Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - MR-Caos

1
Allgemein [ General ] / 5.4 testing skindesigner estuary4vdr keine icons
« on: March 06, 2018, 16:42:18 »
Hallo,

Seit dem Downgrade des VDR's habe ich im Skin estuary4vdr im Menü keine Icons mehr.

joe

2
x86 Systeme (PC) / MLD 5.4 Testing -- vdr-plugin-osdteletext
« on: March 04, 2018, 19:50:15 »
Ich habe die besagte Schriftart mal reinkopiert.
Es ist besser aber noch nicht perfekt siehe Anhang.

3
x86 Systeme (PC) / MLD 5.4 Testing -- vdr-plugin-osdteletext
« on: March 04, 2018, 19:36:18 »
Quote from: clausmuus on March 04, 2018, 18:55:18
Wenn ich das richtig gesehen habe, wird derzeit im VDR Portal über solche Fehler diskutiert. Sollte es da eine Lösung geben, und diese eingecheckt werden, so wird das automatisch in die MLD übernommen.

Hallo Claus,

Ist das die Lösung? https://projects.vdr-developer.org/git/vdr-plugin-osdteletext.git/diff/README?id=b2df8095dee3bec5f0a5cf9a363b364512ed3df9

You need to install the teletext2.ttf font in order to render special graphics

4
x86 Systeme (PC) / MLD 5.4 Testing -- vdr-plugin-osdteletext
« on: March 04, 2018, 18:07:30 »
Hallo,

Habe leider immer noch Darstellungsprobleme.
Im Anhang Beispiel KIKA Teletext.

joe

5
x86 Systeme (PC) / MLD 5.4 Testing -- vdr-plugin-osdteletext
« on: February 17, 2018, 10:47:23 »
Hallo,
Bei mir hat das Plugin leichte Darstellungsprobleme. Teilweise Rechtecke dort wo es einen ausgefüllten Hintergrund geben sollte.

joe

6
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: February 04, 2018, 11:31:59 »
Quote from: mikeM on January 02, 2018, 22:48:24
Ok, ich antworte mir mal selbst.
  • Installieren: NUR lirc
  • Auswahl im WebIf ->Lirc Treiber: irman
  • Lirc Start Parameter-> --device=/dev/ttyACM0
  • Meine lircd.conf einspielen (Hab ich, glaube ich, bei easyvdr geklaut. Ist für eine Logitech Harmony mit dem KLS Profil)


Fertig. Und dann läuft der USB Eco ohne Probleme im VDR. Kodi muss ich dann mal probieren. Auch beim booten gibt es keine Verzögerung, die ich mit lircd2uinput auch hatte.

Gruß
Michael

Danke Michael
So funktioniert sie im VDR wunderbar im Kodi nicht out-of-the-box.

Wenn du in der Datei /etc/init.d/udev die Zeile "udevadm settle" auskommentiert, geht alles wieder normal auch mit lircd2uinput.

siehe https://www.minidvblinux.de/forum/index.php/topic,8900.msg68746.html#msg68746

7
Entwicklung [ Development ] / Probleme mit Hama-mce Fernbedienung
« on: December 30, 2017, 15:36:56 »
RPI2
Code: [Select]
RPI2> udevadm monitor --kernel --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent


