Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TV-Mensch

1
Raspberry PI / SATIP-ERROR: Detected invalid status code 455 / 400 -> Channel: no data 16
« on: August 24, 2018, 19:07:31 »
Um Auszuschließen, dass es a Rasperry Pi3 liegt habe ich probeweise auf einem alten Laptop nun die MLD 5.3 i386 stable installiert.

Im Vergleich zum Pi3 funktionieren nun, mit den selben Einstellunngen, auch die verschlüsselten HD Sender zu 95% zuverlässig.
Und das Obwohl ich auch hier folgende Fehler im Log finde:

Code: [Select]
Aug 24 18:57:16 (MLD) user.err vdr: [1580] SATIP-ERROR: Detected invalid status code 455: rtsp://192.168.178.54/ [device 1]
Aug 24 18:57:16 (MLD) user.err vdr: [1580] SATIP-ERROR: Pid update failed - retuning [device 1]
&
Code: [Select]
Aug 24 18:59:23 (MLD) user.err vdr: [1580] SATIP-ERROR: Detected invalid status code 455: rtsp://192.168.178.54/ [device 1]
Aug 24 18:59:23 (MLD) user.err vdr: [1580] SATIP-ERROR: Pid update failed - retuning [device 1]

Alle HD Sender der RTL Gruppe (RTL HD, VOX HD, usw.) funktionieren allerdings auch hier weiterhin überhaupt nicht.

Weiterhin den Laptop als TV Server zu betreiben ist natürlich keine Dauerlösung. Selbiges sollte doch aber auch problemlos mit dem RPi3 gehen?

Wirklich schlau draus werde ich weiterhin nicht. Jegliche Suche nach den Fehlercodes im Log führt mich zu Foreneinträgen oder Gitub-Seiten, in denen die Fehler seit 2015 als gelöst gelten...

2
Raspberry PI / SATIP-ERROR: Detected invalid status code 455 / 400 -> Channel: no data 16
« on: August 23, 2018, 18:39:38 »
Guten Tag liebes MLD Forum,
ich nutze MLD nun schon seit 5.3 und bin wirklich sehr zufrieden! Leider habe ich allerdings schon immer ein Problem mit den HD Sendern, wodurch ich aktuell auf 5.4 stable gewechselt bin.

Mein Setup:
-   DUR-line DCR 5-1-8-k Kaskade mit DUR-line D4FV Verteiler
-   Octopus Net S2 mit 4 angeschlossenen Tunern via Unicable inkl. Alphacrypt CAM und aktiver HD+ Karte
-   Rasperry PI3 als Headless - Server mit installiertem MLD 5.4 (Installierte VDR-Plugins: satip, live, vnsiserver)
-   Mehrere Kodi Boxen mit vdr-vnsi Plugin als „Endgeräte“

Und nun zum Problem:
SD Sender sowie unverschlüsselte HD Sender funktionieren tadellos und zu 100% zuverlässig. Bei verschlüsselten HD Sendern klappt es immer mal wieder aktuell aber eher nur zu 5%.
Alle HD Sender der RTL Gruppe (RTL HD, VOX HD, usw.) habe ich allerdings noch nie zum laufen bekommen.

Als Fehlercode über den Zugriff per VNSI (Kodi) erhalte ich stehts „VNSI: Channel: no data 16“.

Zur besseren Darstellung habe ich Beispielhaft mal per über Kodi die Sender Kabel 1 HD sowie DMAX HD laufen lassen.
Keiner der Sender funktionierte. Hier die entsprechende Stelle im Log (Level3):

