Hallo zusammen,
wie gestern im Videochat besprochen, hier mal mein Test mit dem aktuellen netinstall (MLD-5.0.0_netinstall_2015.07.20-151+1139_amd64.iso) und meiner backup-config von der MLD 4.0.2. Bin wie folgt vorgegangen:
- netinstall.iso auf USB Stick installiert
- backup-config ins root-Verzeichnis des Sticks kopiert
- vom Stick gebootet
- Installation und dann old-config ausgewählt
- Installation auf den Stick von dem ich gebootet habe
- danach installiertes System gestartet
Bei der Installation scheinen bestimmte Pakete nicht gefunden zu werden - siehe nachfolgende Startmeldungen:
The number of cylinders for this disk is set to 15283.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Partition number (1-4): First cylinder (2-30008, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-30008, default 30008):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (9540-30008, default 9540): Using default value 9540
Last cylinder or +size or +sizeM or +sizeK (9540-30008, default 30008): Using default value 30008
Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table
/dev/sdf:
Disk /dev/sdf: 31.4 GB, 31466323968 bytes
64 heads, 32 sectors/track, 30008 cylinders, total 61457664 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 * 2048 19535871 9766912 83 Linux
/dev/sdf2 19535872 61456383 20960256 83 Linux
E: Unable to locate package i2c
E: Unable to locate package irkeytable
E: Unable to locate package lirc
E: Unable to locate package mld-remote
E: Unable to locate package nfs-common
E: Unable to locate package nfs-server
E: Unable to locate package nss-mdns
E: Unable to locate package openssl
E: Unable to locate package pam
E: Unable to locate package pearldpf-simple
E: Unable to locate package perl
E: Unable to locate package perl-base
E: Unable to locate package python
E: Unable to locate package python-avahi
E: Unable to locate package python-gobject-2
E: Unable to locate package rc-core
E: Unable to locate package sensors
E: Unable to locate package vdpauinfo
E: Unable to locate package vdr
E: Unable to locate package vdr-plugin-apt
E: Unable to locate package vdr-plugin-control
E: Unable to locate package vdr-plugin-epg2vdr
E: Unable to locate package vdr-plugin-epgsearch
E: Unable to locate package vdr-plugin-graphlcd
E: Unable to locate package vdr-plugin-remoteosd
E: Unable to locate package vdr-plugin-remotetimers
E: Unable to locate package vdr-plugin-setup
E: Unable to locate package vdr-plugin-skindesigner
E: Unable to locate package vdr-plugin-softhddevice
E: Unable to locate package vdr-plugin-streamdev-client
E: Unable to locate package vdr-plugin-svdrpservice
E: Unable to locate package vdr-plugin-tvguideng
E: Unable to locate package vdr-plugin-weatherforecast
E: Unable to locate package xorg
E: Unable to locate package xorg-autodetect
E: Unable to locate package xorg-nvidia
Building dependency tree...
Reading state information...
Starting webserver:
[[1A[[1000C[[10D[[1;32mdone[[0;39m
Starting acpid
[[1A[[1000C[[10D[[1;32mdone[[0;39m
Starting ssh:
Listen on IP: 10.132.128.101
[[1A[[1000C[[10D[[1;32mdone[[0;39m
Starting ntp-client
[[1A[[1000C[[10D[[1;32mdone[[0;39m
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
install-net
0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded.
After this operation, 61,4 kB disk space will be freed.
(Reading database ... M(Reading database ... 30%M(Reading database ... 35%M(Reading database ... 40%M(Reading database ... 45%M(Reading database ... 50%M(Reading database ... 80%M(Reading database ... 85%M(
Reading database ... 90%M(Reading database ... 95%M(Reading database ... 100%M(Reading database ... 836 files and directories currently installed.)M
Removing install-net (0-57) ...M
und System Informationen:
System
Name: MLD-WoZi
Version: 5.0.0
Package Version
apt 1.0.9.8-48
backup 1-15
base 0-78
btrfs 3.17-99
busybox 1.23.2-45
dpkg 1.17.25-15
dpkg-fixes 0-1
extlinux 0-10
init 0-82
install 0-116
kernel 3.16.1.182-190
ldconfig 2.19-0
locales 0-20
network 0-56+3.16.1.182
psplash 2009.05.28-19
ssh 0-13
syslinux 0-7
udev 215-37
webserver 0-217
xfs 0-5
zlib1g 1.2.8-~1
Disks
Filesystem Size Used Available Use% Mounted on
/dev/sdb1 9.3G 160.8M 8.2G 2% /
/dev/sdb2 20.0G 32.2M 19.9G 0% /mnt/data
Modules
Module Size Used by Not tainted
r8169 47546 0
mii 3323 1 r8169
Status
Mem: 58112K used, 1996544K free, 376K shrd, 1284K buff, 24500K cached
CPU: 0% usr 0% sys 0% nic 100% idle 0% io 0% irq 0% sirq
Network
eth0 Link encap:Ethernet HWaddr 00:1D:60:76:86:4B
inet addr:10.132.128.101 Bcast:10.132.128.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3642 errors:0 dropped:0 overruns:0 frame:0
TX packets:3646 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:342086 (334.0 KiB) TX bytes:1021933 (997.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:168 (168.0 B) TX bytes:168 (168.0 B)
Als Anlage habe ich meine backup-config beigefügt.
Viele Grüße skippy
Users Online