Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - kalli

1
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 19, 2007, 09:20:43 »
Nun konnte ich meine Tests endlich weiterführen.
Obwohl dmesg etc. vernünftige Ausgaben liefern
hat es mit der o.g. Firmware nicht geklappt.

Der korrekte Weg ist natürlich (wo sonst) in den
Kernel Dokumentationen beschrieben.

/usr/src/linux-2.6.x/Documentation/dvb/opera-firmware.txt

Code: [Select]
To extract the firmware for the Opera DVB-S1 USB-Box
you need to copy the files:

2830SCap2.sys
2830SLoad2.sys

from the windriver disk into this directory.

Then run

./get_dvb_firware opera1

and after that you have 2 files:

dvb-usb-opera-01.fw
dvb-usb-opera1-fpga-01.fw

in here.

Copy them into /lib/firmware/ .

After that the driver can load the firmware
(if you have enabled firmware loading
in kernel config and have hotplug running).


Marco Gittler <g.marco@freenet.de>

Nachdem ich also die zwei .sys Dateien von meiner
Opera CD benutzt habe funktionierte alles sofort.

@clausmuus: Du kannst die falschen firmware Dateien wieder löschen.

Gruss
Kalli

2
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 12, 2007, 15:07:57 »
Sicher bin ich mir nicht.


Aber in der Anleitung steht:

You only need three of them. Take a look at the code, which one you need. The code is in the usb-drivers directory and called something like opera.

Aber ich werds ohne mal testen.


Gruß
Kalli

3
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 11, 2007, 21:03:02 »
OK,  getestet.

Zuerst kam:
dmesg:
=======
opera: start downloading fpga firmware dvb-usb-opera1-fpga-01.fw
opera: did not find the firmware file. (dvb-usb-opera1-fpga-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems.
opera1: probe of 1-3:1.0 failed with error -22

Dann habe ich die Datei dvb-usb-opera1-fpga.fw in dvb-usb-opera1-fpga-01.fw umbenannt.
Außerdem fehlte auch noch opera1-2.fw

/etc/init.d/dvb-usb stop
/etc/init.d/dvb-usb start

und schon kam bei dmesg folgendes:

opera: start downloading fpga firmware dvb-usb-opera1-fpga-01.fw
dvb-usb: found a 'Opera1 DVB-S USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Opera1 DVB-S USB2.0)
dvb-usb: MAC address: 00:e0:4f:00:1b:78
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: IR-receiver inside an USB DVB receiver as /class/input/input3
dvb-usb: schedule remote query interval to 200 msecs.
dvb-usb: Opera1 DVB-S USB2.0 successfully initialized and connected.
usbcore: registered new interface driver opera1


Also stimmte die Anleitung unter http://www.informatik.uni-leipzig.de/bsv/H...Hlawit/dvb.html nicht ganz.


@clausmuus: Kannst Du den Dateinamen dvb-usb-opera1-fpga.fw ebenfalls im dvb-usb Packet ändern und die fehlende opera1-2.fw
hinzufügen.

Gruß
Kalli






 


 

4
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 11, 2007, 10:52:24 »
Super Danke!

Reicht es, wenn ich das dvb-usb addon aktualisiere oder muss ich eine Neuinstallation
machen?


Würde es heute abend dann testen.

Gruß
Kalli

5
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 10, 2007, 12:43:40 »

Die Treiber Module heissen:

dvb-usb.ko
dvb-usb-opera1.ko

Man benötigt zusätlich zum Treiber noch diese Firmware.
http://www.informatik.uni-leipzig.de/bsv/H...Hlawit/dvb.html

Gruß
Kalli

6
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 10, 2007, 09:26:09 »
Ist ein externer DVB-S USB Adapter, der seit Kernel 2.6.22 unterstützt wird.
http://www.vdr-wiki.de/wiki/index.php/Exte...B-S_Ger%C3%A4te.

Diese kernel config müsste genügen.

