Hallo zusammen,
Im Wohnwagen ist mein Vdr an einem 22 Zoll Full Hd Technisat Fernseher angeschlossen. Vorher war der Intel Nuc2820 als System gewählt, mittlerweile aber durch eine Beebox N3150 ersetzt.
Ein Problem ist aber auch hier und nervt bei jedem Boot, nämlich die Meldung undefined Video Mode number 314.
Da muss ich 30s warten oder eine Taste drücken um einen Modus zu wählen. Der Bootsplash kommt beim hochfahren nicht.
Der Vdr an sich läuft dann aber normal.
Release Date: 2014-12-20
[ 16.039] X Protocol Version 11, Revision 0
[ 16.039] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 16.039] Current Operating System: Linux MLD-Server 4.4.5.195.21 #1 SMP Tue May 24 19:10:48 CEST 2016 x86_64
[ 16.039] Kernel command line: root=UUID=6cb7462a-7db9-4971-aad4-eb0ebdcef05a vga=0x314 splash=silent quiet apm=off nodialog hpet=disable initrd=/boot/initrd BOOT_IMAGE=/boot/kernel
[ 16.039] Build Date: 11 February 2015 12:32:02AM
[ 16.039] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 16.039] Current version of pixman: 0.32.6
[ 16.039] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.039] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.039] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 25 09:53:54 2016
[ 16.041] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.041] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.042] (==) ServerLayout "Layout0"
[ 16.042] (**) |-->Screen "Screen0" (0)
[ 16.043] (**) | |-->Monitor "Monitor0"
[ 16.043] (**) | |-->Device "Device0"
[ 16.043] (**) Option "BlankTime" "0"
[ 16.043] (**) Option "StandbyTime" "0"
[ 16.043] (**) Option "SuspendTime" "0"
[ 16.043] (**) Option "OffTime" "0"
[ 16.043] (==) Automatically adding devices
[ 16.043] (==) Automatically enabling devices
[ 16.043] (==) Automatically adding GPU devices
[ 16.043] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 16.043] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.044] Entry deleted from font path.
[ 16.044] (==) FontPath set to:
built-ins
[ 16.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.044] (**) Extension "Composite" is disabled
[ 16.044] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.044] (II) Loader magic: 0x556629848d80
[ 16.044] (II) Module ABI versions:
[ 16.044] X.Org ANSI C Emulation: 0.4
[ 16.044] X.Org Video Driver: 18.0
[ 16.044] X.Org XInput driver : 21.0
[ 16.044] X.Org Server Extension : 8.0
[ 16.044] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.047] (--) PCI:*(0:0:2:0) 8086:22b1:1849:22b1 rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64
[ 16.047] (II) LoadModule: "glx"
[ 16.049] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.065] (II) Module glx: vendor="X.Org Foundation"
[ 16.065] compiled for 1.16.4, module version = 1.0.0
[ 16.065] ABI class: X.Org Server Extension, version 8.0
[ 16.065] (==) AIGLX enabled
[ 16.065] (==) Matched intel as autoconfigured driver 0
[ 16.065] (==) Matched intel as autoconfigured driver 1
[ 16.065] (==) Matched modesetting as autoconfigured driver 2
[ 16.065] (==) Matched fbdev as autoconfigured driver 3
[ 16.065] (==) Matched vesa as autoconfigured driver 4
[ 16.065] (==) Assigned the driver to the xf86ConfigLayout
[ 16.065] (II) LoadModule: "intel"
[ 16.066] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.074] (II) Module intel: vendor="X.Org Foundation"
[ 16.074] compiled for 1.16.4, module version = 2.99.917
[ 16.074] Module class: X.Org Video Driver
[ 16.074] ABI class: X.Org Video Driver, version 18.0
[ 16.074] (II) LoadModule: "modesetting"
[ 16.074] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 16.075] (II) Module modesetting: vendor="X.Org Foundation"
[ 16.075] compiled for 1.15.99.904, module version = 0.9.0
[ 16.075] Module class: X.Org Video Driver
[ 16.075] ABI class: X.Org Video Driver, version 18.0
[ 16.075] (II) LoadModule: "fbdev"
[ 16.075] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 16.076] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.076] compiled for 1.15.99.904, module version = 0.4.4
[ 16.076] Module class: X.Org Video Driver
[ 16.076] ABI class: X.Org Video Driver, version 18.0
[ 16.076] (II) LoadModule: "vesa"
[ 16.076] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 16.077] (II) Module vesa: vendor="X.Org Foundation"
[ 16.077] compiled for 1.15.99.904, module version = 2.3.3
[ 16.077] Module class: X.Org Video Driver
[ 16.077] ABI class: X.Org Video Driver, version 18.0
[ 16.077] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.077] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 16.077] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 16.077] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 16.077] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 16.078] (II) FBDEV: driver for framebuffer: fbdev