KERNEL[1681.779543] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4 (usb)
KERNEL[1681.782921] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0 (usb)
UDEV  [1681.789731] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4 (usb)
UDEV  [1681.796772] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0 (usb)
KERNEL[1681.817392] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003 (hid)
KERNEL[1681.820479] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4 (input)
UDEV  [1681.826374] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003 (hid)
UDEV  [1681.835002] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4 (input)
KERNEL[1681.884650] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::numlock (leds)
KERNEL[1681.885628] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::numlock (leds)
KERNEL[1681.885861] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::capslock (leds)
KERNEL[1681.886098] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::capslock (leds)
KERNEL[1681.886348] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::scrolllock (leds)
KERNEL[1681.886615] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::scrolllock (leds)
KERNEL[1681.888068] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/event0 (input)
KERNEL[1681.888527] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/hidraw/hidraw0 (hidraw)
KERNEL[1681.889630] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1 (usb)
UDEV  [1681.898885] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::capslock (leds)
UDEV  [1681.900410] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::numlock (leds)
UDEV  [1681.910224] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::numlock (leds)
UDEV  [1681.910646] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::capslock (leds)
UDEV  [1681.913038] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::scrolllock (leds)
UDEV  [1681.917437] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1 (usb)
UDEV  [1681.920975] change   /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/input4::scrolllock (leds)
UDEV  [1681.921905] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/hidraw/hidraw0 (hidraw)
KERNEL[1681.999595] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004 (hid)
KERNEL[1682.003563] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5 (input)
UDEV  [1682.005944] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004 (hid)
UDEV  [1682.015708] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5 (input)
KERNEL[1682.071057] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5/mouse0 (input)
KERNEL[1682.071479] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5/event1 (input)
KERNEL[1682.071763] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/hidraw/hidraw1 (hidraw)
UDEV  [1682.085906] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/hidraw/hidraw1 (hidraw)
UDEV  [1682.091983] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5/mouse0 (input)
UDEV  [1682.236844] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0003/input/input4/event0 (input)
UDEV  [1682.421425] add      /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:05A4:9881.0004/input/input5/event1 (input)
KERNEL[1682.424586] add      /devices/virtual/input/input7 (input)
KERNEL[1682.426531] add      /devices/virtual/input/input7/mouse1 (input)
KERNEL[1682.427035] add      /devices/virtual/input/input7/event2 (input)
UDEV  [1682.430921] add      /devices/virtual/input/input7 (input)
UDEV  [1682.435226] add      /devices/virtual/input/input7/mouse1 (input)
UDEV  [1682.574335] add      /devices/virtual/input/input7/event2 (input)


RPI2> mode2 -H devinput -d /dev/input/ira
Using driver devinput on device /dev/input/ira
Trying device: /dev/input/ira
Using device: /dev/input/ira
Warning: Running as root.
code: 0x4a89475a692f070004000400e3000700
code: 0x4a89475a692f070001007d0001000000
code: 0x4a89475a692f07000000000000000000
code: 0x4a89475a9c4e070004000400e2000700
code: 0x4a89475a9c4e07000100380001000000
code: 0x4a89475a9c4e07000000000000000000
code: 0x4a89475ad66d07000400040028000700
code: 0x4a89475ad66d070001001c0001000000
code: 0x4a89475ad66d07000000000000000000
code: 0x4a89475a5f29080004000400e2000700
code: 0x4a89475a5f2908000100380000000000
code: 0x4a89475a5f29080004000400e3000700
code: 0x4a89475a5f29080001007d0000000000
code: 0x4a89475a5f2908000400040028000700
code: 0x4a89475a5f29080001001c0000000000
code: 0x4a89475a5f2908000000000000000000

