Archiv > Banana PI
DVBSKy S960 DVB-S/S2 USB
mafe68:
Das DVBSky Paket gab es bist vor kurzen noch nicht für das Bpi. Das hat Andi erst gebaut aber da hast du recht das es im DVB Paket auch beim BPi rein gekommen ist.
sailer:
^Hallo
Ich habe bei der Neuinstallation überhauptnichts zusätzlich aufgespielt.
Ich habe momentan den BPI nicht angeschlossen.
System
Name: MLD
Version: 4.0.1-bpi
Package Version
alsa 1.0.27.2-20_3.4.103.164
at 3.1.14-2
base 0-65
btrfs 3.12-90
busybox 1.23.1-38
dvb 1:2015.03.20-120_3.4.103.164
eventlircd 2015.03.20-24_3.4.103.164
font-config 0-4
hdparm 9.43-2
i2c 0-4_3.4.103.164
init 0-63
install 0-82
irkeytable 1.0.1-7
kernel 3.4.103.164-165
ldconfig 2.19-10
lirc 1:2014.05.09-65_3.4.103.164
locales 0-16
mld-remote 0-31
network 0-46_3.4.103.164
opkg 2015.03.01-84
opkg-fixes 0-3
pam 1.1.8-3
psplash 2009.05.28-17
samba 4.1.6-18
scan 20130331-42
ssh 0-11
tools 0-13
udev 204-31
vdr 2.2.0.174-176
vdr-plugin-opkg 0.1.0-23_2.2.0.174
vdr-plugin-setup 0.3.1-26_2.2.0.174
vdr-plugin-softhddevice 2015.03.10-53_2.2.0.174
vfat 0-1
webserver 0-192
xfs 0-5
xorg 1.15.1-48_3.4.103.164
Disks
Filesystem Size Used Available Use% Mounted on
/dev/root 9.3G 129.4M 8.9G 1% /
/dev/mmcblk0p2 9.3G 129.4M 8.9G 1% /media/sd-mmcblk0p2
/dev/mmcblk0p3 21.5G 32.2M 21.5G 0% /media/sd-mmcblk0p3
Modules
Module Size Used by Tainted: G
mt2060 4509 1
af9013 22286 1
dvb_usb_af9015 24084 1
dvb_usb_v2 27524 1 dvb_usb_af9015
dvb_core 108360 1 dvb_usb_v2
rc_core 22054 3 dvb_usb_af9015,dvb_usb_v2
uinput 6485 0
i2c_dev 7377 0
Status
Mem: 130032K used, 651752K free, 396K shrd, 1684K buff, 74380K cached
CPU: 0% usr 5% sys 0% nic 95% idle 0% io 0% irq 0% sirq
Network
eth0 Link encap:Ethernet HWaddr 02:03:07:00:90:FC
inet addr:192.168.2.126 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:730 errors:0 dropped:0 overruns:0 frame:0
TX packets:400 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:87466 (85.4 KiB) TX bytes:288128 (281.3 KiB)
Interrupt:117
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:67 errors:0 dropped:0 overruns:0 frame:0
TX packets:67 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3847 (3.7 KiB) TX bytes:3847 (3.7 KiB)
Gruß
Manfred
Torsten73:
Da fehlt auf jeden Fall was, zum Vergleich:
--- Code: ---Module Size Used by Tainted: G
...
rc_dvbsky 909 0
...
dvb_usb_dvbsky 7337 22
dvb_usb_v2 13154 1 dvb_usb_dvbsky
...
dvb_core 85027 3 m88ds3103,dvb_usb_dvbsky,dvb_usb_v2
...
rc_dvbsky,dvb_usb_dvbsky,dvb_usb_v2,ir_xmp_decoder,ir_mce_kbd_decoder,ir_sharp_decoder,ir_sony_decoder,ir_sanyo_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,rc_rc6_mce,mceusb
...
--- End code ---
was bringt Dein
--- Code: ---MLD-Raspi2> dmesg | grep dvb
[ 12.582460] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
[ 12.582460] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 12.765445] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
[ 12.765445] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 13.000302] usb 1-1.5: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[ 13.001922] usb 1-1.5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 13.003438] usb 1-1.5: dvb_usb_v2: MAC address: 00:18:42:54:96:0c
[ 13.159959] Registered IR keymap rc-dvbsky
[ 13.161092] usb 1-1.5: dvb_usb_v2: schedule remote query interval to 300 msecs
[ 13.161130] usb 1-1.5: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[ 13.161335] usbcore: registered new interface driver dvb_usb_dvbsky
[ 34.539542] i2c i2c-2: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
--- End code ---
Meines Erachtens nach dürfte sich dein Bpi nicht anders verhalten. Erstmal muß dmesg passen. Wird eine Firmware geladen? Zur Not noch die lsusb Ausgabe.
sailer:
/var/log/messages
--- Code: ---Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114582] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114589] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114598] b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114606] c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114614] experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.114626] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235703] WARNING: You are using an experimental version of the media stack.
