[1] 2 3 ... 7 >>> Archiv / MLD 3.x / General / Mystique Satx-s2 Sky Xpress Dual
 

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« on: July 12, 2012, 14:38:12 »
Sind in MLD die Treiber für die Karte enthalten und wenn nicht was wird gebraucht um diese hinzu zu fügen?

MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4823
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #1 on: July 12, 2012, 15:30:17 »
wenn die treiber nicht im kernel treiber enthalten sind -> dann auch nicht in der MLD

wobei da immer vom NEUSTEN tree auszugehen ist, auch wenn wir nen älteren kernel haben ODER powarmans repo, oder ufos repo.

greetz MarMic
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #2 on: August 02, 2012, 17:00:30 »
So, nun hab ich mal wieder mehr Zeit mit MLD zu arbeiten.

@MarMic
Der Treiber ist vorhanden nur ist es der von Ufo und der unterstützt meine Karte nicht:

messages:
Code: [Select]
Aug  2 14:32:03 (none) user.info kernel: cx23885 driver version 0.0.3 loaded                                                                                    
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]: Your board isn't known (yet) to the driver.                                                                
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]: Try to pick one of the existing card configs via                                                            
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]: card=<n> insmod option.  Updating to the latest                                                            
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]: version might help as well.                                                                                
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:                                            
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=0 -> UNKNOWN/GENERIC                                                                                
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=1 -> Hauppauge WinTV-HVR1800lp                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=2 -> Hauppauge WinTV-HVR1800                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=3 -> Hauppauge WinTV-HVR1250                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=4 -> DViCO FusionHDTV5 Express                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=5 -> Hauppauge WinTV-HVR1500Q                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=6 -> Hauppauge WinTV-HVR1500                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=7 -> Hauppauge WinTV-HVR1200                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=8 -> Hauppauge WinTV-HVR1700                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=9 -> Hauppauge WinTV-HVR1400                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=10 -> DViCO FusionHDTV7 Dual Express                                                                
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=11 -> DViCO FusionHDTV DVB-T Dual Express                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=12 -> Leadtek Winfast PxDVR3200 H                                                                  
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=13 -> Compro VideoMate E650F                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=14 -> TurboSight TBS 6920                                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=15 -> TeVii S470                                                                                    
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=16 -> DVBWorld DVB-S2 2005                                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=17 -> NetUP Dual DVB-S2 CI                                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=18 -> Hauppauge WinTV-HVR1270                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=19 -> Hauppauge WinTV-HVR1275                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=20 -> Hauppauge WinTV-HVR1255                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=21 -> Hauppauge WinTV-HVR1210                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=22 -> Mygica X8506 DMB-TH                                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=23 -> Magic-Pro ProHDTV Extreme 2                                                                  
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=24 -> Hauppauge WinTV-HVR1850                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=25 -> Compro VideoMate E800                                                                        
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=26 -> Hauppauge WinTV-HVR1290                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=27 -> Mygica X8558 PRO DMB-TH                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=28 -> LEADTEK WinFast PxTV1200                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=29 -> GoTView X5 3D Hybrid                                                                          
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=30 -> NetUP Dual DVB-T/C-CI RF                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=31 -> Leadtek Winfast PxDVR3200 H XC4000                                                            
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=32 -> MPX-885                                                                                      
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=33 -> Mygica X8507                                                                                  
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=34 -> TerraTec Cinergy T PCIe Dual                                                                  
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=35 -> TeVii S471                                                                                    
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]:    card=36 -> Hauppauge WinTV-HVR1255                                                                      
Aug  2 14:32:03 (none) user.info kernel: CORE cx23885[0]: subsystem: 4254:0952, board: UNKNOWN/GENERIC [card=0,autodetected]                                    
Aug  2 14:32:03 (none) user.info kernel: cx23885_dev_checkrevision() Hardware revision = 0xa5                                                                    
Aug  2 14:32:03 (none) user.info kernel: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfe800000

Ich brauche den aus diesem Treiberpaket media_build_bst-120728.tar.gz von der dvbsky-Seite.
Da ich mich aber leider nicht auskenne wie ich den Treiber von dvbsky in das dvbtreiber-Paket bekomme hoffe ich das mir einer von euch helfen kann.

ich würde es auch selber erstellen wenn mir einer erklärt wie ich das machen kann (Develumgebung vorhanden).


MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20531
    • View Profile
    • ClausMuus.de
Mystique Satx-s2 Sky Xpress Dual
« Reply #3 on: August 03, 2012, 17:42:34 »
Hi,

DU könntest Dir das dvb-tbs Addon anschauen. Da wird auch nen anderes repro genommen. Somit könntest Du das mit etwas Geschick auf Deine Bedürfnisse umbauen und somit die Treiber selber kompilieren.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #4 on: August 22, 2012, 12:51:36 »
Ich bekomms einfach mit meinen wenigen Linuxkenntnissen nicht hin.

