[TimUx]

So,
ich habe mal ein BIOS Update durchgeführt.

Jetzt werde ich mal 5.3 Stable als Live Stick starten, mal sehen ob die ACPI Probleme behoben sind.

Falls ja, schaue ich mir die Tuner an.
Sollte alles gut sein, werde ich noch einmal ein Upgrade auf 5.3 Stabel versuchen und owncloud aus 5.4 installieren.

Gruß Timo

[TimUx]

OK,
die ACPI Probleme sind nach dem BIOS Update behoben.

Zwei Tuner werden nachwievor nicht erkannt.

Ich habe mal unter verschiedenen Konstellationen Debug Logs gezogen.

5.3 dvb
QYCCLl

5.3 dvb-mb
PVxWX2

5.1 dvb-mbe
PF90ZJ

Gruß Timo

[TimUx]

Dazu noch ein paar weitere Infos, falls Bedarf ist.

MLD 5.3 dvb

Code: [Select]

server> dmesg 
[   10.203257] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
[   10.203358] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[   10.203369] HW 0001000d FW 00010004
[   10.204889] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   10.205179] Port 0 (TAB 1): DUAL DVB-S2
[   10.205894] Port 1 (TAB 2): NO MODULE
[   10.206522] Port 2 (TAB 3): NO MODULE
[   10.207308] Port 3 (TAB 4): NO MODULE
[   10.207430] DVB: registering new adapter (DDBridge)
[   10.359874] LNBx2x attached on addr=a
[   10.360886] stv6110x_attach: Attaching STV6110x
[   10.360888] attach tuner input 0 adr 60
[   10.360891] DDBridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   10.360938] DVB: registering new adapter (DDBridge)
[   10.400952] LNBx2x attached on addr=8
[   10.400955] stv6110x_attach: Attaching STV6110x
[   10.400956] attach tuner input 1 adr 63
[   10.400959] DDBridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   10.401197] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[   10.401208] HW 0001000d FW 00010004
[   10.203358] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[   10.203369] HW 0001000d FW 00010004
[   10.204889] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   10.205179] Port 0 (TAB 1): DUAL DVB-S2
[   10.205894] Port 1 (TAB 2): NO MODULE
[   10.206522] Port 2 (TAB 3): NO MODULE
[   10.207308] Port 3 (TAB 4): NO MODULE
[   10.207430] DVB: registering new adapter (DDBridge)
[   10.359874] LNBx2x attached on addr=a
[   10.360886] stv6110x_attach: Attaching STV6110x
[   10.360888] attach tuner input 0 adr 60
[   10.360891] DDBridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   10.360938] DVB: registering new adapter (DDBridge)
[   10.400952] LNBx2x attached on addr=8
[   10.400955] stv6110x_attach: Attaching STV6110x
[   10.400956] attach tuner input 1 adr 63
[   10.400959] DDBridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   10.401197] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[   10.401208] HW 0001000d FW 00010004
[   10.402441] Port 0 (TAB 1): DUAL DVB-S2
[   10.403104] Port 1 (TAB 2): NO MODULE
[   10.403833] Port 2 (TAB 3): NO MODULE
[   10.404471] Port 3 (TAB 4): NO MODULE
[   10.404592] DVB: registering new adapter (DDBridge)
[   10.559033] LNBx2x attached on addr=a
[   10.559036] stv6110x_attach: Attaching STV6110x
[   10.559037] attach tuner input 0 adr 60
[   10.559040] DDBridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[   10.559195] DVB: registering new adapter (DDBridge)
[   10.600030] LNBx2x attached on addr=8
[   10.600033] stv6110x_attach: Attaching STV6110x
[   10.600034] attach tuner input 1 adr 63
[   10.600036] DDBridge 0000:04:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...


