In beiden Fällen erscheint das segmentation fault beim oder nach dem Modul epg2vdr (1.1.24-GITv213).
mldserver> vdr -L /usr/lib/vdr/ -h
Usage: vdr [OPTIONS]
-a CMD, --audio=CMD send Dolby Digital audio to stdin of command CMD
--cachedir=DIR save cache files in DIR (default: /var/cache/vdr)
--chartab=CHARACTER_TABLE
set the character table to use for strings in the
DVB data stream that don't begin with a character
table indicator, but don't use the standard default
character table (for instance ISO-8859-9)
-c DIR, --config=DIR read config files from DIR (default: /etc/vdr)
-d, --daemon run in daemon mode
-D NUM, --device=NUM use only the given DVB device (NUM = 0, 1, 2...)
there may be several -D options (default: all DVB
devices will be used)
--dirnames=PATH[,NAME[,ENC]]
set the maximum directory path length to PATH
(default: 4095); if NAME is also given, it defines
the maximum directory name length (default: 255);
the optional ENC can be 0 or 1, and controls whether
special characters in directory names are encoded as
hex values (default: 0); if PATH or NAME are left
empty (as in ",,1" to only set ENC), the defaults
apply
--edit=REC cut recording REC and exit
-E FILE, --epgfile=FILE write the EPG data into the given FILE (default is
'epg.data' in the cache directory)
'-E-' disables this
if FILE is a directory, the default EPG file will be
created in that directory
--filesize=SIZE limit video files to SIZE bytes (default is 2000M)
only useful in conjunction with --edit
--genindex=REC generate index for recording REC and exit
-g DIR, --grab=DIR write images from the SVDRP command GRAB into the
given DIR; DIR must be the full path name of an
existing directory, without any "..", double '/'
or symlinks (default: none, same as -g-)
-h, --help print this help and exit
-i ID, --instance=ID use ID as the id of this VDR instance (default: 0)
-l LEVEL, --log=LEVEL set log level (default: 3)
0 = no logging, 1 = errors only,
2 = errors and info, 3 = errors, info and debug
if logging should be done to LOG_LOCALn instead of
LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7)
-L DIR, --lib=DIR search for plugins in DIR (default is /usr/lib/vdr)
--lirc[=PATH] use a LIRC remote control device, attached to PATH
(default: /var/run/lirc/lircd)
--localedir=DIR search for locale files in DIR (default is
/usr/share/locale)
-m, --mute mute audio of the primary DVB device at startup
--no-kbd don't use the keyboard as an input device
-p PORT, --port=PORT use PORT for SVDRP (default: 6419)
0 turns off SVDRP
-P OPT, --plugin=OPT load a plugin defined by the given options
-r CMD, --record=CMD call CMD before and after a recording, and after
a recording has been edited or deleted
--resdir=DIR read resource files from DIR (default: /etc/vdr)
-s CMD, --shutdown=CMD call CMD to shutdown the computer
--split split edited files at the editing marks (only
useful in conjunction with --edit)
--showargs[=DIR] print the arguments read from DIR and exit
(default: /etc/vdr/conf.d)
-t TTY, --terminal=TTY controlling tty
-u USER, --user=USER run as user USER; only applicable if started as
root
--updindex=REC update index for recording REC and exit
--userdump allow coredumps if -u is given (debugging)
-v DIR, --video=DIR use DIR as video directory (default: /data/tv)
-V, --version print version information and exit
--vfat for backwards compatibility (same as
--dirnames=250,40,1)
-w SEC, --watchdog=SEC activate the watchdog timer with a timeout of SEC
seconds (default: 0); '0' disables the watchdog
Plugins: vdr -P"name [OPTIONS]"
streamdev-server (0.6.1-git) - VDR Streaming Server
-a <LOGIN:PASSWORD>, --auth=<LOGIN:PASSWORD> Credentials for HTTP authentication.
