1

Raspberry PI / Raspberry Pi

« on: June 10, 2012, 13:19:36 »

Irgendwie fehlt der Ordner /data/tv/tv0. Magst Du mal checken was mit dem ist? Das sollte eigentlich nen Link nach /mnt/data/tv sein.

/mnt/data/tv existierte nicht, habe ich jetzt einfach mal angelegt.

Magst Du mal nen "pcimodules" aufrufen. Gibt's dann den lspci Fehler? Steht in der /usr/bin/pcimodules nen "lspci -m 2>/dev/null"?

MLD> pcimodules
MLD>

MLD> vi /usr/bin/pcimodules
#!/bin/sh

lspci -m 2>/dev/null | sed 's/S+ S+ S+ "(S+)" "(S+)" "(S+)" "(S+)"/1 2 3 4/' | while read vendor device subvendor subdevice; do
        grep -h "^[^ ]+ +(0x0000$vendor|0xffffffff) (0x0000$device|0xffffffff) (0x0000$subvendor|0xffffffff) (0x0000$subdevice|0xffffffff) " /lib/modules/$(uname -r)/modules.pcimap.${1-*} 2>/de
done | sort -u

MLD> lspci -m
lspci: /sys/bus/pci/devices: No such file or directory

 

2

Raspberry PI / Raspberry Pi

« on: June 10, 2012, 12:16:45 »

Claus, könntest du mir einen Test-Kernel mit dem anhängenden Patch (ist für mein USB-Device) bauen? Bzw. ich bräuchte dann eigentlich nur das gepatchte Kernel-Modul "dvb-usb-dw2102.ko". Dann könnte ich mal konkreter weiter testen. Danke!

Eigentlich wollte ich ihn auch selber kompilieren, aber lustigerweise gibt der laufende Kernel scheinbar nicht die korrekte Config wieder:

MLD> uname -a
Linux MLD 3.1.9.118 #15 Fri Jun 8 17:09:31 CEST 2012 armv6l GNU/Linux
MLD> zcat /proc/config.gz | grep DVB

Demnäch wären gar nichts in Richtung DVB aktiviert.

Booten bis zum System selbst dauert ca. 10s, danach dann halt je nachdem wieviele Addons aktiviert sind bis ca. 1 Minute. Was den X-Server angeht muss ich nochmal genau schauen, da ich bislang der einfachhalt halber immer nur kurz per Composite draufgeschaut habe.

Was mir auch auffällt ist folgende Kernel-Message die sich immer wiederholt, was aber wohl an mir und dem Device bzw. dem Treiber liegt, also erstmal keine Panik :

[  836.669080] usbcore: deregistering interface driver dw2102
[  838.685908] WARNING: You are using an experimental version of the media stack.
[  838.685930]  As the driver is backported to an older kernel, it doesn't offer
[  838.685940]  enough quality for its usage in production.
[  838.685948]  Use it with care.
[  838.685954] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  838.685966]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
[  838.685979]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
[  838.685992]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
[  838.825036] WARNING: You are using an experimental version of the media stack.
[  838.825060]  As the driver is backported to an older kernel, it doesn't offer
[  838.825070]  enough quality for its usage in production.
[  838.825078]  Use it with care.
[  838.825084] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  838.825095]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
[  838.825108]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
[  838.825122]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
[  838.990471] usbcore: registered new interface driver dw2102
[  865.724179] usbcore: deregistering interface driver dw2102
[  867.752459] WARNING: You are using an experimental version of the media stack.
[  867.752481]  As the driver is backported to an older kernel, it doesn't offer
[  867.752492]  enough quality for its usage in production.
[  867.752500]  Use it with care.
[  867.752506] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  867.752517]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
[  867.752530]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
[  867.752543]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
[  867.791198] WARNING: You are using an experimental version of the media stack.
[  867.791224]  As the driver is backported to an older kernel, it doesn't offer
[  867.791234]  enough quality for its usage in production.
[  867.791242]  Use it with care.
[  867.791248] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  867.791259]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
[  867.791272]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
[  867.791286]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
[  867.890358] usbcore: registered new interface driver dw2102

Weiterhin ist die Load nach dem Boot im eigentlichen "Idle" Zustand sehr hoch:

Load average: 3.17 3.83 2.93 4/86 25724

Da muss ich mal schauen was das eigentlich verursacht...