server> ls /dev/dvb/adapter*     
/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0


server> lsmod
Module                  Size  Used by    Tainted: G 
stv6110x                3928  4
lnbp21                  1800  4
stv090x                41679  4
i2c_i801               11632  0
i2c_smbus               2977  1 i2c_i801
ddbridge               16497 16
cxd2099                 5015  1 ddbridge
dvb_core               81722  1 ddbridge
nfsd                  199180 11
i2c_dev                 4586  0
r8169                  56990  0
mii                     3587  1 r8169
server>


server> dpkg -l|grep dvb
ii  dvb                         2:0-7+4.8.15.198.3        amd64        DVB Treiber aus Linuxkernel
ii  dvb-apps                    1.1.1-~3                  amd64        Digital Video Broadcasting (DVB) applications


MLD 5.3 dvb-mb

Code: [Select]

[   10.194210] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.407670] media: loading out-of-tree module taints kernel.
[   10.407826] media: Linux media interface: v0.10
[   10.408169] WARNING: You are using an experimental version of the media stack.
[   10.408169]  As the driver is backported to an older kernel, it doesn't offer
[   10.408169]  enough quality for its usage in production.
[   10.408169]  Use it with care.
[   10.408169] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   10.408169] 
[   10.408507] DDBridge: Digital Devices PCIE bridge driver 0.9.28, Copyright (C) 2010-16 Digital Devices GmbH
[   10.408746] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   10.408759] DDBridge: HW 0001000d REGMAP 00010004
[   10.408798] DDBridge: using 1 MSI interrupt(s)
[   10.408823] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   10.409106] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   10.410132] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   10.411428] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   10.412652] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   10.413849] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   10.413967] DDBridge: 0 netstream channels
[   10.413968] dvbdev: DVB: registering new adapter (DDBridge)
[   10.413968] dvbdev: DVB: registering new adapter (DDBridge)
[   10.575189] Attaching STV0900 demodulator(1) Cut=0x30
[   10.576568] LNBx2x attached on addr=a
[   10.577625] stv6110x_attach: Attaching STV6110x
[   10.577627] DDBridge: attach tuner input 0 adr 60
[   10.577630] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   10.619189] Attaching STV0900 demodulator(2) Cut=0x30
[   10.619493] LNBx2x attached on addr=8
[   10.619496] stv6110x_attach: Attaching STV6110x
[   10.619497] DDBridge: attach tuner input 1 adr 63
[   10.619500] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   10.619829] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   10.619841] DDBridge: HW 0001000d REGMAP 00010004
[   10.619879] DDBridge: using 1 MSI interrupt(s)
[   10.619904] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   10.621416] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   10.622527] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   10.623719] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   10.624870] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   10.624978] DDBridge: 0 netstream channels
[   10.624980] dvbdev: DVB: registering new adapter (DDBridge)
[   10.624980] dvbdev: DVB: registering new adapter (DDBridge)
[   10.784159] Attaching STV0900 demodulator(1) Cut=0x30
[   10.784458] LNBx2x attached on addr=a
[   10.784461] stv6110x_attach: Attaching STV6110x
[   10.784462] DDBridge: attach tuner input 0 adr 60
[   10.784465] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[   10.825230] Attaching STV0900 demodulator(2) Cut=0x30
[   10.825516] LNBx2x attached on addr=8
[   10.825519] stv6110x_attach: Attaching STV6110x
[   10.825520] DDBridge: attach tuner input 1 adr 63
[   10.825522] ddbridge 0000:04:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...


/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0

server> lsmod
Module                  Size  Used by    Tainted: G 
stv6110x                3864  4
lnbp21                  1800  4
stv090x                43050  4
i2c_i801               11632  0
i2c_smbus               2977  1 i2c_i801
ddbridge               76134 18
cxd2099                 5761  1 ddbridge
dvb_core               78037  1 ddbridge
media                  15988  1 dvb_core
nfsd                  199180 11
i2c_dev                 4586  0
r8169                  56990  0
mii                     3587  1 r8169