CONFIG_DVB_USB=m
CONFIG_DVB_USB_OPERA1=m

Gruß
Kalli

7
Entwicklung [ Development ] / Opera1 Dvb-s Usb Adapter
« on: December 08, 2007, 15:11:37 »
Hallo,

könnt Ihr diesen Adapter ebenfalls unterstützen.
Läuft unter Linux sehr gut und wird vom
Standard Kernel unterstützt.

Danke
Kalli

8
Bugs & Test Berichte / Hauppauge Wintv-nova-se2
« on: November 21, 2007, 15:15:45 »
Hi,

ich habe mir die Karte mal genauer angeschaut.
Der auf dem Frontend Chip steht CX24123-112.

Von daher wird der richtige Treiber aufgerufen.

Gruß
Kalli

9
Bugs & Test Berichte / Hauppauge Wintv Nexus-s Rev2.3
« on: November 21, 2007, 14:25:48 »
Ok, hier gehts weiter:

http://forum.minidvblinux.uni-klu.ac.at/in...=ST&f=22&t=3634

10
Bugs & Test Berichte / Hauppauge Wintv-nova-se2
« on: November 21, 2007, 13:55:15 »
2. Versuch
==========
Nun probiere ich weiter:

1. /etc/init.d/dvb stop


Ergebnis:

/var/log/messages
=============
Nov 21 13:46:38 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
Nov 21 13:46:38 (none) user.warn kernel: saa7146: unregister extension 'budget_av'.
Nov 21 13:46:39 (none) user.warn kernel: saa7146: unregister extension 'budget dvb'.

lsmod
=====
Module                  Size  Used by    Not tainted
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
i2c_core               14336  1 cx24123

dmesg
=====
b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_patch dvb'.
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.

=========================================

2. modpobe cx88-dvb

Ergebnis:

Ausgabe
======
insmod: cannot insert '/lib/modules/2.6.22.6/kernel/drivers/media/video/cx88/cx88-dvb.ko': No such device (-1): No such device
modprobe: failed to load module cx88_dvb



/var/log/messages
=============
Nov 21 13:51:37 (none) user.info kernel: Linux video capture interface: v2.00
Nov 21 13:51:37 (none) user.info kernel: cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
Nov 21 13:51:37 (none) user.info kernel: cx88[0]: TV tuner type 4, Radio tuner type -1
Nov 21 13:51:37 (none) user.info kernel: input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input3
Nov 21 13:51:37 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 21 13:51:37 (none) user.info kernel: cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
Nov 21 13:51:37 (none) user.info kernel: cx88[0]/2: cx2388x based DVB/ATSC card


lsmod
=====
Module                  Size  Used by    Not tainted
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
ir_common              24708  1 cx88xx
i2c_algo_bit            5124  2 cx88_vp3054_i2c,cx88xx
tveeprom               13072  1 cx88xx
videodev               23552  1 cx88xx
v4l2_common            12416  2 cx88xx,videodev
v4l1_compat            12292  1 videodev
btcx_risc               3720  2 cx8802,cx88xx
videobuf_dvb            5380  0
dvb_core               53404  1 videobuf_dvb
videobuf_dma_sg         8580  3 cx8802,cx88xx,videobuf_dvb
videobuf_core          11012  4 cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
i2c_core               14336  6 cx88_vp3054_i2c,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,cx24123



dmesg
=====
Linux video capture interface: v2.00
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92500, rev B1B1, serial# 567043
tveeprom 0-0050: MAC address is 00-0D-FE-08-A7-03
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input3
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]
cx88[0]/2: cx2388x based DVB/ATSC card
cx24123_readreg: reg=0x0 (error=-121)
Version != d1 or e1
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -1)
cx88[0]/2: cx8802 probe failed, err = -1



Der 2. Versuch kommt dem Ziel schon näher. Reicht aber noch nicht.
So sollte es aussehen: http://www.linuxtv.org/wiki/index.php/Haup..._WinTV-NOVA-SE2


