[naubaddi]

Hi Leutz, mein erster Versuch mit 2 DVB Karten ist nicht von Erfolg gekrönt, muß für 2 Karten ein plugin/addon geladen werden?

Karte 1: DVB-S FF
Karte 2: DVB-S + DVB-T budget von Hauppauge

Oder liegt es an der zweiten Karte weil DVB-S und DVB-T auf einer Karte sind?

[MarMic]

was n das für ne zweite karte typ bezeichnung?? und welches dvb addon nutzt du? ausgabe von

ls /mnt/hda/addons (glaube ich)

noch die ausgabe von var/log/messages (wichtig wenn beide karten beim start drin sind)

greetz

[naubaddi]

Hi MarMic, die Karte ist eine "Hauppauge WinTV-HVR-3000 (DVB-T, DVB-S, Multi-Pal)" und schon wieder ausgebaut, war leihweise von einem Bekannten und nur ein Versuch ob es einfach so funktioniert. Da wenig Platz im Gehäuse ist suche ich nach einer schmalen (ca. 7cm) DVB-S budget Karte, habe noch nichts passendes gefunden.

Diese Addons sind installiert:

Code: [Select]

00_MLD-2.0.0_keymap-de-0_24.tgz
20_MLD-2.0.0_kernel-2.6.25.13.2_dvb-31.12.2009_120.tgz
30_MLD-2.0.0_hdparm-8.6_1.tgz
30_MLD-2.0.0_kernel-2.6.25.13.2_usb-0_10.tgz
40_MLD-2.0.0_kernel-2.6.25.13.2_lirc-0.8.4a_98.tgz
40_MLD-2.0.0_vdrapi-1.6.0_vdr-1.6.0.2_190.tgz
45_MLD-2.0.0_kernel-2.6.25.13.2_sensors-2.10.4_22.tgz
45_MLD-2.0.0_perl-5.8.8_15.tgz
45_MLD-2.0.0_win32codecs-1.0_2.tgz
50_MLD-2.0.0_vdrapi-1.6.0_addons-0.4.0_69.tgz
50_MLD-2.0.0_vdrapi-1.6.0_cdda-0.1.0_2.tgz
50_MLD-2.0.0_vdrapi-1.6.0_dvd-cvs_12.tgz
50_MLD-2.0.0_vdrapi-1.6.0_femon-1.6.6_11.tgz
50_MLD-2.0.0_vdrapi-1.6.0_filebrowser-0.2.0_1.tgz
50_MLD-2.0.0_vdrapi-1.6.0_image-0.3.0_4.tgz
50_MLD-2.0.0_vdrapi-1.6.0_mp3-0.10.1_8.tgz
50_MLD-2.0.0_vdrapi-1.6.0_mplayer-0.10.1_7.tgz
50_MLD-2.0.0_vdrapi-1.6.0_setup-0.3.1_27.tgz
50_MLD-2.0.0_vdrapi-1.6.0_systeminfo-0.1.1_8.tgz
60_MLD-2.0.0_kernel-2.6.25.13.2_lan-0_10.tgz
61_MLD-2.0.0_ssh-0.51_24.tgz
70_MLD-2.0.0_backup-1.0_17.tgz
70_MLD-2.0.0_bash-3.1.16_2.tgz
70_MLD-2.0.0_htop-0.6.4_1.tgz
70_MLD-2.0.0_kernel-2.6.25.13.2_acpi-1.0.4_10.tgz
70_MLD-2.0.0_mc-4.6.1_11.tgz
71_MLD-2.0.0_media-tools-1.0rc2_35.tgz

[naubaddi]

...und schon wieder ausgebaut, war leihweise von einem Bekannten...

Hi, was haltet Ihr von einer "TechnoTrend Budget S-1401 Silicon Tuner" als zweite Karte?

http://www.dvbshop.net/product_info.php/in...-TT-Viewer.html

Sieht aus als würde sie in das Gehäuse passen wenn das Slotblech entfernt wird.