server> lspci -mk
00:1f.3 "Class 0403" "8086" "a170" "1043" "86bd"
00:00.0 "Class 0600" "8086" "191f" "1043" "8694" "skl_uncore"
00:1d.0 "Class 0604" "8086" "a118" "1043" "8694" "pcieport"
00:02.0 "Class 0300" "8086" "1912" "1043" "8694"
04:00.0 "Class 0480" "dd01" "0003" "dd01" "0021" "ddbridge"
00:14.0 "Class 0c03" "8086" "a12f" "1043" "8694" "xhci_hcd"
00:1f.4 "Class 0c05" "8086" "a123" "1043" "8694" "i801_smbus"
00:17.0 "Class 0106" "8086" "a102" "1043" "8694" "ahci"
00:1f.2 "Class 0580" "8086" "a121" "1043" "8694"
03:00.0 "Class 0480" "dd01" "0003" "dd01" "0021" "ddbridge"
00:1c.0 "Class 0604" "8086" "a114" "1043" "8694" "pcieport"
00:1f.0 "Class 0601" "8086" "a148" "1043" "8694"
02:00.0 "Class 0400" "18c3" "0720" "18c3" "ab04"
00:1c.7 "Class 0604" "8086" "a117" "1043" "8694" "pcieport"
00:1c.5 "Class 0604" "8086" "a115" "1043" "8694" "pcieport"
00:16.0 "Class 0780" "8086" "a13a" "1043" "8694"
01:00.0 "Class 0200" "10ec" "8168" "1043" "8677" "r8169"

server> dpkg -l|grep dvb
ii  dvb-apps                    1.1.1-~3                     amd64        Digital Video Broadcasting (DVB) applications
ii  dvb-mb                      1:2017.03.07-27+4.8.15.198.3 amd64        tt, tbs, dddvb, linuxTV and FF S2-6400 DVB Treiber (one package for the most of devices)


[TimUx]

Und noch MLD 5.1, wo alles sauber läuft.


MLD 5.1 dvb.mbe

Code: [Select]

