Hallo Claus.
Ich habe gleich heute morgen ein Update durchgeführt.
Seither spinnt das System und ich bekomme massenweise folgende Meldung:
ERROR: ld.so: object '/usr/lib/libmediaclient.so' from /etc/ld.so.preload cannot be preloaded: ignored.
Was kann ich tun?
Gruss
Snorre
Update:
Ich habe nun /usr/lib/libmediaclient.so' in /etc/ld.so.preload auskommentiert.
Die Meldungen sind weg, aber es geht trotzdem nichts.
Hier noch verschiedene Ausgaben des System. Ich hoffe das hilft!
MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.11.158 (nightbuild@armv6) (gcc version 4.6.3 (Debian 4.6.3-14+rpi1) ) #2 PREEMPT Fri Oct 11 15:50:41 CEST 2013
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 98304
[ 0.000000] free_area_init_node: node 0, pgdat c05f04d4, node_mem_map c0698000
[ 0.000000] Normal zone: 768 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=896 bcm2708_fb.fbheight=512 bcm2708.boardrev=0xd bcm2708.serial=0x46b44624 smsc95xx.macaddr=B8:27:EB:B4:46:24 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p1 initrd=/boot/initrd splash=silent quiet QUIET=1 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 384MB = 384MB total
[ 0.000000] Memory: 379584k/379584k available, 13632k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05981f0 (5697 kB)
[ 0.000000] .init : 0xc0599000 - 0xc05ba19c ( 133 kB)
[ 0.000000] .data : 0xc05bc000 - 0xc05f0c20 ( 212 kB)
[ 0.000000] .bss : 0xc05f0c44 - 0xc0697078 ( 666 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000355] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060108] pid_max: default: 32768 minimum: 301
[ 0.060416] Mount-cache hash table entries: 512
[ 0.061118] Initializing cgroup subsys cpuacct
[ 0.061142] Initializing cgroup subsys devices
[ 0.061156] Initializing cgroup subsys freezer
[ 0.061167] Initializing cgroup subsys blkio
[ 0.061238] CPU: Testing write buffer coherency: ok
[ 0.061549] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.061659] Setting up static identity map for 0x433f88 - 0x433fe4
[ 0.071108] NET: Registered protocol family 16
[ 0.075817] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.079785] bcm2708.uart_clock = 0
[ 0.088545] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.088569] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.088581] mailbox: Broadcom VideoCore Mailbox driver
[ 0.088657] bcm2708_vcio: mailbox at f200b880
[ 0.089024] bcm_power: Broadcom power driver
[ 0.089047] bcm_power_open() -> 0
[ 0.089056] bcm_power_request(0, 8)
[ 0.589727] bcm_mailbox_read -> 00000080, 0
[ 0.589746] bcm_power_request -> 0
[ 0.589757] Serial: AMBA PL011 UART driver
[ 0.589884] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.669719] bio: create slab <bio-0> at 0
[ 0.672593] SCSI subsystem initialized
[ 0.673356] usbcore: registered new interface driver usbfs
[ 0.673726] usbcore: registered new interface driver hub
[ 0.674228] usbcore: registered new device driver usb
[ 0.678393] Switching to clocksource stc
[ 0.678606] FS-Cache: Loaded
[ 0.679086] CacheFiles: Loaded
[ 0.709448] NET: Registered protocol family 2
[ 0.710251] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.710686] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.710940] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.710983] TCP: reno registered
[ 0.711001] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.711030] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.711296] NET: Registered protocol family 1
[ 0.711781] RPC: Registered named UNIX socket transport module.
[ 0.711802] RPC: Registered udp transport module.
[ 0.711811] RPC: Registered tcp transport module.
[ 0.711820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.712131] Trying to unpack rootfs image as initramfs...
