Hallo
Nachdem ich beim Bananapi mit meinem DVBSKy S960 DVB-S/S2 USB gescheitert bin ,habe ich jetzt mal versucht beim Raspberry 2 zu installieren.
Bis zum Neustart funktioniert alles , aber danach ist die Unterstützung wieder weg.
Es startet auch nicht mehr mit der Sky Firmware.
System
Name: MLD
Version: 4.0.1-rpi
Package Version
alsa 1.0.25-20_3.19.1.154
at 3.1.13-2
base 0-65
btrfs 0.19-90
busybox 1.23.1-38
dvb 1:2015.03.09-119_3.19.1.154
dvb-sky 141106-8_3.19.1.154
eventlircd 2015.03.09-24_3.19.1.154
font-config 0-4
i2c 0-4_3.19.1.154
init 0-67
install 0-82
irkeytable 1.0.0-7
kernel 3.19.1.154-167
ldconfig 2.13-10
lirc 1:2014.05.09-65_3.19.1.154
locales 0-16
mld-remote 0-31
network 0-46_3.19.1.154
opkg 2015.03.07-84
opkg-fixes 0-3
pam 1.1.3-3
psplash 2009.05.28-17
raspi-copies-and-fills 0.4-1
rpi 0-28
rpi-firmware 2015.03.01-1
scan 20120605-42
ssh 0-11
udev 175-31
vdr 2.2.0.174-180
vdr-plugin-cecremote 0.6.0-6_2.2.0.174
vdr-plugin-opkg 0.1.0-23_2.2.0.174
vdr-plugin-rpihddevice 2015.04.03-25_2.2.0.174
vdr-plugin-setup 0.3.1-26_2.2.0.174
vdr-plugin-suspendoutput 2015.03.01-4_2.2.0.174
vfat 0-1
webserver 0-192
xfs 0-5
Disks
Filesystem Size Used Available Use% Mounted on
/dev/mmcblk0p2 9.3G 102.0M 8.3G 1% /
/dev/mmcblk0p2 9.3G 102.0M 8.3G 1% /media/sd-mmcblk0p2
/dev/mmcblk0p3 19.6G 32.2M 19.6G 0% /media/sd-mmcblk0p3
/dev/mmcblk0p3 19.6G 32.2M 19.6G 0% /mnt/data
Modules
Module Size Used by Tainted: G
snd_soc_tas5713 4968 0
snd_soc_wm8804 7284 0
regmap_spi 1732 1 snd_soc_wm8804
snd_soc_pcm512x_i2c 1685 0
snd_soc_pcm512x 7063 1 snd_soc_pcm512x_i2c
regmap_i2c 2273 3 snd_soc_tas5713,snd_soc_wm8804,snd_soc_pcm512x_i2c
dvb_core 66840 0
snd_soc_bcm2708_i2s 6344 0
regmap_mmio 2949 1 snd_soc_bcm2708_i2s
rc_core 14636 0
snd_soc_core 134947 4 snd_soc_tas5713,snd_soc_wm8804,snd_soc_pcm512x,snd_soc_bcm2708_i2s
snd_compress 7638 1 snd_soc_core
snd_pcm_dmaengine 3323 1 snd_soc_core
i2c_bcm2708 4964 0
snd_bcm2835 18668 0
snd_pcm 75296 4 snd_soc_wm8804,snd_soc_core,snd_pcm_dmaengine,snd_bcm2835
snd_timer 17630 1 snd_pcm
snd 51614 5 snd_soc_core,snd_compress,snd_bcm2835,snd_pcm,snd_timer
uinput 7169 0
i2c_dev 5662 0
Status
Mem: 105156K used, 775976K free, 304K shrd, 1428K buff, 68680K cached
CPU: 0% usr 2% sys 0% nic 97% idle 0% io 0% irq 0% sirq
Network
eth0 Link encap:Ethernet HWaddr B8:27:EB:D5:66:4D
inet addr:192.168.2.127 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2214 errors:0 dropped:0 overruns:0 frame:0
TX packets:1296 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2231301 (2.1 MiB) TX bytes:362735 (354.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2860 (2.7 KiB) TX bytes:2860 (2.7 KiB)
Was kann das sein ?
Gruß
Manfred