[clausmuus]

Für eine zweite Karte brauchen keine Zusätzlichen Addons geladen werden. Bei der Auswahl ist nur zu beachten das für die Karte nen DVB-Treiber verfügbar ist. Die MLD setzt die aktuellsten verfügbaren Treiber ein.
Wenn Du die neue Karte eingebaut hast, musst Du einmalig in der /etc/rc.config unter DVB_DRIVER="" eintragen und neu booten (Du kannst das auch vor dem Einbau machen). Nach dem Booten sollten dort zwei Treiber eingetragen sein. Steht da nur einer drinn, konnte der Zweite erforderliche nicht automatisch erkannt werden. Dann kannst Du den entweder von hand nachtragen, oder falls Dir nicht bekannt ist, welcher benötigt wird, DVB_DRIVER="all" einstellen.

Ich hab schon diverse DVB-Karten gehabt. Abhängig vom verwendetem Mainbord und der eingesetzten Festplatte gab es bei fast allen (zweiten) DVB-Karten irgendwelche Probleme Das dürfte aber da dran liegen das ich immer nur recht alte Mainbords verwendet hatte. Mit Problemen meine ich Gestörte Aufnahmen, gestörtes TV Bild während der Aufnahmen, Reaktionsprobleme der Fernbedienung, extrem hohe Prozessorlast, Probleme mit NDR, inkompatibel zum Mainbord,... also nichts spezifisches.

Claus

[MarMic]

hi ich habe zu meiner ff tt die technisat cablestar hd2 eingebaut (ist ansich ne scheiss karte) und bis jetzt noch gar keine probleme, die claus beschreibt und das ist über ne raiser karte angebunden!

die tt1401 sind glaube ich ganz brauchbar!

@claus und nau ich wollte die addons haben wegen dem dvb treiber und da hat nau ja noch nen uralten geladen!

@nau mal ans netzwerk hängen und ein update all über das osd fahren (vorher vllt das backup addon laden!!!)

vllt haette die karte dann auch out of the box funktioniert, denn bei den treibern gab es in letzter zeit viele UPDATES

greetz MarMic

ps kannst ja mal googlen ob die tt1401 vom v4l2 treiber unterstützt wird

[clausmuus]

@ MarMic,

das die Karte nicht funktionierte dürfte recht sicher da drann gelegen haben, das der passende Treiber nicht geladen wurde, weil in der rc.config sicherlich nur ein Treiber für die FF Karte eingetragen sein dürfte. Sollte das nicht der Fall sein, könnte nen Update durchaus weiterhelfen.

Claus

[MarMic]

OFFTOPIC:
@claus warst du ansich auf dem hamburger vdr treffen? was haben die jungs von yavdr denn schönes vorgeführt?

[clausmuus]

Ne, ich war leider nachher doch nicht da. Ich bin in der Firma nicht weg gekommen

Claus

[naubaddi]

Hi, ein Update wurde gemacht und bei DVB_DRIVER= ist all eingetragen, die budget Karte mag trotzdem nicht. Auf der DVB-S budget Karte steht "Philips, PICO 200 94V-0, DVB-S VER B1" und so sieht die /var/log/message aus:

Code: [Select]

