Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - agima

1
Entwicklung [ Development ] / netinstall-Version
« on: August 13, 2014, 22:18:07 »
Leute was macht ihr da !! ::) :'(

Das ist schon das dritte mal passiert in den 7 Tagen wo mein MLD läuft.

Soryy !

Stefan

2
Allgemeines [ General ] / Cine C/T/T2 V7 geht nicht
« on: August 13, 2014, 17:18:40 »
 :P :) :) :) :)

Geht.

Stefan

3
Allgemeines [ General ] / Cine C/T/T2 V7 geht nicht
« on: August 12, 2014, 17:27:38 »
Warscheinlich ist das wieder nee neue Version der Karte

Die Cine S2 gehen


Aug 12 17:19:26 (MLD) user.info kernel: e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-006
Aug 12 17:19:26 (MLD) user.info kernel: Port 0 (TAB 1): DUAL DVB-CT2 CXD2837
Aug 12 17:19:26 (MLD) user.info kernel: Port 1 (TAB 2): NO MODULE
Aug 12 17:19:26 (MLD) user.info kernel: Port 2 (TAB 3): NO MODULE
Aug 12 17:19:26 (MLD) user.info kernel: Port 3 (TAB 4): NO MODULE
Aug 12 17:19:26 (MLD) user.info kernel: 0 netstream channels
Aug 12 17:19:26 (MLD) user.info kernel: DVB: registering new adapter (DDBridge)
Aug 12 17:19:26 (MLD) user.info kernel: DVB: registering new adapter (DDBridge)
Aug 12 17:19:26 (MLD) user.err kernel: DVB: Unable to find symbol cxd2843_attach()
Aug 12 17:19:26 (MLD) user.err kernel: No cxd2837/38/43 found!
Aug 12 17:19:26 (MLD) user.err kernel: port_attach on port 0 failed
Aug 12 17:19:26 (MLD) user.err kernel: fail3
Aug 12 17:19:26 (MLD) user.err kernel: fail2
Aug 12 17:19:26 (MLD) user.err kernel: fail1
Aug 12 17:19:26 (MLD) user.err kernel: fail0
Aug 12 17:19:26 (MLD) user.err kernel: fail
Aug 12 17:19:26 (MLD) user.warn kernel: ddbridge: probe of 0000:07:00.0 failed with error -1
Aug 12 17:19:29 (MLD) user.notice kernel: XFS (sda2): Mounting V4 Filesystem
Aug 12 17:19:29 (MLD) user.notice kernel: XFS (sda2): Starting recovery (logdev: internal)

4
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 11:52:14 »
Hallo,

irgendwie noch nicht.

Ich werde die ganzen Karten gleich morgen zur Post bringen.

Dann könnt ihr das Vorort testen.

Bitte Dafür deine Adresse per PN.



Aug 11 11:48:45 (MLD) user.notice kernel: XFS (sda2): Ending recovery (logdev: internal)
Aug 11 11:48:55 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:48:55 (MLD) user.err kernel: i2c i2c-7: cx24117_load_firmware() Error running FW.
Aug 11 11:48:55 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: Writing firmware failed
Aug 11 11:48:55 (MLD) user.info kernel: i2c i2c-7: cx24117_firmware_ondemand: Firmware upload failed
Aug 11 11:48:56 (MLD) user.err vdr: [1135] [discovery] UDP broadcast send failed (discovery)
Aug 11 11:48:56 (MLD) user.err vdr: [1135] [discovery]    (ERROR (tools/vdrdiscovery.c,97): Network is unreachable)
Aug 11 11:48:56 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:48:57 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,737): Input/output error
Aug 11 11:48:57 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:48:58 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:48:59 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,756): Input/output error
Aug 11 11:48:59 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:00 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 11 11:49:00 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,758): Input/output error
Aug 11 11:49:00 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:01 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:02 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,762): Input/output error
Aug 11 11:49:02 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:02 (MLD) user.info kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Aug 11 11:49:02 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 11 11:49:03 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,758): Input/output error
Aug 11 11:49:03 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:04 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:05 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,793): Input/output error
Aug 11 11:49:05 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:49:06 (MLD) user.err vdr: [1099] ERROR (dvbdevice.c,794): Input/output error
Aug 11 11:49:06 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding

5
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 11:39:28 »
Der MLD findet kein Update.