[    2.801777] WARNING: You are using an experimental version of the media stack.
[    2.801777]  As the driver is backported to an older kernel, it doesn't offer
[    2.801777]  enough quality for its usage in production.
[    2.801777]  Use it with care.
[    2.801777] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    2.801777]  1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[    2.801777]  ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[    2.801777]  5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[    2.801777]  experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[    2.801777]  v4l-dvb-saa716x: 3b9fce66666a32ddf2b94ac7e72e540773f3e353 saa716x_ff: Avoid sleeping in fifo_worker
[    2.803361] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000046000, f8:32:e4:8c:33:9c, XID 14100800 IRQ 122
[    2.803364] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.806827] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[    2.806918] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner
[    2.807162] ngene: Device version 1
[    2.807750] Digital Devices PCIE bridge driver 0.9.18, Copyright (C) 2010-15 Digital Devices GmbH
[    2.808636] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    2.808647] DDBridge: HW 0001000d REGMAP 00010004
[    2.808707] DDBridge: using 1 MSI interrupt(s)
[    2.810138] random: nonblocking pool is initialized
[    2.810988] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[    2.812111] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[    2.813271] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[    2.814283] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[    2.814393] 0 netstream channels
[    2.814394] DVB: registering new adapter (DDBridge)
[    2.814396] DVB: registering new adapter (DDBridge)
[    2.815417] ngene: Loading firmware file ngene_18.fw.
[    2.838319] error in i2c_read_reg
[    2.838321] No CXD2099 detected at 40
[    2.858753] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[    2.864152] UDF-fs: warning (device sdb1): udf_fill_super: No partition found (2)
[    2.984297] Attaching STV0900 demodulator(1) Cut=0x30
[    2.986458] LNBx2x attached on addr=a
[    2.988200] stv6110x_attach: Attaching STV6110x
[    2.988202] attach tuner input 0 adr 60
[    2.988244] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[    3.026291] Attaching STV0900 demodulator(2) Cut=0x30
[    3.026608] LNBx2x attached on addr=8
[    3.026612] stv6110x_attach: Attaching STV6110x
[    3.026613] attach tuner input 1 adr 63
[    3.026763] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[    3.027094] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    3.027105] DDBridge: HW 0001000d REGMAP 00010004
[    3.027159] DDBridge: using 1 MSI interrupt(s)
[    3.028918] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[    3.030419] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[    3.031779] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[    3.032891] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[    3.032992] 0 netstream channels
[    3.032994] DVB: registering new adapter (DDBridge)
[    3.032995] DVB: registering new adapter (DDBridge)
[    3.150303] Attaching STV0900 demodulator(1) Cut=0x20
[    3.151086] LNBx2x attached on addr=b
[    3.151091] stv6110x_attach: Attaching STV6110x
[    3.151105] DVB: registering new adapter (nGene)
[    3.151203] ngene 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV090x Multistandard)...
[    3.198293] Attaching STV0900 demodulator(2) Cut=0x20
[    3.198632] Attaching STV0900 demodulator(1) Cut=0x30
[    3.198632] LNBx2x attached on addr=a
[    3.198637] stv6110x_attach: Attaching STV6110x
[    3.198651] attach tuner input 0 adr 60
[    3.198789] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[    3.199045] LNBx2x attached on addr=8
[    3.199062] stv6110x_attach: Attaching STV6110x
[    3.199063] DVB: registering new adapter (nGene)
[    3.199098] ngene 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV090x Multistandard)...
[    3.237288] Attaching STV0900 demodulator(2) Cut=0x30
[    3.237613] LNBx2x attached on addr=8
[    3.237617] stv6110x_attach: Attaching STV6110x
[    2.807750] Digital Devices PCIE bridge driver 0.9.18, Copyright (C) 2010-15 Digital Devices GmbH
[    2.808636] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    2.808647] DDBridge: HW 0001000d REGMAP 00010004
[    2.808707] DDBridge: using 1 MSI interrupt(s)
[    2.810138] random: nonblocking pool is initialized
[    2.810988] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[    2.812111] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[    2.813271] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[    2.814283] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[    2.814393] 0 netstream channels
[    2.814394] DVB: registering new adapter (DDBridge)
[    2.814396] DVB: registering new adapter (DDBridge)
[    2.815417] ngene: Loading firmware file ngene_18.fw.
[    2.838319] error in i2c_read_reg
[    2.838321] No CXD2099 detected at 40
[    2.858753] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[    2.864152] UDF-fs: warning (device sdb1): udf_fill_super: No partition found (2)
[    2.984297] Attaching STV0900 demodulator(1) Cut=0x30
[    2.986458] LNBx2x attached on addr=a
[    2.988200] stv6110x_attach: Attaching STV6110x
[    2.988202] attach tuner input 0 adr 60
[    2.988244] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[    3.026291] Attaching STV0900 demodulator(2) Cut=0x30
[    3.026608] LNBx2x attached on addr=8
[    3.026612] stv6110x_attach: Attaching STV6110x
[    3.026613] attach tuner input 1 adr 63
[    3.026763] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[    3.027094] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    3.027105] DDBridge: HW 0001000d REGMAP 00010004
[    3.027159] DDBridge: using 1 MSI interrupt(s)
[    3.028918] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[    3.030419] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[    3.031779] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[    3.032891] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[    3.032992] 0 netstream channels
[    3.032994] DVB: registering new adapter (DDBridge)
[    3.032995] DVB: registering new adapter (DDBridge)
[    3.150303] Attaching STV0900 demodulator(1) Cut=0x20
[    3.151086] LNBx2x attached on addr=b
[    3.151091] stv6110x_attach: Attaching STV6110x
[    3.151105] DVB: registering new adapter (nGene)
[    3.151203] ngene 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV090x Multistandard)...
[    3.198293] Attaching STV0900 demodulator(2) Cut=0x20
[    3.198632] Attaching STV0900 demodulator(1) Cut=0x30
[    3.198632] LNBx2x attached on addr=a
[    3.198637] stv6110x_attach: Attaching STV6110x
[    3.198651] attach tuner input 0 adr 60
[    3.198789] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[    3.199045] LNBx2x attached on addr=8
[    3.199062] stv6110x_attach: Attaching STV6110x
[    3.199063] DVB: registering new adapter (nGene)
[    3.199098] ngene 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV090x Multistandard)...
[    3.237288] Attaching STV0900 demodulator(2) Cut=0x30
[    3.237613] LNBx2x attached on addr=8
[    3.237617] stv6110x_attach: Attaching STV6110x