Apr 20 14:16:55 (none) syslog.info syslogd started: BusyBox v1.9.2
Apr 20 14:16:55 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:16:55 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:55 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:55 (none) user.info kernel: EXT3 FS on sda1, internal journal
Apr 20 14:16:55 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:56 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:56 (none) user.info kernel: EXT3 FS on sda2, internal journal
Apr 20 14:16:56 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:17:00 (none) user.info kernel: Linux video capture interface: v2.00
Apr 20 14:17:00 (none) user.warn kernel: saa7146: register extension 'dvb'.
Apr 20 14:17:00 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 14:17:00 (none) user.warn kernel: saa7146: found saa7146 @ mem e0874000 (revision 1, irq 16) (0x13c2,0x0000).
Apr 20 14:17:01 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Apr 20 14:17:01 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:5b:af:8b
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: ves1x93: Detected ves1893a rev2
Apr 20 14:17:01 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (VLSI VES1x93 DVB-S)...
Apr 20 14:17:01 (none) user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Apr 20 14:17:01 (none) user.info kernel: dvb-ttpci: found av7110-0.
Apr 20 14:17:01 (none) user.err vdr: [2524] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: /dev/lircd: No such file or directory
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: remote control LIRC not ready!
Apr 20 14:17:49 (none) user.info kernel: 8139too Fast Ethernet driver 0.9.28
Apr 20 14:17:49 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Apr 20 14:17:49 (none) user.info kernel: eth0: RealTek RTL8139 at 0xe08e2000, 00:30:18:a2:59:e4, IRQ 19
Apr 20 14:17:49 (none) user.debug kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Apr 20 14:17:49 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 20 14:17:49 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 61
Apr 20 14:17:50 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Apr 20 14:17:50 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Apr 20 14:17:50 (none) user.info kernel: lirc_serial $Revision: 5.104 $ registered
Apr 20 14:17:51 (none) user.err vdr: [4268] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/mp3 expands to /mnt/sda2/mp3
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/avi expands to /mnt/sda2/avi
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/video0 expands to /mnt/sda2/video
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /etc/vdr/plugins/DVD-VCD expands to /mnt/sda1/mld-2.0.0/etc/vdr/plugins/DVD-VCD
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/images is a symbolic link
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/video1 not found/permission denied
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /media/camera not found/permission denied
Apr 20 14:17:59 (none) user.debug kernel: eth0: no IPv6 routers present
Apr 20 14:18:14 (none) user.err vdr: [4982] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.err vdr: [4985] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.info kernel: i2c /dev entries driver
Apr 20 14:18:14 (none) user.info kernel: it87: Found IT8705F chip at 0x290, revision 3
Apr 20 14:18:14 (none) authpriv.info dropbear[5120]: Running in background
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (FF) as /class/input/input3
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (FF) [PWRF]
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (CM) as /class/input/input4
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (CM) [PWRB]
Apr 20 14:18:14 (none) user.info kernel: ACPI: PNP0C0B:00 is registered as cooling_device0
Apr 20 14:18:14 (none) user.info kernel: ACPI: Fan [FAN] (on)
Apr 20 14:18:14 (none) user.info kernel: ACPI: ACPI0007:00 is registered as cooling_device1
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psargs-0355):
Apr 20 14:18:14 (none) user.info kernel: [RTMP] Namespace lookup failure, AE_NOT_FOUND
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psparse-0537):
Apr 20 14:18:14 (none) user.info kernel: Method parse/execution failed [_TZ_.THRM._TMP] (Node df816e50), AE_NOT_FOUND
Apr 20 14:18:29 (none) authpriv.info dropbear[5198]: Child connection from ::ffff:192.168.0.101:59499
Apr 20 14:18:34 (none) authpriv.notice dropbear[5198]: password auth succeeded for 'root' from ::ffff:192.168.0.101:59499
Apr 20 14:20:57 (none) authpriv.info dropbear[5205]: Child connection from ::ffff:192.168.0.101:59511
Apr 20 14:20:57 (none) authpriv.notice dropbear[5205]: password auth succeeded for 'root' from ::ffff:192.168.0.101:59511
Apr 20 14:16:55 (none) syslog.info syslogd started: BusyBox v1.9.2
Apr 20 14:16:55 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:16:55 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:55 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:55 (none) user.info kernel: EXT3 FS on sda1, internal journal
Apr 20 14:16:55 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:56 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:56 (none) user.info kernel: EXT3 FS on sda2, internal journal
Apr 20 14:16:56 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:17:00 (none) user.info kernel: Linux video capture interface: v2.00
Apr 20 14:17:00 (none) user.warn kernel: saa7146: register extension 'dvb'.
Apr 20 14:17:00 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 14:17:00 (none) user.warn kernel: saa7146: found saa7146 @ mem e0874000 (revision 1, irq 16) (0x13c2,0x0000).
Apr 20 14:17:01 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Apr 20 14:17:01 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:5b:af:8b
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: ves1x93: Detected ves1893a rev2
Apr 20 14:17:01 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (VLSI VES1x93 DVB-S)...
Apr 20 14:17:01 (none) user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Apr 20 14:17:01 (none) user.info kernel: dvb-ttpci: found av7110-0.
Apr 20 14:17:01 (none) user.err vdr: [2524] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: /dev/lircd: No such file or directory
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: remote control LIRC not ready!
Apr 20 14:17:49 (none) user.info kernel: 8139too Fast Ethernet driver 0.9.28
Apr 20 14:17:49 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Apr 20 14:17:49 (none) user.info kernel: eth0: RealTek RTL8139 at 0xe08e2000, 00:30:18:a2:59:e4, IRQ 19
Apr 20 14:17:49 (none) user.debug kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Apr 20 14:17:49 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 20 14:17:49 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 61
Apr 20 14:17:50 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Apr 20 14:17:50 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Apr 20 14:17:50 (none) user.info kernel: lirc_serial $Revision: 5.104 $ registered
