224] [ap6210] WLAN placed in POWER OFF
[ 68.232129] [ap6210] No wifi type selected, please check your config.
[ 68.375513] [ap6210] WLAN placed in POWER ON
[ 70.377328] [ap6210] failed to power up wifi chip, retry again (3 left) **
[ 70.377338]
[ 70.382848] [ap6210] No wifi type selected, please check your config.
[ 70.386225] [ap6210] WLAN placed in POWER OFF
[ 70.392132] [ap6210] No wifi type selected, please check your config.
[ 70.535531] [ap6210] WLAN placed in POWER ON
[ 72.537335] [ap6210] failed to power up wifi chip, retry again (2 left) **
[ 72.537345]
[ 72.542844] [ap6210] No wifi type selected, please check your config.
[ 72.546229] [ap6210] WLAN placed in POWER OFF
[ 72.552909] [ap6210] No wifi type selected, please check your config.
[ 72.689612] [ap6210] WLAN placed in POWER ON
[ 74.687363] [ap6210] failed to power up wifi chip, retry again (1 left) **
[ 74.687373]
[ 74.692891] [ap6210] No wifi type selected, please check your config.
[ 74.696255] [ap6210] WLAN placed in POWER OFF
[ 74.702607] [ap6210] failed to power up wifi chip, max retry reached, exits **
[ 74.702615]
MLD>
--- End code ---
:'(
MegaX:
Danke fürs testen.
Das heißt schonmal das es nicht mehr am Treiber liegt sondern an der fehlenden config in der .fex.
Schau mir das nochmal an.
MegaX:
Hi Paul
mach mir mal bitte den Gefallen und tausch mal auf deiner SD-Karte die script.bin mit der aus dem angehängten Archiv, und schau mal obs dann geht.
pbriesch:
Sieht gut aus:
--- Code: ---MLD> lsmod
Module Size Used by Not tainted
uinput 6485 0
MLD> modprobe -v ap6210
MLD> lsmod
Module Size Used by Not tainted
ap6210 624561 0
cfg80211 172231 1 ap6210
uinput 6485 0
MLD>
--- End code ---
--- Code: ---MLD>dmesg
...
[ 728.347727] cfg80211: Calling CRDA to update world regulatory domain
[ 728.382132] [ap6210] --->The Drive has been modified for BananaPro by LeMaker team<---
[ 728.384958] [ap6210] select wifi ap6210
[ 728.390070] [ap6210] Initializing ap6210.
[ 728.395824] [ap6210] Succeed to set the gpio ap6210_wl_vdd_en to 0
[ 728.402606] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 728.544320] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 728.547555] [mmc-msg] sdc3 power on
[ 728.571007] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 728.578212] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 728.658354] [mmc-err] smc 3 err, cmd 52, RTO
[ 728.662580] [mmc-err] smc 3 err, cmd 52, RTO
[ 728.671626] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 728.679941] [ap6210] WLAN placed in POWER ON
[ 728.688297] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 728.695148] [mmc-err] smc 3 err, cmd 8, RTO
[ 728.703925] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 728.718434] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 728.724454] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 728.731030] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 728.740213] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 728.762841] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 728.771776] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 728.777268] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 728.843161] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 728.850754] mmc1: new high speed SDIO card at address 0001
[ 728.855933] [ap6210] Linux Kernel SDIO/MMC Driver
[ 728.901794] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 728.912446] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 728.918461] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 728.935353] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 729.226102] [ap6210] WLAN placed in RESET
MLD>
--- End code ---
--- Code: ---MLD> modprobe -v 8021q
MLD> lsmod
Module Size Used by Not tainted
8021q 18593 0
garp 6072 1 8021q
stp 2032 1 garp
llc 5365 2 garp,stp
ap6210 624561 0
cfg80211 172231 1 ap6210
uinput 6485 0
MLD>
--- End code ---
--- Code: ---MLD>dmesg
.....