[ 1.145903] Freeing initrd memory: 3352K
[ 1.147133] bcm2708_dma: DMA manager at f2007000
[ 1.154665] bcm2708_gpio: bcm2708_gpio_probe c05c9d88
[ 1.166104] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 1.221443] audit: initializing netlink socket (disabled)
[ 1.221515] type=2000 audit(1.210:1): initialized
[ 1.389739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.389838] FS-Cache: Netfs 'nfs' registered for caching
[ 1.398890] NFS: Registering the id_resolver key type
[ 1.399003] Key type id_resolver registered
[ 1.399019] Key type id_legacy registered
[ 1.402425] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 1.411649] aufs 3.x-rcN
[ 1.411699] msgmni has been set to 747
[ 1.417099] io scheduler noop registered
[ 1.417125] io scheduler deadline registered
[ 1.417169] io scheduler cfq registered (default)
[ 1.454169] Console: switching to colour frame buffer device 112x32
[ 1.793215] brd: module loaded
[ 1.959694] loop: module loaded
[ 1.978652] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[ 2.011110] usbcore: registered new interface driver smsc95xx
[ 2.020751] usbcore: registered new interface driver cdc_ncm
[ 2.020783] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.245340] Core Release: 2.80a
[ 2.245368] Setting default values for core params
[ 2.245410] Finished setting default values for core params
[ 2.450498] Using Buffer DMA mode
[ 2.450521] Periodic Transfer Interrupt Enhancement - disabled
[ 2.450530] Multiprocessor Interrupt Enhancement - disabled
[ 2.450540] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.450555] Dedicated Tx FIFOs mode
[ 2.450737] dwc_otg: Microframe scheduler enabled
[ 2.450786] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.450836] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.450890] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.450959] Init: Port Power? op_state=1
[ 2.450968] Init: Power Port (0)
[ 2.451077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.451097] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.451114] usb usb1: Product: DWC OTG Controller
[ 2.451130] usb usb1: Manufacturer: Linux 3.6.11.158 dwc_otg_hcd
[ 2.451144] usb usb1: SerialNumber: bcm2708_usb
[ 2.459076] hub 1-0:1.0: USB hub found
[ 2.459140] hub 1-0:1.0: 1 port detected
[ 2.466545] dwc_otg: FIQ enabled
[ 2.466574] dwc_otg: NAK holdoff enabled
[ 2.466609] Module dwc_common_port init
[ 2.468592] Initializing USB Mass Storage driver...
[ 2.474851] usbcore: registered new interface driver usb-storage
[ 2.474882] USB Mass Storage support registered.
[ 2.481250] usbcore: registered new interface driver libusual
[ 2.490810] mousedev: PS/2 mouse device common for all mice
[ 2.516400] rtc-test rtc-test.0: rtc core: registered test as rtc0
[ 2.529081] rtc-test rtc-test.1: rtc core: registered test as rtc1
[ 2.551502] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[ 2.551651] bcm2835-cpufreq: switching to governor powersave
[ 2.551665] bcm2835-cpufreq: switching to governor powersave
[ 2.551692] cpuidle: using governor ladder
[ 2.551703] cpuidle: using governor menu
[ 2.563328] sdhci: Secure Digital Host Controller Interface driver
[ 2.563355] sdhci: Copyright(c) Pierre Ossman
[ 2.563488] sdhci: Enable low-latency mode
[ 2.575076] Registered led device: mmc0::
[ 2.618581] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 2.618650] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 2.624917] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.636605] Registered led device: led0
[ 2.658720] Indeed it is in host mode hprt0 = 00021501
[ 2.686265] usbcore: registered new interface driver usbhid
[ 2.686293] usbhid: USB HID core driver
[ 2.686791] TCP: cubic registered
[ 2.686806] Initializing XFRM netlink socket
[ 2.686858] NET: Registered protocol family 17
[ 2.687016] Key type dns_resolver registered
[ 2.687338] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.713269] mmc0: read SD Status register (SSR) after 2 attempts
[ 2.717647] registered taskstats version 1
[ 2.720403] mmc0: new high speed SDHC card at address e624
[ 2.723168] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
[ 2.723888] Freeing init memory: 132K
[ 2.755249] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 2.760603] mmcblk0: p1
[ 3.018776] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.018940] Indeed it is in host mode hprt0 = 00001101
[ 3.268935] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 3.268966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.280608] hub 1-1:1.0: USB hub found
[ 3.280791] hub 1-1:1.0: 3 ports detected
[ 3.558789] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.659172] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.659203] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.677840] smsc95xx v1.0.4
[ 3.757123] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b4:46:24
[ 3.848827] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 3.950983] usb 1-1.2: New USB device found, idVendor=7392, idProduct=7811
[ 3.951014] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.951031] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 3.951046] usb 1-1.2: Manufacturer: Realtek