Die Karte TBS S2 Karte bekommst du auch. Die hab ich vergessen.

Schick mir mal per PN die Adresse wo das alles hin soll.

6
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 11:22:46 »
 :) :)

Hab die in Jahren gesammelt


Stefan

7
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 11:17:15 »
4:47 (MLD) user.notice kernel: sd 8:0:0:0: Attached scsi generic sg2 type 0
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:0: [sdb] Attached SCSI removable disk
Aug 11 11:14:47 (MLD) user.notice kernel: scsi 8:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:1: Attached scsi generic sg3 type 0
Aug 11 11:14:47 (MLD) user.notice kernel: scsi 8:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:2: Attached scsi generic sg4 type 0
Aug 11 11:14:47 (MLD) user.notice kernel: scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:3: Attached scsi generic sg5 type 0
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:1: [sdc] Attached SCSI removable disk
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:2: [sdd] Attached SCSI removable disk
Aug 11 11:14:47 (MLD) user.notice kernel: sd 8:0:0:3: [sde] Attached SCSI removable disk
Aug 11 11:14:47 (MLD) user.info kernel: fbcon: inteldrmfb (fb0) is primary device
Aug 11 11:14:47 (MLD) user.info kernel: Console: switching to colour frame buffer device 240x67
Aug 11 11:14:47 (MLD) user.info kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Aug 11 11:14:47 (MLD) user.info kernel: i915 0000:00:02.0: registered panic notifier
Aug 11 11:14:47 (MLD) user.info kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Aug 11 11:14:47 (MLD) user.info kernel: acpi device:62: registered as cooling_device4
Aug 11 11:14:47 (MLD) user.info kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
Aug 11 11:14:47 (MLD) user.info kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug 11 11:14:47 (MLD) user.debug kernel: snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
Aug 11 11:14:48 (MLD) user.info kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Aug 11 11:14:49 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 11:14:49 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 11:14:49 (MLD) user.info kernel: cx24117 7-0055: creating new instance
Aug 11 11:14:49 (MLD) user.info kernel: i2c i2c-7: cx24117: Attaching frontend 0
Aug 11 11:14:49 (MLD) user.info kernel: DVB: registering new adapter (cx23885[0])
Aug 11 11:14:49 (MLD) user.info kernel: cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Conexant CX24117/CX24132)...
Aug 11 11:14:49 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 11:14:49 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 11:14:49 (MLD) user.info kernel: cx24117 7-0055: attaching existing instance
Aug 11 11:14:49 (MLD) user.info kernel: i2c i2c-7: cx24117: Attaching frontend 1
Aug 11 11:14:49 (MLD) user.info kernel: DVB: registering new adapter (cx23885[0])
Aug 11 11:14:49 (MLD) user.info kernel: cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Conexant CX24117/CX24132)...
Aug 11 11:14:49 (MLD) user.info kernel: cx23885_dev_checkrevision() Hardware revision = 0xa5
Aug 11 11:14:49 (MLD) user.info kernel: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf0400000
Aug 11 11:14:52 (MLD) user.notice kernel: XFS (sda2): Mounting V4 Filesystem
Aug 11 11:14:52 (MLD) user.info kernel: XFS (sda2): Ending clean mount
Aug 11 11:15:03 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:03 (MLD) user.err kernel: i2c i2c-7: cx24117_load_firmware() Error running FW.
Aug 11 11:15:03 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: Writing firmware failed
Aug 11 11:15:03 (MLD) user.info kernel: i2c i2c-7: cx24117_firmware_ondemand: Firmware upload failed
Aug 11 11:15:03 (MLD) user.err vdr: [1140] [discovery] UDP broadcast send failed (discovery)
Aug 11 11:15:03 (MLD) user.err vdr: [1140] [discovery]    (ERROR (tools/vdrdiscovery.c,97): Network is unreachable)
Aug 11 11:15:03 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:04 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,737): Input/output error
Aug 11 11:15:04 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:05 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:06 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,756): Input/output error
Aug 11 11:15:06 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:07 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 11 11:15:07 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,758): Input/output error
Aug 11 11:15:07 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:08 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:09 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,762): Input/output error
Aug 11 11:15:09 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:09 (MLD) user.info kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Aug 11 11:15:09 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 11 11:15:10 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,758): Input/output error
Aug 11 11:15:10 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:11 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:12 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,793): Input/output error
Aug 11 11:15:12 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:13 (MLD) user.err vdr: [1101] ERROR (dvbdevice.c,794): Input/output error
Aug 11 11:15:13 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:13 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding
Aug 11 11:15:14 (MLD) user.warn kernel: i2c i2c-7: cx24117_cmd_execute_nolock() Firmware not responding

