1 [2] Archiv / MLD 4.x / Banana PI / DVBSKy S960 DVB-S/S2 USB
 

Offline mafe68

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 2389
  • Immer auf der Suche nach was neuem!
    • View Profile
    • Mediastreambox
DVBSKy S960 DVB-S/S2 USB
« Reply #15 on: March 29, 2015, 00:42:14 »
Das DVBSky Paket gab es bist vor kurzen noch nicht für das Bpi. Das hat Andi erst gebaut aber da hast du recht das es im DVB Paket auch beim BPi rein gekommen ist.
Logged
Gruß Mario
Meine Hardware (show / hide)

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #16 on: March 29, 2015, 09:07:21 »
^Hallo
Ich habe bei der Neuinstallation überhauptnichts zusätzlich aufgespielt.
Ich habe momentan den BPI nicht angeschlossen.
System
Name:    MLD
Version:    4.0.1-bpi
Package    Version
alsa    1.0.27.2-20_3.4.103.164
at    3.1.14-2
base    0-65
btrfs    3.12-90
busybox    1.23.1-38
dvb    1:2015.03.20-120_3.4.103.164
eventlircd    2015.03.20-24_3.4.103.164
font-config    0-4
hdparm    9.43-2
i2c    0-4_3.4.103.164
init    0-63
install    0-82
irkeytable    1.0.1-7
kernel    3.4.103.164-165
ldconfig    2.19-10
lirc    1:2014.05.09-65_3.4.103.164
locales    0-16
mld-remote    0-31
network    0-46_3.4.103.164
opkg    2015.03.01-84
opkg-fixes    0-3
pam    1.1.8-3
psplash    2009.05.28-17
samba    4.1.6-18
scan    20130331-42
ssh    0-11
tools    0-13
udev    204-31
vdr    2.2.0.174-176
vdr-plugin-opkg    0.1.0-23_2.2.0.174
vdr-plugin-setup    0.3.1-26_2.2.0.174
vdr-plugin-softhddevice    2015.03.10-53_2.2.0.174
vfat    0-1
webserver    0-192
xfs    0-5
xorg    1.15.1-48_3.4.103.164
Disks

Filesystem                Size      Used Available Use% Mounted on
/dev/root                 9.3G    129.4M      8.9G   1% /
/dev/mmcblk0p2            9.3G    129.4M      8.9G   1% /media/sd-mmcblk0p2
/dev/mmcblk0p3           21.5G     32.2M     21.5G   0% /media/sd-mmcblk0p3

Modules

Module                  Size  Used by    Tainted: G 
mt2060                  4509  1
af9013                 22286  1
dvb_usb_af9015         24084  1
dvb_usb_v2             27524  1 dvb_usb_af9015
dvb_core              108360  1 dvb_usb_v2
rc_core                22054  3 dvb_usb_af9015,dvb_usb_v2
uinput                  6485  0
i2c_dev                 7377  0

Status

Mem: 130032K used, 651752K free, 396K shrd, 1684K buff, 74380K cached
CPU:   0% usr   5% sys   0% nic  95% idle   0% io   0% irq   0% sirq

Network

eth0      Link encap:Ethernet  HWaddr 02:03:07:00:90:FC 
          inet addr:192.168.2.126  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:730 errors:0 dropped:0 overruns:0 frame:0
          TX packets:400 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:87466 (85.4 KiB)  TX bytes:288128 (281.3 KiB)
          Interrupt:117

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:67 errors:0 dropped:0 overruns:0 frame:0
          TX packets:67 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3847 (3.7 KiB)  TX bytes:3847 (3.7 KiB)


Gruß
Manfred
« Last Edit: March 29, 2015, 13:08:43 by sailer »
Logged

Offline Torsten73

  • Expert Member
  • *****
  • Posts: 584
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #17 on: March 29, 2015, 19:13:47 »
Da fehlt auf jeden Fall was, zum Vergleich:

Code: [Select]
Module                  Size  Used by    Tainted: G
...
rc_dvbsky                909  0
...
dvb_usb_dvbsky          7337 22
dvb_usb_v2             13154  1 dvb_usb_dvbsky
...
dvb_core               85027  3 m88ds3103,dvb_usb_dvbsky,dvb_usb_v2
...
rc_dvbsky,dvb_usb_dvbsky,dvb_usb_v2,ir_xmp_decoder,ir_mce_kbd_decoder,ir_sharp_decoder,ir_sony_decoder,ir_sanyo_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,rc_rc6_mce,mceusb
...