Habe schon einige Infos was gebraucht wird aber keine Ahnung wie ich das Makefile stricken muss.

Benötigte module:
Code: [Select]
tea5767 tda827x tuner-simple v4l tuner-types tda8290 xc4000 tea5761 mt2131 tda9887 xc5000 tuner-xc2028 tda18271 mt20xx mc44s803 rc-core lirc_dev dvb-core m88ds3103 cx23885 cx2341x tuner cx25840 ir-kbd-i2c videodev videobuf-dma-sg v4l2-common v4l2-int-device videobuf-core videobuf-dvb tveeprom btcx-risc
Configfile:
Code: [Select]
#
# Automatically generated file; DO NOT EDIT.
# V4L/DVB menu
#
# CONFIG_SND_MIRO is not set
CONFIG_INPUT=y
CONFIG_GPIOLIB=y
CONFIG_PM_RUNTIME=y
# CONFIG_ARCH_MX25 is not set
CONFIG_USB=m
# CONFIG_ARCH_DAVINCI_DM365 is not set
CONFIG_NEW_LEDS=y
CONFIG_FW_LOADER=y
# CONFIG_SPARC64 is not set
# CONFIG_PLAT_M32700UT is not set
CONFIG_SND_FM801=m
# CONFIG_ARCH_OMAP1 is not set
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_PLAT_S5P is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_GPIO_PCA953X is not set
CONFIG_RFKILL=m
# CONFIG_HAVE_CLK is not set
# CONFIG_FIQ is not set
CONFIG_DMADEVICES=y
# CONFIG_OMAP2_DSS is not set
CONFIG_REGULATOR=y
CONFIG_SND=m
# CONFIG_MT9M001_PCA9536_SWITCH is not set
# CONFIG_ARCH_OMAP2 is not set
CONFIG_FONT_8x16=y
# CONFIG_SPARC32 is not set
CONFIG_I2C_ALGOBIT=m
# CONFIG_SND_ISA is not set
# CONFIG_ARCH_AT91 is not set
CONFIG_INET=y
# CONFIG_SOC_IMX27 is not set
# CONFIG_ARCH_OMAP3 is not set
CONFIG_CRC32=y
CONFIG_SYSFS=y
CONFIG_MMC=m
# CONFIG_ISA is not set
# CONFIG_OMAP2_VRFB is not set
CONFIG_PCI=y
# CONFIG_TI_ST is not set
CONFIG_PARPORT_1284=y
CONFIG_FB_CFB_FILLRECT=y
# CONFIG_MT9V022_PCA9536_SWITCH is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_PARPORT=m
# CONFIG_PPC_MPC512x is not set
CONFIG_FB_VIA=m
# CONFIG_ARCH_DAVINCI_DM644x is not set
CONFIG_FIREWIRE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_NET=y
# CONFIG_I2C_GPIO is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_FB_CFB_COPYAREA=y
# CONFIG_PXA27x is not set
# CONFIG_OMAP_IOVMM is not set
# CONFIG_SGI_IP22 is not set
CONFIG_ISA_DMA_API=y
CONFIG_I2C=m
# CONFIG_ARCH_DAVINCI_DM355 is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_ARCH_MMP is not set
CONFIG_MODULES=y
CONFIG_HAS_IOMEM=y
CONFIG_DMA_ENGINE=y
# CONFIG_MACH_MX27 is not set
# CONFIG_MACH_DAVINCI_DM6467_EVM is not set
CONFIG_MFD_CORE=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_HAS_DMA=y
# CONFIG_BLACKFIN is not set
CONFIG_X86=y
CONFIG_FB=y
# CONFIG_STI_CONSOLE is not set
# CONFIG_ARCH_MX1 is not set
CONFIG_LEDS_TRIGGERS=y
CONFIG_SONY_LAPTOP=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_PNP=y
# CONFIG_MX3_IPU is not set
CONFIG_SND_PCM=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_ARCH_SHMOBILE is not set
CONFIG_EXPERIMENTAL=y
# CONFIG_M32R is not set
CONFIG_LEDS_CLASS=y
CONFIG_BITREVERSE=y
# CONFIG_VIDEO_KERNEL_VERSION is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_NET is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_RC_CORE=m
CONFIG_LIRC=m
# CONFIG_RC_MAP is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_LIRC_CODEC is not set
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_V4L_PCI_DRIVERS=y
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CX18 is not set
CONFIG_VIDEO_CX23885=m
# CONFIG_MEDIA_ALTERA_CI is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_V4L_ISA_PARPORT_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported ddbridge ('Octopus') Adapters
#
# CONFIG_DVB_DDBRIDGE is not set

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV6110x is not set

#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_TDA18271C2DD is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_M88DS3103=m
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRXD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_DIB9000 is not set
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_HD29L2 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_RTL2830 is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_LNBP22 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_A8293 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set
# CONFIG_DVB_IT913X_FE is not set
# CONFIG_DVB_M88RS2000 is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_AUDIO_SUPPORT is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_STAGING is not setHier mal das Treiberpaket : media_build_bst-120728.tar.gz
und die Firmwares : dvbsky-firmware.zip

Wenn einer mir vielleicht das Makefile erstellen könnte dann probier ich es aus.