8
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 11:13:30 »
Hallo,

werde ich machen wenn die neuene Karten da sind. :)

Ich hab aber einen Menge Karten

2x Tevii S660 USB (bei einem fehlt das Ntzeteil 7,5 v 2A)
2x Mystiquee S2 Doppellkarten
2x DvB-Sky T982 Doppelkarten
1x TT 4100 PCie

Stefan

9
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 10:45:28 »
Hallo,

Irgendwas fehlt da noch irgeneine Firmware oder so.

Ich meint ob du die MLD DVB Treiber kompilierts oder ob das noch andrer machen ?
Frage deshalb weil ich doch diese ganzen Karten über habe und ich würde dir die zukommen lassen damit man was Vorort hat um zu testen.

Ich bekomme die Cine C ubnd S2 Karten ja morgen dann sind die über.




Aug 11 10:36:44 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 10:36:44 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 10:36:44 (MLD) user.info kernel: cx24117 7-0055: creating new instance
Aug 11 10:36:44 (MLD) user.info kernel: i2c i2c-7: cx24117: Attaching frontend 0
Aug 11 10:36:44 (MLD) user.info kernel: DVB: registering new adapter (cx23885[0])
Aug 11 10:36:44 (MLD) user.info kernel: cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Conexant CX24117/CX24132)...
Aug 11 10:36:44 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 10:36:44 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 10:36:44 (MLD) user.info kernel: cx24117 7-0055: attaching existing instance
Aug 11 10:36:44 (MLD) user.info kernel: i2c i2c-7: cx24117: Attaching frontend 1
Aug 11 10:36:44 (MLD) user.info kernel: DVB: registering new adapter (cx23885[0])
Aug 11 10:36:44 (MLD) user.info kernel: cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Conexant CX24117/CX24132)...
Aug 11 10:36:44 (MLD) user.info kernel: cx23885_dev_checkrevision() Hardware revision = 0xa5
Aug 11 10:36:44 (MLD) user.info kernel: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf0400000
Aug 11 10:36:47 (MLD) user.notice kernel: XFS (sda2): Mounting V4 Filesystem
Aug 11 10:36:47 (MLD) user.info kernel: XFS (sda2): Ending clean mount
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Direct firmware load failed with error -2
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Falling back to user helper
Aug 11 10:36:51 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: No firmware uploaded (timeout or file not found?)
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Direct firmware load failed with error -2
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Falling back to user helper
Aug 11 10:36:51 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: No firmware uploaded (timeout or file not found?)
Aug 11 10:36:51 (MLD) user.err vdr: [919] [discovery] UDP broadcast send failed (discovery)
Aug 11 10:36:51 (MLD) user.err vdr: [919] [discovery]    (ERROR (tools/vdrdiscovery.c,97): Network is unreachable)
Aug 11 10:36:51 (MLD) user.err vdr: [913] ERROR (dvbdevice.c,737): Cannot allocate memory
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Direct firmware load failed with error -2
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Falling back to user helper
Aug 11 10:36:51 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: No firmware uploaded (timeout or file not found?)
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Direct firmware load failed with error -2
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Falling back to user helper
Aug 11 10:36:51 (MLD) user.err vdr: [913] ERROR (dvbdevice.c,756): Cannot allocate memory
Aug 11 10:36:51 (MLD) user.err kernel: i2c i2c-7: cx24117_firmware_ondemand: No firmware uploaded (timeout or file not found?)
Aug 11 10:36:51 (MLD) user.warn kernel: cx23885 0000:02:00.0: Direct firmware
load failed with error -2