[ 16.078] (II) VESA: driver for VESA chipsets: vesa
[ 16.078] (++) using VT number 7
[ 16.093] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 16.094] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[ 16.094] (II) intel(0): SNA compiled for use with valgrind
[ 16.094] (WW) Falling back to old probe method for modesetting
[ 16.094] (WW) Falling back to old probe method for fbdev
[ 16.095] (II) Loading sub module "fbdevhw"
[ 16.095] (II) LoadModule: "fbdevhw"
[ 16.095] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 16.096] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.096] compiled for 1.16.4, module version = 0.0.2
[ 16.096] ABI class: X.Org Video Driver, version 18.0
[ 16.096] (WW) Falling back to old probe method for vesa
[ 16.096] (--) intel(0): gen8 engineering sample
[ 16.096] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 16.096] (II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 16.096] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.096] (==) intel(0): RGB weight 888
[ 16.096] (==) intel(0): Default visual is TrueColor
[ 16.097] (II) intel(0): Output HDMI1 using monitor section Monitor0
[ 16.097] (II) intel(0): Enabled output HDMI1
[ 16.097] (II) intel(0): Output DP1 has no monitor section
[ 16.097] (II) intel(0): Enabled output DP1
[ 16.097] (II) intel(0): Output HDMI2 has no monitor section
[ 16.097] (II) intel(0): Enabled output HDMI2
[ 16.097] (II) intel(0): Output DP2 has no monitor section
[ 16.097] (II) intel(0): Enabled output DP2
[ 16.097] (II) intel(0): Output HDMI3 has no monitor section
[ 16.097] (II) intel(0): Enabled output HDMI3
[ 16.097] (II) intel(0): Output DP3 has no monitor section
[ 16.097] (II) intel(0): Enabled output DP3
[ 16.097] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 16.097] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 16.097] (II) intel(0): Enabled output VIRTUAL1
[ 16.097] (--) intel(0): Output HDMI1 using initial mode 1920x1080i on pipe 0
[ 16.097] (==) intel(0): TearFree disabled
[ 16.097] (==) intel(0): DPI set to (96, 96)
[ 16.097] (II) Loading sub module "dri2"
[ 16.097] (II) LoadModule: "dri2"
[ 16.098] (II) Module "dri2" already built-in
[ 16.098] (II) Loading sub module "present"
[ 16.098] (II) LoadModule: "present"
[ 16.098] (II) Module "present" already built-in
[ 16.098] (II) UnloadModule: "modesetting"
[ 16.098] (II) Unloading modesetting
[ 16.098] (II) UnloadModule: "fbdev"
[ 16.098] (II) Unloading fbdev
[ 16.098] (II) UnloadSubModule: "fbdevhw"
[ 16.098] (II) Unloading fbdevhw
[ 16.098] (II) UnloadModule: "vesa"
[ 16.098] (II) Unloading vesa
[ 16.098] (==) Depth 24 pixmap format is 32 bpp
[ 16.098] (II) intel(0): SNA initialized with Broadwell backend
[ 16.098] (==) intel(0): Backing store disabled
[ 16.098] (==) intel(0): Silken mouse enabled
[ 16.098] (II) intel(0): HW Cursor enabled
[ 16.098] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.099] (==) intel(0): display hotplug detection enabled
[ 16.099] (II) intel(0): [DRI2] Setup complete
[ 16.099] (II) intel(0): [DRI2] DRI driver: i965
[ 16.099] (II) intel(0): [DRI2] VDPAU driver: i965
[ 16.099] (II) intel(0): direct rendering: DRI2 enabled
[ 16.099] (II) intel(0): hardware support for Present enabled
[ 16.099] (WW) intel(0): Option "DPI" is not used
[ 16.099] (--) RandR disabled
[ 16.110] (II) SELinux: Disabled on system
[ 16.155] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.156] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.156] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.156] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.156] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.156] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.156] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 16.156] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 16.156] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.156] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 16.156] (II) AIGLX: Loaded and initialized i965
[ 16.156] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.165] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 16.172] (II) intel(0): Setting screen physical size to 508 x 285
[ 16.259] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.259] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.259] (**) Power Button: Applying InputClass "system-keyboard"
[ 16.259] (II) LoadModule: "evdev"
[ 16.259] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.264] (II) Module evdev: vendor="X.Org Foundation"
[ 16.264] compiled for 1.16.0, module version = 2.9.0
[ 16.264] Module class: X.Org XInput Driver
[ 16.264] ABI class: X.Org XInput driver, version 21.0
[ 16.264] (II) Using input driver 'evdev' for 'Power Button'