3

Raspberry PI / Raspberry Pi

« on: June 09, 2012, 17:55:53 »

Okay gut, danke. Hier mal die kompletten Logfiles für die weiteren Fehler:

/var/log/sysinit

Thu Jan  1 00:00:03 UTC 1970

Copy initramfs to tmpfs: done
Preparing root as aufs: done
umount: can't umount /sys: Device or resource busy
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
Import system device: /dev/mmcblk0p1
  Turn on DMA:
failed
  Checking:
done
  Mounting:
done
Mounting vfat system directory:
done
Setting up logging: level 1
done
Setting up netware:
done
Importing addon: locales
done
Importing addon: dvb-usb
done
Importing addon: network
done
Importing addon: webserver
done
Importing addon: alsa
done
Importing addon: remote-autodetect
done
Importing addon: lib-x
done
Importing addon: xorg
done
Importing addon: vdr
done
Importing addon: addons
done
Importing addon: setup
done
Importing addon: lib-xine
done
Importing addon: xineliboutput
done
ldconfig: skipping /usr/lib/i386-linux-gnu/mesa/libGL.so.1: Too many levels of symbolic links
Import all further filesystems:
  Turn on DMA:
  Checking: done
  Mounting: done
locales:                 
Setting timezone:
hwclock: can't open '/dev/misc/rtc': No such file or directory
failed
Load keymap: de-latin1
done
xorg:                 
vdr:                 
xineliboutput:                 
alsa:                 
Loading sound driver:
lspci: /sys/bus/pci/devices: No such file or directorydone
alsactl: init:1743: No soundcards found...
aplay: device_list:235: no soundcards found...

Loading usb dvb driver
failed
Starting xorg
lspci: /sys/bus/pci/devices: No such file or directorydone
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:00:50 CET 1970
Starting VDRdone
network:                 
webserver:                 
addons:                 
setup:                 
Unloading usb dvb driverdone
Loading usb dvb driverfailed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:01:32 CET 1970
Unloading usb dvb driverdone
Loading usb dvb driver
Loading network driver
lspci: /sys/bus/pci/devices: No such file or directory
lspci: /sys/bus/pci/devices: No such file or directory
done
Starting DHCP-client
donefailed

lspci: /sys/bus/pci/devices: No such file or directory
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:02:22 CET 1970
Unloading usb dvb driverdone
Loading usb dvb driverfailed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:03:24 CET 1970
Unloading usb dvb driverdone
Loading usb dvb driverfailed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:04:09 CET 1970
webserver seems to hang! continue now...
Unloading usb dvb driver
done
Loading usb dvb driver
failed
Setting up setup menu:
done
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:04:57 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:05:45 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:06:19 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:06:57 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:07:36 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:08:28 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:09:05 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:09:39 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:10:18 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:11:19 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:12:26 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:13:10 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:14:21 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:15:28 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:16:32 CET 1970
Unloading usb dvb driver
done
Loading usb dvb driver
failed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:17:41 CET 1970
x exits at Do Jan  1 01:17:46 CET 1970
Unloading usb dvb driverdone
Loading usb dvb driverfailed
vdr: can't access video directory /data/tv/tv0
VDR exits at Do Jan  1 01:18:20 CET 1970
Unloading usb dvb driverdone
Loading usb dvb driverfailed

usw.

