[JochenS]

Intro
Das soll ein guide für raspberry PI newbees und MLD newbees werden, und meine Erfahrungen widerspiegeln. Vielleicht ist es ja in einem Jahr so etwas wie
partyfotos/vdr für den yavdr. Wenn ich neue Erkenntnisse habe, werde ich sie einpflegen. Kommentare und Hilfen sind gerne willkommen!

update 1: 29. Jan 2013: test neue version vom 23. Jan 2013, Festplatte

Hardware
Raspberry PI mit 512 MB
Technotrend S2 3600 (USB)
Toshiba 1GB 2,5

[clausmuus]

Hi,

Danke für den ausführlichen Bericht. Damit weiß ich dann auch gleich, wo ich demnächst noch ein wenig nachbessern muss

Claus

[JochenS]

so wars auch ein bischen gedacht:)
Claus, ist HD ist bei Dir auch so schlecht?

[clausmuus]

Hi,

ich hab das länger nicht ausprobiert, da ich immer nur mit nem dvb-t Stick getestet hatte. Es ging aber mal problemlos. Ich muss das also erst noch mal überprüfen. Ich vermute es liegt an der z.Z. verwendeten Firmware Version. Da gibt's inzwischen aber bestimmt schon wieder neuere. (mit anderen Problemen )

Claus

[steiniplatte]

Hallo, wollte mich hier auch zu Wort melden, da ich die selbe Hardwarekonfiguration wie Jochen im Einsatz habe. Zusätzlich habe ich den Lirc Stack installiert und den Empfänger in der TT3600 ohne Nachhelfen sofort nutzen können. Tasten prellen ein wenig, Tastendefinitionen passen nicht ganz, aber nicht dramatisch. SD geht recht gut, das ein oder andere Artefakt, Umschaltzeiten sind ganz OK.

Massive Pobleme gibt es bei HD, da kommt nur im oberen Bereich ein erkennbares Bild zustande, danach hängt das ganze, Umschalten ist nicht mehr möglich.
Mit der Firmware als Ursache bin ich skeptisch, wenn ich das richtig verstehe, ist die auf einem nicht flüchtigen Bereich gespeichert bei der TT3600, wird also nicht beim Hochfahren geflasht. Steht auch nix zum Flashvorgang im Messagelog. Meine TT3600 lief mal im Backend an einem Dockstar, auch mit HD.

Im Message Log ist ausser den bekannten "pctv452e: I2C error ..." Meldungen nichts auffälliges zu sehen, im VOMPSERVER Log fällt mir auch nichts auf.
Im VOMPCLIENT Log tauchen nach Umschalten auf einen HD Kanal Meldungen der Art "[mp3 @ 0x4c6f4320] incomplete frame " auf

Mein Fazit bisher: Alles in allem schon fast akzeptabel, prima, außer HD. Parallel teste ich gegen eine openelec mit tvheadend, die MLD macht da schon eine bessere Figur beim Live TV. Wobei XBMC auf dem RPi schon fast ein Must Have ist, MLD mit XBMC wäre natürlich prima. Kompilieren wollte ich mir sparen, gibt es da einen Weg.
Vielen Dank schon Mal
steiniplatte
 

[clausmuus]

Hi,

ich hab mal wieder neue ISOs mit den neusten versionen (der RPI Firmware und vom vompclient) erstellt. Zum testen bin ich noch nicht gekommen. Wer mag, kann das ja gerne mal ausprobieren und berichten.

Claus

[alcoheca]

Hi,

ich hab mal wieder neue ISOs mit den neusten versionen (der RPI Firmware und vom vompclient) erstellt. Zum testen bin ich noch nicht gekommen. Wer mag, kann das ja gerne mal ausprobieren und berichten.

Claus

Hi sorry If I've misread this - as I'm using google translate - but I'd be willing to test the new ISO with updated RPI firmware and vompclient.

I've tried both the prebuilt vompserver RPI iso, and a generated one and neither work correctly. Both complain about VHCI initialization problems.

[clausmuus]

Thank you for testing. I will check this myself.

Claus

[JochenS]

Hmmm.. mit der aktuellen Version kommt das MLD logo aber danach bleibt der Bildschirm schwarz.

Hier der dmesg output oder kann ich sonst was hilfreiches beitragen? (sorry, für den langen post, kann ich den verstecken?)