RPI2> evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      HID 05a4:9881
/dev/input/event1:      HID 05a4:9881
Select the device event number [0-1]: 0
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x5a4 product 0x9881 version 0x110
Input device name: "HID 05a4:9881"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 1 (KEY_ESC)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 12 (KEY_MINUS)
    Event code 13 (KEY_EQUAL)
    Event code 14 (KEY_BACKSPACE)
    Event code 15 (KEY_TAB)
    Event code 16 (KEY_Q)
    Event code 17 (KEY_W)
    Event code 18 (KEY_E)
    Event code 19 (KEY_R)
    Event code 20 (KEY_T)
    Event code 21 (KEY_Y)
    Event code 22 (KEY_U)
    Event code 23 (KEY_I)
    Event code 24 (KEY_O)
    Event code 25 (KEY_P)
    Event code 26 (KEY_LEFTBRACE)
    Event code 27 (KEY_RIGHTBRACE)
    Event code 28 (KEY_ENTER)
    Event code 29 (KEY_LEFTCTRL)
    Event code 30 (KEY_A)
    Event code 31 (KEY_S)
    Event code 32 (KEY_D)
    Event code 33 (KEY_F)
    Event code 34 (KEY_G)
    Event code 35 (KEY_H)
    Event code 36 (KEY_J)
    Event code 37 (KEY_K)
    Event code 38 (KEY_L)
    Event code 39 (KEY_SEMICOLON)
    Event code 40 (KEY_APOSTROPHE)
    Event code 41 (KEY_GRAVE)
    Event code 42 (KEY_LEFTSHIFT)
    Event code 43 (KEY_BACKSLASH)
    Event code 44 (KEY_Z)
    Event code 45 (KEY_X)
    Event code 46 (KEY_C)
    Event code 47 (KEY_V)
    Event code 48 (KEY_B)
    Event code 49 (KEY_N)
    Event code 50 (KEY_M)
    Event code 51 (KEY_COMMA)
    Event code 52 (KEY_DOT)
    Event code 53 (KEY_SLASH)
    Event code 54 (KEY_RIGHTSHIFT)
    Event code 55 (KEY_KPASTERISK)
    Event code 56 (KEY_LEFTALT)
    Event code 57 (KEY_SPACE)
    Event code 58 (KEY_CAPSLOCK)
    Event code 59 (KEY_F1)
    Event code 60 (KEY_F2)
    Event code 61 (KEY_F3)
    Event code 62 (KEY_F4)
    Event code 63 (KEY_F5)
    Event code 64 (KEY_F6)
    Event code 65 (KEY_F7)
    Event code 66 (KEY_F8)
    Event code 67 (KEY_F9)
    Event code 68 (KEY_F10)
    Event code 69 (KEY_NUMLOCK)
    Event code 70 (KEY_SCROLLLOCK)
    Event code 71 (KEY_KP7)
    Event code 72 (KEY_KP8)
    Event code 73 (KEY_KP9)
    Event code 74 (KEY_KPMINUS)
    Event code 75 (KEY_KP4)
    Event code 76 (KEY_KP5)
    Event code 77 (KEY_KP6)
    Event code 78 (KEY_KPPLUS)
    Event code 79 (KEY_KP1)
    Event code 80 (KEY_KP2)
    Event code 81 (KEY_KP3)
    Event code 82 (KEY_KP0)
    Event code 83 (KEY_KPDOT)
    Event code 86 (KEY_102ND)
    Event code 87 (KEY_F11)
    Event code 88 (KEY_F12)
    Event code 96 (KEY_KPENTER)
    Event code 97 (KEY_RIGHTCTRL)
    Event code 98 (KEY_KPSLASH)
    Event code 99 (KEY_SYSRQ)
    Event code 100 (KEY_RIGHTALT)
    Event code 102 (KEY_HOME)
    Event code 103 (KEY_UP)
    Event code 104 (KEY_PAGEUP)
    Event code 105 (KEY_LEFT)
    Event code 106 (KEY_RIGHT)
    Event code 107 (KEY_END)
    Event code 108 (KEY_DOWN)
    Event code 109 (KEY_PAGEDOWN)
    Event code 110 (KEY_INSERT)
    Event code 111 (KEY_DELETE)
    Event code 119 (KEY_PAUSE)
    Event code 125 (KEY_LEFTMETA)
    Event code 126 (KEY_RIGHTMETA)
    Event code 127 (KEY_COMPOSE)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 17 (EV_LED)
    Event code 0 (LED_NUML) state 0
    Event code 1 (LED_CAPSL) state 0
    Event code 2 (LED_SCROLLL) state 0
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    250
    Repeat code 1 (REP_PERIOD)
      Value     33
Properties:
Testing ... (interrupt to exit)
Event: time 1514638019.038918, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3
Event: time 1514638019.038918, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1514638019.038918, -------------- SYN_REPORT ------------
Event: time 1514638019.046898, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e2
Event: time 1514638019.046898, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 1
Event: time 1514638019.046898, -------------- SYN_REPORT ------------
Event: time 1514638019.054904, type 4 (EV_MSC), code 4 (MSC_SCAN), value 70028
Event: time 1514638019.054904, type 1 (EV_KEY), code 28 (KEY_ENTER), value 1
Event: time 1514638019.054904, -------------- SYN_REPORT ------------
Event: time 1514638019.110913, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e2
Event: time 1514638019.110913, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1514638019.110913, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3
Event: time 1514638019.110913, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1514638019.110913, type 4 (EV_MSC), code 4 (MSC_SCAN), value 70028
Event: time 1514638019.110913, type 1 (EV_KEY), code 28 (KEY_ENTER), value 0
Event: time 1514638019.110913, -------------- SYN_REPORT ------------

RPI2> eventlircd -f -vvv
eventlircd[3667]: /etc/eventlircd.d/hama-mce.evmap: using 42 valid keyboard shortcut mappings
eventlircd[3667]: input device /dev/input/event0: events of unsupported event type EV_MSC will be discarded
eventlircd[3667]: input device /dev/input/event0: event code 0x04 of unsupported event type EV_MSC will be discarded
eventlircd[3667]: input device /dev/input/event0: events of unsupported event type EV_REP will be discarded
eventlircd[3667]: input device /dev/input/event0: grabbed
eventlircd[3667]: /etc/eventlircd.d/hama-mce.evmap: using 42 valid keyboard shortcut mappings
eventlircd[3667]: input device /dev/input/event1: events of unsupported event type EV_MSC will be discarded
eventlircd[3667]: input device /dev/input/event1: event code 0x04 of unsupported event type EV_MSC will be discarded
eventlircd[3667]: input device /dev/input/event1: grabbed
eventlircd[3667]: input device /dev/input/event1: created output event device


RPI2> irw
8b 0 KEY_MENU devinput
joe

8
Entwicklung [ Development ] / Probleme mit Hama-mce Fernbedienung
« on: December 30, 2017, 15:36:01 »
Sorry das ich altes Thema hoch hole.