[ 16.264] (**) Power Button: always reports core events
[ 16.264] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.264] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.264] (--) evdev: Power Button: Found keys
[ 16.264] (II) evdev: Power Button: Configuring as keyboard
[ 16.264] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 16.264] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.265] (**) Option "xkb_rules" "evdev"
[ 16.265] (**) Option "xkb_model" "pc104"
[ 16.265] (**) Option "xkb_layout" "de"
[ 16.322] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 16.322] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.322] (**) Video Bus: Applying InputClass "system-keyboard"
[ 16.322] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.322] (**) Video Bus: always reports core events
[ 16.322] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 16.322] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.322] (--) evdev: Video Bus: Found keys
[ 16.322] (II) evdev: Video Bus: Configuring as keyboard
[ 16.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event4"
[ 16.323] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.323] (**) Option "xkb_rules" "evdev"
[ 16.323] (**) Option "xkb_model" "pc104"
[ 16.323] (**) Option "xkb_layout" "de"
[ 16.323] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.323] (**) Power Button: Applying InputClass "system-keyboard"
[ 16.324] (II) Using input driver 'evdev' for 'Power Button'
[ 16.324] (**) Power Button: always reports core events
[ 16.324] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.324] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.324] (--) evdev: Power Button: Found keys
[ 16.324] (II) evdev: Power Button: Configuring as keyboard
[ 16.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 16.324] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 16.324] (**) Option "xkb_rules" "evdev"
[ 16.324] (**) Option "xkb_model" "pc104"
[ 16.324] (**) Option "xkb_layout" "de"
[ 16.325] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 16.325] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.325] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 16.325] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.325] (**) Sleep Button: always reports core events
[ 16.325] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 16.325] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.325] (--) evdev: Sleep Button: Found keys
[ 16.325] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.325] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 16.325] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 16.325] (**) Option "xkb_rules" "evdev"
[ 16.325] (**) Option "xkb_model" "pc104"
[ 16.325] (**) Option "xkb_layout" "de"
[ 16.327] (II) config/udev: Adding input device DVBSky S960/S860 (/dev/input/event6)
[ 16.327] (**) DVBSky S960/S860: Applying InputClass "evdev keyboard catchall"
[ 16.327] (**) DVBSky S960/S860: Applying InputClass "system-keyboard"
[ 16.327] (II) Using input driver 'evdev' for 'DVBSky S960/S860'
[ 16.327] (**) DVBSky S960/S860: always reports core events
[ 16.327] (**) evdev: DVBSky S960/S860: Device: "/dev/input/event6"
[ 16.327] (--) evdev: DVBSky S960/S860: Vendor 0x572 Product 0x6831
[ 16.327] (--) evdev: DVBSky S960/S860: Found keys
[ 16.327] (II) evdev: DVBSky S960/S860: Configuring as keyboard
[ 16.327] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1/input9/event6"
[ 16.327] (II) XINPUT: Adding extended input device "DVBSky S960/S860" (type: KEYBOARD, id 10)
[ 16.327] (**) Option "xkb_rules" "evdev"
[ 16.327] (**) Option "xkb_model" "pc104"
[ 16.327] (**) Option "xkb_layout" "de"
[ 16.328] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 16.328] (**) HDA Intel PCH Front Headphone: Applying InputClass "system-keyboard"
[ 16.328] (II) No input driver specified, ignoring this device.
[ 16.328] (II) This device may have been added with another device file.
[ 16.329] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 16.329] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "system-keyboard"
[ 16.329] (II) No input driver specified, ignoring this device.
[ 16.329] (II) This device may have been added with another device file.
[ 16.329] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 16.329] (**) HDA Intel PCH HDMI/DP,pcm=7: Applying InputClass "system-keyboard"
[ 16.329] (II) No input driver specified, ignoring this device.
[ 16.329] (II) This device may have been added with another device file.
[ 16.330] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
[ 16.330] (**) HDA Intel PCH HDMI/DP,pcm=8: Applying InputClass "system-keyboard"
...
Wer hat einen Tip welchen Videomode ich da nehmen muß?
Users Online