Code: [Select]

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.27.138 (nightbuild@armv6) (gcc version 4.6.3 (Debian 4.6.3-8+rpi1) ) #1 PREEMPT Tue Oct 23 04:37:29 CEST 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c05946c0, node_mem_map c063c000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1610 bcm2708_fb.fbheight=624 bcm2708.boardrev=0xf bcm2708.serial=0x8b4ad86d smsc95xx.macaddr=B8:27:EB:4A:D8:6D sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000  root=/dev/mmcblk0p1 initrd=/boot/initrd splash=silent quiet QUIET=1 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 120184k/120184k available, 10888k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xe8000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05467d4   (5370 kB)
[    0.000000]       .init : 0xc0547000 - 0xc05677d4   ( 130 kB)
[    0.000000]       .data : 0xc0568000 - 0xc0594d40   ( 180 kB)
[    0.000000]        .bss : 0xc0594d64 - 0xc063bd28   ( 668 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] timer_set_mode: unhandled mode:1
[    0.000000] timer_set_mode: unhandled mode:3
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000341] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
[    0.060072] pid_max: default: 32768 minimum: 301
[    0.060560] Mount-cache hash table entries: 512
[    0.060998] Initializing cgroup subsys cpuacct
[    0.061054] Initializing cgroup subsys devices
[    0.061068] Initializing cgroup subsys freezer
[    0.061080] Initializing cgroup subsys blkio
[    0.061190] CPU: Testing write buffer coherency: ok
[    0.061490] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.072619] NET: Registered protocol family 16
[    0.076456] bcm2708.uart_clock = 0
[    0.085970] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.085994] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.086009] mailbox: Broadcom VideoCore Mailbox driver
[    0.086108] bcm2708_vcio: mailbox at f200b880
[    0.086491] bcm_power: Broadcom power driver
[    0.086514] bcm_power_open() -> 0
[    0.086525] bcm_power_request(0, 8)
[    0.587201] bcm_mailbox_read -> 00000080, 0
[    0.587220] bcm_power_request -> 0
[    0.587232] Serial: AMBA PL011 UART driver
[    0.587391] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.670657] bio: create slab <bio-0> at 0
[    0.673912] SCSI subsystem initialized
[    0.674733] usbcore: registered new interface driver usbfs
[    0.675482] usbcore: registered new interface driver hub
[    0.676010] usbcore: registered new device driver usb
[    0.679537] Switching to clocksource stc
[    0.679834] FS-Cache: Loaded
[    0.680341] CacheFiles: Loaded
[    0.713448] NET: Registered protocol family 2
[    0.713880] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.715016] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.715145] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.715223] TCP: Hash tables configured (established 4096 bind 4096)
[    0.715237] TCP reno registered
[    0.715256] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.715286] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.715673] NET: Registered protocol family 1
[    0.716464] RPC: Registered named UNIX socket transport module.
[    0.716488] RPC: Registered udp transport module.
[    0.716499] RPC: Registered tcp transport module.
[    0.716511] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.716828] Trying to unpack rootfs image as initramfs...
[    1.139571] Freeing initrd memory: 3328K
[    1.140548] bcm2708_dma: DMA manager at c8808000
[    1.147939] bcm2708_gpio: bcm2708_gpio_probe c056fc18
[    1.160113] vc-mem: phys_addr:0x00000000 mem_base=0x0ec00000 mem_size:0x10000000(256 MiB)
[    1.212213] audit: initializing netlink socket (disabled)
[    1.212299] type=2000 audit(1.200:1): initialized
[    1.383501] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.383651] FS-Cache: Netfs 'nfs' registered for caching
[    1.390504] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    1.403812] aufs 3.x-rcN
[    1.403860] msgmni has been set to 241
[    1.408147] io scheduler noop registered
[    1.408170] io scheduler deadline registered
[    1.408356] io scheduler cfq registered (default)
[    1.451082] Console: switching to colour frame buffer device 201x39
[    1.801145] brd: module loaded
[    1.978908] loop: module loaded
[    1.998828] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[    1.998984] vcos: [1]: vchiq_init_state: called
[    2.008722] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[    2.029856] usbcore: registered new interface driver smsc95xx
[    2.029935] cdc_ncm: 04-Aug-2011
[    2.039760] usbcore: registered new interface driver cdc_ncm
[    2.039793] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.267585] Core Release: 2.80a
[    2.267613] Setting default values for core params
[    2.267659] Finished setting default values for core params
[    2.472776] Using Buffer DMA mode
[    2.472799] Periodic Transfer Interrupt Enhancement - disabled
[    2.472811] Multiprocessor Interrupt Enhancement - disabled
[    2.472826] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.472843] Dedicated Tx FIFOs mode
