[Christian]

so wie ich das nun verstehe reicht es ja das ich die beiden addons ssh und lirc neu ziehe (update)

hmm aber irgendwie laufen die weiterhin nicht!

setzte mal das ganze system neu auf!

und versuche mal den sshd per hand zu starten mit

"sshd -E"
 

[MarMic]

ja ansich ist das system das gleiche wie gestern den an der iso hat sich nichts geändert? trotzdem neu machen? na gut :-)

[MarMic]

frisch aufgesetzt brachte keine besserung!

allerdings sshd -E lässt mich dann wieder drauf zu greifen!

greetz teste gleich weiter udn poste die logs!

so edit://

nach dem ich nun wieder per ssh zugreifen kann

Code: [Select]

Apr  4 14:33:21 (none) syslog.info syslogd started: BusyBox v1.6.0
Apr  4 14:33:21 (none) user.notice kernel: klogd started: BusyBox v1.6.0 (2008-04-04 03:05:42 CEST)
Apr  4 12:33:24 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
Apr  4 12:33:24 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Apr  4 12:33:24 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Apr  4 12:33:24 (none) user.warn kernel: dvb_ttpci: saa7113 not accessible.
Apr  4 12:33:25 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Apr  4 12:33:25 (none) user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Apr  4 12:33:25 (none) user.warn kernel: saa7146: register extension 'budget dvb'.
Apr  4 12:33:25 (none) user.warn kernel: saa7146: register extension 'budget_av'.
Apr  4 12:33:25 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Apr  4 12:33:25 (none) user.info kernel: bt878: AUDIO driver version 0.0.0 loaded
Apr  4 12:33:25 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Apr  4 12:33:25 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Apr  4 12:33:29 (none) user.err vdr: [1233] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:33:34 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Apr  4 12:33:34 (none) user.debug kernel: PCI: setting IRQ 10 as level-triggered
Apr  4 12:33:34 (none) user.info kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Apr  4 12:33:34 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr  4 12:33:35 (none) user.err vdr: [1572] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:33:39 (none) user.err vdr: [1629] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:33:39 (none) user.err vdr: [1632] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:33:39 (none) authpriv.info dropbear[1683]: premature exit: Failed to daemonize: No such device
Apr  4 12:35:51 (none) auth.info login[1695]: root login on 'tty1'


Code: [Select]

Setting up logging:
done
Mounting default filesystems:
done
Turn on dma for /dev/hda:
done
Turn on dma for /dev/hdc:
done
CD/DVD device found on /dev/hdc
done
Linux filesystem found on /dev/hda1
  Mounting to /mnt/hda1:
done
Import config directory:
done
Mounting all filesystems:
done
Import setings:
done
Setting up netware:
done
Setting timezone:
done
Installing keymap-de addon:
Load german keymap:
done
done
Installing dvb addon:
Loading dvb modules
done
done
Installing landriver.small addon:
done
Installing vdr addon:
Starting VDR
done
done
Installing addons addon:
done
Installing setup addon:
done
Installing ssh addon:
done
Load german keymap:
done
Loading landriver modules into kernel
done
connecting to lan
done
Stoping VDR
done
Starting VDR
done
Seting up setup menu:
done
Starting sshd:
Listen on IP: 192.168.2.10
done

You can login as 'root' with password 'root'
============================================

nach sshd -E kommt auf der shell:

Apr 04 12:36:21 Running in background


//edit lirc geht auch weiterhin nicht!

Code: [Select]

Apr  4 14:57:43 (none) syslog.info syslogd started: BusyBox v1.6.0
Apr  4 14:57:43 (none) user.notice kernel: klogd started: BusyBox v1.6.0 (2008-04-04 03:05:42 CEST)
Apr  4 12:57:46 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
Apr  4 12:57:46 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Apr  4 12:57:46 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Apr  4 12:57:46 (none) user.warn kernel: dvb_ttpci: saa7113 not accessible.
Apr  4 12:57:47 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Apr  4 12:57:47 (none) user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Apr  4 12:57:47 (none) user.warn kernel: saa7146: register extension 'budget dvb'.
Apr  4 12:57:47 (none) user.warn kernel: saa7146: register extension 'budget_av'.
Apr  4 12:57:47 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Apr  4 12:57:47 (none) user.info kernel: bt878: AUDIO driver version 0.0.0 loaded
Apr  4 12:57:47 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Apr  4 12:57:47 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Apr  4 12:57:53 (none) user.err vdr: [1292] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:57:53 (none) user.err vdr: [1292] ERROR: /dev/lircd: Connection refused
Apr  4 12:57:53 (none) user.err vdr: [1292] ERROR: remote control LIRC not ready!
Apr  4 12:57:57 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Apr  4 12:57:57 (none) user.debug kernel: PCI: setting IRQ 10 as level-triggered
Apr  4 12:57:57 (none) user.info kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Apr  4 12:57:57 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr  4 12:57:57 (none) user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Apr  4 12:57:59 (none) user.err vdr: [1657] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:57:59 (none) user.err vdr: [1657] ERROR: /dev/lircd: Connection refused
Apr  4 12:57:59 (none) user.err vdr: [1657] ERROR: remote control LIRC not ready!
Apr  4 12:58:04 (none) user.err vdr: [1722] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:58:04 (none) user.err vdr: [1725] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr  4 12:58:04 (none) authpriv.info dropbear[1777]: premature exit: Failed to daemonize: No such device
Apr  4 12:58:25 (none) auth.info login[1789]: root login on 'tty1'
Apr  4 12:58:44 (none) authpriv.info dropbear[1813]: premature exit: Failed to daemonize: No such device

lirc log:

Code: [Select]

Apr  4 12:57:58 MLD.localdom lircd: daemon() failed
Apr  4 12:57:58 MLD.localdom lircd: No such device
Apr  4 12:57:58 MLD.localdom lircd: caught signal
Manuel gestartet:
Apr  4 12:58:28 MLD.localdom lircd: daemon() failed
Apr  4 12:58:28 MLD.localdom lircd: No such device
Apr  4 12:58:28 MLD.localdom lircd: caught signal


[Bernd]

und ich dachte lirc würde nur bei mir nicht gehen... Puh

Wollte aber eigentlich nur ein Kompliment an Claus fürs Addon-Addon los werden. Das ist ja mittlerweile richtig komfortabel.

- Statusanzeige
- Abhängigkeiten werden erkannt und alles Notwendige wird nachinstalliert.

echt cool

Gruß Bernd

[clausmuus]

Hi,

und ab morgen geht hoffentlich auch das lirc-Addon wieder

Und wenn der Kernel aktualisiert wird, werden nun auch alle Addons aktualisiert die nen Kernelmodul enthalten (so hab ich's jedenfalls geplant). Da so nen Update jedoch nur äußerst selten vorkommt, wird nen Test dieser Funktion noch ne weile warten müssen.

Claus