Leider funktioniert der Hama MCE Empfänger seit MLD5.3 nicht mehr richtig auf x86 Systemen (bei Tastenkombinationen von  alt+meta+KEY_ENTER  usw.. kommt nur die letzte Taste bei IRW raus), auf RPI 2 Systemen funktioniert es aber normal.

Im Anhang vergleiche von x86 und RPI bei beiden System wurde jeweils nur die "grüne" Menü Taste gedrückt und müsste  alt+meta+KEY_ENTER ergeben.

Beide Systeme sind auf MLD5.4 unstable


x86
Code: [Select]
MLD> udevadm monitor --kernel --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[485.166625] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6 (usb)
KERNEL[485.167343] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0 (usb)
UDEV  [485.167438] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6 (usb)
UDEV  [485.167855] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0 (usb)
KERNEL[485.174827] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005 (hid)
KERNEL[485.174936] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15 (input)
UDEV  [485.175516] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005 (hid)
UDEV  [485.176181] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15 (input)
KERNEL[485.226130] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::numlock (leds)
KERNEL[485.226160] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::numlock (leds)
KERNEL[485.226174] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::capslock (leds)
KERNEL[485.226188] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::capslock (leds)
KERNEL[485.226197] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::scrolllock (leds)
KERNEL[485.226208] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::scrolllock (leds)
KERNEL[485.226405] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/event2 (input)
KERNEL[485.226427] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/hidraw/hidraw0 (hidraw)
KERNEL[485.226448] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005 (hid)
KERNEL[485.226467] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0 (usb)
KERNEL[485.226485] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1 (usb)
UDEV  [485.227117] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::numlock (leds)
UDEV  [485.227583] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::numlock (leds)
UDEV  [485.228034] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/hidraw/hidraw0 (hidraw)
UDEV  [485.228506] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::scrolllock (leds)
UDEV  [485.228888] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::scrolllock (leds)
UDEV  [485.229445] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::capslock (leds)
UDEV  [485.229562] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1 (usb)
UDEV  [485.229856] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/input15::capslock (leds)
UDEV  [485.243658] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005/input/input15/event2 (input)
UDEV  [485.244344] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:05A4:9881.0005 (hid)
UDEV  [485.244660] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0 (usb)
KERNEL[485.248415] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006 (hid)
KERNEL[485.248744] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17 (input)
UDEV  [485.249097] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006 (hid)
UDEV  [485.249758] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17 (input)
KERNEL[485.300203] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17/mouse0 (input)
KERNEL[485.300231] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17/event3 (input)
KERNEL[485.300948] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/hidraw/hidraw1 (hidraw)
KERNEL[485.300976] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006 (hid)
KERNEL[485.300995] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1 (usb)
KERNEL[485.301021] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6 (usb)
UDEV  [485.301475] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17/mouse0 (input)
UDEV  [485.302030] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/hidraw/hidraw1 (hidraw)
UDEV  [485.317142] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006/input/input17/event3 (input)
KERNEL[485.317590] add      /devices/virtual/input/input18 (input)
KERNEL[485.317691] add      /devices/virtual/input/input18/mouse1 (input)
KERNEL[485.317803] add      /devices/virtual/input/input18/event6 (input)
UDEV  [485.318438] add      /devices/virtual/input/input18 (input)
UDEV  [485.318466] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:05A4:9881.0006 (hid)
UDEV  [485.318481] add      /devices/virtual/input/input18/event6 (input)
UDEV  [485.318494] add      /devices/virtual/input/input18/mouse1 (input)
UDEV  [485.318882] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1 (usb)
UDEV  [485.319208] bind     /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6 (usb)