Code: [Select]
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: LiveStreamer::Close - close
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: Successfully found following device: 0xb1fe10 (2) for receiving, priority=0
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: Dummy receiver (0x6e424150) activated
Aug 23 18:24:03 (none) user.debug vdr: [9706] device 2 receiver thread started (pid=7798, tid=9706, prio=high)
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: activate live receiver: 1
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: Successfully switched to channel 4 - kabel eins HD
Aug 23 18:24:03 (none) user.debug vdr: [9707] cLiveStreamer stream processor thread started (pid=7798, tid=9707, prio=high)
Aug 23 18:24:03 (none) user.info vdr: [9705] VNSI: Started streaming of channel kabel eins HD (timeout 10 seconds)
Aug 23 18:24:03 (none) user.info vdr: [7801] SATIP: Detected 1 RTP packet error [device 0]
Aug 23 18:24:04 (none) user.info vdr: [9707] VNSI: Created stream for pid=767 and type=8
Aug 23 18:24:04 (none) user.info vdr: [9707] VNSI: Created stream for pid=771 and type=1
Aug 23 18:24:04 (none) user.info vdr: [9707] VNSI: Created stream for pid=34 and type=12
Aug 23 18:24:06 (none) user.info vdr: [7824] VNSI: Requesting clients to reload channel list
Aug 23 18:24:06 (none) user.info vdr: [7798] retuning due to modification of channel 4 (kabel eins HD)
Aug 23 18:24:06 (none) user.info vdr: [7798] switching to channel 4 S19.2E-1-1017-61302 (kabel eins HD)
Aug 23 18:24:06 (none) user.err vdr: [7802] SATIP-ERROR: Detected invalid status code 455: rtsp://192.168.178.54/ [device 0]
Aug 23 18:24:06 (none) user.err vdr: [7802] SATIP-ERROR: Pid update failed - retuning [device 0]
Aug 23 18:24:06 (none) user.debug vdr: [7843] device 3 receiver thread ended (pid=7798, tid=7843)
Aug 23 18:24:06 (none) user.info vdr: [7798] VNSI: re-tune to channel kabel eins HD
Aug 23 18:24:06 (none) user.info vdr: [9707] VNSI: re-tuning...
Aug 23 18:24:06 (none) user.info vdr: [9707] VNSI: close video input ...
Aug 23 18:24:06 (none) user.info vdr: [9707] VNSI: activate live receiver: 0
Aug 23 18:24:06 (none) user.info vdr: [9707] VNSI: Dummy receiver (0x6e424150) deactivated
Aug 23 18:24:06 (none) user.info vdr: [9707] VNSI: Successfully found following device: 0xb1fe10 (2) for receiving, priority=0
Aug 23 18:24:07 (none) user.info vdr: [9707] VNSI: Dummy receiver (0x70409d20) activated
Aug 23 18:24:07 (none) user.info vdr: [9707] VNSI: activate live receiver: 1
Aug 23 18:24:11 (none) user.info vdr: [7824] VNSI: Requesting clients to reload channel list
Aug 23 18:24:13 (none) user.info vdr: [9707] VNSI: Channel: no data 16
Aug 23 18:24:15 (none) user.info vdr: [9707] VNSI: exit streamer thread
Aug 23 18:24:15 (none) user.debug vdr: [9707] cLiveStreamer stream processor thread ended (pid=7798, tid=9707)
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: LiveStreamer::Close - close
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: activate live receiver: 0
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: Dummy receiver (0x70409d20) deactivated
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: LiveStreamer::Close - close
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: Successfully found following device: 0xb8c3c8 (3) for receiving, priority=0
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: Dummy receiver (0x6e424990) activated
Aug 23 18:24:15 (none) user.debug vdr: [9708] device 3 receiver thread started (pid=7798, tid=9708, prio=high)
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: activate live receiver: 1
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: Successfully switched to channel 3 - DMAX HD
Aug 23 18:24:15 (none) user.debug vdr: [9709] cLiveStreamer stream processor thread started (pid=7798, tid=9709, prio=high)
Aug 23 18:24:15 (none) user.info vdr: [9705] VNSI: Started streaming of channel DMAX HD (timeout 10 seconds)
Aug 23 18:24:15 (none) user.info vdr: [7801] SATIP: Detected 1 RTP packet error [device 1]
Aug 23 18:24:16 (none) user.info vdr: [7824] VNSI: Requesting clients to reload channel list
Aug 23 18:24:16 (none) user.info vdr: [9709] VNSI: Created stream for pid=767 and type=8
Aug 23 18:24:16 (none) user.info vdr: [9709] VNSI: Created stream for pid=771 and type=1
Aug 23 18:24:16 (none) user.info vdr: [9709] VNSI: Created stream for pid=34 and type=12
Aug 23 18:24:18 (none) user.info vdr: [7798] retuning due to modification of channel 3 (DMAX HD)
Aug 23 18:24:18 (none) user.info vdr: [7798] switching to channel 3 S19.2E-1-1109-5402 (DMAX HD)
Aug 23 18:24:18 (none) user.err vdr: [7805] SATIP-ERROR: Detected invalid status code 455: rtsp://192.168.178.54/ [device 1]
Aug 23 18:24:18 (none) user.info vdr: [7798] VNSI: re-tune to channel DMAX HD
Aug 23 18:24:18 (none) user.debug vdr: [9706] device 2 receiver thread ended (pid=7798, tid=9706)
Aug 23 18:24:18 (none) user.info vdr: [9709] VNSI: re-tuning...
Aug 23 18:24:18 (none) user.info vdr: [9709] VNSI: close video input ...
Aug 23 18:24:18 (none) user.info vdr: [9709] VNSI: activate live receiver: 0
Aug 23 18:24:18 (none) user.info vdr: [9709] VNSI: Dummy receiver (0x6e424990) deactivated
Aug 23 18:24:18 (none) user.info vdr: [9709] VNSI: Successfully found following device: 0xb8c3c8 (3) for receiving, priority=0
Aug 23 18:24:19 (none) user.info vdr: [9709] VNSI: Dummy receiver (0x7250d2e0) activated
Aug 23 18:24:19 (none) user.info vdr: [9709] VNSI: activate live receiver: 1
Aug 23 18:24:21 (none) user.info vdr: [7824] VNSI: Requesting clients to reload channel list
Aug 23 18:24:25 (none) user.info vdr: [9709] VNSI: Channel: no data 16
Aug 23 18:24:26 (none) user.info vdr: [7824] VNSI: Requesting clients to reload channel list
Aug 23 18:24:27 (none) user.info vdr: [9709] VNSI: exit streamer thread
Aug 23 18:24:27 (none) user.debug vdr: [9709] cLiveStreamer stream processor thread ended (pid=7798, tid=9709)
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: LiveStreamer::Close - close
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: activate live receiver: 0
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: Dummy receiver (0x7250d2e0) deactivated
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: close video input ...
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: LiveStreamer::Close - close
Aug 23 18:24:27 (none) user.info vdr: [9705] VNSI: close video input ...

Hat jemand eine Idee wie ich die HD Sender zum Laufen bekomme?

Beste Grüße,
TV-Mensch