server> lspci
00:00.0 Host bridge: Intel Corporation Device 191f (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Device 1912 (rev 06)
00:14.0 USB controller: Intel Corporation Device a12f (rev 31)
00:16.0 Communication controller: Intel Corporation Device a13a (rev 31)
00:17.0 SATA controller: Intel Corporation Device a102 (rev 31)
00:1c.0 PCI bridge: Intel Corporation Device a114 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Device a115 (rev f1)
00:1c.7 PCI bridge: Intel Corporation Device a117 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Device a118 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device a148 (rev 31)
00:1f.2 Memory controller: Intel Corporation Device a121 (rev 31)
00:1f.3 Audio device: Intel Corporation Device a170 (rev 31)
00:1f.4 SMBus: Intel Corporation Device a123 (rev 31)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Multimedia video controller: Micronas Semiconductor Holding AG nGene PCI-Express Multimedia Controller (rev 04)
03:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
04:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter


server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter4:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter5:
demux0     dvr0       frontend0  net0

server> lsmod
Module                  Size  Used by    Tainted: G 
nfsd                  197463 11
raid1                  23590  1
stv6110x                3992  6
lnbp21                  1800  6
stv090x                41981  6
ddbridge               62962 29
ngene                  25381  0
cxd2099                 5761  2 ddbridge,ngene
dvb_core               75200  2 ddbridge,ngene
r8169                  56828  0
i2c_i801               10026  0
mii                     3523  1 r8169
acpi_cpufreq            6050  0
i2c_dev                 4458  0


[P3f]

Hallo Timo,

ok, anhand der Logfiles kann man schon erkennen, das die "ngene" Kernelmodule nicht geladen sind. Die Karte wird aber erkannt (sieht man im lspci.out)

Jetzt würde mich interessieren, ob man das module mit "modprobe ngene" nachladen kann! Dann haben wir nur ggf. ein Timing Problem mit dem Board ASUS Trooper B150 D3 und einem neueren Linux kernel.

Es kann natürlich auch an einer BIOS Einstellung sein. Vielleicht hast Du ja auch die Chance die beiden PCI Karten mal gegeneinander zutauschen und im BIOS zu schauen. (Meine Vermutung ist das Powermanagment beim ASUS-Board).

Und interessant wäre dann ein Test mit der MLD 5.4, was Du ja sowieso machen wolltest wegen dem owncloud.

Gruß,

Pit

P.S: Es reicht wenn Du das DVB-MB anwendest, das beinhaltet auf jeden Fall die ngene-Treiber.

[clausmuus]

Du könntest auch mal testen, ob's was ändert, wenn nur die ngene Karte im System ist, ob die dann also funktioniert.

Claus

[TimUx]

Hi,
wenn ich wieder mal alleine zu Hause bin, werde ich noch ein paar Tests durchführen.

Das könnte aber wieder ein paar Tage dauern. 

Gruß Timo

[Christian]

HI,

ich habe für die 5.4 das "ältere" dvb-mbe zur Verfügung gestellt.

Gerne einmal testen

Grüße

[TimUx]

Hallo zusammen,
ich habe wieder getestet.