MLD> mode2 -H devinput -d /dev/input/ira
Using driver devinput on device /dev/input/ira
Trying device: /dev/input/ira
Using device: /dev/input/ira
Warning: Running as root.
code: 0xe888475a00000000765b04000000000004000400e3000700
code: 0xe888475a00000000765b04000000000001007d0001000000
code: 0xe888475a00000000765b0400000000000000000000000000
code: 0xe888475a00000000ab7a04000000000004000400e2000700
code: 0xe888475a00000000ab7a0400000000000100380001000000
code: 0xe888475a00000000ab7a0400000000000000000000000000
code: 0xe888475a00000000ec990400000000000400040028000700
code: 0xe888475a00000000ec9904000000000001001c0001000000
code: 0xe888475a00000000ec990400000000000000000000000000
code: 0xe888475a00000000279405000000000004000400e2000700
code: 0xe888475a0000000027940500000000000100380000000000
code: 0xe888475a00000000279405000000000004000400e3000700
code: 0xe888475a00000000279405000000000001007d0000000000
code: 0xe888475a0000000027940500000000000400040028000700
code: 0xe888475a00000000279405000000000001001c0000000000
code: 0xe888475a0000000027940500000000000000000000000000


MLD> evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      Power Button
/dev/input/event1:      Power Button
/dev/input/event2:      HID 05a4:9881
/dev/input/event3:      HID 05a4:9881
/dev/input/event4:      HDA NVidia HDMI/DP,pcm=3
/dev/input/event5:      HDA NVidia HDMI/DP,pcm=7
Select the device event number [0-5]: 2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x5a4 product 0x9881 version 0x110
Input device name: "HID 05a4:9881"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 1 (KEY_ESC)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 12 (KEY_MINUS)
    Event code 13 (KEY_EQUAL)
    Event code 14 (KEY_BACKSPACE)
    Event code 15 (KEY_TAB)
    Event code 16 (KEY_Q)
    Event code 17 (KEY_W)
    Event code 18 (KEY_E)
    Event code 19 (KEY_R)
    Event code 20 (KEY_T)
    Event code 21 (KEY_Y)
    Event code 22 (KEY_U)
    Event code 23 (KEY_I)
    Event code 24 (KEY_O)
    Event code 25 (KEY_P)
    Event code 26 (KEY_LEFTBRACE)
    Event code 27 (KEY_RIGHTBRACE)
    Event code 28 (KEY_ENTER)
    Event code 29 (KEY_LEFTCTRL)
    Event code 30 (KEY_A)
    Event code 31 (KEY_S)
    Event code 32 (KEY_D)
    Event code 33 (KEY_F)
    Event code 34 (KEY_G)
    Event code 35 (KEY_H)
    Event code 36 (KEY_J)
    Event code 37 (KEY_K)
    Event code 38 (KEY_L)
    Event code 39 (KEY_SEMICOLON)
    Event code 40 (KEY_APOSTROPHE)
    Event code 41 (KEY_GRAVE)
    Event code 42 (KEY_LEFTSHIFT)
    Event code 43 (KEY_BACKSLASH)
    Event code 44 (KEY_Z)
    Event code 45 (KEY_X)
    Event code 46 (KEY_C)
    Event code 47 (KEY_V)
    Event code 48 (KEY_B)
    Event code 49 (KEY_N)
    Event code 50 (KEY_M)
    Event code 51 (KEY_COMMA)
    Event code 52 (KEY_DOT)
    Event code 53 (KEY_SLASH)
    Event code 54 (KEY_RIGHTSHIFT)
    Event code 55 (KEY_KPASTERISK)
    Event code 56 (KEY_LEFTALT)
    Event code 57 (KEY_SPACE)
    Event code 58 (KEY_CAPSLOCK)
    Event code 59 (KEY_F1)
    Event code 60 (KEY_F2)
    Event code 61 (KEY_F3)
    Event code 62 (KEY_F4)
    Event code 63 (KEY_F5)
    Event code 64 (KEY_F6)
    Event code 65 (KEY_F7)
    Event code 66 (KEY_F8)
    Event code 67 (KEY_F9)
    Event code 68 (KEY_F10)
    Event code 69 (KEY_NUMLOCK)
    Event code 70 (KEY_SCROLLLOCK)
    Event code 71 (KEY_KP7)
    Event code 72 (KEY_KP8)
    Event code 73 (KEY_KP9)
    Event code 74 (KEY_KPMINUS)
    Event code 75 (KEY_KP4)
    Event code 76 (KEY_KP5)
    Event code 77 (KEY_KP6)
    Event code 78 (KEY_KPPLUS)
    Event code 79 (KEY_KP1)
    Event code 80 (KEY_KP2)
    Event code 81 (KEY_KP3)
    Event code 82 (KEY_KP0)
    Event code 83 (KEY_KPDOT)
    Event code 86 (KEY_102ND)
    Event code 87 (KEY_F11)
    Event code 88 (KEY_F12)
    Event code 96 (KEY_KPENTER)
    Event code 97 (KEY_RIGHTCTRL)
    Event code 98 (KEY_KPSLASH)
    Event code 99 (KEY_SYSRQ)
    Event code 100 (KEY_RIGHTALT)
    Event code 102 (KEY_HOME)
    Event code 103 (KEY_UP)
    Event code 104 (KEY_PAGEUP)
    Event code 105 (KEY_LEFT)
    Event code 106 (KEY_RIGHT)
    Event code 107 (KEY_END)
    Event code 108 (KEY_DOWN)
    Event code 109 (KEY_PAGEDOWN)
    Event code 110 (KEY_INSERT)
    Event code 111 (KEY_DELETE)
    Event code 119 (KEY_PAUSE)
    Event code 125 (KEY_LEFTMETA)
    Event code 126 (KEY_RIGHTMETA)
    Event code 127 (KEY_COMPOSE)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 17 (EV_LED)
    Event code 0 (LED_NUML) state 1
    Event code 1 (LED_CAPSL) state 0
    Event code 2 (LED_SCROLLL) state 0
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    250
    Repeat code 1 (REP_PERIOD)
      Value     33
Properties:
Testing ... (interrupt to exit)
Event: time 1514638001.616564, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3
Event: time 1514638001.616564, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1514638001.616564, -------------- SYN_REPORT ------------
Event: time 1514638001.624557, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e2
Event: time 1514638001.624557, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 1
Event: time 1514638001.624557, -------------- SYN_REPORT ------------
Event: time 1514638001.632558, type 4 (EV_MSC), code 4 (MSC_SCAN), value 70028
Event: time 1514638001.632558, type 1 (EV_KEY), code 28 (KEY_ENTER), value 1
Event: time 1514638001.632558, -------------- SYN_REPORT ------------
Event: time 1514638001.688497, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e2
Event: time 1514638001.688497, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1514638001.688497, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3
Event: time 1514638001.688497, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1514638001.688497, type 4 (EV_MSC), code 4 (MSC_SCAN), value 70028
Event: time 1514638001.688497, type 1 (EV_KEY), code 28 (KEY_ENTER), value 0
Event: time 1514638001.688497, -------------- SYN_REPORT ------------

