[1] MLD-5.x / Systems / Banana PI / BananaPro Testing Image satip-shd läuft nicht
 

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« on: October 25, 2018, 22:14:40 »
Hallo,

ich habe ganz frisch einen BananaPro mit dem Testing Image satip-shd aufgesetzt.
Da sind einige Pakete nicht richtig installiert. (siehe Unten)

Hat das noch jemand?

Gruß
Arthur



MLD> apt update
Get:1 http://www.minidvblinux.de/download/5.4/files testing InRelease [2.187 B]
Fetched 2.187 B in 0s (2.215 B/s)
Reading package lists... Done
Building dependency tree... Done
9 packages can be upgraded. Run 'apt list --upgradable' to see them.
MLD> apt list --upgradable
Listing... Done
apt/testing 1.4.8-71.1 armhf [upgradable from: 1.4.8-70.12]
base/testing 0-103 armhf [upgradable from: 0-102.5]
busybox/testing 1:1.25.1-54 armhf [upgradable from: 1:1.25.1-53.4]
dpkg/testing 1.18.24-18 armhf [upgradable from: 1.18.24-18]
init/testing 0-106 armhf [upgradable from: 0-105.4]
libgcrypt20/testing 1.7.6-~1 armhf [upgradable from: 1.7.6-~1]
psplash/testing 2009.05.28-22.1 armhf [upgradable from: 2009.05.28-22]
udev/testing 232-48.1 armhf [upgradable from: 232-47.1]
vdr-plugin-satip/testing 1:2018.10.21-23+2.4.0.216.2 armhf [upgradable from: 1:2018.04.15-23+2.4.0.216.2]
MLD> apt upgrade
Reading package lists... Done
Building dependency tree... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
 vdr : Depends: at but it is not installable
 vdr-plugin-softhddevice:armhf-bpi : Depends: vdr:armhf-bpi (< 2.4.0.214.72-.)
                                     Depends: libva-glx1:armhf-bpi (>= 1.7.3-~1) but it is not installable
                                     Depends: libglu1-mesa:armhf-bpi (>= 9.0.0-~1) but it is not installable
                                     Depends: libxcb-screensaver0:armhf-bpi (>= 1.12-~1) but it is not installable
                                     Depends: libxcb-dpms0:armhf-bpi (>= 1.12-~1) but it is not installable
                                     Depends: libxcb-icccm4:armhf-bpi (>= 0.4.1-~1) but it is not installable
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).

Logged

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20531
    • View Profile
    • ClausMuus.de
BananaPro Testing Image satip-shd läuft nicht
« Reply #1 on: October 27, 2018, 10:02:04 »
Rufe mal wie in der Fehlermeldung vorgeschlagen den Befehl "apt --fix-broken install" auf. Eventuell geht's dann schon wieder.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline baltic

  • MLD-Debugger
  • Expert Member
  • *****
  • Posts: 724
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #2 on: October 27, 2018, 11:29:57 »
Ansonsten: Was passiert, wenn Du "apt install at" machst?
Daran scheint es ja zu scheitern.
Logged
MLD 5.5 – unstable  Asus M3N78-EM  SkyStar2

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #3 on: October 27, 2018, 21:06:42 »
Hallo Claus,

wen ich apt --fix-roken install aufrufe, entfernt er mir die VDR Pakete.
Die lassen sich dann auch nicht mehr installieren

MLD> apt --fix-broken install
Reading package lists... Done
Building dependency tree... Done
Correcting dependencies... Done
The following packages will be REMOVED:
  vdr vdr-plugin-menuorg vdr-plugin-satip vdr-plugin-softhddevice:armhf-bpi
0 upgraded, 0 newly installed, 4 to remove and 8 not upgraded.
4 not fully installed or removed.
After this operation, 5.546 kB disk space will be freed.
Do you want to continue? [Y/n]
Logged

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #4 on: October 27, 2018, 21:08:04 »
es kommt immer diese Meldung
auch bei den anderen Pakenet (vdr vdr-plugin-menuorg vdr-plugin-satip vdr-plugin-softhddevice:armhf-bpi)

MLD> apt install at
Reading package lists... Done
Building dependency tree... Done
Package at is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'at' has no installation candidate
Logged

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20531
    • View Profile
    • ClausMuus.de
BananaPro Testing Image satip-shd läuft nicht
« Reply #5 on: October 28, 2018, 10:44:42 »
Das sollte jetzt wieder funktionieren. Das at Paket ist jetzt wieder verfügbar.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #6 on: October 29, 2018, 20:50:36 »
Hallo Claus

habe heute nochmal mit aktuellem satip-shd Image aufgesetzt.

Das 'vdr-plugin-softhddevice' hat immer noch ein Problem bzw. läst sich es nach 'apt --fix-broken install'
nicht mehr installieren.