5.4 Testing mit dvb-mb Packet, gleiche Ergebnis wie bei 5.3.

Logs: BHAgSR

Code: [Select]

[   45.531017] WARNING: You are using an experimental version of the media stack.
[   45.531017]  As the driver is backported to an older kernel, it doesn't offer
[   45.531017]  enough quality for its usage in production.
[   45.531017]  Use it with care.
[   45.531017] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   45.531017] 
[   45.531370] DDBridge: Digital Devices PCIE bridge driver 0.9.29, Copyright (C) 2010-17 Digital Devices GmbH
[   45.531717] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   45.531728] DDBridge: HW 0001000d REGMAP 00010004
[   45.531769] DDBridge: using 1 MSI interrupt(s)
[   45.531784] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   45.532507] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   45.532535] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   45.536138] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   45.537182] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   45.538274] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   45.539928] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   45.540026] DDBridge: 0 netstream channels
[   45.540027] dvbdev: DVB: registering new adapter (DDBridge)
[   45.540028] dvbdev: DVB: registering new adapter (DDBridge)
[   45.702916] Attaching STV0900 demodulator(1) Cut=0x30
[   45.704459] LNBx2x attached on addr=a
[   45.706940] stv6110x_attach: Attaching STV6110x
[   45.706941] DDBridge: attach tuner input 0 adr 60
[   45.706944] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   45.747004] Attaching STV0900 demodulator(2) Cut=0x30
[   45.747307] LNBx2x attached on addr=8
[   45.747310] stv6110x_attach: Attaching STV6110x
[   45.747311] DDBridge: attach tuner input 1 adr 63
[   45.747314] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   45.747586] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   45.747597] DDBridge: HW 0001000d REGMAP 00010004
[   45.531017] WARNING: You are using an experimental version of the media stack.
[   45.531017]  As the driver is backported to an older kernel, it doesn't offer
[   45.531017]  enough quality for its usage in production.
[   45.531017]  Use it with care.
[   45.531017] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   45.531017] 
[   45.531370] DDBridge: Digital Devices PCIE bridge driver 0.9.29, Copyright (C) 2010-17 Digital Devices GmbH
[   45.531717] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   45.531728] DDBridge: HW 0001000d REGMAP 00010004
[   45.531769] DDBridge: using 1 MSI interrupt(s)
[   45.531784] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   45.532507] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   45.532535] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   45.536138] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   45.537182] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   45.538274] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   45.539928] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   45.540026] DDBridge: 0 netstream channels
[   45.540027] dvbdev: DVB: registering new adapter (DDBridge)
[   45.540028] dvbdev: DVB: registering new adapter (DDBridge)
[   45.702916] Attaching STV0900 demodulator(1) Cut=0x30
[   45.704459] LNBx2x attached on addr=a
[   45.706940] stv6110x_attach: Attaching STV6110x
[   45.706941] DDBridge: attach tuner input 0 adr 60
[   45.706944] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   45.747004] Attaching STV0900 demodulator(2) Cut=0x30
[   45.747307] LNBx2x attached on addr=8
[   45.747310] stv6110x_attach: Attaching STV6110x
[   45.747311] DDBridge: attach tuner input 1 adr 63
[   45.747314] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   45.747586] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   45.747597] DDBridge: HW 0001000d REGMAP 00010004


server> lspci
00:1f.3 Class 0403: 8086:a170
00:00.0 Class 0600: 8086:191f
00:1d.0 Class 0604: 8086:a118
00:02.0 Class 0300: 8086:1912
04:00.0 Class 0480: dd01:0003
00:14.0 Class 0c03: 8086:a12f
00:1f.4 Class 0c05: 8086:a123
00:17.0 Class 0106: 8086:a102
00:1f.2 Class 0580: 8086:a121
03:00.0 Class 0480: dd01:0003
00:1c.0 Class 0604: 8086:a114
00:1f.0 Class 0601: 8086:a148
02:00.0 Class 0400: 18c3:0720
00:1c.7 Class 0604: 8086:a117
00:1c.5 Class 0604: 8086:a115
00:16.0 Class 0780: 8086:a13a
01:00.0 Class 0200: 10ec:8168

server> lsmod
Module                  Size  Used by    Tainted: G 
stv6110x                3864  4
lnbp21                  1800  4
stv090x                43050  4
i2c_i801               11568  0
ddbridge               79238  0
cxd2099                 5761  1 ddbridge
dvb_core               77589  1 ddbridge
media                  15796  1 dvb_core
nfsd                  202679 11
i2c_dev                 4586  0
r8169                  57161  0
mii                     4785  1 r8169