MLD> eventlircd -f -vvv
eventlircd[28409]: /etc/eventlircd.d/hama-mce.evmap: using 42 valid keyboard shortcut mappings
eventlircd[28409]: input device /dev/input/event2: events of unsupported event type EV_MSC will be discarded
eventlircd[28409]: input device /dev/input/event2: event code 0x04 of unsupported event type EV_MSC will be discarded
eventlircd[28409]: input device /dev/input/event2: events of unsupported event type EV_REP will be discarded
eventlircd[28409]: input device /dev/input/event2: grabbed
eventlircd[28409]: /etc/eventlircd.d/hama-mce.evmap: using 42 valid keyboard shortcut mappings
eventlircd[28409]: input device /dev/input/event3: events of unsupported event type EV_MSC will be discarded
eventlircd[28409]: input device /dev/input/event3: event code 0x04 of unsupported event type EV_MSC will be discarded
eventlircd[28409]: input device /dev/input/event3: grabbed
eventlircd[28409]: input device /dev/input/event3: created output event device

MLD> irw
1c 0 KEY_ENTER devinput

9
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 17, 2017, 19:43:11 »
Hallo,

Hab bei meinen 5.4 Testing schrittweise Upgrade gemacht bis nur noch das UDEV Paket übrig blieb.
Wenn ich dieses von "232-47 => 235-47.1" update habe ich 1min start Verzögerung mit dieser Meldung:
Code: [Select]
Dec  2 10:33:16 (MLD) daemon.warn kernel: [  230.609133] udevd[798]: seq 3633 '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0' is taking a long time
Dec  2 10:35:16 (MLD) daemon.err kernel: [  350.611176] udevd[798]: seq 3633 '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0' killed
Dec  2 10:35:16 (MLD) daemon.warn kernel: [  350.611758] udevd[798]: worker [8113] terminated by signal 9 (KILL)
Dec  2 10:35:16 (MLD) daemon.err kernel: [  350.611763] udevd[798]: worker [8113] failed while handling '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0'
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612061] udevd[8221]: seq 4587 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612329] udevd[8221]: seq 4587 processed
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612525] udevd[8221]: seq 4588 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612988] udevd[8221]: seq 4588 processed
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613070] udevd[8221]: seq 4589 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613099] udevd[8227]: seq 4590 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613464] udevd[8221]: seq 4589 processed
Habe jetzt mi "echo udev hold | dpkg --set-selections" das Paket auf Hold gesetzt.

