[1] Archiv / MLD 3.x / General / Mld Funktioniert Nicht Mehr Mit 2 Karten
 

Offline dwoe

  • Adv. Member
  • ***
  • Posts: 108
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« on: June 04, 2012, 08:49:21 »
Hallo zusammen,

ich hatte das Thema schon mal in einem anderen Thread gestartet - ich beginne jetzt aber nochmal, da ich den Fehler genauer eingrenzen konnte:

Wenn ich meinen VDR mit 2 Karten (ff-sd + budget) betreibe, habe ich weder Bild noch ein OSD etc. Baue ich die budget-Karte aus dem Rechner aus, funktioniert alles wie gewohnt. Wenn ich sie dann wieder rein baue, ist das Bild wieder weg.

Auch wenn ich den MLD neu aufsetze: mit 2 Karten klappts nicht - mit einer schon. Wenn ich die 2. dann nachträglich dazu baue, ist das Bild wieder weg.

Hat jemand eine Idee? Bzw. kann mir jemand sagen, was ich mal tun kann um mich auf Fehlersuche zu begeben?

Vielen Dank,

Dirk

 
Logged
VDR: ASUS E35M1-M (AMD E-350), 2 GB Ram, 1 TB HDD, Technotrend Premium S2-6400

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #1 on: June 04, 2012, 09:09:48 »
Quote
Hallo zusammen,

ich hatte das Thema schon mal in einem anderen Thread gestartet - ich beginne jetzt aber nochmal, da ich den Fehler genauer eingrenzen konnte:

Wenn ich meinen VDR mit 2 Karten (ff-sd + budget) betreibe, habe ich weder Bild noch ein OSD etc. Baue ich die budget-Karte aus dem Rechner aus, funktioniert alles wie gewohnt. Wenn ich sie dann wieder rein baue, ist das Bild wieder weg.

Auch wenn ich den MLD neu aufsetze: mit 2 Karten klappts nicht - mit einer schon. Wenn ich die 2. dann nachträglich dazu baue, ist das Bild wieder weg.

Hat jemand eine Idee? Bzw. kann mir jemand sagen, was ich mal tun kann um mich auf Fehlersuche zu begeben?

Vielen Dank,

Dirk
Hallo Dirk,
hast Du die Möglichkeit die DVB Karten in unterschiedliche PCI Slots zu stecken?
Manchmal hilft das.

Boote 1 x nur mit der FF Karte und 1 x nur mit der Budget Karte und poste die Logs getrennt voneinander + das Log wenn beide Karten eingebaut sind. Evtl. siehst Du einen Unterschied?!

Grüße
Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Offline dwoe

  • Adv. Member
  • ***
  • Posts: 108
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #2 on: June 04, 2012, 09:43:03 »
Hallo und danke,

den Wechsel der PCI-Slots hatte ich schon versucht - leider auch ohne Erfolg.

Ich poste am Abend mal die 3 Logs mit unterschiedlicher Konfiguration.

Gruß,

Dirk
Logged
VDR: ASUS E35M1-M (AMD E-350), 2 GB Ram, 1 TB HDD, Technotrend Premium S2-6400

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20415
    • View Profile
    • ClausMuus.de
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #3 on: June 04, 2012, 13:11:20 »
Eventuell hilft's ja wenn die Treiber in anderer Reihenfolge geladen werden. Das lässt sich im Webif unter Setup/TV/DVB einstellen. Bei Treiber wird nach "auto" eine Liste der gewählten Treiber aufgelistet. Die kannst Du auswählen und dann dort die Reihenfolge ändern.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline dwoe

  • Adv. Member
  • ***
  • Posts: 108
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #4 on: June 04, 2012, 18:55:47 »
Jetzt mal mein Versuch mit verschiedenen Konfigurationen:

nur die ff-sd:
Code: [Select]
Jun  4 16:39:33 (none) syslog.info syslogd started: BusyBox v1.19.4
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2584]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2597]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2610]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2623]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2635]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2649]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2662]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2674]: uid/gid/perm /var/spool/apm.mnt/dvbsddevice 0/0/0777, 0/0/0775
Jun  4 16:39:33 (none) user.warn kernel: aufs test_add:261:mount[2692]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Jun  4 16:39:34 (none) user.warn kernel: aufs test_add:261:mount[2709]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 0/0/0775
Jun  4 16:39:34 (none) user.warn kernel: aufs test_add:261:mount[2726]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Jun  4 16:39:35 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:39:35 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:39:35 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
Jun  4 16:39:35 (none) user.info kernel: XFS (sda2): Ending clean mount
Jun  4 16:39:36 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 253
Jun  4 16:39:37 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Jun  4 16:39:37 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Jun  4 16:39:39 (none) user.info kernel: Linux video capture interface: v2.00
Jun  4 16:39:39 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:39:39 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:39:39 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:39:39 (none) user.err kernel:  Use it with care.
Jun  4 16:39:39 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:39:39 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:39:39 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:39:39 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:39:39 (none) user.err kernel:  Use it with care.
Jun  4 16:39:39 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:39:39 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:39:39 (none) user.info kernel: saa7146: register extension 'av7110'
Jun  4 16:39:39 (none) user.info kernel: saa7146: found saa7146 @ mem f9184000 (revision 1, irq 19) (0x13c2,0x0000)
Jun  4 16:39:39 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Jun  4 16:39:39 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:03:01:aa
Jun  4 16:39:42 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fb2624
Jun  4 16:39:42 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Jun  4 16:39:42 (none) user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Jun  4 16:39:42 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Jun  4 16:39:42 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Jun  4 16:39:42 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (Philips TDA8083 DVB-S)...
Jun  4 16:39:42 (none) user.info kernel: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:01.0/input/input2
Jun  4 16:39:42 (none) user.info kernel: dvb-ttpci: found av7110-0.
Jun  4 18:39:44 (none) user.err vdr: [3333] ERROR: error in /etc/vdr/remote.conf, line 63
Jun  4 16:39:48 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jun  4 16:39:48 (none) user.info kernel: r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xf9328000, f4:6d:04:d6:11:fe, XID 0c200000 IRQ 17
Jun  4 16:39:48 (none) user.info kernel: r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Jun  4 16:39:50 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:39:50 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:39:50 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun  4 16:39:51 (none) user.info kernel: r8169 0000:04:00.0: eth0: link up
Jun  4 16:39:51 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun  4 16:40:02 (none) user.debug kernel: eth0: no IPv6 routers present
Jun  4 16:40:22 (none) user.info kernel: bootsplash: status on console 0 changed to on
Jun  4 18:40:22 (none) auth.info login[8417]: root login on 'tty1'
Jun  4 18:40:22 (none) auth.info login[8418]: root login on 'tty2'
Jun  4 18:40:22 (none) auth.info login[8426]: root login on 'tty3'
Jun  4 18:40:22 (none) auth.info login[8432]: root login on 'tty4'

jetzte nur die budget:
Code: [Select]
Jun  4 16:49:35 (none) syslog.info syslogd started: BusyBox v1.19.4
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2584]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2597]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2610]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2623]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2635]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2649]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2661]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2674]: uid/gid/perm /var/spool/apm.mnt/dvbsddevice 0/0/0777, 0/0/0775
Jun  4 16:49:35 (none) user.warn kernel: aufs test_add:261:mount[2692]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Jun  4 16:49:36 (none) user.warn kernel: aufs test_add:261:mount[2709]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 0/0/0775
Jun  4 16:49:36 (none) user.warn kernel: aufs test_add:261:mount[2726]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Jun  4 16:49:37 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:49:37 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:49:37 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
Jun  4 16:49:37 (none) user.info kernel: XFS (sda2): Ending clean mount
Jun  4 16:49:38 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 253
Jun  4 16:49:39 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Jun  4 16:49:39 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Jun  4 16:49:41 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:49:41 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:49:41 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:49:41 (none) user.err kernel:  Use it with care.
Jun  4 16:49:41 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:49:41 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:49:41 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:49:41 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:49:41 (none) user.err kernel:  Use it with care.
Jun  4 16:49:41 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:49:41 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:49:41 (none) user.info kernel: saa7146: register extension 'budget_ci dvb'
Jun  4 16:49:41 (none) user.info kernel: saa7146: found saa7146 @ mem f9110000 (revision 1, irq 18) (0x13c2,0x1017)
Jun  4 16:49:41 (none) user.warn kernel: saa7146 (0): dma buffer size 192512
Jun  4 16:49:41 (none) user.info kernel: DVB: registering new adapter (TT-Budget/S-1500 PCI)
Jun  4 16:49:41 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:64:ea:95
Jun  4 16:49:41 (none) user.err kernel: IR keymap rc-tt-1500 not found
Jun  4 16:49:41 (none) user.info kernel: Registered IR keymap rc-empty
Jun  4 16:49:41 (none) user.info kernel: input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:00.0/rc/rc0/input2
Jun  4 16:49:41 (none) user.info kernel: rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:00.0/rc/rc0
Jun  4 16:49:41 (none) user.info kernel: LNBx2x attached on addr=8
Jun  4 16:49:41 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Jun  4 18:49:42 (none) user.err vdr: [3240] ERROR: error in /etc/vdr/remote.conf, line 63
Jun  4 18:49:42 (none) user.err vdr: [3240] ERROR: no OSD provider available - using dummy OSD!
Jun  4 16:49:45 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jun  4 16:49:45 (none) user.info kernel: r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xf92e4000, f4:6d:04:d6:11:fe, XID 0c200000 IRQ 17
Jun  4 16:49:45 (none) user.info kernel: r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Jun  4 16:49:47 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:49:47 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:49:47 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun  4 16:49:48 (none) user.info kernel: r8169 0000:04:00.0: eth0: link up
Jun  4 16:49:48 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun  4 18:49:53 (none) user.err vdr: [3240] ERROR: no OSD provider available - using dummy OSD!
Jun  4 16:49:59 (none) user.debug kernel: eth0: no IPv6 routers present
Jun  4 18:50:04 (none) user.err vdr: [3240] ERROR: no OSD provider available - using dummy OSD!