Apr 20 14:17:51 (none) user.err vdr: [4268] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/mp3 expands to /mnt/sda2/mp3
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/avi expands to /mnt/sda2/avi
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/video0 expands to /mnt/sda2/video
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /etc/vdr/plugins/DVD-VCD expands to /mnt/sda1/mld-2.0.0/etc/vdr/plugins/DVD-VCD
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/images is a symbolic link
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/video1 not found/permission denied
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /media/camera not found/permission denied
Apr 20 14:17:59 (none) user.debug kernel: eth0: no IPv6 routers present
Apr 20 14:18:14 (none) user.err vdr: [4982] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.err vdr: [4985] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.info kernel: i2c /dev entries driver
Apr 20 14:18:14 (none) user.info kernel: it87: Found IT8705F chip at 0x290, revision 3
Apr 20 14:18:14 (none) authpriv.info dropbear[5120]: Running in background
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (FF) as /class/input/input3
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (FF) [PWRF]
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (CM) as /class/input/input4
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (CM) [PWRB]
Apr 20 14:18:14 (none) user.info kernel: ACPI: PNP0C0B:00 is registered as cooling_device0
Apr 20 14:18:14 (none) user.info kernel: ACPI: Fan [FAN] (on)
Apr 20 14:18:14 (none) user.info kernel: ACPI: ACPI0007:00 is registered as cooling_device1
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psargs-0355):
Apr 20 14:18:14 (none) user.info kernel: [RTMP] Namespace lookup failure, AE_NOT_FOUND
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psparse-0537):
Apr 20 14:18:14 (none) user.info kernel: Method parse/execution failed [_TZ_.THRM._TMP] (Node df816e50), AE_NOT_FOUND
Apr 20 14:18:29 (none) authpriv.info dropbear[5198]: Child connection from ::ffff:192.168.0.101:59499
Apr 20 14:18:34 (none) authpriv.notice dropbear[5198]: password auth succeeded for 'root' from ::ffff:192.168.0.101:59499
Apr 20 14:20:57 (none) authpriv.info dropbear[5205]: Child connection from ::ffff:192.168.0.101:59511
Apr 20 14:20:57 (none) authpriv.notice dropbear[5205]: password auth succeeded for 'root' from ::ffff:192.168.0.101:59511
Apr 20 14:16:55 (none) syslog.info syslogd started: BusyBox v1.9.2
Apr 20 14:16:55 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:16:55 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:55 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:55 (none) user.info kernel: EXT3 FS on sda1, internal journal
Apr 20 14:16:55 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Apr 20 14:16:56 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 20 14:16:56 (none) user.info kernel: EXT3 FS on sda2, internal journal
Apr 20 14:16:56 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 14:16:56 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2010-04-06 03:19:42 CEST)
Apr 20 14:17:00 (none) user.info kernel: Linux video capture interface: v2.00
Apr 20 14:17:00 (none) user.warn kernel: saa7146: register extension 'dvb'.
Apr 20 14:17:00 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 14:17:00 (none) user.warn kernel: saa7146: found saa7146 @ mem e0874000 (revision 1, irq 16) (0x13c2,0x0000).
Apr 20 14:17:01 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C)
Apr 20 14:17:01 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:5b:af:8b
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Apr 20 14:17:01 (none) user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Apr 20 14:17:01 (none) user.warn kernel: ves1x93: Detected ves1893a rev2
Apr 20 14:17:01 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (VLSI VES1x93 DVB-S)...
Apr 20 14:17:01 (none) user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Apr 20 14:17:01 (none) user.info kernel: dvb-ttpci: found av7110-0.
Apr 20 14:17:01 (none) user.err vdr: [2524] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: /dev/lircd: No such file or directory
Apr 20 14:17:02 (none) user.err vdr: [2524] ERROR: remote control LIRC not ready!
Apr 20 14:17:49 (none) user.info kernel: 8139too Fast Ethernet driver 0.9.28
Apr 20 14:17:49 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Apr 20 14:17:49 (none) user.info kernel: eth0: RealTek RTL8139 at 0xe08e2000, 00:30:18:a2:59:e4, IRQ 19
Apr 20 14:17:49 (none) user.debug kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Apr 20 14:17:49 (none) user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 20 14:17:49 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 61
Apr 20 14:17:50 (none) user.info kernel: lirc_serial: auto-detected active low receiver
Apr 20 14:17:50 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
Apr 20 14:17:50 (none) user.info kernel: lirc_serial $Revision: 5.104 $ registered
Apr 20 14:17:51 (none) user.err vdr: [4268] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/mp3 expands to /mnt/sda2/mp3
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/avi expands to /mnt/sda2/avi
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /data/video0 expands to /mnt/sda2/video
Apr 20 14:17:52 (none) user.err vdr: [4268] WARNING: source base /etc/vdr/plugins/DVD-VCD expands to /mnt/sda1/mld-2.0.0/etc/vdr/plugins/DVD-VCD
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/images is a symbolic link
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /data/video1 not found/permission denied
Apr 20 14:17:52 (none) user.err vdr: [4268] imageplugin: WARNING: source base /media/camera not found/permission denied
Apr 20 14:17:59 (none) user.debug kernel: eth0: no IPv6 routers present
Apr 20 14:18:14 (none) user.err vdr: [4982] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.err vdr: [4985] cTimeMs: using monotonic clock (resolution is 999848 ns)
Apr 20 14:18:14 (none) user.info kernel: i2c /dev entries driver
Apr 20 14:18:14 (none) user.info kernel: it87: Found IT8705F chip at 0x290, revision 3
Apr 20 14:18:14 (none) authpriv.info dropbear[5120]: Running in background
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (FF) as /class/input/input3
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (FF) [PWRF]
Apr 20 14:18:14 (none) user.info kernel: input: Power Button (CM) as /class/input/input4
Apr 20 14:18:14 (none) user.info kernel: ACPI: Power Button (CM) [PWRB]
Apr 20 14:18:14 (none) user.info kernel: ACPI: PNP0C0B:00 is registered as cooling_device0
Apr 20 14:18:14 (none) user.info kernel: ACPI: Fan [FAN] (on)
Apr 20 14:18:14 (none) user.info kernel: ACPI: ACPI0007:00 is registered as cooling_device1
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psargs-0355):
Apr 20 14:18:14 (none) user.info kernel: [RTMP] Namespace lookup failure, AE_NOT_FOUND
Apr 20 14:18:14 (none) user.warn kernel: ACPI Error (psparse-0537):
Apr 20 14:18:14 (none) user.info kernel: Method parse/execution failed [_TZ_.THRM._TMP] (Node df816e50), AE_NOT_FOUND

