[gr4vity]

Yeah, Sound settings has pass through option if i use xineliboutput however that option is removed if i use softhddevice.

I also have a problem regarding a Logitech USB audio hub that doesn't work with softhddevice.

[MarMic]

Yeah, Sound settings has pass through option if i use xineliboutput however that option is removed if i use softhddevice.

I also have a problem regarding a Logitech USB audio hub that doesn't work with softhddevice.

PT is an feature of the frontend. SHD is also able to PT the sound. But you need to setup ONE output device (as far as I know).
The other thing: is it something like an external sound card with speakers in it? why else should someone use USB for speakers?
-> maybe this is to special (no kernel drivers) for MLD. We cannot support every single hardware.

best regards

MarMic

[gr4vity]

Hi MarMic,
I can't find any PT option if i use SHD even if i setup one output device.

The USB audio hub got speakers inside it and also a subwoofer, it doesn't need any special driver because it works fine under Ubuntu.

It also work(partially) if i used PT with xineliboutput.

However, it doesn't work at all with SHD because there is no PT option.

Best regards

[MarMic]

sure there is one. I am using it!

menu/setup (VDR)/plugin/softhddevice -> Audio (something like this)

best regards

MarMic

[gr4vity]

Thank you for replying, i'm talking about webif sound options.
Please check the attachments.
SHD doesn't have pass through USB as xineliboutput
I had done that through setup already but the USB audio hub still doesn't work with SHD.
Although it's recognized

Code: [Select]

[  763.865077] usb 1-3: new high-speed USB device number 8 using ehci-pci
[  763.984506] usb 1-3: New USB device found, idVendor=05e3, idProduct=0607
[  763.984507] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  763.984509] usb 1-3: Product: USB2.0 Hub
[  763.984922] hub 1-3:1.0: USB hub found
[  763.985256] hub 1-3:1.0: 4 ports detected
[  764.256156] usb 1-3.4: new full-speed USB device number 9 using ehci-pci
[  764.351724] usb 1-3.4: New USB device found, idVendor=046d, idProduct=0a0e
[  764.351726] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  764.351727] usb 1-3.4: Product: AudioHub Speaker
[  764.351728] usb 1-3.4: Manufacturer: HOLTEK
[  764.374155] input: HOLTEK  AudioHub Speaker as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.4/1-3.4:1.2/0003:046D:0A0E.0004/input/input15
[  764.426269] hid-generic 0003:046D:0A0E.0004: input,hidraw0: USB HID v1.10 Device [HOLTEK  AudioHub Speaker] on usb-0000:00:1d.7-3.4/input2
Any other suggestions?

Best regards

[gr4vity]

@mikeM, i'm sorry because i had posted my problem inside your topic.
I didn't want to create a new topic for it since you have the same issue.

[mikeM]

@gr4vity no problem!

Michael

[MarMic]

Why is IT once 1 0 USB and once 0 0 USB.

Try IT with 1 0 and shd Plugin Options - Don t forget to restart vdr

For the Syntax but IT IS hard to write english on a German Android phone

[clausmuus]

Only xineliboutput Plugn need to setup PT by Webif setup. If you use softhddevice you must setup it in the VDR OSD like you already do.
But I think MarMics comment is more important. You have select different output devices for xineliboutput and softhddevice.

[gr4vity]

I'm sorry for the confusion i caused. the right setting for the Logitech USB audio hub that worked with xineliboutput is 0 0 USB Audio.
1 0 USB was for a USB headset.

I tried everything as you guys suggested but it works with xineliboutput with PT USB option.
(Although it's partially suppoprted as i wrote earlier)

The audio hub volume control doesn't work so i had to change volume using keyboard.

However, it doesn't work at all using SHD. 

[gr4vity]

If you use softhddevice you must setup it in the VDR OSD like you already do.

Softhddevice setup doesn't have PT USB.
There are:
- PCM
- AC-3
- E-AC-3

[clausmuus]

That's options for the sound codec inside the videos, and not for the divice.
With PT you can not controle the volume by the VDR. For this you must use the volume control of the soundbar (I hope I remember right).

[gr4vity]

I have no problem to change volume using keyboard with xineliboutput but the audio hub doesn't work at all using SHD, (no sound comes out of the speakers or the subwoofer)
That's the problem.

[rfehr]

You are using a USB-Soundcard ?

[gr4vity]

You are using a USB-Soundcard ?

I unplugged it already to focus on the USB audio hub problem.