Gruß
Kalli


 

11
Bugs & Test Berichte / Hauppauge Wintv-nova-se2
« on: November 21, 2007, 13:43:01 »
Hallo,

Folgender Testbericht zur MLD-1.9.0_default-259_38.iso
DVB-S Karte:  Hauppauge WinTV-NOVA-SE2

Nach der sonst erfolgreichen Installation erhalte ich folgendes
nach dem boot:


/var/log/messages
==============
Nov 21 13:18:01 (none) user.warn kernel: saa7146: register extension 'budget_ci
Nov 21 13:18:01 (none) user.warn kernel: saa7146: register extension 'budget_pat
Nov 21 13:18:01 (none) user.info kernel: bttv: driver version 0.9.17 loaded
Nov 21 13:18:01 (none) user.info kernel: bttv: using 8 buffers with 2080k (520 p
Nov 21 13:18:02 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: Hauppauge model 92500,
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: MAC address is 00-0D-F
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: tuner model is Conexan
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: TV standards ATSC/DVB
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: audio processor is CX8
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: decoder processor is C
Nov 21 13:18:02 (none) user.info kernel: tveeprom 0-0050: has no radio, has no I
Nov 21 13:18:02 (none) user.warn kernel: cx88[0]: warning: unknown hauppauge mod
Nov 21 13:18:02 (none) user.info kernel: cx88[0]: hauppauge eeprom: model=92500
Nov 21 13:18:02 (none) user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Nov 21 13:18:02 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.
Nov 21 13:18:02 (none) user.info kernel: cx88/2: registering cx8802 driver, type
Nov 21 13:18:02 (none) user.info kernel: cx88[0]/2: subsystem: 0070:9200, board:
Nov 21 13:18:02 (none) user.warn kernel: cx24123_readreg: reg=0x0 (error=-121)
Nov 21 13:18:02 (none) user.warn kernel: Version != d1 or e1
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: frontend initialization faile
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: dvb_register failed (err = -1
Nov 21 13:18:02 (none) user.err kernel: cx88[0]/2: cx8802 probe failed, err = -1


lsmod
====
Module                  Size  Used by    Not tainted
via_rhine              18824  0
mii                     4096  1 via_rhine
cx24123                 9736  0
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
videobuf_dvb            5380  0
dvb_bt8xx              12548  0
bt878                   8552  1 dvb_bt8xx
bttv                  143572  2 dvb_bt8xx,bt878
compat_ioctl32          1664  1 bttv
i2c_algo_bit            5124  3 cx88_vp3054_i2c,cx88xx,bttv
btcx_risc               3720  3 cx8802,cx88xx,bttv
tveeprom               13072  2 cx88xx,bttv
b2c2_flexcop_pci        6168  0
b2c2_flexcop           17164  1 b2c2_flexcop_pci
budget_patch            7936  0
budget_av              14720  0
budget_ci              14724  0
ir_common              24708  3 cx88xx,bttv,budget_ci
budget                  9604  0
budget_core             7684  4 budget_patch,budget_av,budget_ci,budget
dvb_ttpci              78024  0
dvb_core               53404  9 videobuf_dvb,dvb_bt8xx,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci
firmware_class          7168  6 dvb_bt8xx,bttv,b2c2_flexcop,budget_av,budget_ci,dvb_ttpci
saa7146_vv             37504  2 budget_av,dvb_ttpci
saa7146                13320  7 budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
videobuf_dma_sg         8580  5 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv
videobuf_core          11012  6 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv,videobuf_dma_sg
videodev               23552  3 cx88xx,bttv,saa7146_vv
v4l2_common            12416  4 cx88xx,bttv,saa7146_vv,videodev
v4l1_compat            12292  3 bttv,saa7146_vv,videodev
ttpci_eeprom            2688  2 budget_core,dvb_ttpci
i2c_core               14336  16 cx24123,cx88_vp3054_i2c,cx88xx,dvb_bt8xx,bttv,i2c_algo_bit,tveeprom,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,v4l2_common,ttpci_eeprom




dmesg
=====
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_patch dvb'.
b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92500, rev B1B1, serial# 567043
tveeprom 0-0050: MAC address is 00-0D-FE-08-A7-03
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input2
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0c.2 to 64
cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xee000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]
cx88[0]/2: cx2388x based DVB/ATSC card
cx24123_readreg: reg=0x0 (error=-121)
Version != d1 or e1
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -1)
cx88[0]/2: cx8802 probe failed, err = -1