[ 1007.123134] 8021q: 802.1Q VLAN Support v1.8
MLD> ifconfig
eth0 Link encap:Ethernet HWaddr 02:4E:02:82:93:F9
inet addr:192.168.1.163 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1274267 errors:0 dropped:0 overruns:0 frame:0
TX packets:7193 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1731990561 (1.6 GiB) TX bytes:1133919 (1.0 MiB)
Interrupt:117
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:69 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3947 (3.8 KiB) TX bytes:3947 (3.8 KiB)
MLD>
--- End code ---
Nachdem im Webif das WLAn konfiguriert wurde:
--- Code: ---MLD> ifconfig
eth0 Link encap:Ethernet HWaddr 02:4E:02:82:93:F9
inet addr:192.168.1.163 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1396985 errors:0 dropped:0 overruns:0 frame:0
TX packets:7983 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1898542359 (1.7 GiB) TX bytes:1248881 (1.1 MiB)
Interrupt:117
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:69 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3947 (3.8 KiB) TX bytes:3947 (3.8 KiB)
wlan0 Link encap:Ethernet HWaddr 98:3B:16:E8:66:3D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:324 (324.0 B)
MLD>
--- End code ---
--- Code: ---MLD>dmesg
....
[ 1349.064012] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 1349.071321] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar 16 2015 at 09:48:36.
[ 1349.077876] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 1349.363725] [ap6210] WLAN going back to live
[ 1349.365508] sdio_reset_comm():
[ 1349.374152] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.385616] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.395277] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.400431] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 1349.464542] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.479341] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1349.485483] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1349.491945] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1349.499803] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1349.522550] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.531742] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.537312] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 1349.603092] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1349.607401] [ap6210] dhd_bus_devreset: WLAN ON
[ 1349.613727] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1349.620366] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 1349.627596] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1349.912582] [ap6210] Dongle ready, protocol version 4
[ 1349.917483] [ap6210] Dongle ready, protocol version 4
[ 1349.928647] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 1349.948574] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 1349.951815] [ap6210] Chip: a962 Rev 1 Pkg 9
[ 1360.561630] wlan0: no IPv6 routers present
MLD>
--- End code ---
Nachdem nun im Webif der Kanal auf WLAN Channel auf 1 und WALN Crypt auf WPA2 und dann abgespeichert wurde:
--- Code: ---[ 1656.647871] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
[ 1656.651407] [ap6210] bcmsdh_set_irq Flag = 0
[ 1656.655566] [ap6210] dhd_bus_devreset: WLAN OFF DONE
[ 1656.660737] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 1656.944458] [ap6210] WLAN placed in RESET
[ 1657.579925] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 1657.590301] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar 16 2015 at 09:48:36.
[ 1657.596446] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 1657.884027] [ap6210] WLAN going back to live
[ 1657.885955] sdio_reset_comm():
[ 1657.894779] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1657.906720] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1657.916655] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1657.921848] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 1657.985846] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1658.000215] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1658.006412] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1658.014117] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1658.021563] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1658.044522] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1658.053752] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1658.059623] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 1658.123369] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1658.127473] [ap6210] dhd_bus_devreset: WLAN ON
[ 1658.138407] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1658.144674] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 1658.151697] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1658.431446] [ap6210] bcmsdh_set_irq Flag = 1
[ 1658.435463] [ap6210] dhd_bus_devreset: WLAN ON DONE
[ 1658.439883] [ap6210] Dongle ready, protocol version 4
[ 1658.445344] [ap6210] Dongle ready, protocol version 4
[ 1658.454967] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 1658.477889] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 1658.480932] [ap6210] Chip: a962 Rev 1 Pkg 9
[ 1659.806148] bcmsdh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65305)
[ 1659.809382] [ap6210] scan is not ready
[ 1661.162932] bcmsdh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65305)
[ 1661.166126] [ap6210] scan is not ready
[ 1662.077175] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
[ 1662.082120] [ap6210] bcmsdh_set_irq Flag = 0
[ 1662.086670] [ap6210] dhd_bus_devreset: WLAN OFF DONE
[ 1662.091807] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 1662.369893] [ap6210] WLAN placed in RESET
[ 1662.382713] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 1662.389892] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar 16 2015 at 09:48:36.