/var/log/messages

Jan  1 00:00:13 (none) syslog.info syslogd started: BusyBox v1.19.4
Jan  1 00:00:13 (none) user.warn kernel: [   16.097597] sed used greatest stack depth: 4668 bytes left
Jan  1 00:00:13 (none) user.warn kernel: [   16.297168] aufs test_add:262:mount[922]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 1001/1001/0755
Jan  1 00:00:14 (none) user.warn kernel: [   16.789901] aufs test_add:262:mount[935]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 1001/1001/0755
Jan  1 00:00:14 (none) user.warn kernel: [   17.175091] aufs test_add:262:mount[948]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 1001/1001/0755
Jan  1 00:00:15 (none) user.warn kernel: [   17.563981] aufs test_add:262:mount[961]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 1001/1001/0755
Jan  1 00:00:15 (none) user.warn kernel: [   17.956628] aufs test_add:262:mount[974]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 1001/1001/0755
Jan  1 00:00:15 (none) user.warn kernel: [   18.347158] aufs test_add:262:mount[986]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 1001/1001/0755
Jan  1 00:00:16 (none) user.warn kernel: [   18.742437] aufs test_add:262:mount[1000]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 1001/1001/0755
Jan  1 00:00:16 (none) user.warn kernel: [   19.203730] aufs test_add:262:mount[1017]: uid/gid/perm /var/spool/apm.mnt/xorg 0/0/0777, 1001/1001/0755
Jan  1 00:00:17 (none) user.warn kernel: [   19.666830] aufs test_add:262:mount[1034]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 1001/1001/0755
Jan  1 00:00:17 (none) user.warn kernel: [   20.124152] aufs test_add:262:mount[1050]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 1001/1001/0755
Jan  1 00:00:18 (none) user.warn kernel: [   20.581096] aufs test_add:262:mount[1066]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 1001/1001/0755
Jan  1 00:00:18 (none) user.warn kernel: [   21.048541] aufs test_add:262:mount[1087]: uid/gid/perm /var/spool/apm.mnt/lib-xine 0/0/0777, 1001/1001/0755
Jan  1 00:00:19 (none) user.warn kernel: [   21.824916] aufs test_add:262:mount[1104]: uid/gid/perm /var/spool/apm.mnt/xineliboutput 0/0/0777, 1001/1001/0755
Jan  1 00:00:24 (none) user.warn kernel: [   26.752075] depmod used greatest stack depth: 4524 bytes left
Jan  1 00:00:42 (none) user.err kernel: [   44.961732] WARNING: You are using an experimental version of the media stack.
Jan  1 00:00:42 (none) user.err kernel: [   44.961754]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:00:42 (none) user.err kernel: [   44.961764]  enough quality for its usage in production.
Jan  1 00:00:42 (none) user.err kernel: [   44.961773]  Use it with care.
Jan  1 00:00:42 (none) user.err kernel: [   44.961778] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:00:42 (none) user.err kernel: [   44.961790]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.err kernel: [   44.961803]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.err kernel: [   44.961816]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.err kernel: [   45.050688] WARNING: You are using an experimental version of the media stack.
Jan  1 00:00:42 (none) user.err kernel: [   45.050712]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:00:42 (none) user.err kernel: [   45.050722]  enough quality for its usage in production.
Jan  1 00:00:42 (none) user.err kernel: [   45.050730]  Use it with care.
Jan  1 00:00:42 (none) user.err kernel: [   45.050736] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:00:42 (none) user.err kernel: [   45.050747]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.err kernel: [   45.050760]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.err kernel: [   45.050773]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:00:42 (none) user.warn kernel: [   45.055798] dvb_usb: Unknown symbol i2c_del_adapter (err 0)
Jan  1 00:00:42 (none) user.warn kernel: [   45.055999] dvb_usb: Unknown symbol i2c_add_adapter (err 0)
Jan  1 01:00:49 (none) user.err vdr: [1668] ERROR (tools.c,366): /data/tv/tv0: No such file or directory
Jan  1 00:01:13 (none) user.err kernel: [   75.374174] WARNING: You are using an experimental version of the media stack.
Jan  1 00:01:13 (none) user.err kernel: [   75.374198]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:01:13 (none) user.err kernel: [   75.374209]  enough quality for its usage in production.
Jan  1 00:01:13 (none) user.err kernel: [   75.374217]  Use it with care.
Jan  1 00:01:13 (none) user.err kernel: [   75.374223] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:01:13 (none) user.err kernel: [   75.374234]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.err kernel: [   75.374248]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.err kernel: [   75.374261]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.err kernel: [   75.661008] WARNING: You are using an experimental version of the media stack.
Jan  1 00:01:13 (none) user.err kernel: [   75.661032]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:01:13 (none) user.err kernel: [   75.661042]  enough quality for its usage in production.
Jan  1 00:01:13 (none) user.err kernel: [   75.661051]  Use it with care.
Jan  1 00:01:13 (none) user.err kernel: [   75.661056] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:01:13 (none) user.err kernel: [   75.661068]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.err kernel: [   75.661081]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.err kernel: [   75.661094]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:13 (none) user.warn kernel: [   75.662966] dvb_usb: Unknown symbol i2c_del_adapter (err 0)
Jan  1 00:01:13 (none) user.warn kernel: [   75.663179] dvb_usb: Unknown symbol i2c_add_adapter (err 0)
Jan  1 00:01:24 (none) user.info kernel: [   87.179775] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Jan  1 01:01:32 (none) user.err vdr: [2680] ERROR (tools.c,366): /data/tv/tv0: No such file or directory
Jan  1 00:01:56 (none) user.err kernel: [  118.391793] WARNING: You are using an experimental version of the media stack.
Jan  1 00:01:56 (none) user.err kernel: [  118.391816]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:01:56 (none) user.err kernel: [  118.391826]  enough quality for its usage in production.
Jan  1 00:01:56 (none) user.err kernel: [  118.391834]  Use it with care.
Jan  1 00:01:56 (none) user.err kernel: [  118.391840] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:01:56 (none) user.err kernel: [  118.391852]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.err kernel: [  118.391865]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.err kernel: [  118.391878]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.err kernel: [  118.568747] WARNING: You are using an experimental version of the media stack.
Jan  1 00:01:56 (none) user.err kernel: [  118.568772]  As the driver is backported to an older kernel, it doesn't offer
Jan  1 00:01:56 (none) user.err kernel: [  118.568782]  enough quality for its usage in production.
Jan  1 00:01:56 (none) user.err kernel: [  118.568790]  Use it with care.
Jan  1 00:01:56 (none) user.err kernel: [  118.568796] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan  1 00:01:56 (none) user.err kernel: [  118.568807]  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.err kernel: [  118.568820]  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.err kernel: [  118.568833]  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jan  1 00:01:56 (none) user.warn kernel: [  118.570801] dvb_usb: Unknown symbol i2c_del_adapter (err 0)
Jan  1 00:01:56 (none) user.warn kernel: [  118.571128] dvb_usb: Unknown symbol i2c_add_adapter (err 0)
Jan  1 01:02:22 (none) user.err vdr: [3995] ERROR (tools.c,366): /data/tv/tv0: No such file or directory