10
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 07, 2017, 19:34:58 »
Hallo,
Code: [Select]
BusyBox v1.25.1 (2017-11-30 06:38:03 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

vdrhd> ir-keytable
Couldn't find any node at /sys/class/rc/rc*.
vdrhd> cd /dev/input/

Code: [Select]
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    250
    Repeat code 1 (REP_PERIOD)
      Value     33
Properties:
Testing ... (interrupt to exit)
Event: time 1512671622.304743, type 1 (EV_KEY), code 139 (KEY_MENU), value 1
Event: time 1512671622.304743, -------------- SYN_REPORT ------------
Event: time 1512671622.505692, type 1 (EV_KEY), code 139 (KEY_MENU), value 0
Event: time 1512671622.505692, -------------- SYN_REPORT ------------
vdrhd> evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      Power Button
/dev/input/event1:      Power Button
/dev/input/event2:      HDA Intel PCH Rear Mic
/dev/input/event3:      HDA Intel PCH Line
/dev/input/event4:      HDA Intel PCH Line Out Front
/dev/input/event5:      HDA Intel PCH Line Out Surround
/dev/input/event6:      HDA Intel PCH Line Out CLFE
/dev/input/event7:      HDA NVidia HDMI/DP,pcm=3
/dev/input/event8:      HDA NVidia HDMI/DP,pcm=7
/dev/input/event9:      lircd-uinput
Select the device event number [0-9]:

11
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 07, 2017, 18:45:20 »
Die lircd.config hatte ich auch für MLD5.3 gebraucht und damals unter Windows erstellt.

Ich habe in der rc.config beim lirc modul "ttyACM0" eingetragen seitdem habe ich auf evtest die Tastenbefehle nur VDR bekommt noch nichts.

12
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 07, 2017, 12:55:19 »
Hallo,

Ich bin jetzt soweit das ich mit evtest die Tasten empfange. Wie mache ich jetzt am besten weiter eventlircd -f -vvv bringt keine Ausgabe.

Joe

13
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 03, 2017, 19:08:26 »
KO Kriterium bedeutet hoffentlich nicht das der Empfänger nicht mehr von MLD Unterstützt wird. Bin von Hama-Mce auf diesen Empfänger umgestiegen da der Hama mit MLD5.3 nicht mehr funktionierte.

Wenn ich irgendwas testen soll bin ich natürlich jederzeit bereit. Dank der genialen Snapshot Funktion kann ja fast nicht schief gehn.

Joe

14
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 03, 2017, 18:34:17 »
Meine lircd.conf (Phillips VCR Codes)

Code: [Select]
# lircd.conf - Configuration for Atric IR-Wakeup-USB
#
# brand:      unknown
# model:      VDR
# receiver:   IR-WakeupUSB
#
#--- Konfigurations-Strings zur Auto-Konfiguration für Easy-VDR (und andere Programme) ---
#
# Atric_FB_Name_Str="VDR"
# Atric_FB_Conf_Str="0001050E00000000000202141329280000000000000000000000007F000000000000FF24008002000000"
#
#----------------------------------------------------------------------------
# ATTENTION! Do NOT use "irrecord" to automaticly learn key-codes
# This will generate wrong remote settings with the IR-WakeupUSB!
#
# Manually fill in key-names and key-codes in the "codes section" or
# use the "lircd.conf"-tool of the IR-WakeupUSB configuration software
#
#----------------------------------------------------------------------------
# Do NOT change the following remote settings
# These settings depends on the IR-WakeupUSB and are independent from
# the used remote control.
#
# You can change the name of the remote control to assign the file to the
# remote control.
# You can also add your own remarks (use the remark tag "#").
#----------------------------------------------------------------------------

begin remote

  name            VDR
  bits            48
  flags           SPACE_ENC
  eps             30
  aeps            100
  one             0  0
  zero            0  0
  pre_data_bits   16
  pre_data        0xFFFF
  post_data_bits  0
  post_data       0x0
  gap             65536
  repeat_bit      0
  toggle_bit_mask 0x0