[ 1662.395054] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 1662.672342] [ap6210] WLAN going back to live
[ 1662.674158] sdio_reset_comm():
[ 1662.682603] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.693902] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.703560] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.708561] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 1662.772295] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.787349] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1662.793409] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1662.800291] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1662.807972] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1662.830695] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.840091] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.846041] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 1662.908355] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 1662.912247] [ap6210] dhd_bus_devreset: WLAN ON
[ 1662.923114] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1662.929808] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 1662.936662] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 1663.220276] [ap6210] bcmsdh_set_irq Flag = 1
[ 1663.224272] [ap6210] dhd_bus_devreset: WLAN ON DONE
[ 1663.229059] [ap6210] Dongle ready, protocol version 4
[ 1663.233976] [ap6210] Dongle ready, protocol version 4
[ 1663.243905] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 1663.264250] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 1663.267709] [ap6210] Chip: a962 Rev 1 Pkg 9
[ 1664.240958] [ap6210] Escan set error (-16)
[ 1664.243318] [ap6210] error (-16)
[ 1664.246660] [ap6210] Scan err = (-16), busy?-16
[ 1664.249287] [ap6210] scan error (-16)
[ 1673.923056] wlan0: no IPv6 routers present
MLD>
--- End code ---
WLAN0 wurde also erstellt, jedoch konnte per DHCP keine IP zugewiesen werden.
Wenn die Verschlüsselung ausgeschaltet wird, geht das WLAN.
pbriesch:
--- Code: ---MLD> ifconfig
eth0 Link encap:Ethernet HWaddr 02:4E:02:82:93:F9
inet addr:192.168.1.163 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:39218 (38.2 KiB) TX bytes:4476 (4.3 KiB)
Interrupt:117
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:69 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3947 (3.8 KiB) TX bytes:3947 (3.8 KiB)
wlan0 Link encap:Ethernet HWaddr 98:3B:16:E8:66:3D
inet addr:192.168.1.172 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:76 errors:0 dropped:0 overruns:0 frame:0
TX packets:81 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11020 (10.7 KiB) TX bytes:11819 (11.5 KiB)
MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.103.158 (devel@nightbuild-bpi) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 SMP PREEMPT Mon Mar 16 09:19:27 CET 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x4fdfffff ( 190 MB)
[ 0.000000] G2D : 0x4fe00000 - 0x50dfffff ( 16 MB)
[ 0.000000] LCD : 0x50e00000 - 0x52dfffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c09f3b40, node_mem_map d2e00000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @d3608000 s8256 r8192 d16320 u32768
[ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyS0,115200 sunxi_ve_mem_reserve=190 sunxi_g2d_mem_reserve=16 sunxi_fb_mem_reserve=32 disp.screen0_output_mode=EDID:1280x720p50 hdmi.audio=EDID:0 quiet splash=silent nodialog
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 781564k/781564k available, 267012k reserved, 270336K highmem
....
[ 0.575872] NFS: Registering the id_resolver key type
[ 0.580274] NTFS driver 2.1.30 [Flags: R/W].
[ 0.583520] fuse init (API version 7.18)
[ 0.591802] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.595765] Btrfs loaded
[ 0.598493] msgmni has been set to 998
[ 0.605928] alg: No test for stdrng (krng)
[ 0.612627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.615548] io scheduler noop registered
[ 0.618774] io scheduler deadline registered
[ 0.622467] io scheduler cfq registered (default)
[ 0.627321] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.632873] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.637548] [uart]: used uart info.: 0x95
[ 0.642232] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 0.668460] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 0.676863] console [ttyS0] enabled
[ 0.681730] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 0.707912] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 0.712750] [uart]: serial probe 4 irq 49 mapbase 0x01c29000
[ 0.738894] sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
[ 0.743722] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
[ 0.769858] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
[ 0.772383] G2D: drv_g2d_init
[ 0.777105] G2D: g2dmem: g2d_start=4fe00000, g2d_size=1000000
[ 0.780330] G2D: head:cfe00000,tail:d0e00000
[ 0.783667] G2D: Module initialized.major:251
[ 0.792676] brd: module loaded
[ 0.798694] loop: module loaded
[ 0.800976] nand driver is disabled
[ 0.804776] gpio count < =0 ,gpio_count is: 0
[ 0.815046] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 0.819344] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 0.826778] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 0.833237] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 0.836559] scsi0 : sw_ahci_platform
[ 0.843745] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 0.850049] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.856438] emac_init fetch emac using configuration failed
[ 0.858886] emac driver is disabled
[ 0.863296] eth%d: device MAC address 02:4e:02:82:93:f9
[ 0.866291] gmac_para gpio count is 18
[ 0.871512] [gmac]: sun6i_gmac platform driver registration completed
[ 0.874815] PPP generic driver version 2.4.2
[ 0.878768] PPP BSD Compression module registered
[ 0.882773] PPP Deflate Compression module registered
[ 0.887592] PPP MPPE Compression module registered
[ 0.890997] NET: Registered protocol family 24
[ 0.896865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.902061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.904514] [sw-ehci1]: open clock
[ 0.927151] [sw-ehci1]: Set USB Power ON
.....
