So der Treiber funktioniert, nur leider habe ich nun das Problem, dass der angeschlossene Philips MCE Empfänger nicht funktioniert.
Ich denke es liegt daran, dass der Treiber für die TT Karte geladen wird. IRW erkennt keine Tastendrücker zumindest.
Sylvia-Schlafen> lsmod
Module Size Used by Tainted: P
nfsd 197463 11
hwmon_vid 2276 0
snd_hda_codec_hdmi 32494 1
nvidia 10492164 62
i2c_i801 10026 0
coretemp 5276 0
r8169 56828 0
mii 3523 1 r8169
snd_hda_codec_realtek 49333 1
snd_hda_codec_generic 43015 1 snd_hda_codec_realtek
snd_hda_intel 17850 2
uinput 6413 1
snd_hda_codec 63396 4 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 28392 5 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec
snd_hwdep 4857 1 snd_hda_codec
snd_pcm 59984 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_timer 16202 1 snd_pcm
drm 220228 3 nvidia
snd 46370 10 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
saa716x_tt_budget_drv 5599 0
tt_s2_4100 12214 1 saa716x_tt_budget_drv
saa716x_core 32607 27 saa716x_tt_budget_drv
agpgart 21410 1 drm
dvb_core 74468 2 saa716x_tt_budget_drv,saa716x_core
rc_core 12856 2 saa716x_tt_budget_drv
i2c_dev 4458 0
I: Bus=0001 Vendor=13c2 Product=3010 Version=0001
N: Name="saa716x IR (Technotrend TT-budget S2-4100)"
P: Phys=pci-0000:01:00.0/ir0
S: Sysfs=/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/rc/rc0/input6
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=100013
B: KEY=1000000 0 0
B: MSC=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="lircd"
P: Phys=
S: Sysfs=/devices/virtual/input/input20
U: Uniq=
H: Handlers=kbd event16
B: PROP=0
B: EV=100003
B: KEY=1ffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
Mein Empfänger:
Bus 006 Device 002: ID 0471:2093 Philips (or NXP)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips (or NXP)
idProduct 0x2093
bcdDevice 1.01
iManufacturer 1
iProduct 2 Windows Media Center IR Transceiver
iSerial 3 EFBG
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
Wie kann ich den nun zum Leben erwecken?