und jetzt beide zusammen:
Code: [Select]
Jun  4 16:53:19 (none) syslog.info syslogd started: BusyBox v1.19.4
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2584]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2597]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2610]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2623]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2635]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2649]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2661]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2674]: uid/gid/perm /var/spool/apm.mnt/dvbsddevice 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2692]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2709]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 0/0/0775
Jun  4 16:53:19 (none) user.warn kernel: aufs test_add:261:mount[2726]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Jun  4 16:53:20 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:53:20 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
Jun  4 16:53:20 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
Jun  4 16:53:21 (none) user.info kernel: XFS (sda2): Ending clean mount
Jun  4 16:53:22 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 253
Jun  4 16:53:23 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Jun  4 16:53:23 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Jun  4 16:53:25 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:53:25 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:53:25 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:53:25 (none) user.err kernel:  Use it with care.
Jun  4 16:53:25 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:53:25 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:53:25 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:53:25 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:53:25 (none) user.err kernel:  Use it with care.
Jun  4 16:53:25 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:53:25 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.info kernel: saa7146: register extension 'budget_ci dvb'
Jun  4 16:53:25 (none) user.info kernel: saa7146: found saa7146 @ mem f9110000 (revision 1, irq 18) (0x13c2,0x1017)
Jun  4 16:53:25 (none) user.warn kernel: saa7146 (0): dma buffer size 192512
Jun  4 16:53:25 (none) user.info kernel: DVB: registering new adapter (TT-Budget/S-1500 PCI)
Jun  4 16:53:25 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:64:ea:95
Jun  4 16:53:25 (none) user.err kernel: IR keymap rc-tt-1500 not found
Jun  4 16:53:25 (none) user.info kernel: Registered IR keymap rc-empty
Jun  4 16:53:25 (none) user.info kernel: input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:00.0/rc/rc0/input2
Jun  4 16:53:25 (none) user.info kernel: rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:00.0/rc/rc0
Jun  4 16:53:25 (none) user.info kernel: LNBx2x attached on addr=8
Jun  4 16:53:25 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Jun  4 16:53:25 (none) user.info kernel: Linux video capture interface: v2.00
Jun  4 16:53:25 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jun  4 16:53:25 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jun  4 16:53:25 (none) user.err kernel:  enough quality for its usage in production.
Jun  4 16:53:25 (none) user.err kernel:  Use it with care.
Jun  4 16:53:25 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jun  4 16:53:25 (none) user.err kernel:  5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.err kernel:  0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control
Jun  4 16:53:25 (none) user.info kernel: saa7146: register extension 'av7110'
Jun  4 16:53:25 (none) user.info kernel: saa7146: found saa7146 @ mem f9320000 (revision 1, irq 19) (0x13c2,0x0000)
Jun  4 16:53:25 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Jun  4 16:53:25 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:03:01:aa
Jun  4 16:53:28 (none) user.warn kernel: dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80fb2624
Jun  4 16:53:28 (none) user.warn kernel: dvb-ttpci: firmware @ card 1 supports CI link layer interface
Jun  4 16:53:28 (none) user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 1 detected
Jun  4 16:53:28 (none) user.info kernel: saa7146_vv: saa7146 (1): registered device video0 [v4l2]
Jun  4 16:53:28 (none) user.info kernel: saa7146_vv: saa7146 (1): registered device vbi0 [v4l2]
Jun  4 16:53:28 (none) user.warn kernel: DVB: registering adapter 1 frontend 0 (Philips TDA8083 DVB-S)...
Jun  4 16:53:28 (none) user.info kernel: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:15.2/0000:05:00.0/0000:06:01.0/input/input3
Jun  4 16:53:28 (none) user.info kernel: dvb-ttpci: found av7110-0.
Jun  4 18:53:29 (none) user.err vdr: [3325] ERROR: error in /etc/vdr/remote.conf, line 63
Jun  4 18:53:29 (none) user.err vdr: [3325] ERROR: no OSD provider available - using dummy OSD!
Jun  4 16:53:32 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jun  4 16:53:32 (none) user.info kernel: r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xf94c2000, f4:6d:04:d6:11:fe, XID 0c200000 IRQ 17
Jun  4 16:53:32 (none) user.info kernel: r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Jun  4 16:53:34 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:53:34 (none) user.info kernel: r8169 0000:04:00.0: eth0: link down
Jun  4 16:53:34 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun  4 16:53:35 (none) user.info kernel: r8169 0000:04:00.0: eth0: link up
Jun  4 16:53:35 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun  4 18:53:42 (none) user.err vdr: [3325] ERROR: no OSD provider available - using dummy OSD!
Jun  4 16:53:45 (none) user.debug kernel: eth0: no IPv6 routers present
Jun  4 18:53:53 (none) user.err vdr: [3325] ERROR: no OSD provider available - using dummy OSD!
Jun  4 16:54:11 (none) user.info kernel: bootsplash: status on console 0 changed to on
Jun  4 18:54:11 (none) auth.info login[10919]: root login on 'tty1'
Jun  4 18:54:11 (none) auth.info login[10920]: root login on 'tty2'
Jun  4 18:54:11 (none) auth.info login[10928]: root login on 'tty3'
Jun  4 18:54:11 (none) auth.info login[10934]: root login on 'tty4'