was bringt Dein

Code: [Select]
MLD-Raspi2> dmesg | grep dvb
[   12.582460]  dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
[   12.582460]  v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[   12.765445]  dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
[   12.765445]  v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[   13.000302] usb 1-1.5: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[   13.001922] usb 1-1.5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.003438] usb 1-1.5: dvb_usb_v2: MAC address: 00:18:42:54:96:0c
[   13.159959] Registered IR keymap rc-dvbsky
[   13.161092] usb 1-1.5: dvb_usb_v2: schedule remote query interval to 300 msecs
[   13.161130] usb 1-1.5: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[   13.161335] usbcore: registered new interface driver dvb_usb_dvbsky
[   34.539542] i2c i2c-2: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'

Meines Erachtens nach dürfte sich dein Bpi nicht anders verhalten. Erstmal muß dmesg passen. Wird eine Firmware geladen? Zur Not noch die lsusb Ausgabe.
Logged
Gruß
Torsten

---------------------------------------------------------------------------------------------------------------------------------------------
System 1: Beebox N3150 MLD 5.3
System 2: Proxmox Ve mit OMV, MLD 5.1 Server
System 3+4: ITX Atom 525 Nvidia Ion MLD 5.1

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #18 on: April 04, 2015, 16:55:51 »
/var/log/messages
Code: [Select]
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114582] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114589] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114598] b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114606] c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114614] experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.114626] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235703] WARNING: You are using an experimental version of the media stack.
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235728] As the driver is backported to an older kernel, it doesn't offer
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235735] enough quality for its usage in production.
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235740] Use it with care.
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235744] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235752] dd0a6fe2bc3055cd61e369f97982c88183b1f0a0 [media] dvb-usb-dvbsky: fix i2c adapter for sp2 device
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235760] b6851419409664bc564ce5148bbec1141944c710 [media] m88ds3103: change ts clock config for serial mode
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235769] c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235776] experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
Apr  4 16:28:52 (MLD-BPI) user.err kernel: [    8.235788] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
Apr  4 16:28:52 (MLD-BPI) user.info kernel: [    8.497872] usb 4-1: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
Apr  4 16:28:52 (MLD-BPI) user.info kernel: [    8.506623] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
Apr  4 16:28:52 (MLD-BPI) user.info kernel: [    8.512755] DVB: registering new adapter (DVBSky S960/S860)
Apr  4 16:28:52 (MLD-BPI) user.info kernel: [    8.522512] usb 4-1: dvb_usb_v2: MAC address: 00:17:42:54:96:01
Apr  4 16:28:53 (MLD-BPI) user.info kernel: [    8.736145] device fsid bf237b3e-4e31-4b78-84c7-bfd99551853e devid 1 transid 206 /dev/mmcblk0p2
Apr  4 16:28:53 (MLD-BPI) user.warn kernel: [    8.772733] m88ds3103: Unknown symbol i2c_del_mux_adapter (err 0)
Apr  4 16:28:53 (MLD-BPI) user.warn kernel: [    8.780173] m88ds3103: Unknown symbol i2c_add_mux_adapter (err 0)
Apr  4 16:28:53 (MLD-BPI) user.err kernel: [    8.785294] DVB: Unable to find symbol m88ds3103_attach()
Apr  4 16:28:53 (MLD-BPI) user.err kernel: [    8.788932] usb 4-1: dvbsky_s960_attach fail.
Apr  4 16:28:53 (MLD-BPI) user.info kernel: [    8.810807] usbcore: registered new interface driver dvb_usb_dvbsky
Apr  4 16:28:53 (MLD-BPI) user.warn kernel: [    8.819587] REISERFS warning (device mmcblk0p1): super-6502 reiserfs_getopt: unknown mount option "nls=utf8"
Apr  4 16:28:53 (MLD-BPI) user.err kernel: [    9.066873] UDF-fs: bad mount option "nls=utf8" or missing value
Apr  4 16:28:53 (MLD-BPI) user.warn kernel: [    9.086330] XFS (mmcblk0p1): unknown mount option [nls].
Apr  4 16:28:53 (MLD-BPI) user.warn kernel: [    9.170608] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (1)
Apr  4 16:28:53 (MLD-BPI) user.notice kernel: [    9.187475] XFS (mmcblk0p3): Mounting Filesystem