Gruß
Kalli
 

12
Bugs & Test Berichte / Hauppauge Wintv Nexus-s Rev2.3
« on: November 20, 2007, 23:22:32 »
Hallo,

Neuer Kernel, neues dvb addon, aber die  
Haupauge WinTV Nova SE2 geht leider
immer nocht nicht.

Habe nun mal ne Xubuntu 7.10 installiert,
die DVB Karte wird dort sofort erkannt.
dvb-utils, Kaffeine, mplayer funktionieren
auf Anhieb. Der default Kernel auf der Xubuntu hat
die Version 2.6.22-14.

Woran mag das liegen? Ist in dem MLD Kernel
SMT-7020S Code der ggf. stört?

Gruß
Kalli

13
Bugs & Test Berichte / Smt-7020s Und Ide Flash Module
« on: November 14, 2007, 09:46:39 »
Das Flash IDE Drive bootet mit der MLD auf auf einer S100.
Die Tests mit der SMT konnte ich leider noch nicht durchführen,
da die stetig im Einsatz ist. (Immer noch mit Zenslack 1rc35 :) ).

Wird sie S100 als Streaming Client eigentlich unterstützt?

Gruß Kalli

14
Bugs & Test Berichte / Hauppauge Wintv Nexus-s Rev2.3
« on: November 13, 2007, 10:59:36 »
Habe jetzt /etc/init.d/dvb stop ausgeführt.
Danach modpobe cx88_dvb

Als Ergebnis kommt diese Ausgabe:
=========================
insmod: cannot insert '/lib/modules/2.6.22.6/kernel/drivers/media/video/video-buf.ko': Invalid module format (-1): Exec format error
insmod: cannot insert '/lib/modules/2.6.22.6/kernel/drivers/media/video/cx88/cx88-dvb.ko': No such device (-1): No such device
modprobe: failed to load module cx88_dvb


lsmod liefert nun:
=============
root:lsmod
Module                  Size  Used by    Not tainted
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
ir_common              24836  1 cx88xx
i2c_algo_bit            5124  2 cx88_vp3054_i2c,cx88xx
tveeprom               13072  1 cx88xx
videodev               23552  1 cx88xx
v4l2_common            12416  2 cx88xx,videodev
v4l1_compat            12292  1 videodev
btcx_risc               3720  2 cx8802,cx88xx
videobuf_dvb            5380  0
dvb_core               53532  1 videobuf_dvb
videobuf_dma_sg         8580  3 cx8802,cx88xx,videobuf_dvb
videobuf_core          10756  4 cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg
i2c_core               14336  5 cx88_vp3054_i2c,cx88xx,i2c_algo_bit,tveeprom,v4l2_common


Das kommt dem lsmod wie im Wiki http://www.linuxtv.org/wiki/index.php/Haup..._WinTV-NOVA-SE2
beschrieben schon näher, cx88_dvb fehlt definitiv.