[    2.473035] dwc_otg: Microframe scheduler enabled
[    2.473073] dwc_otg bcm2708_usb: DWC OTG Controller
[    2.473198] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    2.473255] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    2.473326] Init: Port Power? op_state=1
[    2.473336] Init: Power Port (0)
[    2.473437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.473459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.473476] usb usb1: Product: DWC OTG Controller
[    2.473489] usb usb1: Manufacturer: Linux 3.2.27.138 dwc_otg_hcd
[    2.473503] usb usb1: SerialNumber: bcm2708_usb
[    2.480147] hub 1-0:1.0: USB hub found
[    2.480210] hub 1-0:1.0: 1 port detected
[    2.497215] dwc_otg: FIQ enabled
[    2.497241] dwc_otg: NAK holdoff enabled
[    2.497278] Module dwc_common_port init
[    2.502831] usbcore: registered new interface driver uas
[    2.502860] Initializing USB Mass Storage driver...
[    2.516951] usbcore: registered new interface driver usb-storage
[    2.516979] USB Mass Storage support registered.
[    2.520165] usbcore: registered new interface driver libusual
[    2.529992] mousedev: PS/2 mouse device common for all mice
[    2.560165] rtc-test rtc-test.0: rtc core: registered test as rtc0
[    2.571236] rtc-test rtc-test.1: rtc core: registered test as rtc1
[    2.598550] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    2.598681] bcm2835-cpufreq: switching to governor powersave
[    2.598698] bcm2835-cpufreq: switching to governor powersave
[    2.608400] cpuidle: using governor ladder
[    2.608428] cpuidle: using governor menu
[    2.612477] sdhci: Secure Digital Host Controller Interface driver
[    2.612504] sdhci: Copyright(c) Pierre Ossman
[    2.612639] sdhci: Enable low-latency mode
[    2.612681] bcm_power_open() -> 1
[    2.628289] Registered led device: mmc0::
[    2.632592] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.632668] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.648236] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.653632] Registered led device: led0
[    2.679820] Indeed it is in host mode hprt0 = 00021501
[    2.733370] usbcore: registered new interface driver usbhid
[    2.733399] usbhid: USB HID core driver
[    2.734645] TCP cubic registered
[    2.734660] Initializing XFRM netlink socket
[    2.734727] NET: Registered protocol family 17
[    2.734825] Registering the dns_resolver key type
[    2.734897] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.754574] registered taskstats version 1
[    2.754795] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
[    2.755489] Freeing init memory: 128K
[    2.767195] mmc0: new high speed SDHC card at address aaaa
[    2.792127] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[    2.803289]  mmcblk0: p1
[    3.049920] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.050101] Indeed it is in host mode hprt0 = 00001101
[    3.321575] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    3.321603] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.330183] hub 1-1:1.0: USB hub found
[    3.330357] hub 1-1:1.0: 3 ports detected
[    3.610051] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.710441] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.710470] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.721237] smsc95xx v1.0.4
[    3.790021] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4a:d8:6d
[    3.899964] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    4.001101] usb 1-1.2: New USB device found, idVendor=0b48, idProduct=3007
[    4.001131] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.001148] usb 1-1.2: Product: TT-USB2.0
[    4.001160] usb 1-1.2: Manufacturer: TechnoTrend
[    4.119993] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    4.221884] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
[    4.221914] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.221931] usb 1-1.3: Product: USB2.0 Hub
[    4.239784] hub 1-1.3:1.0: USB hub found
[    4.240285] hub 1-1.3:1.0: 4 ports detected
[    4.520269] usb 1-1.3.2: new high-speed USB device number 6 using dwc_otg
[    4.663584] usb 1-1.3.2: New USB device found, idVendor=0480, idProduct=a007
[    4.663616] usb 1-1.3.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.663634] usb 1-1.3.2: Product: External USB 3.0
[    4.663647] usb 1-1.3.2: Manufacturer: Toshiba
[    4.663659] usb 1-1.3.2: SerialNumber: 20121030014396F
[    4.690013] scsi0 : usb-storage 1-1.3.2:1.0
[    5.700953] scsi 0:0:0:0: Direct-Access     Toshiba  External USB 3.0 0    PQ: 0 ANSI: 6
[    5.728489] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.729698] sd 0:0:0:0: [sda] Write Protect is off
[    5.729731] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    5.730737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.605919] aufs test_add:261:mount[1091]: uid/gid/perm /mnt/system 0/0/0755, 0/0/01777
[    8.791410] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
[    8.792771]  sda: sda1