[  532.192729] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0

Ich konnte zwar mit "modprobe ngene" das Modul nachladen, allerdings hat dies an der Adapter Situation nichts geändert.

Code: [Select]

[  532.192729] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas


server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0
server> lsmod
Module                  Size  Used by    Tainted: G 
ngene                  24495  0
stv6110x                3864  4
lnbp21                  1800  4
stv090x                43050  4
i2c_i801               11568  0
ddbridge               79238  0
cxd2099                 5761  2 ngene,ddbridge
dvb_core               77589  2 ngene,ddbridge
media                  15796  1 dvb_core
nfsd                  202679 11
i2c_dev                 4586  0
r8169                  57161  0
mii                     4785  1 r8169

5.4 Testing mit dvb-mbe Packet,alles gut!
Hier bekomme ich wieder alle 6 Adapter.

Logs: v1dYmM

Code: [Select]

server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter1:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter2:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter3:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter4:
demux0     dvr0       frontend0  net0

/dev/dvb/adapter5:
demux0     dvr0       frontend0  net0

[   44.860160] media: Linux media interface: v0.10
[   44.860530] WARNING: You are using an experimental version of the media stack.
[   44.860530]  As the driver is backported to an older kernel, it doesn't offer
[   44.860530]  enough quality for its usage in production.
[   44.860530]  Use it with care.
[   44.860530] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   44.860530]  e7b3a2b22176d01db0c3b31d6389ccf542ba1967 [media] st-hva: hva_dbg_summary() should be static
[   44.860530]  c610b5a8e22a5a312a9f431716cdd630be4e0e6f [media] st-hva: add debug file system
[   44.860530]  f7e1a6dba9ddac1da6fec2eb4dbf95b5b0cb3ce5 [media] st-hva: encoding summary at instance release
[   44.860530]  experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[   44.860530]  v4l-dvb-saa716x: 3b9fce66666a32ddf2b94ac7e72e540773f3e353 saa716x_ff: Avoid sleeping in fifo_worker
[   44.860802] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[   44.860912] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner
[   44.861175] ngene: Device version 1
[   44.861234] ngene: Loading firmware file ngene_18.fw.
[   44.864021] DDBridge: Digital Devices PCIE bridge driver 0.9.29, Copyright (C) 2010-17 Digital Devices GmbH
[   44.864629] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   44.864889] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   44.865568] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   44.865689] DDBridge: HW 0001000d REGMAP 00010004
[   44.866326] DDBridge: using 1 MSI interrupt(s)
[   44.866526] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   44.871553] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   44.873775] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   44.876195] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   44.877613] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   44.877711] DDBridge: 0 netstream channels
[   44.877712] dvbdev: DVB: registering new adapter (DDBridge)
[   44.877713] dvbdev: DVB: registering new adapter (DDBridge)
[   44.885010] error in i2c_read_reg
[   44.885011] No CXD2099 detected at 40
[   45.036139] Attaching STV0900 demodulator(1) Cut=0x30
[   45.038321] LNBx2x attached on addr=a
[   45.039342] stv6110x_attach: Attaching STV6110x
[   45.039344] DDBridge: attach tuner input 0 adr 60
[   45.039386] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   45.080142] Attaching STV0900 demodulator(2) Cut=0x30
[   45.080463] LNBx2x attached on addr=8
[   45.080466] stv6110x_attach: Attaching STV6110x
[   45.080466] DDBridge: attach tuner input 1 adr 63
[   45.080606] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   45.080901] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[   45.080913] DDBridge: HW 0001000d REGMAP 00010004
[   45.080954] DDBridge: using 1 MSI interrupt(s)
[   45.080968] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[   45.082720] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[   45.084200] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   45.085611] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   45.086958] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   45.087062] DDBridge: 0 netstream channels
[   45.087063] dvbdev: DVB: registering new adapter (DDBridge)
[   45.087063] dvbdev: DVB: registering new adapter (DDBridge)
[   45.178166] Attaching STV0900 demodulator(1) Cut=0x20
[   45.178881] LNBx2x attached on addr=b
[   45.178883] stv6110x_attach: Attaching STV6110x
[   45.178885] dvbdev: DVB: registering new adapter (nGene)
[   45.179038] ngene 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV090x Multistandard)...
[   45.215135] Attaching STV0900 demodulator(2) Cut=0x20
[   45.215884] LNBx2x attached on addr=8
[   45.215887] stv6110x_attach: Attaching STV6110x
[   45.215888] dvbdev: DVB: registering new adapter (nGene)
[   45.216024] ngene 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV090x Multistandard)...
[   45.250206] Attaching STV0900 demodulator(1) Cut=0x30
[   45.250523] LNBx2x attached on addr=a
[   45.250525] stv6110x_attach: Attaching STV6110x
[   45.250526] DDBridge: attach tuner input 0 adr 60
[   45.250654] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[   45.291138] Attaching STV0900 demodulator(2) Cut=0x30
[   45.291445] LNBx2x attached on addr=8
[   45.291447] stv6110x_attach: Attaching STV6110x
[   45.291448] DDBridge: attach tuner input 1 adr 63
[   45.291579] ddbridge 0000:04:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...