...

4

Raspberry PI / Raspberry Pi

« on: June 09, 2012, 17:39:40 »

Ach und noch ein Fehler im Webinterface. Beim Unterpunkt Addons bekomme ich immer den folgenden Fehler:

wget: bad address 'www.minidvblinux.dyndns.org'

bzw. dann auch:

find: `/var/spool/apm.onlinecache': No such file or directory mv: can't rename '/var/spool/apm.filelist.tmp': No such file or directory  

5

Raspberry PI / Raspberry Pi

« on: June 09, 2012, 17:21:55 »

Also folgende Kernel booten beide bei mir:

MLD-3.0.1-arm_kernel-3.1.9.118_119.2.gz
MLD-3.0.1-arm_kernel-3.1.9.118_119.3.gz

Der letztere ein paar Sekunden langsamer, aber das fällt nicht wirklichs in Gewicht.

Weiterhin ist mir noch folgender Fehler beim Boot aufgefallen:

Importing addon: xineliboutput
ldconfig: skipping /usr/lib/i386-linux-gnu/mesa/libGL.so.1: Too many levels of symbolic links


PS: Die neuen Pakete von der Webseite scheinen bei mir alle auf Anhieb zu booten (getestet: xorg, standard, xbmc)

6

Raspberry PI / Raspberry Pi

« on: June 08, 2012, 16:56:57 »

Claus, mit den Addons aus MLD-3.0.1-arm_standard-2012.04.06_46.tgz bekomme ich wunderbar eine Netzwerkverbindung per DHCP und kann auch auf das Webinterface zugreifen.

Allerdings ist das Webinterface elendig langsam, also um ne Seite zu laden dauert es bestimmt mehr als 30s.

Die Netzwerktreiber musst du aber scheinbar nicht extra einbinden, scheinen schon drin zu sein.

7

Raspberry PI / Raspberry Pi

« on: June 08, 2012, 11:21:21 »

Nein, die Meldung ist die, die ich mit dem Foto vom 7. Jun 2012 - 15:44 schon gepostet habe.