#----------------------------------------------------------------------------
# Here (after the "begin codes" tag) fill in the keycodes (one key per row)
# Use the following syntax:
#
# KEY_1    0x03B800000000 # remark (optional)
#
# Description: KEY_1:  the name of the remote button
# for a full list of available key names use the
# following command: "irrecord --list-namespace"
#
#       0x3B800000000:  IR-code of the remote button (48-bit hexcode)
#
#      # remark:  optional remark for the named key
# this remark will be showed in the "lircd.conf"-tool
# of the configuration software
#----------------------------------------------------------------------------


  begin codes

    KEY_UP                   0xD00200000000      # Nach oben
    KEY_DOWN                 0xD10200000000      # Nach unten
    KEY_MENU                 0xD20200000000      # Menü
    KEY_OK                   0xD70200000000      # OK/Eingabe
    KEY_ESC                  0xD30200000000      # Zurück
    KEY_LEFT                 0xD50200000000      # Nach links
    KEY_RIGHT                0xD60200000000      # Nach rechts
    KEY_RED                  0xB70200000000      # Rot
    KEY_GREEN                0xB60200000000      # Grün
    KEY_YELLOW               0xB00200000000      # Gelb
    KEY_BLUE                 0xB40200000000      # Blau
    KEY_0                    0x800200000000      # Ziffer 0
    KEY_1                    0x810200000000      # Ziffer 1
    KEY_2                    0x820200000000      # Ziffer 2
    KEY_3                    0x830200000000      # Ziffer 3
    KEY_4                    0x840200000000      # Ziffer 4
    KEY_5                    0x850200000000      # Ziffer 5
    KEY_6                    0x860200000000      # Ziffer 6
    KEY_7                    0x870200000000      # Ziffer 7
    KEY_8                    0x880200000000      # Ziffer 8
    KEY_9                    0x890200000000      # Ziffer 9
    KEY_INFO                 0x8F0200000000      # Info zum aktuellen Objekt
    KEY_PLAYPAUSE            0xB50200000000
    KEY_PLAY                 0x000000000000      # Play
    KEY_PAUSE                0x000000000000      # Pause
    KEY_STOP                 0xB20200000000      # Stop
    KEY_RECORD               0x000000000000      # Aufnehmen
    KEY_FASTFORWARD          0x000000000000
    KEY_REWIND               0x000000000000      # Zurückspulen
    KEY_NEXT                 0x000000000000      # Vorwärts springen
    KEY_BACK                 0xD30200000000      # Rückwärts springen
    KEY_POWER2               0x8C0200000000
    KEY_CHANNELUP            0xA00200000000      # Kanal hoch
    KEY_CHANNELDOWN          0xA10200000000      # Kanal runter
    KEY_PREVIOUS             0xBA0200000000
    KEY_VOLUMEUP             0x000000000000      # Lautstärke erhöhen
    KEY_VOLUMEDOWN           0x000000000000      # Lautstärke verringern
    KEY_MUTE                 0x000000000000      # Stummschalten
    KEY_SUBTITLE             0xE80200000000
    KEY_CHANNEL              0xFD0200000000
    KEY_FAVORITES            0xB10200000000
    KEY_MODE                 0x000000000000
    KEY_TIME                 0x000000000000
    KEY_PVR                  0x000000000000
    KEY_SETUP                0x000000000000
    KEY_TEXT                 0xBC0200000000
    KEY_PROG1                0xBF0200000000
    KEY_PROG2                0x8A0200000000
    KEY_PROG3                0x000000000000
    KEY_PROG4                0x9D0200000000
    KEY_AUDIO                0x000000000000
    KEY_VIDEO                0x000000000000
    KEY_IMAGES               0x000000000000      # User-Taste, z.B. für Keymakros
    KEY_FN                   0x000000000000
    KEY_SCREEN               0x000000000000

  end codes

end remote

15
x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
« on: December 03, 2017, 18:16:18 »
Quote from: clausmuus on December 03, 2017, 18:12:52
OK, dann geht mode2 mit dem atric usb also nicht und ich muss den Fehler woanders suchen, z.B. bei einer eventuell nicht passenden lircd.conf.

Nur wie überprüft man beim atric usb ob überhaupt Signale ankommen, wenn man noch keine lircd.conf hat?

Warum geht dann bei mir "irw" ? wenn ich /var/run/lirc/lircd-ttyACM0 angebe?