EGACY(SDR12) dt B
[ 3.051679] [mmc-msg] sdc0 power on
[ 3.089668] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.094576] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 3.167007] [mmc-err] smc 0 err, cmd 52, RTO
[ 3.171159] [mmc-err] smc 0 err, cmd 52, RTO
[ 3.179532] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.190969] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.192896] Console: switching to colour frame buffer device 240x67
[ 3.199450] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.203511] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.207578] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.211627] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.220653] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.229009] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.240441] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.271889] axp20_buck3: incomplete constraints, leaving on
[ 3.276729] axp20_buck2: incomplete constraints, leaving on
[ 3.281447] axp20_ldo4: incomplete constraints, leaving on
[ 3.286201] axp20_ldo3: incomplete constraints, leaving on
[ 3.290942] axp20_ldo2: incomplete constraints, leaving on
[ 3.295678] axp20_ldo1: incomplete constraints, leaving on
[ 3.298684] console [netcon0] enabled
[ 3.302171] netconsole: network logging started
[ 3.306385] otg_wakelock_init: No USB transceiver found
[ 3.319841] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.328290] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.335788] sunxi-rtc sunxi-rtc: setting system clock to 2015-03-18 22:24:04 UTC (1426717444)
[ 3.340924] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[ 3.343045] ALSA device list:
[ 3.346120] #0: sunxi-CODEC Audio Codec
[ 3.348219] #1: sunxi-sndhdmi
[ 3.352875] Waiting for root device /dev/mmcblk0p2...
[ 3.404493] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 3.408978] mmc0: new high speed SDHC card at address aaaa
[ 3.413017] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 3.416424] mmcblk0: p1 p2
[ 3.636308] UDF-fs: warning (device mmcblk0p2): udf_fill_super: No partition found (1)
[ 3.736674] device fsid 6590d27a-d7d8-4959-8f27-5e1a01cf45b8 devid 1 transid 149 /dev/root
[ 3.751607] btrfs: disk space caching is enabled
[ 3.772255] Btrfs detected SSD devices, enabling SSD mode
[ 3.784464] VFS: Mounted root (btrfs filesystem) readonly on device 0:13.
[ 3.789880] devtmpfs: mounted
[ 3.792856] Freeing init memory: 220K
[ 4.247103] btrfs: use ssd allocation scheme
[ 4.250694] btrfs: disk space caching is enabled
[ 6.822036] cfg80211: Calling CRDA to update world regulatory domain
[ 6.902378] [ap6210] --->The Drive has been modified for BananaPro by LeMaker team<---
[ 6.905313] [ap6210] select wifi ap6210
[ 6.908651] [ap6210] Initializing ap6210.
[ 6.913820] [ap6210] Succeed to set the gpio ap6210_wl_vdd_en to 0
[ 6.919258] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 7.072463] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.083819] [mmc-msg] sdc3 power on
[ 7.109709] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.114631] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 7.186988] [mmc-err] smc 3 err, cmd 52, RTO
[ 7.191132] [mmc-err] smc 3 err, cmd 52, RTO
[ 7.199492] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.211338] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.214566] [ap6210] WLAN placed in POWER ON
[ 7.220135] [mmc-err] smc 3 err, cmd 8, RTO
[ 7.228821] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.242631] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 7.248674] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.254645] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.261914] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 7.283838] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 7.292306] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 7.297495] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 7.361106] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 7.368157] mmc1: new high speed SDIO card at address 0001
[ 7.373538] [ap6210] Linux Kernel SDIO/MMC Driver
[ 7.397422] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 7.403154] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 7.673222] [ap6210] WLAN placed in RESET
[ 8.635111] systemd-udevd[343]: starting version 204
[ 8.904813] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 8.928146] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 9.231030] device fsid 6590d27a-d7d8-4959-8f27-5e1a01cf45b8 devid 1 transid 149 /dev/mmcblk0p2
[ 9.298940] REISERFS warning (device mmcblk0p1): super-6502 reiserfs_getopt: unknown mount option "nls=utf8"
[ 9.616795] UDF-fs: bad mount option "nls=utf8" or missing value
[ 9.636159] XFS (mmcblk0p1): unknown mount option [nls].