MLD> apt upgrade
Reading package lists... Done
Building dependency tree... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
 vdr-plugin-softhddevice:armhf-bpi : Depends: vdr:armhf-bpi (< 2.4.0.214.72-.)
                                     Depends: libva-glx1:armhf-bpi (>= 1.7.3-~1) but it is not installable
                                     Depends: libglu1-mesa:armhf-bpi (>= 9.0.0-~1) but it is not installable
                                     Depends: libxcb-screensaver0:armhf-bpi (>= 1.12-~1) but it is not installable
                                     Depends: libxcb-dpms0:armhf-bpi (>= 1.12-~1) but it is not installable
                                     Depends: libxcb-icccm4:armhf-bpi (>= 0.4.1-~1) but it is not installable
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
MLD>
MLD> apt --fix-broken install
Reading package lists... Done
Building dependency tree... Done
Correcting dependencies... Done
The following packages will be REMOVED:
  vdr-plugin-softhddevice:armhf-bpi
0 upgraded, 0 newly installed, 1 to remove and 8 not upgraded.
1 not fully installed or removed.
After this operation, 430 kB disk space will be freed.
Do you want to continue? [Y/n] y
(Reading database ... 3342 files and directories currently installed.)
Removing vdr-plugin-softhddevice:armhf-bpi (2018.03.07-74.23+2.4.0.214.72) ...
MLD> apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  apt base busybox dpkg init libgcrypt20 psplash udev
8 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 2.785 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://www.minidvblinux.de/download/5.4/files testing/main armhf busybox armhf 1:1.25.1-54 [321 kB]
Get:2 http://www.minidvblinux.de/download/5.4/files testing/main armhf dpkg armhf 1.18.24-18 [257 kB]
Get:3 http://www.minidvblinux.de/download/5.4/files testing/main armhf libgcrypt20 armhf 1.7.6-~1 [407 kB]
Get:4 http://www.minidvblinux.de/download/5.4/files testing/main armhf apt armhf 1.4.8-71.1 [925 kB]
Get:5 http://www.minidvblinux.de/download/5.4/files testing/main armhf base armhf 0-103 [357 kB]
Get:6 http://www.minidvblinux.de/download/5.4/files testing/main armhf init armhf 0-106 [9.622 B]
Get:7 http://www.minidvblinux.de/download/5.4/files testing/main armhf udev armhf 232-48.1 [467 kB]
Get:8 http://www.minidvblinux.de/download/5.4/files testing/main armhf psplash armhf 2009.05.28-22.1 [40,5 kB]
Fetched 2.785 kB in 2s (1.179 kB/s)
(Reading database ... 3326 files and directories currently installed.)
Preparing to unpack .../busybox_1%3a1.25.1-54_armhf.deb ...
Unpacking busybox (1:1.25.1-54) over (1:1.25.1-53.4) ...
Setting up busybox (1:1.25.1-54) ...
(Reading database ... 3326 files and directories currently installed.)
Preparing to unpack .../dpkg_1.18.24-18_armhf.deb ...
Unpacking dpkg (1.18.24-18) over (1.18.24-18) ...
Setting up dpkg (1.18.24-18) ...
(Reading database ... 3326 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.7.6-~1_armhf.deb ...
Unpacking libgcrypt20 (1.7.6-~1) over (1.7.6-~1) ...
Setting up libgcrypt20 (1.7.6-~1) ...
(Reading database ... 3326 files and directories currently installed.)
Preparing to unpack .../apt_1.4.8-71.1_armhf.deb ...
Unpacking apt (1.4.8-71.1) over (1.4.8-70.12) ...
Setting up apt (1.4.8-71.1) ...
(Reading database ... 3325 files and directories currently installed.)
Preparing to unpack .../archives/base_0-103_armhf.deb ...
Unpacking base (0-103) over (0-102.5) ...
Setting up base (0-103) ...
Installing new version of config file /etc/passwd ...
(Reading database ... 3325 files and directories currently installed.)
Preparing to unpack .../archives/init_0-106_armhf.deb ...
Unpacking init (0-106) over (0-105.4) ...
Setting up init (0-106) ...
(Reading database ... 3325 files and directories currently installed.)
Preparing to unpack .../udev_232-48.1_armhf.deb ...
Unpacking udev (232-48.1) over (232-47.1) ...
Preparing to unpack .../psplash_2009.05.28-22.1_armhf.deb ...
Unpacking psplash (2009.05.28-22.1) over (2009.05.28-22) ...
Setting up psplash (2009.05.28-22.1) ...
Setting up udev (232-48.1) ...
MLD> apt install  vdr-plugin-softhddevice
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package vdr-plugin-softhddevice is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  vdr-plugin-skincurses vdr-plugin-gstreamer

E: Package 'vdr-plugin-softhddevice' has no installation candidate
MLD>

Gruß
Arthur
Logged

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20531
    • View Profile
    • ClausMuus.de
BananaPro Testing Image satip-shd läuft nicht
« Reply #7 on: October 31, 2018, 20:15:56 »
Das liegt jetzt da dran, dass es derzeit für den BPI nur unstable Pakete gibt. Du musst also im Setup auf unstable umstellen.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #8 on: November 12, 2018, 20:24:41 »
mit Unstable geht es leider auch nicht.
Habe das Testing Netinstall heruntergeladen. Auf Unstable umgestellt und Installiert.
Doch das Packet vdr-plugin-softhddevice lässt sich wieder nicht installieren.
Mit apt list auch nicht aufgeführt.