Apr  4 16:28:53 (MLD-BPI) user.info kernel: [    9.352631] XFS (mmcblk0p3): Ending clean mount
Apr  4 16:28:57 (MLD-BPI) user.info kernel: [   13.027188] device fsid bf237b3e-4e31-4b78-84c7-bfd99551853e devid 1 transid 206 /dev/mmcblk0p2
Apr  4 16:29:05 (MLD-BPI) user.err vdr: video/vdpau: doesn't support yuvy video surface
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.027984] Warning: this sunxi disp driver will see significant redesign.
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.032720] Applications using /dev/disp directly will break.
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.047760] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.050773] [DISP] layer allocated: 0,101
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.053746] [DISP] layer allocated: 0,102
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.474991] [DISP] layer released: 0,101
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.477910] [DISP] layer released: 0,102
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.481948] [DISP] layer allocated: 0,101
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.499551] [DISP] layer allocated: 0,102
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.557389] [DISP] layer released: 0,101
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.560281] [DISP] layer released: 0,102
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.564313] [DISP] layer allocated: 0,101
Apr  4 16:29:05 (MLD-BPI) user.warn kernel: [   21.567294] [DISP] layer allocated: 0,102
Apr  4 16:29:08 (MLD-BPI) user.debug kernel: [   24.254511] GMAC gpio_power_hd:gpio_direction_output
Apr  4 16:29:09 (MLD-BPI) user.warn kernel: [   24.936945] eth0: device MAC address 02:03:07:00:90:fc
Apr  4 16:29:09 (MLD-BPI) user.info kernel: [   25.152003] sunxi_gmac: probed
Apr  4 16:29:09 (MLD-BPI) user.info kernel: [   25.161572] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
Apr  4 16:29:09 (MLD-BPI) user.info kernel: [   25.177021] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
Apr  4 16:29:10 (MLD-BPI) daemon.err smbd[1184]: [2015/04/04 16:29:10.608977,  0] ../source3/lib/util_sock.c:446(open_socket_in)
Apr  4 16:29:10 (MLD-BPI) daemon.err smbd[1184]:   open_socket_in(): setsockopt: SO_REUSEPORT = true on port 445 failed with error = Protocol not available
Apr  4 16:29:13 (MLD-BPI) user.info kernel: [   29.184519] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
Apr  4 16:29:38 (MLD-BPI) auth.info login[1786]: root login on 'tty1'
Apr  4 16:29:38 (MLD-BPI) auth.info login[1787]: root login on 'tty2'
Apr  4 16:29:38 (MLD-BPI) auth.info login[1790]: root login on 'tty3'
Apr  4 16:29:38 (MLD-BPI) auth.info login[1794]: root login on 'tty4'System
Packages
Code: [Select]
Name: MLD
Version: 4.0.1-bpi
Package Version
alsa 1.0.27.2-20_3.4.103.164
at 3.1.14-2
base 0-65
btrfs 3.12-90
busybox 1.23.1-38
dvb 1:2015.03.20-120_3.4.103.164
eventlircd 2015.03.20-24_3.4.103.164
font-config 0-4
hdparm 9.43-2
i2c 0-4_3.4.103.164
init 0-63
install 0-82
irkeytable 1.0.1-7
kernel 3.4.103.164-165
ldconfig 2.19-10
lirc 1:2014.05.09-65_3.4.103.164
locales 0-16
mld-remote 0-31
network 0-46_3.4.103.164
opkg 2015.03.01-84
opkg-fixes 0-3
pam 1.1.8-3
psplash 2009.05.28-17
samba 4.1.6-18
scan 20130331-42
ssh 0-11
tools 0-13
udev 204-31
vdr 2.2.0.174-176
vdr-plugin-opkg 0.1.0-23_2.2.0.174
vdr-plugin-setup 0.3.1-26_2.2.0.174
vdr-plugin-softhddevice 2015.03.10-53_2.2.0.174
vfat 0-1
webserver 0-192
xfs 0-5
xorg 1.15.1-48_3.4.103.164
Disks
Code: [Select]
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 9.3G    130.8M      8.9G   1% /
/dev/mmcblk0p2            9.3G    130.8M      8.9G   1% /media/sd-mmcblk0p2
/dev/mmcblk0p3           21.5G     32.2M     21.5G   0% /media/sd-mmcblk0p3
Modules
Code: [Select]
Module                  Size  Used by    Tainted: G 
dvb_usb_dvbsky          8120  0
dvb_usb_v2             27524  1 dvb_usb_dvbsky
dvb_core              108360  2 dvb_usb_dvbsky,dvb_usb_v2
rc_core                22054  2 dvb_usb_dvbsky,dvb_usb_v2
uinput                  6485  0
i2c_dev                 7377  0
Status
Code: [Select]
Mem: 126276K used, 655508K free, 344K shrd, 1684K buff, 74756K cached
CPU:   0% usr   4% sys   0% nic  95% idle   0% io   0% irq   0% sirq
Network
Code: [Select]
eth0      Link encap:Ethernet  HWaddr 02:03:07:00:90:FC 
          inet addr:192.168.2.126  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2846 errors:0 dropped:0 overruns:0 frame:0
          TX packets:730 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:235932 (230.4 KiB)  TX bytes:502083 (490.3 KiB)
          Interrupt:117