[ 12.917658] device fsid 6590d27a-d7d8-4959-8f27-5e1a01cf45b8 devid 1 transid 149 /dev/mmcblk0p2
[ 12.932314] device fsid 6590d27a-d7d8-4959-8f27-5e1a01cf45b8 devid 1 transid 149 /dev/mmcblk0p2
[ 21.386287] Warning: this sunxi disp driver will see significant redesign.
[ 21.406154] Applications using /dev/disp directly will break.
[ 21.412521] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[ 21.424358] [DISP] layer allocated: 0,101
[ 21.427338] [DISP] layer allocated: 0,102
[ 23.254777] [DISP] layer released: 0,101
[ 23.257706] [DISP] layer released: 0,102
[ 23.262978] [DISP] layer allocated: 0,101
[ 23.274394] [DISP] layer allocated: 0,102
[ 23.465931] [DISP] layer released: 0,101
[ 23.468847] [DISP] layer released: 0,102
[ 23.474095] [DISP] layer allocated: 0,101
[ 23.477793] [DISP] layer allocated: 0,102
[ 25.475594] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 25.500708] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar 16 2015 at 09:48:36.
[ 25.536492] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 27.074460] [ap6210] WLAN going back to live
[ 27.088490] sdio_reset_comm():
[ 27.097646] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.128042] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.170867] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.182019] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 27.246066] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.259768] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 27.265758] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 27.271977] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 27.279535] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 27.301349] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.309840] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.316933] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 27.376064] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 27.381386] [ap6210] dhd_bus_devreset: WLAN ON
[ 27.388903] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 27.394575] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 27.401205] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 27.682203] [ap6210] Dongle ready, protocol version 4
[ 27.687186] [ap6210] Dongle ready, protocol version 4
[ 27.698476] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 27.725650] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 27.729825] [ap6210] Chip: a962 Rev 1 Pkg 9
[ 29.105177] bcmsdh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65305)
[ 29.109071] [ap6210] scan is not ready
[ 30.465721] bcmsdh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65305)
[ 30.468652] [ap6210] scan is not ready
[ 31.829196] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
[ 31.832687] [ap6210] bcmsdh_set_irq Flag = 0
[ 31.836676] [ap6210] dhd_bus_devreset: WLAN OFF DONE
[ 31.841791] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
[ 32.112803] [ap6210] WLAN placed in RESET
[ 32.134740] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
[ 32.142232] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar 16 2015 at 09:48:36.
[ 32.147476] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
[ 32.459310] [ap6210] WLAN going back to live
[ 32.462570] sdio_reset_comm():
[ 32.472069] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.485194] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.495573] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.501174] [mmc-msg] sdc3 set round clock 400000, src 24000000
[ 32.565585] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.579472] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 32.585450] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 32.591631] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 32.598929] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 32.620934] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.629399] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.634623] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 32.698178] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 32.702138] [ap6210] dhd_bus_devreset: WLAN ON
[ 32.712665] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 32.718361] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 32.725028] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
[ 33.000927] [ap6210] bcmsdh_set_irq Flag = 1
[ 33.004904] [ap6210] dhd_bus_devreset: WLAN ON DONE
[ 33.009988] [ap6210] Dongle ready, protocol version 4
[ 33.014947] [ap6210] Dongle ready, protocol version 4
[ 33.024689] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e8:66:3d
[ 33.044522] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 33.047693] [ap6210] Chip: a962 Rev 1 Pkg 9GMAC gpio_power_hd:gpio_direction_output
[ 39.474517] eth0: device MAC address 02:4e:02:82:93:f9
[ 39.506663] sunxi_gmac: probed
[ 39.512082] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 39.516939] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 44.514623] PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
[ 56.274373] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 56.305802] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
[ 56.357932] udevd[1853]: error changing net interface name wlan0 to wlan1: Device or resource busy
MLD>
--- End code ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version