10
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 10:25:43 »
Sag wenn das update durch ist.

Machst du die ganzen DVB Treiber für dem mld ?


Stefan

11
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 10:03:38 »
ja mit dem normalen DVB Treiber

12
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 11, 2014, 00:31:21 »
ug 11 00:28:14 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 00:28:14 (MLD) user.err kernel: DVB: Unable to find symbol cx24117_attach()
Aug 11 00:28:14 (MLD) user.err kernel: cx23885[0]: frontend initialization failed
Aug 11 00:28:14 (MLD) user.err kernel: cx23885_dvb_register() dvb_register failed err = -22
Aug 11 00:28:14 (MLD) user.err kernel: cx23885_dev_setup() Failed to register dvb adapters on VID_B
Aug 11 00:28:14 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 00:28:14 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 00:28:14 (MLD) user.err kernel: DVB: Unable to find symbol cx24117_attach()
Aug 11 00:28:14 (MLD) user.err kernel: cx23885[0]: frontend initialization failed

cx23885 driver version 0.0.3 loaded
Aug 11 00:28:12 (MLD) user.info kernel: CORE cx23885[0]: subsystem: 6981:8888, board: TurboSight TBS 6981 [card=40,autodetected]
Aug 11 00:28:14 (MLD) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Aug 11 00:28:14 (MLD) user.info kernel: cx23885[0]: cx23885 based dvb card
Aug 11 00:28:14 (MLD) user.err kernel: DVB: Unable to find symbol cx24117_attach()
Aug 11 00:28:14 (MLD) user.err kernel: cx23885[0]: frontend initialization failed
Aug 11 00:28:14 (MLD) user.err kernel: cx23885_dvb_register() dvb_register failed err = -22
Aug 11 00:28:14 (MLD) user.err kernel: cx23885_dvb_register() dvb_register failed err = -22
Aug 11 00:28:14 (MLD) user.err kernel: cx23885_dev_setup() Failed to register dvb on VID_C
Aug 11 00:28:14 (MLD) user.info kernel: cx23885_dev_checkrevision() Hardware revision = 0xa5
Aug 11 00:28:14 (MLD) user.info kernel: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf0400000


 Wenn ich dagegen den DVB-TBS Treiber benutze findet er garnichts

13
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 10, 2014, 20:55:18 »
hallo TBS6981

14
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 10, 2014, 17:53:34 »
Hab mal eine TBS Doppelkarte S2 ausprobiert. Die geht auch nicht. Unter MLD3.x wird die Krate nicht gefunden / Unter MLD 32BIT 4.01 geht die Karte nicht Fehler beim Frontend Init. Das selbe mit 64. bit.


Keine AHnung woran das liegt.


die Cine Karten sind wie gesagt unterwegs.
Stefan

15
Allgemeines [ General ] / MLD 4.0.1 X64 Dvb Sky T982 gehen nicht. Fehler beim laden der Module
« on: August 10, 2014, 14:24:39 »
Hallo,

lass es sein mit dem DVB-Sky-Treiber:-)

ist noch alte Hardware. Hätte ich das gewusst mit dem mist hätte ich gleich vernunftige Karten bestellt.

Also Tipp an andrere ->Lieber vernünftige Karten kaufen !!
Ich werde mir eine DD Cine C dazukaufen.

Der ganze Müll ann Karten den ich hab !

Stefan