Also bei mir laeuft jetzt alles soweit (durch die Kombination wie oben beschrieben) und ich kann die Konfiguration uebers Webinterface vornehmen. Allerdings kann ich jetzt gerade nicht mehr testen, da ich hier auf der Arbeit keinen IR-Empfaenger/DVB-Stick habe. Das muss bis spaeter warten.

Ein Problem was mir aber immer wieder in der Konsole und im Webinterface bei der IR-Konfig auffaellt ist, dass /sys/bus/pci/devices von lspci nicht gefunden wird. Logisch, gibt auch nichts mit PCI auf der Plattform. Die Verzeichnisse fuer hid und usb sind allerdings da. Kann jetzt nicht beurteilen, in weit das die Funktion ueberhaupt beeintraechtigt. Weiterhin gibt es folgende Fehler beim Boot:

Turn on DMA: failed
hwclock: can't open /dev/misc/rtc: no such file or directory (logisch, gibt ja auch keine)
lspci: /sys/bus/pci/devices: no such file or directory

8

Raspberry PI / Raspberry Pi

« on: June 08, 2012, 10:05:44 »

Btw, die Device-Namen von der SD-Karte sind /dev/mmcblk0pX, wobei X halt fuer die Partition steht.

9

Raspberry PI / Raspberry Pi

« on: June 08, 2012, 10:02:54 »

Also das neue Image MLD-3.0.1-arm_base-2012.06.07_46.tgz bootet bei mir nicht mehr. Der Kernel scheints wohl wieder nicht zu tun:

... Attempted to kill init ...

Wenn ich den 125er wieder nehme klappt wieder alles.

Ich bin jetzt bei folgender Kombination, die bei mir gut funktioniert (habe gerade das Setup durchgespielt, mal sehen wie es weiter geht, bislang stehts beim schwarzen Bildschirm mit dem "MLD HD" Logo):

MLD-3.0.1-arm_standard-2012.04.06_46.tgz
MLD-3.0.1-arm_kernel-3.1.9.113_125.gz
Firmware vom Git-Hub RPi

10

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 22:43:27 »

Okay die Frage hab ich mir wohl selbst beantwortet, die FAT-Partition muss so heißen. Ggf. sind die "." durch "~" zu ersetzen. Dann bootet es durch bis zum Setup.

Zum testen werde ich dann allerdings erst morgen richtig kommen!

11

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 22:25:38 »

Super Claus, ich glaube so langsam siehts gut aus. Mit dem 125er Kernel sieht die Ausgabe so aus:



Nach ner Weile endet es dann hier:



Ich denke das ist jetzt nur noch nen kleines Problem oder? Muss die FAT-Partition so benannt werden oder wo muss der Name "MLD-3.0.1" verwendet werden?

12

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 22:18:06 »

zoolander, quasi alles richtig. Aber momentan tüftelt clausmuus noch an einem lauffähigen Kernel für den RPi. Ich bin aber zuversichtlich das das Problem bald gelöst ist, dann kanns sicherlich ans "wirkliche" testen gehen

13

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 17:10:54 »

Danke für deine Mühe!

Hmm weder der 123er noch der 124er booten jetzt allerdings. Bekomme wieder den Debug-Farb-Screen und nichts passiert. ABER, ich hab jetzt meinen UART Adapter an die 3 GPIO-Pins für die serielle Verbindung zum RPi angeschlossen und siehe da, man bekommt vernünftige Debug-Informationen.

Boot beim 123er:

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.9 (nightbuild@mld-devel-arm) (gcc version 4.4.5 (Debian 4.4.5-8) ) #9 Thu Jun 7 16:39:53 CEST 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 56896
[    0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=576 bcm2708.boardrev=0x2 bcm2708.serial=0xc79fb6db smsc95xx.macaddr=B8:27:EB:9F:B6:DB initrd=/boot/initrd dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 nosplash noquiet
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 224MB = 224MB total
[    0.000000] Memory: 217124k/217124k available, 12252k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xce800000 - 0xd8000000   ( 152 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xce000000   ( 224 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0587bb4   (5631 kB)
[    0.000000]       .init : 0xc0588000 - 0xc08fd000   (3540 kB)
[    0.000000]       .data : 0xc08fe000 - 0xc092f028   ( 197 kB)
[    0.000000]        .bss : 0xc092f04c - 0xc09f84ac   ( 806 kB)
[    0.000000] NR_IRQS:85
[    0.000000] timer_set_mode: unhandled mode:1
[    0.000000] timer_set_mode: unhandled mode:3
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    2.246502] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    2.305872] pid_max: default: 32768 minimum: 301
[    2.306404] Mount-cache hash table entries: 512
[    2.306957] Initializing cgroup subsys cpuacct
[    2.307027] Initializing cgroup subsys devices
[    2.307064] Initializing cgroup subsys freezer
[    2.307095] Initializing cgroup subsys blkio
[    2.307200] CPU: Testing write buffer coherency: ok
[    2.307317] ftrace: allocating 14356 entries in 43 pages
[    2.362344] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    2.366239] NET: Registered protocol family 16
[    2.366933] kworker/u:0 used greatest stack depth: 6604 bytes left
[    2.374237] vc-mem: mm_vc_mem_phys_addr = 0x00000000
[    2.374305] vc-mem: mm_vc_mem_size      = 0x10000000 (256 MiB)
[    2.375700] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    2.375770] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    2.375807] mailbox: Broadcom VideoCore Mailbox driver
[    2.375913] bcm2708_vcio: mailbox at f200b880
[    2.376355] bcm_power: Broadcom power driver
[    2.376406] bcm_power_open() -> 0
[    2.376432] bcm_power_request(0,
[    2.877119] bcm_mailbox_read -> 00000080, 0
[    2.877159] bcm_power_request -> 0
[    2.877184] Serial: AMBA PL011 UART driver
[    2.877352] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    3.183647] console [ttyAMA0] enabled
[    3.202483] kworker/u:0 used greatest stack depth: 6372 bytes left
[    3.267296] bio: create slab <bio-0> at 0
[    3.275095] SCSI subsystem initialized
[    3.279811] usbcore: registered new interface driver usbfs
[    3.286463] usbcore: registered new interface driver hub
[    3.292404] usbcore: registered new device driver usb
[    3.301289] Switching to clocksource stc
[    3.307624] Switched to NOHz mode on CPU #0
[    3.328954] FS-Cache: Loaded
[    3.332685] CacheFiles: Loaded
[    3.377120] NET: Registered protocol family 2
[    3.381882] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    3.390019] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    3.397515] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    3.404153] TCP: Hash tables configured (established 8192 bind 8192)
[    3.410572] TCP reno registered
[    3.413740] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    3.419650] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    3.426389] NET: Registered protocol family 1
[    3.430860] Kernel panic - not syncing: compression method gzip not configured
[    3.438213] [<c001564c>] (unwind_backtrace+0x0/0x100) from [<c03ee99c>] (dump_stack+0x20/0x24)
[    3.446904] [<c03ee99c>] (dump_stack+0x20/0x24) from [<c03eea0c>] (panic+0x6c/0x1a4)
[    3.454703] [<c03eea0c>] (panic+0x6c/0x1a4) from [<c058abb0>] (populate_rootfs+0x2c/0x230)
[    3.463042] [<c058abb0>] (populate_rootfs+0x2c/0x230) from [<c00084ec>] (do_one_initcall+0x48/0x1a0)
[    3.472247] [<c00084ec>] (do_one_initcall+0x48/0x1a0) from [<c0588288>] (kernel_init+0x80/0x124)
[    3.481116] [<c0588288>] (kernel_init+0x80/0x124) from [<c000f3fc>] (kernel_thread_exit+0x0/0x8)

Beim 124er bekomme ich keinerlei Ausgabe, der scheint also grundlegend "kaputt" zu sein.

14

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 15:44:54 »

Bootet bis hier her:


 

15

Raspberry PI / Raspberry Pi

« on: June 07, 2012, 13:37:17 »

Also der 120er bootet nach wie vor nicht, auch nach blanker SD-Karte und alter/neuer Firmware.

Der 121er von gerade tut allerdings was, auch wenn er nicht komplett durchbootet, siehe Foto:



Aber darauf lässt sich doch sicherlich aufbauen. Was hast du jetzt verändert?