[MarMic]

also system ist komplett up2date?

in rc.conf driver=all drin stehen und danach ein reboot?

hmmm dann ist kein treiber für die karte da. welche karte ist es denn nochmal? aber nicht die tt1401 oder?

greetz

[naubaddi]

...Auf der DVB-S budget Karte steht "Philips, PICO 200 94V-0, DVB-S VER B1"...

Hi MarMic, jau alles erledigt und sie mag trotzdem nicht, nein es ist noch nicht die "tt1401" die ist noch mit der Post unterwegs. Die nicht genutzte Hardware fängt langsam an Platz zu verschwenden, aber es gibt schlimmeres. Immerhin habe ich 2 funktionierende VDRs mit je einer FF Karte und die MLD erfreut mich jedes mal wenn ich die Fernbedienung benutze     .

[MarMic]

ist es die hvr 3000 haupauge alles in einem teil?

wenn ja:

@claus dann fehlen im v4l treiber die cx88 treiber ein modprobe cx88 bringt nichts :-(
hatte das irgendwo bei nem hvr3000 log im netz gefunden:
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded

greetz

[naubaddi]

ist es die hvr 3000 haupauge alles in einem teil?...

Hi, nein es ist die TechnoTrend DVB-S FF Karte und eine Philips DVB-S budget Karte, ca. 8cm x 12cm klein und die Platine ist rot.

[MarMic]

wenn du rausfindest welchen treiber du brauchst dann wird man dir hier sicher weiterhelfen! aber ich bin erstmal mit meinem latain (was in der linuxwelt besonders winzig ist) zu ende

greetz

ps: evtl mal im vdr-portal anfragen evtl noch nen bild reinstellen