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235728] As the driver is backported to an older kernel, it doesn't offer
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235735] enough quality for its usage in production.
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235740] Use it with care.
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235744] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235752] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235760] b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235769] c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235776] experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Apr 4 16:28:52 (MLD-BPI) user.err kernel: [ 8.235788] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Apr 4 16:28:52 (MLD-BPI) user.info kernel: [ 8.497872] usb 4-1: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
Apr 4 16:28:52 (MLD-BPI) user.info kernel: [ 8.506623] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
Apr 4 16:28:52 (MLD-BPI) user.info kernel: [ 8.512755] DVB: registering new adapter (DVBSky S960/S860)
Apr 4 16:28:52 (MLD-BPI) user.info kernel: [ 8.522512] usb 4-1: dvb_usb_v2: MAC address: 00:17:42:54:96:01
Apr 4 16:28:53 (MLD-BPI) user.info kernel: [ 8.736145] device fsid bf237b3e-4e31-4b78-84c7-bfd99551853e devid 1 transid 206 /dev/mmcblk0p2
Apr 4 16:28:53 (MLD-BPI) user.warn kernel: [ 8.772733] m88ds3103: Unknown symbol i2c_del_mux_adapter (err 0)
Apr 4 16:28:53 (MLD-BPI) user.warn kernel: [ 8.780173] m88ds3103: Unknown symbol i2c_add_mux_adapter (err 0)
Apr 4 16:28:53 (MLD-BPI) user.err kernel: [ 8.785294] DVB: Unable to find symbol m88ds3103_attach()
Apr 4 16:28:53 (MLD-BPI) user.err kernel: [ 8.788932] usb 4-1: dvbsky_s960_attach fail.
Apr 4 16:28:53 (MLD-BPI) user.info kernel: [ 8.810807] usbcore: registered new interface driver dvb_usb_dvbsky
Apr 4 16:28:53 (MLD-BPI) user.warn kernel: [ 8.819587] REISERFS warning (device mmcblk0p1): super-6502 reiserfs_getopt: unknown mount option "nls=utf8"
Apr 4 16:28:53 (MLD-BPI) user.err kernel: [ 9.066873] UDF-fs: bad mount option "nls=utf8" or missing value
Apr 4 16:28:53 (MLD-BPI) user.warn kernel: [ 9.086330] XFS (mmcblk0p1): unknown mount option [nls].
Apr 4 16:28:53 (MLD-BPI) user.warn kernel: [ 9.170608] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (1)
Apr 4 16:28:53 (MLD-BPI) user.notice kernel: [ 9.187475] XFS (mmcblk0p3): Mounting Filesystem
Apr 4 16:28:53 (MLD-BPI) user.info kernel: [ 9.352631] XFS (mmcblk0p3): Ending clean mount
Apr 4 16:28:57 (MLD-BPI) user.info kernel: [ 13.027188] device fsid bf237b3e-4e31-4b78-84c7-bfd99551853e devid 1 transid 206 /dev/mmcblk0p2
Apr 4 16:29:05 (MLD-BPI) user.err vdr: video/vdpau: doesn't support yuvy video surface
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.027984] Warning: this sunxi disp driver will see significant redesign.
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.032720] Applications using /dev/disp directly will break.