[    8.804975] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    8.806923] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.880570] aufs test_add:261:mount[1106]: uid/gid/perm /mnt/rootimg 1002/1002/0755, 0/0/01777
[    9.389861] aufs test_add:261:mount[1165]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 1002/1002/0755
[    9.581792] aufs test_add:261:mount[1183]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 1002/1002/0755
[    9.987133] aufs test_add:261:mount[1198]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 1002/1002/0755
[   10.316468] aufs test_add:261:mount[1212]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 1002/1002/0755
[   10.650061] aufs test_add:261:mount[1225]: uid/gid/perm /var/spool/apm.mnt/ntp-client 0/0/0777, 1002/1002/0755
[   10.985961] aufs test_add:261:mount[1240]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 1002/1002/0755
[   11.323677] aufs test_add:261:mount[1254]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 1002/1002/0755
[   11.712715] aufs test_add:261:mount[1270]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 1002/1002/0755
[   12.104870] aufs test_add:261:mount[1290]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 1002/1002/0755
[   12.504399] aufs test_add:261:mount[1307]: uid/gid/perm /var/spool/apm.mnt/dummydevice 0/0/0777, 1002/1002/0755
[   12.902769] aufs test_add:261:mount[1324]: uid/gid/perm /var/spool/apm.mnt/vompserver 0/0/0777, 1002/1002/0755
[   13.306703] aufs test_add:261:mount[1343]: uid/gid/perm /var/spool/apm.mnt/lib-av 0/0/0777, 1002/1002/0755
[   13.710892] aufs test_add:261:mount[1362]: uid/gid/perm /var/spool/apm.mnt/vc 0/0/0777, 1002/1002/0755
[   14.121118] aufs test_add:261:mount[1381]: uid/gid/perm /var/spool/apm.mnt/vompclient 0/0/0777, 1002/1002/0755
[   24.942327] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   46.647074] bcm2835 ALSA card created!
[   46.679818] bcm2835 ALSA chip created!
[   46.682002] bcm2835 ALSA chip created!
[   46.698864] bcm2835 ALSA chip created!
[   46.742481] bcm2835 ALSA chip created!
[   46.757503] bcm2835 ALSA chip created!
[   46.764212] bcm2835 ALSA chip created!
[   46.829800] bcm2835 ALSA chip created!
[   50.869437] WARNING: You are using an experimental version of the media stack.
[   50.869460]  As the driver is backported to an older kernel, it doesn't offer
[   50.869470]  enough quality for its usage in production.
[   50.869477]  Use it with care.
[   50.869483] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   50.869493]  da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
[   50.869504]  062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
[   50.869515]  9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
[   50.900335] WARNING: You are using an experimental version of the media stack.
[   50.900357]  As the driver is backported to an older kernel, it doesn't offer
[   50.900367]  enough quality for its usage in production.
[   50.900374]  Use it with care.
[   50.900379] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   50.900390]  da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
[   50.900401]  062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
[   50.900412]  9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
[   50.972860] dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
[   50.972931] pctv452e: pctv452e_power_ctrl: 1
[   50.972939]
[   51.036563] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   51.036946] DVB: registering new adapter (Technotrend TT Connect S2-3600)
[   51.037552] pctv452e: I2C error -121; AA 02  A0 01 14 -> 55 02  A0 00 00.
[   51.049236] dvb-usb: MAC address: 00:d0:5c:64:7a:53
[   51.268540] stb0899_attach: Attaching STB0899
[   51.346872] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[   51.415901] stb6100_attach: Attaching STB6100
[   51.509716] IR keymap rc-tt-1500 not found
[   51.509743] Registered IR keymap rc-empty
[   51.517738] input: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0/input0
[   51.529089] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0
[   51.529170] dvb-usb: schedule remote query interval to 100 msecs.
[   51.529196] pctv452e: pctv452e_power_ctrl: 0
[   51.529204]
[   51.529235] dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.
[   51.543223] usbcore: registered new interface driver pctv452e
[   53.619768] dvb-usb: recv bulk message failed: -110
[   53.619797] dvb-usb: error -110 while querying for an remote control event.
[   55.719719] dvb-usb: recv bulk message failed: -110
[   55.719750] dvb-usb: error -110 while querying for an remote control event.
[   55.801504] pctv452e: pctv452e_power_ctrl: 1
[   55.801516]
[   58.150163] pctv452e: I2C error -121; AA 27  CC 00 01 -> 55 27  CC 00 00.
[   58.165909] pctv452e: I2C error -121; AA 3E  CC 00 01 -> 55 3E  CC 00 00.
[   58.260160] pctv452e: I2C error -121; AA 5A  CC 00 01 -> 55 5A  CC 00 00.
[  291.853046] aufs test_add:261:mount[4984]: uid/gid/perm /var/spool/apm.mnt/lib-curl 0/0/0777, 1002/1002/0755
[  303.361637] aufs test_add:261:mount[5128]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 1002/1002/0755
[  516.633268] pctv452e: pctv452e_power_ctrl: 0
[  516.633281]