Danke schonmal im vorraus


MegaX
media_build_bst-120728.tar.gz
Logged
Gruß MegaX

Hardware (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #5 on: August 23, 2012, 17:47:45 »
Gibts hier niemanden der mir vielleicht damit helfen könnte??

Möchte ungern von MLD weg, aber wenn ich die Karte hier nicht ans laufen bekomme bleibt mir nix anderes mehr übrig.


MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline skippy

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 2280
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #6 on: August 23, 2012, 18:00:11 »
Hi MegaX,
ich kann dir da leider nicht helfen, ist doch für jemand wie mich, der fast ausschließlich nur die fertigen MLD-Pakete verwendet, ziemlich speziell. So sehr viele Spezialisten gibt es bei der MLD wohl nicht und momentan ist Urlaubszeit. Hab noch etwas Geduld. Hier sind alle sehr bemüht und wenn es jemanden gibt, der dir auch nur ansatzweise helfen kann, meldet er sich bestimmt.

Viele Grüße skippy
Logged
meine MLDs (show / hide)

Offline Christian

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1531
    • View Profile
    • http://www.minidvblinux.de
Mystique Satx-s2 Sky Xpress Dual
« Reply #7 on: August 23, 2012, 18:34:42 »
Quote
Gibts hier niemanden der mir vielleicht damit helfen könnte??

Möchte ungern von MLD weg, aber wenn ich die Karte hier nicht ans laufen bekomme bleibt mir nix anderes mehr übrig.


MegaX
Ich guck's mir mal an . Leider nur dann wenn meine Kinder schlafen und ich noch etwas zeit habe.

Liebe Grüße
Logged
__________________________________________

"...ich schreibe 80% meiner Beiträge aus dem Kopf ... bitte nicht schlagen wenn mal ein Path nicht passt :) ..."

MFG Christian

Nokia Sat DBox2 + Multicam

Hardware VDR: ASUS E35M1-I Deluxe, 4GB RAM, ATI 6XXX onboard, TT S2-6400 FF, Samsung 500GB 2,5"

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #8 on: August 24, 2012, 13:15:32 »
Quote
Ich guck's mir mal an .
Danke Christian

Ich habe es nun einmal geschafft das Treiberpaket zu bauen, er wird aber nicht geladen.
Wenn ich mit modprobe cx23885 versuche nachzuladen bekomme ich einen Fehler:
Code: [Select]
modprobe: can't load module tda18271 (kernel/drivers/media/common/tuners/tda18271.ko): invalid module format

Hab mir dann gedacht das ich irgendwo nen Fehler gemacht habe und bin dann hergegangen und habe meine Develumgebung auf Kernel 3.3.1 upgedatet und das Treiberpaket darunter bauen lassen und installiert.

Danach hab ich die erstellten Treiber aus der Devel nach MLD kopiert, nen depmod gemacht und einen reboot. Nun bekomm ich folgenede Fehlermeldung nach modprobe cx23885:
Code: [Select]
modprobe: can't load module altera_stapl (kernel/drivers/linux/drivers/misc/altera-stapl/altera-stapl.ko): invalid module format
Ich hab echt keinen Plan mehr was da schief läuft.



MegaX

 
Logged
Gruß MegaX

Hardware (show / hide)

Offline Christian

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1531
    • View Profile
    • http://www.minidvblinux.de
Mystique Satx-s2 Sky Xpress Dual
« Reply #9 on: August 24, 2012, 15:25:35 »
Quote
Quote
Ich guck's mir mal an .
Danke Christian

Ich habe es nun einmal geschafft das Treiberpaket zu bauen, er wird aber nicht geladen.
Wenn ich mit modprobe cx23885 versuche nachzuladen bekomme ich einen Fehler:
Code: [Select]
modprobe: can't load module tda18271 (kernel/drivers/media/common/tuners/tda18271.ko): invalid module format

Hab mir dann gedacht das ich irgendwo nen Fehler gemacht habe und bin dann hergegangen und habe meine Develumgebung auf Kernel 3.3.1 upgedatet und das Treiberpaket darunter bauen lassen und installiert.

