Hm,
nach frischer Server-Installation zeigt KODI/VNSI keine HD-Kanäle mehr an.
Logfile:
Feb 21 12:48:51 (MLD) user.debug vdr: [1054] changing pids of channel 220 (NDR FS SH) from 0+0=0:0:0:0 to 2601+2601=2:2602=deu@3,2603=mis@3:0:2604
Feb 21 12:48:54 (MLD) user.info vdr: [1055] loading /etc/vdr/plugins/vnsiserver/allowed_hosts.conf
Feb 21 12:48:54 (MLD) user.info vdr: [1055] VNSI: Client with ID 1 connected: 192.168.178.65:38565
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: Welcome client 'XBMC Media Center' with protocol version '8'
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: LiveStreamer::Close - close
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: close video input ...
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: Successfully found following device: 0x85ce20 (1) for receiving
Feb 21 12:48:54 (MLD) user.debug vdr: [9813] device 1 receiver thread started (pid=723, tid=9813, prio=high)
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: Successfully switched to channel 3 - Das Erste HD
Feb 21 12:48:54 (MLD) user.info vdr: [9812] VNSI: Started streaming of channel Das Erste HD (timeout 10 seconds)
Feb 21 12:48:54 (MLD) user.debug vdr: [9815] cLiveStreamer stream processor thread started (pid=723, tid=9815, prio=high)
Feb 21 12:48:54 (MLD) user.debug vdr: [9816] device 1 TS buffer thread started (pid=723, tid=9816, prio=high)
Feb 21 12:48:54 (MLD) user.info vdr: [9814] VNSI: VideoInput: no pat/pmt within timeout, falling back to channel pids
Feb 21 12:48:54 (MLD) user.info vdr: [9814] VNSI: Video Input - new pmt, attaching receiver
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5101 and type=8
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5106 and type=1
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5102 and type=2
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5103 and type=2
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5105 and type=9
Feb 21 12:48:54 (MLD) user.info vdr: [9815] VNSI: Created stream for pid=5104 and type=11
Feb 21 12:49:04 (MLD) user.info vdr: [9815] VNSI: Channel: unknown error 0
Feb 21 12:49:04 (MLD) user.info vdr: [1053] frontend 0/0 timed out while tuning to channel 3 (Das Erste HD), tp 111493
Feb 21 12:49:14 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:49:24 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:49:34 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:49:44 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:49:54 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:50:04 (MLD) user.info vdr: [9815] VNSI: Channel: no data 16
Feb 21 12:50:05 (MLD) user.info vdr: [1053] frontend 0/0 timed out while tuning to channel 3 (Das Erste HD), tp 111493
No Data...?
Empfang von SD problemlos:
Feb 21 12:53:56 (MLD) user.info vdr: [9812] VNSI: Successfully switched to channel 16 - kabel eins
Feb 21 12:53:56 (MLD) user.info vdr: [9812] VNSI: Started streaming of channel kabel eins (timeout 10 seconds)
Feb 21 12:53:56 (MLD) user.debug vdr: [14363] cLiveStreamer stream processor thread started (pid=723, tid=14363, prio=high)
Feb 21 12:53:56 (MLD) user.debug vdr: [14364] device 1 TS buffer thread started (pid=723, tid=14364, prio=high)
Feb 21 12:53:56 (MLD) user.info vdr: [14362] VNSI: VideoInput: no pat/pmt within timeout, falling back to channel pids
Feb 21 12:53:56 (MLD) user.info vdr: [14362] VNSI: Video Input - new pmt, attaching receiver
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: Created stream for pid=767 and type=7
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: Created stream for pid=768 and type=2
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: Created stream for pid=34 and type=11
Feb 21 12:53:57 (MLD) user.info vdr: [723] VNSI: re-tune to channel kabel eins
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: close video input ...
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: call retune ...
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: call retune ...
Feb 21 12:53:57 (MLD) user.info vdr: [14363] VNSI: Successfully found following device: 0x85ce20 (1) for receiving
Feb 21 12:53:57 (MLD) user.debug vdr: [14364] device 1 TS buffer thread ended (pid=723, tid=14364)
Feb 21 12:53:57 (MLD) user.debug vdr: [14361] buffer stats: 77832 (1%) used
Feb 21 12:53:57 (MLD) user.debug vdr: [14361] device 1 receiver thread ended (pid=723, tid=14361)
Feb 21 12:53:57 (MLD) user.debug vdr: [14366] device 1 receiver thread started (pid=723, tid=14366, prio=high)
Feb 21 12:53:57 (MLD) user.debug vdr: [14368] device 1 TS buffer thread started (pid=723, tid=14368, prio=high)
Feb 21 12:53:57 (MLD) user.info vdr: [14367] VNSI: VideoInput: no pat/pmt within timeout, falling back to channel pids
Feb 21 12:53:57 (MLD) user.info vdr: [14367] VNSI: Video Input - new pmt, attaching receiver
Was hat sich geändert?