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.047760] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.050773] [DISP] layer allocated: 0,101
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.053746] [DISP] layer allocated: 0,102
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.474991] [DISP] layer released: 0,101
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.477910] [DISP] layer released: 0,102
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.481948] [DISP] layer allocated: 0,101
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.499551] [DISP] layer allocated: 0,102
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.557389] [DISP] layer released: 0,101
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.560281] [DISP] layer released: 0,102
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.564313] [DISP] layer allocated: 0,101
Apr 4 16:29:05 (MLD-BPI) user.warn kernel: [ 21.567294] [DISP] layer allocated: 0,102
Apr 4 16:29:08 (MLD-BPI) user.debug kernel: [ 24.254511] GMAC gpio_power_hd:gpio_direction_output
Apr 4 16:29:09 (MLD-BPI) user.warn kernel: [ 24.936945] eth0: device MAC address 02:03:07:00:90:fc
Apr 4 16:29:09 (MLD-BPI) user.info kernel: [ 25.152003] sunxi_gmac: probed
Apr 4 16:29:09 (MLD-BPI) user.info kernel: [ 25.161572] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
Apr 4 16:29:09 (MLD-BPI) user.info kernel: [ 25.177021] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
Apr 4 16:29:10 (MLD-BPI) daemon.err smbd[1184]: [2015/04/04 16:29:10.608977, 0] ../source3/lib/util_sock.c:446(open_socket_in)
Apr 4 16:29:10 (MLD-BPI) daemon.err smbd[1184]: open_socket_in(): setsockopt: SO_REUSEPORT = true on port 445 failed with error = Protocol not available
Apr 4 16:29:13 (MLD-BPI) user.info kernel: [ 29.184519] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
Apr 4 16:29:38 (MLD-BPI) auth.info login[1786]: root login on 'tty1'
Apr 4 16:29:38 (MLD-BPI) auth.info login[1787]: root login on 'tty2'
Apr 4 16:29:38 (MLD-BPI) auth.info login[1790]: root login on 'tty3'
Apr 4 16:29:38 (MLD-BPI) auth.info login[1794]: root login on 'tty4'System
--- End code ---
Packages
--- Code: ---Name: MLD
Version: 4.0.1-bpi
Package Version
alsa 1.0.27.2-20_3.4.103.164
at 3.1.14-2
base 0-65
btrfs 3.12-90
busybox 1.23.1-38
dvb 1:2015.03.20-120_3.4.103.164
eventlircd 2015.03.20-24_3.4.103.164
font-config 0-4
hdparm 9.43-2
i2c 0-4_3.4.103.164
init 0-63
install 0-82
irkeytable 1.0.1-7
kernel 3.4.103.164-165
ldconfig 2.19-10
lirc 1:2014.05.09-65_3.4.103.164
locales 0-16
mld-remote 0-31
network 0-46_3.4.103.164
opkg 2015.03.01-84
opkg-fixes 0-3
pam 1.1.8-3
psplash 2009.05.28-17
samba 4.1.6-18
scan 20130331-42
ssh 0-11
tools 0-13
udev 204-31
vdr 2.2.0.174-176
vdr-plugin-opkg 0.1.0-23_2.2.0.174
vdr-plugin-setup 0.3.1-26_2.2.0.174
vdr-plugin-softhddevice 2015.03.10-53_2.2.0.174
vfat 0-1
webserver 0-192
xfs 0-5
xorg 1.15.1-48_3.4.103.164
Disks
--- End code ---
--- Code: ---Filesystem Size Used Available Use% Mounted on
/dev/root 9.3G 130.8M 8.9G 1% /
/dev/mmcblk0p2 9.3G 130.8M 8.9G 1% /media/sd-mmcblk0p2
/dev/mmcblk0p3 21.5G 32.2M 21.5G 0% /media/sd-mmcblk0p3
--- End code ---
Modules
--- Code: ---Module Size Used by Tainted: G
dvb_usb_dvbsky 8120 0
dvb_usb_v2 27524 1 dvb_usb_dvbsky
dvb_core 108360 2 dvb_usb_dvbsky,dvb_usb_v2
rc_core 22054 2 dvb_usb_dvbsky,dvb_usb_v2
uinput 6485 0
i2c_dev 7377 0
--- End code ---
Status
--- Code: ---Mem: 126276K used, 655508K free, 344K shrd, 1684K buff, 74756K cached
CPU: 0% usr 4% sys 0% nic 95% idle 0% io 0% irq 0% sirq
--- End code ---
Network
--- Code: ---eth0 Link encap:Ethernet HWaddr 02:03:07:00:90:FC
inet addr:192.168.2.126 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2846 errors:0 dropped:0 overruns:0 frame:0
TX packets:730 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:235932 (230.4 KiB) TX bytes:502083 (490.3 KiB)
Interrupt:117
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:119 errors:0 dropped:0 overruns:0 frame:0
TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6915 (6.7 KiB) TX bytes:6915 (6.7 KiB)
--- End code ---
hallo
Ich hoffe ihr könnt etwas damit anfangen.
Er zeigt das modul an , aber es funktionirt nicht (0 Empfänger)
gruß
Manfred
Edit:// Bitte das nächste mal Code-Blöcke benutzen. Danke MegaX
sailer:
hallo
Ich habe jetzt den neuen Raspi dieses DVBSky Paket eingespielt , da funktioniert es. Beim Bananapi ist kein extra Paket dabei. Vieleicht ist das der Grund.
Wenn ich das DVB und das Sky Paket einspiele funktioniert es auch nicht.
Gruß
Manfred
Ich habe noch eine Frage.
Wie komme ich an das drunter liegende Linux ,(Konsole)?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version