Hi,
auch nach längerem Warten kommt er nur bis zu dem folgenden Punkt. (replizierbar 3x neu gebootet und sogar einen weiteren DVD-Rohling ausprobiert!).
==start installation==
==partitioning disk sda==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
The number of cylinders for this disk is set to 953869.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-953869, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-953869, default 953869):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (2-953869, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-953869, default 953869):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (957-953869, default 957): Using default value 957
Last cylinder or +size or +sizeM or +sizeK (957-953869, default 953869): Using default value 953869
Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
64 heads, 32 sectors/track, 953869 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1957887 977920 83 Linux
/dev/sda2 1957888 1953523711 975782912 83 Linux
------ done ------
==format disk sda1==
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
61184 inodes, 244480 blocks
12224 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=251658240
8 block groups
32768 blocks per group, 32768 fragments per group
7648 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: 0/8^H^H^H1/8^H^H^H2/8^H^H^H3/8^H^H^H4/8^H^H^H5/8^H^H^H6/8^H^H^H7/8^H^H^Hdone
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
------ done ------
==format disk sda2==
meta-data=/dev/sda2 isize=256 agcount=4, agsize=60986432 blks
= sectsz=512 attr=2, projid32bit=0
data = bsize=4096 blocks=243945728, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0
log =internal log bsize=4096 blocks=119114, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
------ done ------
==install system on sda1==
mehr passiert dann nicht ;(
Also, ich sehe den Fehler nicht!!!
Gruß,
Pit
Users Online