Danach hab ich die erstellten Treiber aus der Devel nach MLD kopiert, nen depmod gemacht und einen reboot. Nun bekomm ich folgenede Fehlermeldung nach modprobe cx23885:
Code: [Select]
modprobe: can't load module altera_stapl (kernel/drivers/linux/drivers/misc/altera-stapl/altera-stapl.ko): invalid module format
Ich hab echt keinen Plan mehr was da schief läuft.



MegaX
gegen die develumgebung zu bauen wird nicht gehen. du musst gegen den Kernel aus dem MLD Src bauen.

Du musst über ein Addon gehen. Wie schaut dein Addon Makefile aus?

Claus hatte ja als Beispiel Addon das dvb-tbs genannt,

MFG
Christian
Logged
__________________________________________

"...ich schreibe 80% meiner Beiträge aus dem Kopf ... bitte nicht schlagen wenn mal ein Path nicht passt :) ..."

MFG Christian

Nokia Sat DBox2 + Multicam

Hardware VDR: ASUS E35M1-I Deluxe, 4GB RAM, ATI 6XXX onboard, TT S2-6400 FF, Samsung 500GB 2,5"

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #10 on: August 24, 2012, 16:36:17 »
Das Problem ist das ich mich mit dem Makefile nicht auskenne.

Ich hab es auch nur einmal hin bekommen das er mir ein addon baut das aber mit Sicherheit fehlerhaft war.
Wie ich das geschafft hatte frag mich nicht, denn ich hab mir irgendwie die Develumgebung geschossen und sie danach neu aufgesetzt.
Makefile hab ich vergessen zu sichern, sorry.

Seitdem ich die Devel neu gemacht habe bekomm ich es mit meinen paar Linux-Kenntnissen nicht mehr hin ein Makefile zu erstellen.
Hab das auch noch nie gemacht und deswegen gefragt ob mir hier einer helfen kann da ich echt nur herumgepfuscht habe.



MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #11 on: August 26, 2012, 13:04:17 »
@Christian
Wollt mal nachfragen ob du schon dazu gekommen bist dir das ganze mal anzuschauen?



MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline Christian

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1531
    • View Profile
    • http://www.minidvblinux.de
Mystique Satx-s2 Sky Xpress Dual
« Reply #12 on: August 26, 2012, 13:56:29 »
Quote
@Christian
Wollt mal nachfragen ob du schon dazu gekommen bist dir das ganze mal anzuschauen?



MegaX
Noch nicht , vll nachher ... Meine kleinen (4j und 1m) bringen mich ganz schön in Zeitmangel.

Grüße Christian
Logged
__________________________________________

"...ich schreibe 80% meiner Beiträge aus dem Kopf ... bitte nicht schlagen wenn mal ein Path nicht passt :) ..."

MFG Christian

Nokia Sat DBox2 + Multicam

Hardware VDR: ASUS E35M1-I Deluxe, 4GB RAM, ATI 6XXX onboard, TT S2-6400 FF, Samsung 500GB 2,5"

Offline MegaX

  • Administrator
  • Expert Member
  • ********
  • Posts: 1822
    • View Profile
Mystique Satx-s2 Sky Xpress Dual
« Reply #13 on: August 26, 2012, 19:15:38 »
Quote
Noch nicht , vll nachher ... Meine kleinen (4j und 1m) bringen mich ganz schön in Zeitmangel.

Grüße Christian
Das kommt mir sehr bekannt vor. Unsere kleine (6jahre) hält uns auch sehr auf Trapp, was manchmal die Frage aufschmeisst:
"Wo hab ich nur den Tacker hingelegt" :))  :))

Ich hoffe mal das du noch Zeit findest und bedank mich schonmal bei dir :) .



MegaX
Logged
Gruß MegaX

Hardware (show / hide)

Offline Christian

  • MLD-Developer
  • Expert Member
  • ******
  • Posts: 1531
    • View Profile
    • http://www.minidvblinux.de
Mystique Satx-s2 Sky Xpress Dual
« Reply #14 on: August 26, 2012, 23:00:54 »
so,

ich habe ein System-Addon "dvb-satx" ins svn geladen.... bitte einmal testen

Ich benötige vom Tester :

/var/log/messages
 
und die ausgabe von

"lsmod" auf der Konsole. (Damit ich genau weiß welche Module tatsächlich benötigt werden)

DANKE
Logged
__________________________________________

"...ich schreibe 80% meiner Beiträge aus dem Kopf ... bitte nicht schlagen wenn mal ein Path nicht passt :) ..."

MFG Christian

Nokia Sat DBox2 + Multicam

Hardware VDR: ASUS E35M1-I Deluxe, 4GB RAM, ATI 6XXX onboard, TT S2-6400 FF, Samsung 500GB 2,5"

[1] 2 3 ... 7 >>> Archiv / MLD 3.x / General / Mystique Satx-s2 Sky Xpress Dual
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.