[ 3.951060] usb 1-1.2: SerialNumber: 00e04c000001
[ 4.048859] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 4.149356] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101
[ 4.149387] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.149403] usb 1-1.3: Product: USB 2.0 Hub
[ 4.167643] hub 1-1.3:1.0: USB hub found
[ 4.167874] hub 1-1.3:1.0: 4 ports detected
[ 4.448783] usb 1-1.3.1: new high-speed USB device number 6 using dwc_otg
[ 4.549395] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101
[ 4.549410] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.549419] usb 1-1.3.1: Product: USB 2.0 Hub
[ 4.559967] hub 1-1.3.1:1.0: USB hub found
[ 4.560187] hub 1-1.3.1:1.0: 4 ports detected
[ 4.838838] usb 1-1.3.1.1: new high-speed USB device number 7 using dwc_otg
[ 4.939322] usb 1-1.3.1.1: New USB device found, idVendor=04b4, idProduct=2830
[ 4.939355] usb 1-1.3.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.049174] usb 1-1.3.1.4: new low-speed USB device number 8 using dwc_otg
[ 5.177521] usb 1-1.3.1.4: New USB device found, idVendor=0a81, idProduct=0101
[ 5.177552] usb 1-1.3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.177568] usb 1-1.3.1.4: Product: USB Keyboard
[ 5.177583] usb 1-1.3.1.4: Manufacturer: CHESEN
[ 5.208200] input: CHESEN USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.4/1-1.3.1.4:1.0/input/input0
[ 5.223952] hid-generic 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-bcm2708_usb-1.3.1.4/input0
[ 5.259234] input: CHESEN USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.4/1-1.3.1.4:1.1/input/input1
[ 5.276638] hid-generic 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-bcm2708_usb-1.3.1.4/input1
[ 9.231479] aufs test_add:264:mount[816]: uid/gid/perm /mnt/system 0/0/0755, 0/0/01777
[ 9.375823] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
[ 9.389365] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.477526] aufs test_add:264:mount[826]: uid/gid/perm /mnt/rootimg 1002/1002/0755, 0/0/01777
[ 10.099489] aufs test_add:264:mount[886]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 1002/1002/0755
[ 10.237998] aufs test_add:264:mount[900]: uid/gid/perm /var/spool/apm.mnt/ntp-client 0/0/0777, 1002/1002/0755
[ 10.372960] aufs test_add:264:mount[913]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 1002/1002/0755
[ 10.511060] aufs test_add:264:mount[928]: uid/gid/perm /var/spool/apm.mnt/lib-av 0/0/0777, 1002/1002/0755
[ 10.648056] aufs test_add:264:mount[942]: uid/gid/perm /var/spool/apm.mnt/dvb-sundtek 0/0/0777, 1002/1002/0755
[ 10.787398] aufs test_add:264:mount[956]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 1002/1002/0755
[ 10.924403] aufs test_add:264:mount[970]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 1002/1002/0755
[ 11.119115] aufs test_add:264:mount[987]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 1002/1002/0755
[ 11.298797] aufs test_add:264:mount[1003]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 1002/1002/0755
[ 11.512792] aufs test_add:264:mount[1022]: uid/gid/perm /var/spool/apm.mnt/network-wireless 0/0/0777, 1002/1002/0755
[ 11.714719] aufs test_add:264:mount[1040]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 1002/1002/0755
[ 11.913024] aufs test_add:264:mount[1058]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 1002/1002/0755
[ 12.113589] aufs test_add:264:mount[1075]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 1002/1002/0755
[ 12.626775] aufs test_add:264:mount[1095]: uid/gid/perm /var/spool/apm.mnt/vc 0/0/0777, 1002/1002/0755
[ 13.061476] aufs test_add:264:mount[1111]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 1002/1002/0755
[ 13.500745] aufs test_add:264:mount[1131]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 1002/1002/0755
[ 13.939026] aufs test_add:264:mount[1148]: uid/gid/perm /var/spool/apm.mnt/femon 0/0/0777, 1002/1002/0755
[ 14.383490] aufs test_add:264:mount[1166]: uid/gid/perm /var/spool/apm.mnt/osdteletext 0/0/0777, 1002/1002/0755
[ 14.834092] aufs test_add:264:mount[1186]: uid/gid/perm /var/spool/apm.mnt/rpihddevice 0/0/0777, 1002/1002/0755
[ 15.286373] aufs test_add:264:mount[1204]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 1002/1002/0755
[ 15.742499] aufs test_add:264:mount[1222]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 1002/1002/0755
[ 31.257323] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
MLD> lsmod
Module Size Used by Not tainted
MLD> apm cc
MLD> apm update-all
apm: no updates available
MLD> route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default fritz.box 0.0.0.0 UG 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
MLD> ifconfig
eth0 Link encap:Ethernet HWaddr B8:27:EB:B4:46:24
inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:606 errors:0 dropped:0 overruns:0 frame:0
TX packets:518 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:123069 (120.1 KiB) TX bytes:98445 (96.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2014 (1.9 KiB) TX bytes:2014 (1.9 KiB)
MLD>
Eigentlich müssten die Module für den Lirc-Empfänger, den WLAN-Adapter und die USB-Opera geladen sein.
Vorab vielen Dank.
Users Online