Kann jemand damit etwas anfangen?

Vielen Dank,

Dirk
Logged
VDR: ASUS E35M1-M (AMD E-350), 2 GB Ram, 1 TB HDD, Technotrend Premium S2-6400

Offline dwoe

  • Adv. Member
  • ***
  • Posts: 108
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #5 on: June 04, 2012, 19:21:16 »
So jetzt habe ich das mit den Treibern mal versucht:

hier stand: "budget-ci, dvb-ttpci"

ich habe jetzt mal: "dvb-ttpci, budget-ci" draus gemacht.

Jetzt habe sofort nach dem Booten ein Bild.

Danke, das scheint es gewesen zu sein!!!

Vielen Dank für die Hilfe,

Dirk
Logged
VDR: ASUS E35M1-M (AMD E-350), 2 GB Ram, 1 TB HDD, Technotrend Premium S2-6400

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20415
    • View Profile
    • ClausMuus.de
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #6 on: June 04, 2012, 23:34:39 »
Hi,

weiß jemand auswendig welche Treiber alle zu ff Karten gehören? Vielleicht lassen die sich ja automatisch nach vorne sortieren.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #7 on: June 05, 2012, 09:26:36 »
für sd karten immer dvb-ttpci, oder?
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20415
    • View Profile
    • ClausMuus.de
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #8 on: June 05, 2012, 10:33:04 »
Hatte ich auch so in Erinnerung. Gibt's für HD auch nur einen Treiber?

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Matthias

  • Expert Member
  • *****
  • Posts: 2006
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #9 on: June 05, 2012, 10:37:36 »
Quote
für sd karten immer dvb-ttpci, oder?
Nicht das da was durcheinander kommt...
Ich habe hier auch SD (Budget) Karten die einen anderen Treiber als dvb-ttpci brauchen.
Oder gilt das obige nur für FF Karten?

Matthias
Logged
Produktiv System:
SAT over IP -> OctopusNet mit Unicable LNB: Inverto IDLU-24UL40-UNMOO-OPP
MLD 5.5 unstable/64Bit , Intel NUC BOXNUC6CAYH, 1 x 128 GB SSD, 8GB RAM + 1 x 3 TB HD per NFS (Synology),  Samsung UE32ES6300, Onkyo TX-8270, Nubert Nuline

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20415
    • View Profile
    • ClausMuus.de
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #10 on: June 05, 2012, 11:23:49 »
Es geht um die FF Karten.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Mld Funktioniert Nicht Mehr Mit 2 Karten
« Reply #11 on: June 05, 2012, 11:40:06 »
Quote
Hatte ich auch so in Erinnerung. Gibt's für HD auch nur einen Treiber?

Claus
bisher ja :-) gibt JA NUR EINE :-)
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

[1] Archiv / MLD 3.x / General / Mld Funktioniert Nicht Mehr Mit 2 Karten
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.