Gruß
Kalli
 

15
Bugs & Test Berichte / Hauppauge Wintv Nexus-s Rev2.3
« on: November 13, 2007, 10:52:45 »
Hallo Clausmuus!

Der Vollständigkeit wegen:

Karte: Hauppauge WinTV-NOVA-SE2

Hier die Zeilen aus /var/log/messages:
===========================
Nov 13 10:26:00 (none) user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Nov 13 10:26:00 (none) user.warn kernel: saa7146: register extension 'budget_av'.
Nov 13 10:26:00 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Nov 13 10:26:00 (none) user.info kernel: bttv: driver version 0.9.17 loaded
Nov 13 10:26:00 (none) user.info kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Nov 13 10:26:00 (none) user.err kernel: video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
Nov 13 10:26:01 (none) user.info kernel: cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
Nov 13 10:26:01 (none) user.info kernel: cx88[0]: TV tuner type 4, Radio tuner type -1
Nov 13 10:26:01 (none) user.info kernel: input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input0
Nov 13 10:26:01 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
Nov 13 10:26:01 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Nov 13 10:26:01 (none) user.debug kernel: PCI: setting IRQ 10 as level-triggered
Nov 13 10:26:01 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 13 10:26:01 (none) user.debug kernel: PCI: Setting latency timer of device 0000:00:0c.2 to 64
Nov 13 10:26:01 (none) user.info kernel: cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xec000000
Nov 13 10:26:01 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Nov 13 10:26:01 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Nov 13 10:26:01 (none) user.info kernel: cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]


Hier die dmesg Ausgabe:
==================
Linux video capture interface: v2.00
video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_patch dvb'.
b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92500, rev B1B1, serial# 567043
tveeprom 0-0050: MAC address is 00-0D-FE-08-A7-03
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input0
cx88[0]/2: cx2388x 8802 Driver Manager

.....

cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 10, latency: 64, mmio: 0xec000000
video_buf: exports duplicate symbol videobuf_vmalloc_to_sg (owned by videobuf_dma_sg)
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: Unable to find symbol cx24123_attach()
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -1)
cx88[0]/2: cx8802 probe failed, err = -1



Und das sagt lsmod:
==============
Module                  Size  Used by    Not tainted
via_rhine              18824  0
mii                     4096  1 via_rhine
cx88_vp3054_i2c         2688  0
cx8802                 13316  0
cx88xx                 50728  1 cx8802
videobuf_dvb            5380  0
dvb_bt8xx              12548  0
bt878                   8552  1 dvb_bt8xx
bttv                  143700  2 dvb_bt8xx,bt878
compat_ioctl32          1664  1 bttv
i2c_algo_bit            5124  3 cx88_vp3054_i2c,cx88xx,bttv
btcx_risc               3720  3 cx8802,cx88xx,bttv
tveeprom               13072  2 cx88xx,bttv
b2c2_flexcop_pci        7448  0
b2c2_flexcop           19084  1 b2c2_flexcop_pci
budget_patch            7936  0
budget_av              14720  0
budget_ci              14724  0
ir_common              24836  3 cx88xx,bttv,budget_ci
budget                  9604  0
budget_core             7684  4 budget_patch,budget_av,budget_ci,budget
dvb_ttpci              78024  0
dvb_core               53532  9 videobuf_dvb,dvb_bt8xx,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci
firmware_class          7168  6 dvb_bt8xx,bttv,b2c2_flexcop,budget_av,budget_ci,dvb_ttpci
saa7146_vv             37504  2 budget_av,dvb_ttpci
saa7146                13320  7 budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
videobuf_dma_sg         8580  5 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv
videobuf_core          10756  6 cx8802,cx88xx,videobuf_dvb,bttv,saa7146_vv,videobuf_dma_sg
videodev               23552  3 cx88xx,bttv,saa7146_vv
v4l2_common            12416  4 cx88xx,bttv,saa7146_vv,videodev
v4l1_compat            12292  3 bttv,saa7146_vv,videodev
ttpci_eeprom            2688  2 budget_core,dvb_ttpci
i2c_core               14336  15 cx88_vp3054_i2c,cx88xx,dvb_bt8xx,bttv,i2c_algo_bit,tveeprom,b2c2_flexcop,budget_patch,budget_av,budget_ci,budget,budget_core,dvb_ttpci,v4l2_common,ttpci_eeprom