-r <CMD>, --remux=<CMD> Define an external command for remuxing.
suspendoutput (2.0.0) - Suspend output
-m --menu Show suspend/resume entry in main menu
(default)
-M --nomenu Don't show entry in main menu
-t MIN --timer=MIN Suspend output after MIN minutes of
inactivity
(default: 120 minutes)
-T --notimer Disable inactivity timer
-p --paused Allow suspend when replay is paused
-l --logo Show VDR logo when suspended
-b --blank Blank screen when suspended
-n --nooutput No output when blank screen
setup (0.3.1-zulu-edition) - System Setup
svdrposd (1.0.0) - Publish OSD menu via SVDRP
satip (2.2.3-GIT-v213) - SAT>IP Devices
-d <num>, --devices=<number> set number of devices to be created
-t <mode>, --trace=<mode> set the tracing mode
-s <ipaddr>|<model>|<desc>, --server=<ipaddr1>|<model1>|<desc1>;<ipaddr2>:<port>|<model2>:<filter>|<desc2>:<quirk>
define hard-coded SAT>IP server(s)
-D, --detach set the detached mode on
-S, --single set the single model server mode on
-n, --noquirks disable autodetection of the server quirks
-p, --portrange=<start>-<end> set a range of ports used for the RT[C]P server
a minimum of 2 ports per device is required.
restfulapi (0.2.6.5) - Offers a RESTful-API to retrieve data from VDR
-i 0.0.0.0, --ip=0.0.0.0 ip of the interface on which the services should listen
-p 8002, --port=8002 tcp port
-e ABC, --epgimages=ABC folder which stores the epg-images
-c DEF, --channellogos=DEF folder which stores the channel-logos
-h false, --headers=true disable additional http headers for accessing the data by javascript even so it's on another port -w GHI, --webapp=GHI folder which stores a webapp
markad (0.1.5pre (7ea3691)) - Mark advertisements
-b DIR, --bindir=DIR use DIR as location for markad executable
(default: /usr/bin)
-l DIR --logocachedir=DIR use DIR as location for markad logos
(default: /var/lib/markad)
svdrpservice (1.0.0) - SVDRP client
IP[:PORT] Default server IP and optional port (e.g. 192.0.2.1:6419).
If no port is given, the default SVDRP port 6419 is asumed.
scraper2vdr (1.0.3-GITv213) - 'scraper2vdr' plugin
-i <IMAGEDIR>, --imagedir=<IMAGEDIR> Set directory where images are stored
-m <MODE>, --mode=<MODE> mode can be client or headless, see README
control (0.0.2a-kw3) - Control VDR over terminal or telnet
-t TTY, --terminal=TTY tty to control vdr per virtual terminal
(default: none)
-p PORT, --port=PORT port to receive remote connections
(default: 2002)
dummydevice (1.0.2) - Output device that does nothing
epg2vdr (1.1.24-GITv213) - epg2vdr plugin
Segmentation fault
mldserver> vdr -L /usr/lib/vdr/ -V
vdr (2.2.0/2.2.0) - The Video Disk Recorder
streamdev-server (0.6.1-git) - VDR Streaming Server
suspendoutput (2.0.0) - Suspend output
setup (0.3.1-zulu-edition) - System Setup
svdrposd (1.0.0) - Publish OSD menu via SVDRP
satip (2.2.3-GIT-v213) - SAT>IP Devices
restfulapi (0.2.6.5) - Offers a RESTful-API to retrieve data from VDR
markad (0.1.5pre (7ea3691)) - Mark advertisements
svdrpservice (1.0.0) - SVDRP client
scraper2vdr (1.0.3-GITv213) - 'scraper2vdr' plugin
control (0.0.2a-kw3) - Control VDR over terminal or telnet
dummydevice (1.0.2) - Output device that does nothing
epg2vdr (1.1.24-GITv213) - epg2vdr plugin
Segmentation fault
mldserver>
Users Online