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:119 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6915 (6.7 KiB)  TX bytes:6915 (6.7 KiB)
hallo
Ich hoffe ihr könnt etwas damit anfangen.
Er zeigt das modul an , aber es funktionirt nicht (0 Empfänger)
gruß
Manfred


Edit:// Bitte das nächste mal Code-Blöcke benutzen. Danke MegaX
« Last Edit: April 04, 2015, 18:51:46 by MegaX »
Logged

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #19 on: April 10, 2015, 15:45:42 »
hallo
Ich habe jetzt den neuen Raspi dieses DVBSky Paket eingespielt , da funktioniert es. Beim Bananapi ist kein extra Paket dabei. Vieleicht ist das der Grund.
Wenn ich das DVB und das Sky Paket einspiele funktioniert es auch nicht.
Gruß
Manfred
Ich habe noch eine Frage.
Wie komme ich an das drunter liegende Linux ,(Konsole)?
« Last Edit: April 10, 2015, 15:53:24 by sailer »
Logged

Offline skippy

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 2280
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #20 on: April 10, 2015, 17:46:36 »
Hallo Manfred,

auf die Konsole kommst du mit einem SSH-Client. Weit verbreitet ist da z.B. Putty. Im Feld Host Adress gibst du die IP deines Raspi ein und wählst als Connection type "ssh". Dann auf den Button Open klicken. Jetzt solltest du die Konsole deine Raspi sehen und kannst dich dort mit dem Benutzernamen "root" anmelden. Das Passwort ist ebenfalls "root".

Viele Grüße skippy
Logged
meine MLDs (show / hide)

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #21 on: April 12, 2015, 08:40:08 »
hallo Skippy
Das habe ich schon gewusst , aber bei zB. LINVdr konnte man über die Verbindung Alt und F Tasten auf 4 Konsolen umschalten.
Ich wollte wissen ob das auch mit MLD funktioniert ?
Gruß
Manfred
Logged

Offline skippy

  • MLD-Tester
  • Expert Member
  • ******
  • Posts: 2280
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #22 on: April 12, 2015, 09:51:22 »
Hallo Manfred,
das funktioniert bei der MLD auch. Allerdings werden diese Konsolen beim RPi und BPi zumindest bei mir durch das Fernsehbild überlagert und sind damit nicht nutzbar.
Viele Grüße skippy
Logged
meine MLDs (show / hide)

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #23 on: April 12, 2015, 10:02:53 »
danke
Logged

Offline sailer

  • Newbie
  • *
  • Posts: 39
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #24 on: April 15, 2015, 14:08:54 »
Hallo
Wird das Sky Paket noch kommen ?
Gruß
Manfred
« Last Edit: April 15, 2015, 17:32:11 by sailer »
Logged

Offline warp10

  • Newbie
  • *
  • Posts: 43
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #25 on: May 12, 2015, 13:34:23 »
Hallo,

Quote
Wird das Sky Paket noch kommen ?

Das würde mich auch sehr interessieren  :)

Viele Grüße,
Thorsten
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20533
    • View Profile
    • ClausMuus.de
DVBSKy S960 DVB-S/S2 USB
« Reply #26 on: May 13, 2015, 12:13:50 »
Ich bin grad nicht ganz sicher, aber der BPI verwendet noch einen recht alten Kernel, und für den lässt sich das dvb-sky wohl nicht bauen. Sobald wir da auf nen neueren Kernel wechseln können, wird's wohl auch dvb-sky geben. Das wird aber noch ein Bischen dauern.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline warp10

  • Newbie
  • *
  • Posts: 43
    • View Profile
DVBSKy S960 DVB-S/S2 USB
« Reply #27 on: September 14, 2015, 21:01:23 »
Hallo Claus,

ist der Kernel eigentlich mittlerweile aktualisiert?  ::)

Viele Grüße,
Thorsten
Logged

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20533
    • View Profile
    • ClausMuus.de
DVBSKy S960 DVB-S/S2 USB
« Reply #28 on: September 14, 2015, 21:56:58 »
Nein, ein neuerer Kernel kann noch immer nicht verwendet werden. Wir werden das aber bei Gelegenheit mal wieder testen.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 6.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 22TB HDD - Lian Li PC-C37B - Samsung LE40A559

1 [2] Archiv / MLD 4.x / Banana PI / DVBSKy S960 DVB-S/S2 USB
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.