Die Unstable Images lassen sich ebenfalls nicht herunterladen. (Link defekt?)

Habe nebenbei noch eine Entwicklungsumgebung aufgesetzt.
Habe mir das satip-shd Image compiliert.
Da läuft das Netwerk nach dem Start vom vdr-plugin-softhddevice nicht mehr.
Nach ifconfig eth0 down und wieder up läft es dann doch.

Schade das ich keine funktionierenden BananaPro zum laufen  bekomme.   :(

Gruß Arthur
Logged

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20531
    • View Profile
    • ClausMuus.de
BananaPro Testing Image satip-shd läuft nicht
« Reply #9 on: November 12, 2018, 21:49:28 »
Das Netzwerk Problem ist bekannt. Sobald Du das Menü auf machst ist das Netzwerk dann wieder weg. Aber vielleicht hast Du ja Lust, Zeit und Muße einen Debugger zu bemühen und den Auslöser des Netzwerk Fehlers zu suchen.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline VDRman

  • Newbie
  • *
  • Posts: 6
    • View Profile
BananaPro Testing Image satip-shd läuft nicht
« Reply #10 on: November 13, 2018, 21:02:44 »
Hallo Claus,

des auslöser ist das SHD-Plugin.
Danach kommt im sysinit LOG:
Code: [Select]
Setting up vdr-plugin-softhddevice:armhf-bpi (2018.11.09-75+2.4.0.216.2+root) ...                       done
  Waiting for locales
Setting up localhost:                                                                                   done
Load preselected kernel modules:
modprobe: can't load module rc_core (kernel/drivers/media/rc/rc-core.ko): invalid module format
modprobe: can't load module uinput (kernel/drivers/input/misc/uinput.ko): invalid module format         failed

und das kommt dann im messages LOG:

Code: [Select]
Jan  1 00:00:08 (MLD-BPI) user.warn kernel: [   68.551025] eth0: device MAC address 02:85:08:03:40:16
Jan  1 00:00:08 (MLD-BPI) user.info kernel: [   68.597177] sunxi_gmac: probed
Jan  1 00:00:08 (MLD-BPI) user.info kernel: [   68.602609] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
Jan  1 00:00:08 (MLD-BPI) user.info kernel: [   68.610141] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
Jan  1 00:00:14 (MLD-BPI) user.info kernel: [   74.615188] PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
Jan  1 00:00:18 (MLD-BPI) user.debug kernel: [   79.404871] eth0: no IPv6 routers present
Jan  1 01:00:20 (MLD-BPI) user.err vdr: video/vdpau: doesn't support yuvy video surface
Jan  1 00:00:20 (MLD-BPI) user.warn kernel: [   80.925616] Warning: this sunxi disp driver will see significant redesign.
Jan  1 00:00:20 (MLD-BPI) user.warn kernel: [   80.937213] Applications using /dev/disp directly will break.
Jan  1 00:00:20 (MLD-BPI) user.warn kernel: [   80.943598] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
Jan  1 00:00:20 (MLD-BPI) user.warn kernel: [   80.946690] [DISP] layer allocated: 0,101
Jan  1 00:00:20 (MLD-BPI) user.warn kernel: [   80.949677] [DISP] layer allocated: 0,102
Jan  1 01:00:22 (MLD-BPI) user.err vdr: [16224] curl_easy_perform() [discover.c,213] failed: Timeout was reached (28)
Jan  1 01:00:22 (MLD-BPI) user.err vdr: [16224] SATIP-ERROR: Discovery detected invalid status code: 0
Jan  1 00:00:22 (MLD-BPI) user.warn kernel: [   83.151016] [DISP] layer released: 0,101
Jan  1 00:00:22 (MLD-BPI) user.warn kernel: [   83.153908] [DISP] layer released: 0,102
Jan  1 00:00:22 (MLD-BPI) user.warn kernel: [   83.159319] [DISP] layer allocated: 0,101
Jan  1 00:00:22 (MLD-BPI) user.warn kernel: [   83.162298] [DISP] layer allocated: 0,102
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.487796] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.493657] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.499512] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.505342] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.511196] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.517034] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.522877] ndesc Error: Oversized Ethernet frame spanned multiple buffers
Jan  1 00:00:23 (MLD-BPI) user.warn kernel: [   83.528717] ndesc Error: Oversized Ethernet frame spanned multiple buffers

Aber ich schau mal ob ich das genauer herausbekomme.

Gruß Arthur
Logged

[1] MLD-5.x / Systems / Banana PI / BananaPro Testing Image satip-shd läuft nicht
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.