server> lspci
00:1f.3 Class 0403: 8086:a170
00:00.0 Class 0600: 8086:191f
00:1d.0 Class 0604: 8086:a118
00:02.0 Class 0300: 8086:1912
04:00.0 Class 0480: dd01:0003
00:14.0 Class 0c03: 8086:a12f
00:1f.4 Class 0c05: 8086:a123
00:17.0 Class 0106: 8086:a102
00:1f.2 Class 0580: 8086:a121
03:00.0 Class 0480: dd01:0003
00:1c.0 Class 0604: 8086:a114
00:1f.0 Class 0601: 8086:a148
02:00.0 Class 0400: 18c3:0720
00:1c.7 Class 0604: 8086:a117
00:1c.5 Class 0604: 8086:a115
00:16.0 Class 0780: 8086:a13a
01:00.0 Class 0200: 10ec:8168

server> lsmod
Module                  Size  Used by    Tainted: G 
stv6110x                3864  6
lnbp21                  1800  6
stv090x                42218  6
i2c_i801               11568  0
ddbridge               79110  4
ngene                  24961  2
cxd2099                 5761  2 ddbridge,ngene
dvb_core               77034  2 ddbridge,ngene
media                  15796  1 dvb_core
nfsd                  202679 11
i2c_dev                 4586  0
r8169                  57161  0
mii                     4785  1 r8169


Übrigens ist mir beim Testen aufgefallen, dass sich aktuell minisatip nicht installieren läßt, da es eine Abhängigkeit zum Paket "dvb-apps" gibt, dieses aktuell aber nicht zur Verfügung steht.

Gruß Timo

[clausmuus]

das dvb-apps wurde versehendlich gelöscht. Ist jetzt aber wieder online

Claus

[Saccara]

Hi,

ich wollte mal fragen, wie hast du das Problem gelöst bekommen? Ich habe von 5.1 auch eine neue Installation auf 5.4 gemacht und habe auch die L4M Twin und als Erweiterung die l4M Flex Karte und bekomme irgendwie auch kein Bild.

[Saccara]

Hat sich erledigt. Kabel waren nicht korrekt angeschlossen. Voll peinlich